Компания «ДиПиПром», г.Александров

Specifications: Productivity, kg / h 1000 Water consumption, m3 / h 2.65 Inner diameter of the working drum, mm 450 Installed power, kW 0.75 Occupied area, m2 1.67 Weight, kg 270 Overall dimensions, mm 2380х700x1390

Additional information: combined burner Lamborghini TWIN 13E TWIN - dual fuel burners (diesel and gas) .TWIN 13-E single-stage dual fuel burners. TWIN 50/2 and 70/2 two-stage dual fuel burners. Burners type TWIN 50/2 and 70/2 are equipped with two nozzles, which ensures ignition with reduced fuel consumption, as well as operation at minimum and maximum power. Burners of the above types operate in both two-stage mode (/ 2) and and in flame modulation mode (/ M) Application: Installation on heat generators (hot water boilers, heat generators, heat guns, steam generators, steam boilers, etc.) in order to obtain heat when burning diesel fuel, natural or liquefied gas in conditions as close as possible to ideal combustion. Main characteristics: Various modifications of this model are suitable for installation on boilers with a wide range of capacities (from 100 to 1900 kW) Possibility of alternative for efficient operation with one of two types of fuel: gas or diesel fuel Low CO and NOx emissions Modulating burners are equipped with fuel preheating, temperature controlled (thermostat) Burners are equipped with a gas train, stabilizer, double valve and filter Adjustable combustion process Stabilized ventilation Optimal combustion process due to uniform air distribution Electric servo controller on air damper (two-stage model) Low emission (low CO and NOx emissions) Sound-absorbing cover (Models TWIN 13-E; TWIN 50/2-E; TWIN 70/2-E) Compact dimensions (Models TWIN 13-E; TWIN 50/2-E; TWIN 70/2-E) Description: Possibility work on two types of fuel: natural gas or diesel fuel. To switch from one type of fuel to another, it is necessary to readjust the burner. One-stage combustion - the ability to work in two modes: the burner is off - the burner is on and operates at the set power. Two-stage combustion - the ability to work in three modes: the burner is off - first stage of operation (reduced power) - second stage of burner operation (installed power). High-pressure damper with electric servo drive for two-stage models. Manual adjustment of the degree of opening of the air damper for TWIN 13. The presence of a damper with an automatic shutter reduces heat loss when the burner is off. Air supply fan. Self-priming fuel pump. The shape of the combustion head ensures high performance combustion and low CO and NOx emissions. Gas train with stabilizer, double gas valve and filter. Two oil injectors. High degree of safety due to the complete set of electronic control and monitoring devices. Gas density control fittings for TWIN 120/2-E and TWIN 180/2-E. Soundproof design and compact dimensions for TWIN 13, TWIN 50/2-E, TWIN 70/2-E. All burner assemblies and parts can be easily inspected without disconnecting from the fuel supply lines. Adjustable nozzle length for TWIN 13, TWIN 50/2-E, TWIN 70/2-E, which makes it easy to adjust the burner for optimal operation. Installation on the boiler with a special flange with universal distance which allows TWIN burners to be mounted on boilers of different manufacturers. The flange is independent of the boiler body, which ensures quick service. For the convenience of using the burner, all main electrical components are connected to the quick-disconnect plug, which eliminates the possibility of connection errors. < br> The combustion head can be adjusted even when the boiler is running. The burners are equipped with an ignition electrode and a photoresistor to control the presence of a flame. Automatic functions: Stepped power control (except for TWIN burner 13). Flame control. Fan control. Fuel pump control. Air damper control (except for TWIN 13 burner). Cleaning the combustion chamber from combustion products before and after working loop.

Technical characteristics - Productivity, cage / h - Cattle 30 - Pigs 80 - Small ruminant 60 Roller rotation speed, rpm: upper toothed polyurethane diameter 100 mm 46.24 bottom smooth polyurethane diameter 100 mm 46.24 Water consumption, m³ / h 1.8 Water pressure in the water supply, MPa 4.0 Electric motor: type AIR 71 A4U3 380 V power, kW 0.25 rotation frequency, rpm. 1350 Reducer: type MRT 40 A reduction ratio, i 25 Overall dimensions, mm: length 740 • width 490 • height 1040 Weight, kg 50

Specifications: Maximum carrying capacity, kg. 250 Installed power, kW 1,5 Occupied area (with a cabinet), m2 1,5 Overall dimensions of the platform, mm 1500х1000х3260 Travel speed, m / s (m / min) 0, 2 (12) Overall dimensions of the platform, mm 800x1000 Weight of the platform with the cabinet, kg 400 Lift height, m 1.8

The lifting and lowering platform can be completed with auxiliary equipment for individual operations for meat processing: - balancer for the saw R3-FRP2; - hanging track with an arm (designed for transportation of carcasses on a suspension in the slaughterhouse. It is a 65x12 strip fixed with an h = 250 bracket to the sub-ceiling bearing beams). Lift height (m): 2 Maximum lifting capacity (kg): 150 Installed power (kW): 1.1 Travel speed (m / s): 0.1 Occupied area (m2): 1 Overall dimensions of the platform: length / width / height (mm): 900х900х3700 Overall dimensions of the working platform (mm): 640х900 Service personnel (persons): 1 Weight of the platform with cabinet (kg): 377

Technical characteristics - Productivity, heads / hour 100 - Number of knife swings per minute 15 - Knife lifting height, mm 350 - Cutting force, kg. 1100 Worm gear motor: Type МЧ-160-63-15-52-1 Power, kW 3,0 Gear ratio, I 63 Speed of low-speed shaft, rev ./min. 15 Overall dimensions, mm: length 1500 width 600 height 1185 Weight, kg 380

Technical characteristics - Productivity, body /: Cattle 30 - Pigs 80 - Small cattle 60 - Rotational speed of rollers of the first group, rpm: Polyurethane with large corrugations ø 100mm 176.3 Upper toothed aluminum (Z = 30, m = 3.5) 76.3 Bottom with inclined ribs (18 ribs) from aluminum 435.6 Polyurethane smooth ø100mm 47, 7 Water consumption, m³ / h 3.0 Pressure in the water supply, MPa 4.0 Electric motor: type AIR 71V4 U3 380 V power, kW 0.5 rotation frequency, rpm. 1350 Reducer: type MRT 50 A gear ratio, i 15 Overall dimensions, mm: length 800 width 480 height 1090 Weight, kg 50

Technical characteristics: Skinning speed, m / min 3-6 Installed power, kW 2.2 Overall dimensions, mm 2860х1700х4300 Weight, kg 700

Chain elevator for planting pork carcasses, half-carcasses and quarters of cattle and pigs on a hanging track from a strip of 65 * 12 mm. Features: Lifting height (mm): 130/2150/2700 Chain speed (m / s): 0.24 Concentrated / distributed lifting capacity (kg): 250/500 Lifting angle (deg): 35/40/40 Technical performance when lifting trolleys with a load of 250 kg (no more than) (t / h): 90/60/45 Chain tension stroke (mm): 200 Overall dimensions h = 2150: length / width / height (mm): 4250х800х2750 Weight (kg): 500

FOK-U installation is an original solution for intestinal cleaning, which has a small size and is economical to operate. Reliability is guaranteed by the quality of factory assembly and the use of quality materials and elements, including food grade stainless steel. Simple and safe to operate. The casings entering the cleaning must be pre-squeezed and separated from the fat. The cleaning process is divided into two parts. The first part is crushing, which is carried out on the first three shafts (rubberized, lamellar and metal corrugated). After that, the casings will fall into the pallet, with a hole for manual placement between the shafts for the second part of the cleaning process. The second part of the cleaning process takes place on the remaining four shafts, where slinging and final cleaning are carried out. After processing on this machine, the casings are poured and calibrated. Specifications: Productivity, qw / hour KRS 30 pork 60 МРС 80 Installed capacity, kW 1.5 Hot water consumption, 35-40 С, m3 / h 2 < p> Overall dimensions, mm 1050 * 585 * 1360 Occupied area, m 0.6 Weight, kg 240

Technical characteristics: - loading volume: 10-15 pork stomachs - engine power: 2.2 kW - entirely made of KO steel - smooth speed control - transformer wardrobe - dimensions: - diameter 85 cm - height 120 cm

Recommended for use in workshops with a slaughter of 40 heads / hour of cattle or 120 heads / hour of pigs. Loading of raw materials from above into a conical hopper, and unloading from the side by opening a gate. The cleaner is fixed to the floor with four screws. The inlet for the water supply is at a height of 1300 mm thread G ¾ - B. Technical characteristics (wool) Productivity, kg / h. 300-450 Duration of the processing cycle, min. 7-12 One-time loading, kg. 45 Rotor speed, rpm. 112 Hot water consumption, m³ / h, no more than 0.6 Water temperature, degrees 60-70 Installed power, kW 5.5 Overall dimensions, mm, no more: Length 1274 - Width 1020 - Height 1370 - Weight, kg. 265 Specifications (mucous membranes, circles and blues) Productivity, kg / h. 300-450 Duration of the processing cycle, min. 7-12 One-time loading, kg. 50-80 Rotor speed, rpm. 140 Hot water consumption, m3 / h, not more than 0.6 Water temperature, degrees 65-68 Installed power, kW 5.5 Overall dimensions, mm, not more: Length 1274 - Width 1020 - Height 1370 - Weight, kg. 282