وصف السلعة
Incorporated in the TABER V-5 Stiffness Tester is a bi-directional pendulum weighing system. Providing an accurate and responsive method for measuring small load increments, this system is a critical component for determining material stiffness or resiliency. Nine (9) distinct ranges permit testing of materials that are extremely lightweight and flexible (such as cellophane or thin metallic foils) to items that are very rigid (such as plastics).For test ranges 2 - 9, specimens are mounted on the Taber V-5 Stiffness Tester using a clamping system. Located on the pendulum, the lower faces of the specimen clamp jaws are exactly on the center of rotation. This ensures a constant test length and deflection angle for accurate and repeatable results. Both jaws of the specimen clamp are adjustable, so the test specimen can be positioned precisely in the center regardless of material thickness. Force is applied to the lower end of the specimen by a pair of rollers. The rollers, which are attached to a driving disc located directly behind the pendulum, push against the test specimen and deflect it from its vertical position. The pendulum applies increasing torque to the specimen as it deflects further from its original position. The test point reading occurs when the pendulum mark aligns with the appropriate driving disc mark (7 1/2° or 15°), which points to the stiffness reading on the dial point. The final reading will depend on the range in which the test is being conducted and what scaling factor to use. The instrument outputs the moment load applied to the test specimen in TABER Stiffness Units (g · cm).Note: The right hand roller includes a ratchet stop mechanism that greatly reduces the potential for inter-operator error caused by over or under-tightening. The travel on the right hand assembly automatically stops when the roller contacts the specimen.To allow the testing of materials with different stiffness properties, range weights can be applied to the pendulum. For extremely light weight materials, a compensator range weight is mounted to the top of the pendulum. Range weights of 500, 1000 and 2000 "Taber Units" are mounted to the bottom of the pendulum and required for stiffer materials. An optional range weight set of 3000 and 5000 Taber units is required for test ranges 7, 8 and 9.Range 1 is used with Taber's optional Sensitivity Range Attachment (also referred to as SR or High Sensitivity Attachment) to test extremely lightweight and flexible materials whose Taber Stiffness Unit value are between 0 - 1. Examples include cellophane, natural fibres and synthetic filaments, tissue paper, metallic foils, films, etc. The attachment includes two parts, the Driven Pins Holder which is secured between the clamp jaws, and the Driving Pins Holder which is mounted to the studs in place of the left and right hand rollers. Both parts include precision pins that are oriented horizontal to the face of the V-5 Stiffness Tester. A specimen 1 1/2" x 1 1/2" is mounted such that the second and fourth pins are above the specimen. As the driving disc rotates, the fourth pin of the Driving Pins Holder pushes down on the specimen while the first pin pushes up. As the sample is deflected, the Driven Pins Holder aligns the pendulum to the appropriate stiffness value. For Range 1, the specimen is only deflected to the right.Many customers have also utilized the Taber V-5 Stiffness Tester to evaluate wire and cable stiffness characteristics. The tester now incorporates a "v-notch" in the clamps to accommodate this testing. Suggested samples are 70mm long and 3mm - 8mm in diameter, and centered in the notch with care so as to not pinch or crimp the sample. For wire and cable samples less than 3mm diameter, it is recommended to secure the sample at a location in the flat region of the clamp. Samples with curvature may interfere with proper set-up and function of the Stiffness tester and should be avoided. In addition, test results obtained should be used for comparison only - that is, between lots, between materials, etc.
قراءة المزيد
في الأوراق المالية
15102.0
USD/قطعة
15102.0
USD
أجل الحد الأدنى: 1 шт
القدرة على التسليم: 15 шт/في الشهر
Energid Instruments
مورد لم يتم التحقق منه
الهند
معلومات الشحن
احسب واستكمل نقل البضائع الخاصة بك إلى أي مكان في العالم باستخدام Qoovee Logistics.
شحنة مضمونة في الوقت المحدد ودفع آمن احسب الشحن من Qooveeمنتجات مماثلة
Chocolate Fiesta
روسيا
USD
2070.79/шт
2070.79
3D printer Chocolate Fiesta One makes products from chocolate glaze and chocolate.
With help of Chocolate Fiesta One you can easily turn your idea into a unique chocolate figure. We provide customers with technical support and detailed instructions.
Print speed: up to 100 mm / s
Nozzles: 0.6, 0.8, 1mm
Working print area: 200 x 200 x 150 mm
Computer connection: USB / WiFi
Print type: 2D, 2.5D, 3D
Print type (number of colors): single color
3D printers are developed and assembled in St. Petersburg, Russia. All devices are certified on the territory of EEUManufacturer's warranty - 1 year.
Chocolate Fiesta
روسيا
USD
2724.72/шт
2724.72
3D printer Chocolate Fiesta Double makes products from chocolate glaze and chocolate. The Double version has an additional extruder - it allows you to print two colors of chocolate at the same time! Print speed: up to 50 mm / s Nozzles: 0.6, 0.8, 1mm Working print area: 180 x 200 x 100 mm Computer connection: USB / WiFi Print type: 2D, 2.5D, 3D Print type (number of colors): one-color, two-color 3D printers are developed and assembled in St. Petersburg, Russia. All devices are certified on the territory of the EEU. Manufacturer's warranty - 1 year.
USD
176.97/шт
176.97
خزانة مطهر شاشة تعمل باللمس مقاس 2.4 بوصة تستخدم لعدد الأشخاص والإعدادات إعداد الرش من 1 إلى 10 ثوانٍ
LLC Ukrprommineral
Днепр, أوكرانيا
USD
8825.0/шт
8825.0
تم تصميم الشاشات بالقصور الذاتي من النوع الخفيف للفرز الميكانيكي للمواد السائبة أو المتكتلة حسب الحجم. إنها مناسبة بشكل مثالي لمناولة الفحم والحصى والأحجار المكسرة في الصناعة غير المعدنية مع حجم فاصل من 2 إلى 100 مم.
LLC Ukrprommineral
Днепр, أوكرانيا
USD
8825.0/шт
8825.0
تم تصميم الشاشات عالية التردد للغربلة الجافة أو الرطبة للمواد السائبة بكتلة لا تزيد عن 2.8 طن / متر مكعب ، وإزالة السماد ، والجفاف ، وأيضًا تعليق الغسيل من منتجات الإثراء. يمكن استخدامه للرمل والخامات وأنواع أخرى من المواد.
LLC Ukrprommineral
Днепр, أوكرانيا
USD
8825.0/шт
8825.0
تم تصميم الشاشات بالقصور الذاتي ذاتية التوازن لغربلة المواد السائبة بكثافة كبيرة تبلغ 1.4 طن / متر مكعب . يتم استخدامها في عمليات نزع الماء ، وإزالة الرطب والجاف ، وغربلة الفحم ، والأنثراسايت والصخر الزيتي ، وكذلك لفصل المعلق عن منتجات الإثراء.
LLC Ukrprommineral
Днепр, أوكرانيا
USD
29878.0/шт
29878.0
نحن منخرطون في تطوير صناعات وهندسة جديدة - دمج المعدات المختلفة في الخطوط الحالية والمصانع المشاركة في: معالجة المواد غير المعدنية. معالجة الخبث المعدني والتخلص من النفايات المحتوية على معادن والتخلص من النفايات الصناعية ؛ معالجة والتخلص من نفايات البناء ؛ إنتاج مواد البناء. اكتسبت شركتنا خبرة كبيرة في مجال البحوث المعملية لمختلف المواد الخام المعدنية: الخامات ، المواد غير المعدنية ، الفحم. باستخدام فريق التصميم الخاص بنا جنبًا إلى جنب مع التقنيين ، نحن على استعداد لأداء مهام ذات تعقيد تقني متفاوت.
LLC Ukrprommineral
Днепр, أوكرانيا
USD
65803.15/шт
65803.15
إنتاج خطوط غسيل معيارية شبه متحركة لفصل (إثراء) الرمل حسب فئات الحجم: 0.05 ؛ 0.071 ؛ 0.1 ؛ 0.16 ؛ 0.2 ؛ 0.63 ؛ 1.0 ؛ 2.0 و 5.0 ملم. تم تصميم هذه النماذج من محطات الغرابيل الهيدروسيكلونية المنخلية SGU بقدرات مختلفة: 20 طنًا / ساعة ، 40 طنًا / ساعة ، 60 طنًا / ساعة ، 120 طنًا / ساعة. يمكن تعديل كل من هذه التركيبات وفقًا لمتطلبات العملاء الفردية (حمأة الفحم ، والرمل ، وغربلة الحجر الجيري والجرانيت ، والنفايات المعدنية ، وحمأة محطات الطاقة الحرارية ، وما إلى ذلك). نموذج نموذجي لـ SSU يتكون من: - مستنقع اللب المتداول ، والذي يتلقى مادة البداية والماء ، ولكن غالبًا ما يتم توفير التعليق المحضر ؛ - وحدة التصنيف ، التي تتكون من مضخة الطين التي تخلق الضغط اللازم لتغذية الملاط ، ودوران حلزوني بالقطر المطلوب (الذي يؤثر على الإنتاجية) والشكل (الذي يؤثر على حجم الفصل) ، ويفصل المنتج المستهدف المائي "رمال" و "الصرف" المعلق الذي يحتوي على جزيئات مغبرة وطينية (عادة ما تكون نفايات للتخصيب) ، بالإضافة إلى خطوط الأنابيب ومعدات الإغلاق ؛ - تجفيف غربال GVCh عالي التردد بمناخل خاصة (بولي يوريثان أو يوريتان مطاطي أو مناخل من الفولاذ المقاوم للصدأ) ، مما يجعل المنتج النهائي يصل إلى فئة الرطوبة المطلوبة. هذه المجموعة من المعدات محاطة بإطار شبه متحرك مشترك ومجهزة بسلالم وممرات لمراقبة الجودة والصيانة. تعمل وحدة هيدروسيكلون الغربالية على مبدأ دوري مغلق جزئيًا. أساسه عبارة عن خزان يستقبل الخليط الأولي من الرمل ، محتويات الطين والمياه ، حيث يتم الاحتفاظ بمستوى الطين ضمن نطاق معين. في الواقع ، هناك حاجة إلى الخزان لتوفير تركيز معين من الخليط يمكن لمضخة الطرد المركزي رفعه في الهيدروسيكلون. في الهيدروسيكلون (أو في الحلزونات المزدوجة) ، بسبب قوى الطرد المركزي ، يتم تصنيف ما يقرب من 100٪ من الجسيمات الأكبر من 100 ميكرون و 50-80٪ من الجسيمات الأكبر من 40-80 ميكرون ، والتي تكون في شكل خليط عالي التركيز يتم تصريفها من الإعصار إلى شاشة الجفاف (الجفاف) الموجودة تحت الهيدروسيكلون. يتم نقل الجسيمات الأصغر (التي يجب أن تحتوي على جميع جزيئات الطين وغيرها من الشوائب) بعيدًا مع الحجم الرئيسي للمياه من الهيدروسيكلون إلى نظام يقسم التدفق (التنظيم التلقائي بواسطة صمام) إلى الرجوع إلى الخزان والصرف ، والذي يتم إرسالها إلى نظام تنقية المياه. تم تجهيز شاشة نزح المياه بشاشات من البولي يوريثين أو المطاط ذات فتحات (عادة 0.3-1.5 مم) ، والتي من خلالها يتم تصريف المياه بكفاءة في الخزان ، وتنزلق جزيئات الرمل إلى أنبوب التفريغ ويتم تفريغها على ناقل المنتج. سينخفض محتوى جزيئات الغبار في الرمل إلى 0.02-0.9٪. نوصي بشدة أنه قبل اختيار معدات الفرز أو التصنيف المخططة لحل مشكلتك ، من الضروري إجراء البحث اللازم للمواد الخام في مختبرنا.
Wipe Kimya
Yalova, تركيا
USD
6606.74/шт
6606.74
تعتبر Dynamic forms Service Equipment ، التي فسرت أنظمة الطلاء الصناعية من منظور مختلف منذ إنشائها ، شريكك الرائد في الحلول في تركيا من خلال أكشاك الطلاء الخاصة بها. معدات خدمة Dynamic forms ، التي كانت تقدم منتجات حديثة وقابلة للاستخدام لمدة 20 عامًا دون أن تفقد هوية البحث والتطوير الخاصة بها ، تضع منتجاتها ليس فقط كمنتج ولكن أيضًا كحل يلبي احتياجات البيئة التي تريدها يكون موجودا. المكاتب: ألمانيا ، فرنسا ، أفريقيا ، تركيا ، بلغاريا
حدد السعر
USD
0
0
تصميم اللوحة الإلكترونية الصناعية PCB ، الإنتاج الضخم ، البرامج المضمنة ، برنامج PLC ، إنتاج لوحة التحكم ، أتمتة الآلات الصناعية ، مسجل البيانات ، تصميم الدوائر الإلكترونية ، تصميم اللوحة الإلكترونية ، تصميم الدوائر باستخدام ESP32 ، برنامج Arduino ، تصميم دوائر Arduino ، تطوير برامج Arduino ، إلخ .. أتمتة الماكينة ، الأتمتة الصناعية ، برمجة PLC ، مسجل البيانات ، أنظمة إنترنت الأشياء ، أنظمة التحكم ، لوحة التحكم ، إنتاج لوحة الأتمتة ، برامج الواجهة.
فئة الموردين
جميع الموردين في الفئة
المنتج:
المورد:
أوامر الحد الأدنى:
المديرية
قسم المبيعات:
قسم المبيعات:
قسم المبيعات:
المعلومات
أبلغ مدير أنك وجدت المنتج على Qoovee
جهات اتصال الموارد غير متاحة!
اكتب رسالة إلى المورد