Компания «Воля», г.Дубна

The corner profile allows you to fix and hold the polycarbonate panels at right angles to each other. Mating any rigid sheet materials at right angles allows it to be used in the production of exhibition, demonstration and advertising structures. The ends of the panels are inserted into the grooves of the profile so that a thermal gap of 3-5 mm remains in them (depending on the width panels). The corner profile is made of polycarbonate, it has the advantages inherent in polycarbonate products, such as: lightness and moisture resistance, excellent optical transparency, resistance to extreme impacts and frost resistance.

Ridge polycarbonate profile, as its name implies, is designed to mate and protect honeycomb polycarbonate panels in the ridge of translucent roof structures at an angle from 90 to 150. It is easy to install and harmoniously completes the structure, leaving at the same time, cellular polycarbonate panels are able to “feel free” - that is, expand / contract when changing temperatures. The profile fits snugly onto the upper end of the panel. In this case, it is necessary to leave a gap of 4-5 mm for the panel expansion.

The wall profile is created for the convenience of installation of translucent canopies and awnings when the sheets of cellular polycarbonate are adjacent to the wall. It serves as an end profile and ensures the tightness of the junction of the coating to the existing vertical structure.

The connecting split polycarbonate profile "PSR" is intended for the installation of structures made of cellular polycarbonate (translucent ceilings, vertical glazing, etc.). Provides fast and reliable fastening of panels to the frame with their simultaneous connection to each other. The profile consists of two parts: the bottom - "base" and the upper - a snap-on "cover". It is distinguished by its excellent appearance, reliability, high speed and ease of installation. "PSR 6-10 mm" is universal: it is suitable for fixing panels with a thickness of 6 mm, 8 mm and 10 mm. Fastening is carried out as follows: the "base" of the profile is attached to the main longitudinal supports of the frame, then the panels are installed , The “cover” of the profile is fixed in the desired position (lower position - 6 mm, upper - 8-10 mm) and “snaps in”. Fix the “cover” by sequential pressing of the palm on its front side. Avoid shocks when connecting the “cover” of the profile and the “base”. It is not recommended to use hammers, mallets and other tools when connecting the “lid” and “base”. Drill holes in the “base” (bottom part of the profile) with a step of 300 mm, the diameter of which should be slightly larger than the diameter of the self-tapping screw (or the legs of the thermal washer). Use self-tapping screws to attach the "base" of the profile to the frame. Lay the panels on both sides of the “base” so that they rest on the “base” and leave the necessary clearance for thermal expansion of the panels (3-5 mm depending on the width of the panel). Install the profile “cover” and, using a wooden mallet, “snap” it along the entire length of the profile, connecting it to the base. In the polycarbonate profile "PSR 6-10 mm" the presence of clamps on two levels allows at the lower position to connect panels with a thickness of 6 mm, and at the upper position - 8 and 10 mm. The profiles "PSR" provide a strong and tight connection of panels and fixing them to the supporting supports of the frame, at the same time, allowing them to expand (contract) under the influence of seasonal changes in ambient temperature. This is the most popular solution. These profiles are used in any construction, but are almost indispensable in arched canopies and ceilings.

We are used to the fact that manual watering is a tedious task that takes a lot of time and effort. Watering a greenhouse or open beds takes time, which is already not enough for everything. Watering with a hose, you have to methodically bypass all your landings, and the same work from a watering can takes a huge amount of energy. Accurate and careful irrigation of the greenhouse with a certain frequency with the manual method is extremely difficult, due to the large amount of time required for its implementation. The "Vodomerka" drip irrigation system will water all the plants on the site without your participation at the right time ! It frees you from caring for the plants by watering yourself and gently. Finally, you can do other, more important things that will always be found, and the drip irrigation "Vodomerka" will take care of the plants. Having tested our automatic drip system in practice, you will hardly want to use hoses and watering cans for watering greenhouses and spend a lot of time and effort on it. The uniqueness of Vodomerka drip irrigation is the presence of an automatic controller in system, with which you can select the interval and duration of the water supply. There is no need to keep information about the modes and amount of irrigation for different plants in your head, it is enough to set the parameters of the controllers of your "Water striders" once and the drip system on the open ground or in the greenhouse will start irrigation with the required amount of water at the right time.

Insert for "Water strider" irrigation system

Not all gardeners have the opportunity to install a permanent water supply at their summer cottage. But in a day you need to have time to water all the plants on the site. Trees, flowers in the flowerbed, greenery in the garden, vegetables and fruits in the greenhouse - everything requires different watering. The Ruslo water supply system from the Volya company will unite all watering on the site! The "channel" consists of a 50 meter long hose, which is attached to a barrel or to a central water supply. Each site is unique, so the kit includes the necessary adapters and plugs with which you can route the hose throughout the site. Clamps and pegs will help secure the hose to the ground. Eight outlets allow you to connect a drip or slot irrigation system, a perforated and microporous hose, and bring water to a pool, shower or lawn sprinkler. At any time, you can turn off the water in the entire water supply system or in a separate area. The kit includes a filter that allows you to purify the water. Optionally, you can purchase one or more controllers. If a controller is installed between all irrigation systems and the water supply, then the entire system will turn on at a given frequency and frequency. If you connect the controller to only one system, all hoses will work when the water is turned on, the hose with the controller will work according to the set schedule.

The company "Volia" offers you a convenient-to-use microporous hose "Mokryona". It can be easily connected to a water supply or pumping station. Three disc pads (included) control the flow of water into the oozing hose to ensure even watering along the entire length without splashing from the outlets. This irrigation system will cut water consumption in half! Run a hose in the greenhouse or between the beds and bushes. Turn on the water and in a few minutes the hose will fill with water. Then the water droplets will evenly fall through the pores directly into the soil along the entire length of the hose. The water flows directly to the plant roots. After watering is complete, open the plug and drain the water. Watering can be automated using an electronic controller (not included). The hose is 15 meters long.

At any summer cottage there are always agricultural crops that need frequent and abundant watering. Bypassing all the plants with heavy buckets is a tedious task. Leaving the hose with the water turned on all day unattended is dangerous, because the water jet can flood the plants and erode the beds and lawns. Continuous and comfortable watering of the plants on the site can be ensured with the help of a perforated "Sprinkler" hose from the company "Will"! One end of the hose is connected to a water supply or pumping station. At the other end there is a plug, removing which you can quickly drain the water from the hose. The length of the hose is 15 meters. You can place it in the area between the beds and on the lawns. The holes in the hose are located on both sides, so some of the water will be directed to the roots, and the other will be sprayed on top of the plant. The holes are evenly spaced for even watering along the entire length. You can connect a controller to the perforated hose.