المعدات والآلات الأخرى بالجملة على Qoovee
- معدات للأغراض العامة
- الأختام المضادة للمغناطيسية لأجهزة القياس
- معدات المصاعد
- معدات للمنتجات المطبوعة
- الأتمتة والبرمجيات
- الطاقة والمعدات الكهربائية
- انفجار برهان المعدات
- معدات الترشيح
- معدات تجهيز الزجاج
- معدات النجارة
- خزانات الماء والتوسع
- سخانات المياه غير المباشرة
- قطع غيار للمعدات الصناعية
- الأجهزة الصناعية
- معدات اللوحة الصناعية
- آلات القهوة
- معدات معالجة البلاستيك
- الأجزاء الميكانيكية
- معدات لإنتاج الأثاث
- المعدات اللازمة لصناعة الاطارات
- المعدات اللحام والتكنولوجيا
- معدات التجفيف
- معدات فراغ
- مراجل تسخين المياه
- آلة أداة المعدات وقطع الغيار
- خزانات التخزين
- تجهيزات المقاهي والمطاعم
- المراجل البخارية
- Steam generators
- غلايات زيت حرارية
- المقتصدون
صنف حسب:
USD
16348.31/шт
Мельницы среднего и тонкого помола, воздушные классификаторы применяются для измельчения горных пород либо растительного сырья, для разделения сыпучих веществ по величине частиц.
USD
3160.67/шт
Дезинтеграторы грубого и среднего помола предназначены для получения порошка с частицами 0-0.2 мм. В зависимости от модели используется с сухими и мокрыми веществами. Завод «ТЕХПРИБОР» изготавливает 5 моделей данного оборудования с производительностью до 5 кубометров в час.
USD
1310.04/шт
Конвейеры, питатели и шнеки – механизмы для транспортировки материала. Производительность 0.01 – 78 кубометров в час. Завод «ТЕХПРИБОР» предлагает: Конвейеры винтовые, стальные, вертикальные, спиральные и другие Шнеки гибкие, шнековые питатели регулируемой подачи Шлюзовые затворы, рецептурные микродозаторы и прочее оборудование.
USD
3536.69/шт
Строительная барабанная пескосеялка предназначена для избавления строительных смесей от крупных примесей и разбивания на более мелкие фракции. Производительность аппарата: 60–75 куб.м/ч. Масса: 950 кг.Габариты: 313 х 145,5 х 181 см.
USD
1520.39/шт
Машина кондитерская тестоотсадочная Славянка-3 предназначена для отсаживания изделий из песочного, заварного, творожного и бисквитного теста. Славянка-3 позволяет выпускать широкий ассортимент печенья благодаря использованию различного вида насадок и фигурных фильер. Сырье загружается в бункер загрузки и попадает в рабочую камеру, где при помощи поршня масса выталкивается через шланги в матрицы (форсунки) и отсаживается на противень. При этом поршень с цилиндром совершает колебательные движения "вверх-вниз", что отличает эту модель от предыдущих тестоотсадочных машин серии МКТ (МКТ-120). Эта особенность машины исключает нагрузки на шланги (они остаются неподвижными), что повышает надежность и ресурс работы машины.
USD
2343.26/шт
Confectionery dough-settling machine Prima-6 is designed for settling products from shortcrust, custard, curd dough. Works in automatic mode, the number of nozzles is from 6 to 8 pieces.
The dough depositor machine allows you to produce a wide range of biscuits due to the use of various types of attachments and shaped dies.
The jigging machine consists of a loading hopper, a lifting mechanism, a feed table and an electric drive. The hopper is used to load the machine with raw materials (dough, all kinds of fillings) and is a chamber inside which the piston moves. A row of nozzles is located at the bottom of the loading hopper. The piston moves vertically downward translationally and injects the raw material. The molded product comes out through the nozzles onto the feeding table on the baking sheet. The baking sheet is pushed towards itself by hand. The jigging machine is driven by an electric motor.
The model provides for adjustment of the weight and height of the product.
USD
6397.64/шт
Линия гранулирования древесных отходов предназначена для производства топливных гранул (пеллет). Исходное сырье: отходы древесины, щепа, горбыль, баланс Получаемый продукт: пеллеты диаметром 6-8 мм, длиной 10-25 мм Линия гранулирования древесных отходов содержит все необходимые для процесса участки, обеспечивающие: Сушку сырья Измельчение Увлажнение Прессование Охлаждение и просеивание Дозирование и фасовку
USD
2724.72/шт
TShPm furnaces with heat output of 0.8, 1.5, 2.0, 2.5 MW, manufactured by OOO PK Altayenergomash, are used for burning bituminous and brown coals. They are completed with steam boilers with a capacity of 1 to 3 t / h and hot water boilers with a heating capacity of 0.63 MW Installed in boiler houses equipped with a fuel supply system to the bunker and an ash removal system.
USD
136891.23/шт
Участок оцинкования предназначен для нагрева цинка и поддержания рабочей температуры расплава. В участке предусмотрена установка сгорания импульсного типа, с теплоизоляционным покрытием и автономной системой переносимости гидростатических ударов. Материал футеровки в МЦ-1 — жаростойкий Skamol super. Участок цинкования включает в себя модуль сушки, модуль цинкования и модуль промывки/закалки. Компания "БПМ-Технолоджис" разработала типовые варианты линий горячего цинкования. Участки оцинкования, предназначенные для встраивания в определенную Линию, отличаются габаритами обрабатываемых изделий. В зависимости от данного параметра стоимость Участка цинкования будет отличаться.
USD
2506.74/шт
The universal press of the new PN-2013 series is equally convenient for the manufacture of furniture facades, doors and door linings, as well as for specific tasks such as the production of triplex glass, molding products from ABS plastic, acrylic and artificial stone. There is a possibility of manufacturing radius facades. In the basic configuration, the press is equipped with an Italian oil rotary vane pump, a system for smooth triac starting of heaters, and disconnecting heaters in three zones.
USD
2506.74/шт
A unique press with a pneumatic drive for raising and lowering the working table. A discount is provided for the basic model with a desktop size of 1400x700 mm. The time of the action is limited. Only this press cuts the consumption of PVC film when laminating curved facades by half. In this case, the manufacturing process itself is simplified.
USD
31.88/шт
Стеллажи кухонные выпоннены полностью из пищевой нержавеющей стали. По желанию заказчика ножки могут быть выполнены из окрашенного металла, Размеры по желанию заказчика.Стелажи архивные (высота*длина* глубина) 2000*1000*600 на 6 полок.
USD
264.19/шт
Мармит - оборудование, предназначенное для сохранения и оперативной раздачи блюд в горячем виде. Мы выпускаем как мармит для первых или вторых блюд, так и универсальные паровые / комбинированные мармиты и модули для подачи горячих напитков или посуды. В зависимости от модели мармиты комплектуются конфорками с терморегуляторами, наборами гастроемкостей, полками с подсветкой, направляющими для подносов и т.д. Мармиты нашего производства выполнены из нержавеющей стали и имеют все необходимые документы.
USD
231.06/шт
Жарочные шкафы для столовых и кафе нашего производства выполнены с учетом всех требований и стандартов пищевого оборудования и отвечают самым жестким нормам качества. Варианты жарочных шкафов: - односекционные;- двухсекционные;- трехсекционные. Все модели независимо от кол-ва секций оснащены верхними и нижними ТЭНами с раздельной регулировкой температуры и защищающей от перегрева системой, а система отвода тепла предохраняет от перегрева наружние поверхности. Диапазон рабочих температур: от 20 до 270 градусов C.
USD
4250.56/шт
Котел варочный медный 28-2А (с мешалкой) предназначен для варки и уваривания сырья, употребляемого при производстве карамельной, ирисной, желейной масс, мармелада и различных начинок мягких конфет. Применяется в кондитерской промышленности, на специализированных предприятиях и в цехах кондитерских фабрик. Завод "Дагпродмаш" производит котлы варочные с цельно-кованной медной чашей, а также из нержавеющей стали. Котлы варочные применяются на кондитерских фабриках при производстве желе, мягких конфет. Предназначены для выпаривания сырья при нагревании в процессе изготовления желе, ириса, начинок для конфет. Котлы варочные, в зависимости от модели, снабжаются перемешивающим или опрокидывающим устройством.
USD
2070.79/шт
Котел опрокидывающийся МЗ-2С-244б (с мешалкой) оптом от производителя ОАО "Дагпродмаш". Приглашаем дилеров. Предназначен для варки и выпаривания овоще-фруктовых масс при производстве консервов, крупяных продуктов, концентратов, для уваривания сырья при температурном воздействии. Применяется в консервной промышленности. Завод "Дагпродмаш" производит котлы варочные с цельно-кованной медной чашей, а также из нержавеющей стали. Котлы варочные, в зависимости от модели, снабжаются перемешивающим или опрокидывающим устройством. Мы являемся производителями котлов варочных и вакуум-аппаратов, производственных линий для пищевой промышленности - кондитерской, консервной, сыроваренной. Наша продукция производится из нержавеющей стали. Некоторые виды варочных котлов (28-2А и Д9-41А) наделяются медной чашей, которые изготавливаются вручную.
USD
9591.01/шт
Testing machines (tensile) RMG-MG4 - for testing samples of metals, reinforcing steel, sheet and round rolled products in tension / compression / bending.
Modifications: for 500/300/200/100/50 kN. Normative documentation for testing: GOSTs 1497, 10922, 12004, 14019, 6996, etc.
Design options: RMG-500MG4 are made in the form of two parts - a loading unit and a control cabinet. The rest of the modifications are monoblock. Work - from the network 220V / 50Hz. RMG-200MG4, RMG-300MG4 and RMG-500MG4 are supplied with a control panel for gripper drives (included in the price).
The user enters the test data on the monitor panel in a dialogue mode, the data obtained during the test is stored in the machine's memory and can be transferred to a computer via a USB port.
USD
632.13/шт
Динамометры электронные ДМ-МГ4 аттестованы как эталоны 2-го разряда и используются для поверки прессов и испытательных машин в метрологических центрах. В научных и испытательных лабораториях, вузах их применяют в испытательных стендах – там, где требуется точное измерение силы. Приборы состоят из электронного блока и датчика, особенностью динамометров являются два режима электропитания: автономное (батарейки) и сеть 220 В. Электронный блок имеет большой дисплей с подсветкой, результаты отображаются на экране и заносятся в память прибора. Программа связи с компьютером передает данные в ПК по USB-порту. Не обязательно присылать прибор на модернизацию производителю – существует программа удаленного обновления сервисных функций.
USD
1634.83/шт
Pendulum tenoning machines DOS-ShR (50-500) for the production of box tenons.
Designed for cutting rectangular spikes in plywood, wood, chipboard, fiberboard, plastic, etc. in the manufacture of containers, hives, boxes, furniture, elements of corner joints of wooden structures, etc.
The thorns to be cut are rectangular.
The processing method is step by step.
The processing width in one stroke of the unit is from 50mm (DOS-ShR-50) to 500mm (DOS-ShR-500).
The greatest length of the workpiece - up to 3000mm
The maximum length of the workpiece is not limited.
Desktop / floor version, 220 / 380v
USD
3269.66/шт
Electric cargo lift. Warehouse, construction, sidewalk, restaurant, laundry, store, sidewalk, production, mine, instead of an elevator in the elevator shaft. We offer simple and inexpensive stationary lifts for shops, warehouses, manufacturing enterprises. Developed and manufactured individually. Possible lifting height up to 40 meters, lifting capacity up to 5 tons.
USD
7084.27/шт
Дезинфекционный барьер - техническая установка, предназначенная для дезинфекции автотранспорта и используется для бесконтактной обработки транспортных средств при въезде на территорию птицефабрик, животноводческих комплексов, молокозаводов, и других предприятий с повышенными требованиями к гигиене. Технические характеристики Назначение: дезинфекция и мойка транспортного средства Габариты рамки (д×в): 4420×5140 мм Количество форсунок: 15 Установка высокого давления : 380 В, 11.0 кВт Установка высокого давления : 380 В, 11.0 кВт Операция дезинфекции: 15 л/мин, 20 Бар Операция мойки: 30 л/мин, 180 Бар
USD
2724.72/шт
The VISUAL MASTER visualization and level control system is a combined and absolutely universal system for monitoring the filling level of containers with liquid and bulk materials. This system can be adapted to the needs of any enterprise.
The system is designed:
Continuous automatic measurement of the level and temperature of media in tanks;
Calculation (depending on the design options):
The volume of the product in each tank;
The total volume of the product in the tank farm;
Free volume in each tank and tank farm;
Product masses in each tank and tank farm;
Vapor phase masses in each tank and in the tank farm;
Rate of change of product level;
Forecast of the time of filling (emptying) the tank;
Alarm:
Minimum and maximum emergency level;
The maximum level of bottom water;
The level of separation (stratification) of environments;
The upper level of the measured medium;
Unauthorized changes to monitored levels;
Changes in the temperature of controlled environments (layer by layer or on average in height).
System applications:
Process equipment management;
Alarm;
Extraction of petroleum products;
Storage of petroleum products and liquefied gases;
Transportation of petroleum products and liquefied gases;
Refining of petroleum products;
Storage at oil depots and oil terminals.
Management of technological equipment for unloading and loading feed;
Alarm;
Storage.
USD
3115.96/шт
A vertical fire-tube water boiler is designed to heat water with a temperature of up to 115 ° C, due to a built-in superheater with an overpressure of 0.07 MPa (0.7 kg / cm2) in order to supply heat to technological processes in the following industries: - agricultural (forage production) - construction and assembly (asphalt concrete) - communal (heating, hot water using a boiler) - food (bakery, dairy, sausage, confectionery) - woodworking. The boilers are easy to maintain and do not require significant operating costs.
USD
7956.18/шт
Для данного комплекта оборудования необходимо помещение с размерами 11000х6000 мм.В комплект входит:- камера полимеризации с внутренними размерами (ДхШхВ) 3000х1600х1800 мм - 1 шт.;- камера напыления 2-постовая проходного типа с внутренними размерами (ДхШхВ 3000х900х1800 мм - 1 шт.;- кольцевая верхняя транспортная система - 1 компл.;- пистолет-распылитель - 2 шт;- устройство подготовки сжатого воздуха - 2 шт.Верхняя транспортная система, включает в себя:Транспортная эстакада – 2 шт.; Транспортная тележка – 2 шт.; Транспортная каретка – 10 шт.;Направляющие ручьи – 5 шт.;
USD
7302.25/шт
This set of equipment requires a room with dimensions 7500x8000 mm. The set includes: - polymerization chamber with internal dimensions (LxWxH) 3000x1600x1800 mm - 1 pc .; - 2-post spraying chamber through passage type with internal dimensions (LxWxH) 3000x900x1800 mm - 1 pc .; - semi-circular upper transport system - 1 set; - spray gun - 2 pcs; - compressed air preparation device - 2 pcs Upper transport system , includes: Transport overpass - 1 unit; Transport trolley - 2 pcs .; Transport carriage - 10 pcs .; Guiding streams - 5 pcs .;
USD
5340.45/шт
This set of equipment requires a room with dimensions 11000x6000 mm. The set includes: - polymerization chamber with internal dimensions (LxWxH) 3000x1600x1800 mm - 1 pc .; - universal spraying chamber with internal dimensions (LxWxH) 3000x800x1800 mm - 1 pc .; - lower transport system (loading trolley) - 1 set; - spray gun - 1 piece; - compressed air preparation device - 1 piece Lower transport system, includes: Racks - 2 pieces; Monorail - 1 piece; Swivel carriage - 1 pc .; Loading cart - 1 pc .; Transport route - 8 linear metro
Non-standard equipment
روسيا
حدد السعر
Экструзионная линия ЭЛ-15ПМпо выпуску полипропиленовой мононити (профильного ворса щеток ПУМ и метел)
Основным показателем экструзионного оборудования является его энергоэффективность, то есть, сколько энергозатрат приходится на единицу готовой продукции, от этого зависит рентабельность выпускаемой продукции.
Малогабаритная полуавтоматическая экструзионная линия ЭЛ-15ПМ, предназначена для производства мононити применяемой для изготовления метлы синтетической и ворса щеточных дисков подметальных машин.
Модульная конструкция экструзионной линии, позволяющая добавлять узлы для выпуска другой продукции. Оборудование стабильно работает на первичном и вторичном полипропилене различных марок. Длина всей линии 10 метров, общий вес 800 кг. Линия состоит из отдельных узлов и транспортируется в ГАЗели. При монтаже на месте потребуется установить агрегаты линии по уровню и подключить разъемы кабелей питания, последние установленные параметры сохраняются в памяти электроники! Малое количество тех.отхода при запуске линии и настройке рабочих параметров. Быстрая перестройка параметров на ворс другого профиля и сечения. Обслуживающий персонал 1 человек, оператор - упаковщица. Обучение, консультации, всесторонняя помощь - для наших клиентов бесплатны. Гарантия на оборудование 1 год, из практики - без поломок линия работает более 3х лет в круглосуточном режиме c остановками на профилактику.
Полная экструзионная линия ЭЛ-15ПМ включает в себя: экструдер, систему охлаждения, узел стабилизации, узел кручения мононити, узел протяжки совмещенный с узлом высокоскоростной резки, приемный бункер.
Non-standard equipment
روسيا
حدد السعر
Полуавтоматический комплекс СПМ-100 позволяет производить в среднем 100 круглых метел с колпаком в час. При этом задействован 1 человек в смену. Метла производится по запатентованной технологии, в которой колпак является несущим элементом, а не декоративным, как в обычной метле. Ворс монолитно спаян между собой и с колпаком, степень распушения метлы задается технологией и регулируется. Технология позволяет спаивать ПЭТ ворс, многократно превосходящий по своим характеристикам ворс из полипропилена. Оснастка может быть изготовлена под колпак любой формы. Настройка производится под различную длину ворса. Шуруп вкручивается в колпак за один цикл со спайкой метлы, автоматически.
Технические характеристики:Габаритные размеры, м.: 3,0х3,0х3,5 Потребляемая мощность, кВт.: 5 Напряжение эл.питания, В.: 380 Тип охлаждения: водяное Сырьё заливки: полипропилен марки 21030 (вторичный) Материал ворса: ПП, ПЭТФ.
LPGroup LTD
كازاخستان
USD
2247.19/шт
Avas has over 20 years of experience in the design and manufacture of equipment for gas stations and tank farms. Avas SRT series fuel dispensers have high quality at a low price, proven in many markets around the world. Reliable reading device with 20 years of experience and long life hydraulics. A set of solutions for expanding functions and upgrading on basic models. Possibility of completing with different performance (up to 120l / min). Specifications: Rated fuel consumption: 50, 80 l / min ± 10% < br> Lowest fuel consumption: no more than 5 l / min Minimum dispensing dose: no more than 2 l Pump motor power: 0.75 / 1.1 kW Supply voltage: 380/220 V > Operating temperature range: -40 ~ 50 ℃ Relative air humidity: 20 ~ 95% Relative error: no more than ± 0.25% Communication interface: RS-485 Explosion protection category: 2ExdmIIAT3 MTBF: 12000 h Average service life: 12 years Version: Hydraulic type: Pressure / suction Number of hoses: 2-8 Number of products: 1-4
LLC "Alterra", Balashikha
Балашиха, روسيا
USD
449.58/м2
The vacuum cleaner is developed on the basis of the Dustprom-PP-220/20.4 vacuum cleaner with global modernization and improvement of technical characteristics.
Features of the Dastprom PP-220/20. 6-1. 5 model:< / h2>
The vacuum cleaner has a smooth start of the turbines(increases the service life of the turbines);< / li>
Installed & nbsp; < a style= "box-sizing: border-box; margin: 0px; padding: 0px; background: 0px 0px; color: #1a70d5; text-decoration-line: none; "target=" _blank "rel=" noopener " >washable ultra-fine filter < /a>;< / li>
Equipped with turbine fuse;(avoids premature failure of the turbine due to power surges);< / li>
The engine compartment and the second cyclone are made of industrial plastic;
For the convenience of transportation, it is equipped with a removable magnetic platform with gray wheels that do not leave traces;< / li>
Equipped with 4 nozzles (+set of catchment rubber), a hose (3 meters), a rod and a set of filters;< / li>
Designed for cleaning not only mixed garbage, but also fine dust;< / li>
As in the vacuum cleaners PP-220/40, PP-220/60, PP-220/75, the garbage collection tank and the cyclone are placed in a single-volume form;< / li>
The vacuum cleaner has a tank with a capacity of 20 liters;< / li>
The device does not require readjustment to collect liquid, dry, sticky dirt in any combination. No float chambers, replacement bags, etc.;< / li>
The small size of the vacuum cleaner allows you to transport it in any passenger car.
Product specifications and configuration are subject to change by the manufacturer without notice.
< span style= " box-sizing: border-box; margin: 0px; padding: 0px; font-weight: bold; color: #383838;">Please note!
If you have large volumes of dirt, you should pay attention to the model with a large tank volume (from 40 to 75 liters);
If your garbage is very heavy, you should pay attention to models with a higher electrical power of 3.0 kW or more.< / li>
Standard package includes:
Vacuum cleaner;< / li>
Floor vacuum cleaner nozzle 360 mm;< / li>
Water collecting rubber for the nozzle 360 mm, set (2 pcs);< / li>
The nozzle for the vacuum cleaner is slotted with a pile;< / li>
Universal slot vacuum cleaner nozzle;< / li>
The nozzle for the vacuum cleaner is round with a pile;< / li>
Vacuum cleaner rod;
the Hose of a vacuum cleaner (standard version, 3 m);< / li>
Filter elements (washable HEPA ultra-fine filterandturbine cooling filter).
Features
Country of manufacture< / span>< / div>
Russia
LLC "Alterra", Balashikha
Балашиха, روسيا
USD
856.92 - 1019.04/шт
Industrial vacuum cleaner Dastprom PP-220 / 40.3-3-C2 (Dastprom PP-402 / 3000-2F) Electric power & ndash; 3.0 kW. Turbines 2x1.5 kW for industrial vacuum cleaners C2 & ndash; assembly of 2 car air filters: * Fine filter (large) & ndash; Air filtering element ZIL-133 GYa, 645 x; Fine filter (small) & ndash; Air filtering element DF 6600 & ndash; a universal vacuum cleaner designed for cleaning large areas from any kind of garbage, water, non-flammable liquids, oils, sticky fractions, metal shavings and scale, any non-explosive fine dust. The vacuum cleaner is equipped with 2 turbines of 1500 W each and a unique 2-stage vortex filtration system and an additional third stage & ndash; an air filter that completely collects dust with a particle size of more than 15 microns. Equipped with a turbine overheating protection system. The vacuum cleaner has 2 cyclone tanks with a volume of 40 liters, which allows you to collect a large amount of dirt. The vacuum cleaner is mounted on an agile and compact frame with 4 wheels - large and small. Small swivel wheels are equipped with stoppers. It can be additionally equipped with a hanging nozzle (brush) 60 cm long.Technical characteristics: Electric power: 3.0 kW Power supply voltage: 220 V Suction power: 1050 aerowatt Maximum discharge: 30 kPa Maximum air consumption of turbines: 385 m3 / hour Actual air consumption at the inlet to the vacuum cleaner: 360 m3 / hour Average time to failure of turbines (replacement of electric brushes): not less than 500 hours Noise level: not more than 65 dB Air purification efficiency of turbines: 99.9% Operating mode: continuous, round the clock Body: steel Coating: polymer, powder painting Length: 650 mm Width: 600 mm Height: 1380 mm Weight: 44.8 kg Diameter of the body (cyclone): 400 mm Volume of the waste collection tank: 40 l Inner diameter of the hose: 51 mm Link to the video about the device and characteristics of the industrial vacuum cleaner Dastprom PP-401 (402 / 3000-2F): Cleaning liquid contaminants with a vacuum cleaner Dastprom PP-401 (402 / 3000-2F):
DITOGROUP
روسيا
USD
10000.0 - 12000.0/шт
The machine is designed to mechanize the process of glazing confectionery products with chocolate glaze at food industry enterprises. The machine allows you to apply glaze of various coating thicknesses. The machine is equipped with a glaze bowl with a capacity of 50 kg with a stirrer for mixing the glaze (heating the bowl with Electro-heating elements), a glaze diffuser with adjustable glaze layer thickness. Glazing technology provides a uniform glaze layer, a glossy appearance, and long shelf life. Having our own service center and competent specialists will allow us to ensure reliable operation of your equipment during the warranty and post-warranty periods. Low prices, short delivery times. We are manufacturers of this equipment and are ready to offer VERY ATTRACTIVE PRICES !!! To fix the price, ask for a commercial offer.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
37000.0 - 44000.0/шт
GCC launches solid state fiber laser engraving machines with flatbed laser engraving machines. The engraving machine represents a fundamentally new type of engraving equipment, which is designed for marking metal products such as stainless steel, copper, aluminum, titanium, zinc, iron, and silver. The original idea led to the creation of a laser complex that surpasses traditional markers on scanning optics. The productivity of such lasers increases several times in the manufacture of large batches of products. New professional equipment is replacing solid-state lasers on scanners with a small working field. The S290 solid-state laser engraver is based on the well-known Spirit model, and combines the quality and reliability of mechanics and electronics, combined with the latest emitter based on a solid-state ytterbium fiber laser. Thanks to this emitter, laser machines allow you to make color engraving on stainless steel. A large working area makes it possible to install a batch of products, which allows you to significantly increase the productivity of the machine, by reducing the time that is spent on installing each product.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
35000.0/шт
Stellar Mark IF series is a new laser marker from GCC based on ultra-durable fiber laser emitter SPI Lasers (UK). Designed for surface marking, deep engraving and even cutting metals and alloys up to 0.5mm thick. Thanks to the fine adjustment of the power, it is possible to color-code stainless steel. The Stellar Mark IF-20 is a compact desktop laser system that provides reliable, trouble-free operation with virtually no maintenance. The undoubted advantage of this laser complex is the low power consumption of the installation. The new type of laser source will make it possible to do without water cooling, which will significantly save the enterprise. The complex is controlled from the graphic package G-Soft Library. Here you can not only send files for execution by setting laser marker parameters, it is also a full-fledged vector editor, similar to CorelDraw. You can work with lines, regular and graphic text, objects, fill and so on. You can scale objects, move them, copy and combine. Additional programs are built in here, such as sequential numbering, barcode and barcode. In a word, there is everything you need here, whether it is an advertising and production or a souvenir workshop, or it will be an industrial enterprise with its own range of specific tasks. A wide range of metals and alloys can be processed, including steel, titanium, silver, gold, brass, copper, aluminum, painted metals, anodized aluminum, Alumamark, plastics, rubber, semiconductors, silicon wafers, some types of precious and ornamental stones, security films for Tesa and 3M lasers. The laser marker can successfully work in such areas as: Jewelry Engraving of advertising and souvenir products Engraving mobile phones and accessories Marking of tools, bearings, machine parts, mechanisms Automotive industry - security markings, dashboard decoration, marking of car parts Labeling of medical instruments and devices Labeling of microcircuits, processors, printed circuit boards, parts, manufacturing of warranty stickers
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
15500.0 - 21900.0/шт
Experience the power of the GCC LaserPro X Series, designed and engineered specifically for professional use. Thanks to quality equipment and high wear resistance, the GCC LaserPro X500III achieves high productivity. Model X500III combines the functions of both a laser cutter and an engraver. Professional cutting laser complex GCC with a working field of 1300 x 916 mm, made on the basis of the Gaia model, equipped with a glass laser emitter Reci 80, 100,130 or 150W, or 100W water-cooled GSI emitter. Inexpensive and reliable complex for laser cutting acrylic, plastic, plywood, wood, leather, paper and rubber.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
11500.0 - 13000.0/шт
The new cutting laser complex GCC with a working field of 635x458 mm, made on the basis of the Mercury model, is equipped with a Reci 80 and 100 W glass laser emitter with water cooling. Inexpensive and reliable complex for laser cutting of acrylic, plastic, wood, leather, paper and rubber. X252 is a medium format laser cutter suitable for processing both small and medium format products, while simultaneously achieving high productivity ... Ideal for simple laser cutting tasks. It should be noted that power, size of the working area and speed only affect productivity, while the cut quality remains consistently high.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
16300.0 - 35800.0/шт
A new generation of Spirit laser engraver, which has become the best-selling machine in Russia and in the world. Spirit LS not only retained all the best technical solutions that were used on the previous model, but also received the latest mechanical system and safety key. This model is the embodiment of quality, reliability and technical progress. The latest generation Spirit LS laser system continues the most successful Spirit series of laser engravers. The machine has a number of unique technical solutions, patented technologies and differs from all existing laser engravers. High-precision linear guides with a closed plain bearing allow engraving at speeds up to 2 m / s, while the engraving quality is even higher than on machines with a classical mechanical system, in which a carriage with rollers moves along a rail. The system is protected from dust and combustion products entering it, which significantly extends its service life. The security key will prevent you from using the machine without your knowledge. The working area of 740x460 mm makes this machine ideal for cutting and engraving. Spirit LS is the epitome of quality, reliability and the best interface available today. It's safe to say - Spirit LS sets new quality standards in modern laser engraving.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
13700.0 - 26000.0/шт
Самая продаваемая, на сегодняшний день, лазерная машина в России. Модель является оптимальной, и наиболее эффективной для резки и гравировки различных материалов. Улучшенный эргономичный дизайн, удобство в эксплуатации и техническом обслуживании машины, надежность и высокая производительность – все эти качества делают Spirit лидером продаж на Российском рынке лазерных граверов.Лазерная гравировальная машина Spirit является самой успешной разработкой компании GCC за последнее десятилетие. Машина за 2 года стала самой продаваемой в мире в своем классе. Революционные решения в дизайне сделали этот станок не только эстетически красивым, но и функционально удобным. Станок также имеет целый ряд инновационных технологических решений, которые позволяют сделать работу более простой, удобной и производительной. Такие решения, как съемный датчик автофокусировки, который способен предотвратить ошибку оператора, откидывающаяся верхняя крышка, позволяющая провести техническое обслуживание быстро и удобно за счет доступа ко всем механическим и оптическим элементам на рабочем столе, возможность перемещения каретки руками, отсек под рабочим столом, в который можно поместить компрессор, подсветка рабочего поля светодиодными линейками и многое другое. Все эти технологии не применялись ранее на других лазерных граверах и запатентованы компанией GCC. За счет оптимального рабочего поля 740x460 мм лазерный гравер Spirit является универсальным как для резки, так и для гравировки.
СП-ЛАЗЕР, КОМПАНИЯ
روسيا
USD
11900.0 - 22200.0/шт
The Mercury series of laser engravers has been sold on the market for over 10 years and is the most common laser machine in Russia. The Mercury III is an updated version of this series. The machine implements new topical solutions related to safety and access to equipment. The security key will protect the engraver from unwanted use and thus prevent unauthorized access to the machine. The emergency button will help the operator of the laser machine to interrupt the operation of the machine in an emergency. Mercury III is an easy-to-use multifunctional laser system that successfully operates in many advertising, souvenir and printing companies in our country, in industries that produce seals and stamps. A versatile working field (640x460 mm), a reliable laser emitter, and optimal cutting and engraving characteristics position the Mercury III as an ideal tool for a wide range of tasks.
يساعدك موقع Qoovee الرسمي على إبرام صفقات مربحة ، والعثور على مورد ومصنع لتنمية عملك. في قسم "قاعدة الموردين" يمكنك أن تجد كل ما تحتاجه لنفسك: المعدات والآلات الأخرى من روسيا وقيرغيزستان وكازاخستان وتركيا وأوكرانيا ودول أخرى يتم تحديث فئات المنتجات باستمرار وتبقى ذات صلة. يهتم موردو الجملة بمشتريات الجملة والشراكات وهم على استعداد للتعاون المفيد