وصف السلعة
Наливные полы СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS это полимерная композиция на основе эпоксидной смолы для устройства трудногорючих, дезактивируемых, радиационно-стойких, антистатических, беспыльных монолитных покрытий промышленных полов объектов атомной отрасли, а также для применения в жилищном, гражданском и промышленном строительстве ( в соответствии с экспертным заключением ФБУН «СЗНЦ гигиены и общественного здоровья»)
Область применения:
производственные, складские, технические помещения радиационно-опасных производств и объектов, осуществляющих разработку, производство, эксплуатацию, хранение, транспортировку и утилизацию радиационно-опасных материалов.
жилищное, гражданское и промышленное строительство, в том числе в пищевой, фармацевтической и химической промышленности, складских и подсобных помещениях.
на объектах бытового обслуживания, медицинских и образовательных учреждениях, в том числе в детских садах, спортивных сооружениях, торговых и выставочных залах.
Преимущества:
Используя материал СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS для устройства наливных полов, можно
повысить уровень пожарной безопасности и радиационной стойкости,
придать антистатические свойства
усилить износостойкость,
усилить ударопрочность,
уменьшить истираемость покрытий,
снизить затраты на дезактивацию помещений,
создать долговечное покрытие,
придать эстетические свойства покрытию цветными чипсами.
Ценность материала СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS:
дезактивируемость и радиационная стойкость;
защита от жидких агрессивных средств;
химическая стойкость и устойчивость к жидким агрессивным средам;
трудногорючесть (пожарная безопасность при эксплуатации);
антистатические свойства покрытия (защита оборудования и приборов, в том числе компьютеров и серверов)
высокая адгезия, прочность при истирании и при ударе;
не содержит токсичных и пожароопасных растворителей;
СПЕЦПЛАСТ-109М имеет 2 варианта покрытия:
I тип при ремонте старых наливных полимерных полов и при устройстве новых покрытий. Толщина покрытия 1,5-3 мм.
II тип при первоначальном устройстве наливных полов с высокими механическими нагрузками на покрытия. Толщина покрытия 4,5-8 мм
СПЕЦПЛАСТ-109М AS•покрытие, обладающее всеми свойствами Спецпласт 109М и кроме того являющееся антистатическим. Толщина покрытия – 2мм
Расход материала:
Практический расход материала однослойное покрытие (Тип I) для толщиной 3 мм – 6 кг/м2 (включая грунтовку – 0,3 кг/м2).
Практический расход материала двуслойное покрытия (Тип II) для толщиной 8 мм — 15,7кг/м2 (включая грунтовку).
Практический расход материала на антистатическое покрытие – 3,58кг/м2 (включая грунтовку и резистивный слой)
Качество СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS подтверждается:
соответствием требованиям ГОСТ Р51102 «Покрытия полимерные защитные дезактивируемые»,
включен в ОСТ 95 10590 «Полимерные покрытия для атомных станций».,
разрешительной документацией (сертификаты, заключения, свидетельства),контролем аттестованной лабораторией каждой партии готовой продукции,
сертификатом системы менеджмента соответствия требованиям ISO9001 (качество), ISO14001 (экология), OHSAS18001 (безопасность),
отзывами Заказчиков (Ленинградской, Смоленской, Кольской АЭС и др.),
рекомендациями Концерна «Росаэнергоатом» о применении СПЕЦПЛАСТ-109М на АЭС,
одобрением научно-проектных организаций (ФГУП НИТИ, ВНИПИЭТ).
Выгода сотрудничества с АО «СПЕЦХИММИОНТАЖ»:
надежность поставки,
снижение затрат за счет покупки СПЕЦПЛАСТ-109М у производителя.
высокое качество выполняемых работ по устройству наливных полов СПЕЦПЛАСТ-109М,
квалифицированные специалисты СПЕЦХИММОНТАЖ готовы выполнить любой объем работ по устройству наливных полов (объем работ собственными силами более 300 000 м.кв. с 1993г. ) ,
наличие разрешительной документации ( имеется свидетельство СРО о допуске, лицензия Ростехнадзор, лицензия ФСБ),
обучение ваших специалистов технологии бездефектногонанесения напольного покрытия СПЕЦПЛАСТ-109М,
Продукция СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS, которую мы изготавливаем специально для вас, поможет повысить культуру производства, пожарную и радиационную безопасность помещений объектов атомной отрасли, защитить от статического электричества приборы и оборудование.
СПЕЦПЛАСТ-109М – торговая марка АО "СПЕЦХИММОНТАЖ", технология запатентована.Композиция полимерная СПЕЦПЛАСТ-109М и СПЕЦПЛАСТ-109М AS изготовляется в соответствии с ТУ 5772-010-23356171-2015.Производство работ по устройству полов на основе композиции «Спецпласт-109М и СПЕЦПЛАСТ-109М AS» проводят в соответствии с технологическим регламентом ТР СХМ-109М-2015.
В 2009 г. предприятия приняло участие в самом массовом в стране конкурсе в области качества — Всероссийском конкурсе Программы «100 лучших товаров России». По результатам пройденных 2-х этапов Конкурса выпускаемая продукция «Спецпласт-109М» стала Лауреатом Конкурса в номинации «Продукция производственно-технического назначения»- композиция полимерная Спецпласт-109М.По результатам Конкурса ведущий специалист предприятия, занимающийся разработками данной продукции, был удостоен знака «За достижения в области качества».
قراءة المزيد
تحقق من التوافر
حدد السعر
0
0
USD
أجل الحد الأدنى: 25 кг
القدرة على التسليم: 1 кг/في الأسبوع
АО "СПЕЦХИММОНТАЖ"
مورد لم يتم التحقق منه
روسيا
معلومات الشحن
احسب واستكمل نقل البضائع الخاصة بك إلى أي مكان في العالم باستخدام Qoovee Logistics.
شحنة مضمونة في الوقت المحدد ودفع آمن احسب الشحن من Qooveeمنتجات مماثلة
DINIL PLUS
أوزبكستان
USD
0.6/шт
0.6
Вентиляционная решетка пластиковая- круглая отлично подходит для прикрытия отверстия в стене, в потолке или для закрытия вентиляционного канала Изготовлена из качественного материала ABS. Экологически чистая, прочная. Для подключения к круглым воздуховодам 125 мм, монтаж с помощью монтажного фланца
DINIL PLUS
أوزبكستان
USD
0.8/шт
0.8
Люк ревизионный пластиковый 200х300 мм Люк-дверца ревизионный пластиковый с ручкой. Для доступа к скрытым узлам и инженерным коммуникациям. Предназначен для установки в стене или потолке. Оснащен ручкой для удобства открытия/закрытия люка. Возможно использование во влажных помещениях. Простой уход. Монтаж осуществляется при помощи раствора или клея.
ТОО ЗЛАТАРЬ
كازاخستان
USD
16.35 - 54.49/шт
شبكات تكييف الهواء من الفولاذ المقاوم للصدأ في تصميم نهائي ولأمر فردي.
Best Choice Ukraine
Киев, أوكرانيا
USD
6.32/шт
6.32
Garden path mold Round Stones 80x80x6 cm
Garden paths create a chic view of the suburban area, which add tidiness and nobility.
Concrete paths are durable and very practical. They are not afraid of any atmospheric conditions and are easy to clean.
At the present time, it is possible to make a concrete path with your own hands using special forms. Such a path will not only create comfort and coziness, but also emphasize the design of your site.
Drawing - an imitation of natural stone will help to create a mold for making a garden path. Round Stones 80x80x6 cm. This plastic mold consists of 9 cells that have an arbitrary shape and are connected together. They form a certain pattern, while the shape is designed in such a way that it allows the slabs to be joined together in any direction, to obtain tracks of the required width, as well as to make turns (bends), while the joints are absolutely indistinguishable.
It is also possible to adjust the color scheme of the garden path using various additives. With this form, you can easily decorate the paths in the garden or playground and you will be satisfied with the work done with your own hands.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the shape for the garden path Round stones:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 1.56 pcs
Pattern: round stones
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 9 pcs
Finished board height: 60.0 mm
Finished stone height: 60.0 mm
Volume: 40 l
Length: 800.0 mm
Width: 800.0 mm
Height: 60.0 mm
Weight: 1.6kg
Volume weight: 9.6 kg
Best Choice Ukraine
Киев, أوكرانيا
USD
4.5/шт
4.5
Garden path mold Castle Stone 60x60x6 cm
It has become easier to create comfort and coziness in the garden. You can make an unusual geometric design, similar to a composition from a natural stone, without a lot of time. You don't need to match each item individually. Simply pour the solution into the garden mold. From the resulting slabs, you can easily create a decorated walkway.
The garden path mold will serve you for a long time, as it is made of wear-resistant polypropylene. You can always use it to create an additional pedestrian zone in the garden.
The walkway will emphasize the design of your site, as the pattern is similar to a natural stone composition.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the mold for the garden path Castle Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Pattern: imitation of a wild stone
Number of stones in the form: 9 pcs
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 2.78 pcs
Finished board height: 20.0 mm
Finished stone height: 40.0 mm
Length: 600.0 mm
Width: 600.0 mm
Height: 60.0 mm
Weight: 1.7kg
Best Choice Ukraine
Киев, أوكرانيا
USD
5.54/шт
5.54
Garden path mold Castle Stone 60x60x6 cm with handles
An integral element of a well-groomed garden is a garden path, which allows you to comfortably move through it and not worry about the ground sticking to your shoes.
With minimal knowledge of construction and little effort, it is easier to pour a concrete path than to lay tiles. To make it as quickly and easily as possible, use a unique modern development - a special stencil that looks like cells that realistically imitate natural stones.
An unusual geometric design will allow you to make an easy-to-use shape for a garden path Castle Stone 60x60x6 cm with handles.
The garden path mold is made of wear-resistant polypropylene and is equipped with 2 handles for convenience. You just need to pour the solution into it, and after partial hardening, the form can be removed. Provided manufacturer's warranty for up to 1000 pouring cycles.
For a unique design, it is recommended to add a color pigment directly to the solution.
Benefits of using a garden path mold:
Quickness of manufacture - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the mold for the garden path Castle Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Pattern: imitation of a wild stone
Number of stones in the form: 9 pcs
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 2.78 pcs
Finished board height: 20.0 mm
Finished stone height: 40.0 mm
Length: 600.0 mm
Width: 600.0 mm
Height: 60.0 mm
Weight: 1.7kg
Best Choice Ukraine
Киев, أوكرانيا
USD
3.68/шт
3.68
Form for a garden path Old Town 60x40x6 cm
A garden path on the site not only creates a beautiful view and comfort, but also is an excellent protection for your shoes from the ground, dirt and dust.
Thanks to modern technologies, it is possible to make the coating independently, which gives complete confidence in its quality.
Plastic mold Old City 60x40x6 cm for laying a concrete path will help you to model and lay your garden path or playground in the shortest possible time.
It is reusable, made of durable material - polypropylene. On the slab there are 9 decorative stones 11x18cm, the seam depth is 2 cm. The wall thickness is 4 mm, the edging of the stone is 2 mm. In places of loading, stiffeners are implemented, which allows it to withstand 1000 moldings.
To use it, it is enough to prepare a concrete solution. The shape fits well on either side, allowing you to make the track seamless.
If we compare the total costs, then a do-it-yourself garden path made of concrete, obtained using a form, will cost less than laying tiles or pebbles.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the form for the garden path Old Town:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 4.17 pcs
Pattern: Old Town
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 9 pcs
Finished board height: 60 mm
Finished stone height: 60 mm
Length: 600.0 mm
Width: 400.0 mm
Height: 60.0 mm
Best Choice Ukraine
Киев, أوكرانيا
USD
3.68/шт
3.68
Garden path mold Universal Stone 60x40x6 cm
A beautiful view of the countryside provides a decor that should be combined with the rest of the garden. Its main element is a practical and unique garden path or playground, which can be easily modeled and created with your own hands using plastic molds and a concrete grout.
An excellent solution for a plot that is decorated in a strict, classical or modern style would be the use of an unusual shape for the garden path Universal Stone 60x40x6 cm, the design of which is designed for convenient work with concrete.
It is a sturdy and secure shape with strong edges. Its feature is the presence of technological holes for handles, which is convenient when pouring large areas. During the first molding, special cavities in the inner seam are filled with mortar, which gives the form additional strength.
The drawing of the shape is two large and two small triangles. The outer frame is made in such a way that it can be easily docked even with molds from other manufacturers.
For the uniqueness of the design, it is possible to adjust the color scheme of the garden path with the help of various additives.
By making your own coating, you will be sure not only of its quality, but also of budget savings.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the form for the garden path Universal Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 4.17 pcs
Pattern: universal stone
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 4 pieces
Finished board height: 60 mm
Finished stone height: 60 mm
Length: 600.0 mm
Width: 400.0 mm
Height: 60.0 mm
Weight: 1.0KG
فئة الموردين
جميع الموردين في الفئة
المنتج:
المورد:
أوامر الحد الأدنى:
المديرية
قسم المبيعات:
قسم المبيعات:
قسم المبيعات:
المعلومات
أبلغ مدير أنك وجدت المنتج على Qoovee
جهات اتصال الموارد غير متاحة!
اكتب رسالة إلى المورد