Saw R3-FRP-2 for sawing cattle carcasses - a stepping saw is designed for longitudinal sawing of carcasses of livestock (cattle, pigs, horses, mrs, etc.). The saw design was developed in the USSR, it was produced under various brands FRP, PEL, FVT, etc. and was used in many enterprises of the meat processing industry. The drive with a crank mechanism with a vibration damper provides a reciprocating motion of the cutting blade. Depending on the used production technology, the saw can be attached through a balancer (counterweight) to the supporting structures of the overhead track or to the lifting and lowering platform. The advantages of this model include reliability in operation, low initial and maintenance costs, simplicity of design and installation, availability of spare parts and consumables. Suitable for slaughterhouses of small and medium productivity, sanitary abattoirs, slaughterhouses and primary processing of livestock. As a rule, it is used in tandem with the B2-FEG saw for cutting the sternum. Due to its low cost, it can be used as a spare saw at high-performance enterprises in case of failure or maintenance of the main saw. Specifications: 1. Productivity, carcasses / h 1.1. - when sawing cattle carcasses 130 1.2. - when cutting pig carcasses 150 2. The number of double strokes of the saw blade, rpm 1410/360 3. Blade stroke length, mm 85 4. Cloth thickness, mm 1.8 5. Electric motor: 5.1. - asynchronous type 5.2. - power, kW 2.4 5.3. - frequency of rotation of the electric motor, rpm 1410/1360 5.4. - voltage, V, no more than 380/42 5.5. - current frequency, Hz 50 6. Overall dimensions, mm 1330х300х300 7. Weight, kg 63 Technical data of the blade for Р3-FRP-2: dimensions, mm: 610х50х2.5 cutting step length, mm-85 < / p> hole diameter, mm-8; distance between holes, mm-25 tooth pitch-10; height-7; angle-45 ° Supplied complete with a safety shut-off device, and also, at the request of the customer, can be completed with any number of spare FRP saw blades, balancer and lifting-lowering platform