مخاليط البناء بالجملة على Qoovee

longer service life and functionality of the joint high load-bearing resistant to fungus and bacteria suitable for natural stone resistant to ultraviolet radiation and weathering One-component, solvent and silicone, odor-neutral, UV and weather-resistant, waterproof, up to 20% permanently flexible sealing compound based on MS polymer. Resistant to fungi and bacteria. Suitable indoors and outdoors for closing expansion joints, wall and floor niches in ceramic tiles, as well as joints between tiles and foreign materials such as bathtubs, door frames, etc .; it can also be used for natural stone. The special adhesive can be painted over and is suitable for adhesion. Consumption of 1 cartridge is sufficient for 10 m2 with a connection width of 5 mm

-smooth; smooth easy smoothing classified according to EN 15651 parts 1, 3 and 4 EC 1 Plus - very low emissions according to GEV Emicode XS 1 - best protection against microorganisms (fungi) One-component, solvent-free, resistant to UV, aging and weather resistant, water-resistant, color-stable, elastic sealant based on acidic cross-linking silicone with good chemical resistance. For indoor and outdoor use to close expansion joints, wall and floor joints in ceramic coverings, as well as to close joints between tiles and foreign materials. consumption of 1 cartridge is enough for about 10 running meters with a seam width of 5 mm. color 17 colors plus transparent, see Color Swatch Chart

flexible simple smoothing classified according to EN 15651 Parts 1, 3 and 4 EC1 Plus - very low emission according to GEV Emicode XS 1 - best protection against microorganisms (fungi) One component, solvent free, UV, aging and weatherproof, waterproof, colorfast, elastic, acid-crosslinking silicone based sealant with good chemical resistance. Suitable indoors and outdoors for closing expansion joints and wall and floor recesses in ceramic tiles, as well as for sealing joints between tiles and foreign materials. Consumption of 1 cartridge is sufficient for 10 sqm with 5 mm joint width Color 17 colors plus transparent, see color swatch table

Optimal processing properties! wide range of colors bacteriologically harmless very resilient food grade, waterproof, frost-resistant, solvent-free, bacteriostatic, temperature, aging and chemical resistant, 2-component epoxy grout. Grouting ceramic tiles, panels and mosaics in interior and exterior wall and floor coverings. Especially suitable for use with aggressive waters, vegetable or animal fats and chemicals, as well as in drinking water containers. FMY 90 epoxy grout is also suitable for adhesion and leveling. Consumption about 1 kg / m² depending on the connection format

- Optimal technological properties! wide range of colors bacteriologically harmless very resilient food grade, waterproof, frost-resistant, solvent-free, bacteriostatic, temperature, aging and chemical resistant, 2-component epoxy grout. Grouting ceramic tiles, panels and mosaics in interior and exterior wall and floor coverings. Especially suitable for use with aggressive waters, vegetable or animal fats and chemicals, as well as in drinking water containers. FMY 90 epoxy grout is also suitable for adhesion and leveling. Consumption about 1 kg / m² depending on the connection format

-thin surface especially for natural stone and porcelain stoneware The setting is practically independent of temperature you can walk in 2 hours for joints from 1 to 15 mm Powdery, food-safe, water and frost-resistant, colored, fine-grained, hydraulically settable solution with an ideal hygienic formula. The unique high-temperature recipe ensures quick and even tightening of tiles and joints. Inside and outside on wall and floor surfaces with joint widths from 1 to 15 mm. A high level of lateral fit is achieved through high quality plastic components. consumption 0.5 & ndash; 1.8 kg / m & sup2; color gray, manhattan, anthracite, basalt

wide range of applications frost resistant minimizes fading Powdery, food safe, water and antifreeze, hardened, hydraulically settable trough-based grout for grouting wide joints. Trass Grout FMT 15 provides additional safety against fading and discoloration. Internal and external use for grouting 4 - 15 mm joint width. For grouting natural stones, absorbent tiles and artificial stones. Consumption 0.6 - 2.0 kg / m², depending on tile format and joint width Color gray, medium brown, anthracite, beige, manhattan

- wide range of applications frost resistant minimizes fading Powdered, food safe, water and antifreeze, hardened, hydraulically settable trough-based grout for grouting wide joints. Trass Grout FMT 15 provides additional safety against fading and discoloration. Internal and external use for grouting 4 - 15 mm joint width. For grouting natural stones, absorbent tiles and artificial stones. Consumption 0.6 - 2.0 kg / m², depending on tile format and joint width Color gray, medium brown, anthracite, beige, manhattan

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator for Color gray, white, silver gray, Manhattan gray, cement gray, jasmine, bahama, silk gray, hazelnut, sand gray, camel , sanitary gray, walnut brown, bali, basalt, anthracite, black

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

combination bonding with various materials permanently elastic with extremely high adhesive strength very good adhesion without primer extremely high initial adhesion High quality elastic one-component adhesive based on the latest developments in MSP technology. The product is free from water, solvent, silicone, isocyanate and halogen, recoatable and UV and weather resistant. In addition, it is permanently elastic and prevents the transfer of unfavorable forces to the substrate. A universally applicable durable adhesive and sealant for indoor and outdoor use. Color white

seal + adhesion with one product very low emissions - EC1-PLUS waterproof and open to vapor diffusion decoupling for problem substrates New type of hydraulic installation, waterproof but still open to vapor diffusion, cementitious, flexible, one-component sealable and adhesive solution. Indoor and outdoor spaces for creating seamless and seamless seals in wall and floor coverings directly under ceramic tiles and boards (according to EN 14891 and ÖNORM B 3407 W1 - W6), as well as for bonding ceramic floor coverings for high thermal or mechanical stress. Consumption as a seal: about 1.5 kg / m² per mm as an adhesive: about 3 kg / m² depending on the tile format

high flexibility (S2) high stability with wall-mounted tension reduction even for problem substrates suitable for all tile types and sizes One-component, powdery, high-temperature, frost-free, hydraulically set, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine ceramics, natural stones that are not sensitive to moisture. Particularly suitable for the installation of highly demanding ceramic tiles. Consumption depending on the teeth: approx. 1.6 kg / m² with 6 mm teeth, approx. 2.2 kg / m² with 8 mm teeth, approx. 2.9 kg / m² with 10 mm notched teeth Color white

near temperature independent (from + 2 ° C) bonding of crystalline water fast hardening and high flexibility early adhesion strength White, almost temperature independent, powdery, crystalline water-binding, water- and frost-resistant, high-temperature, hydraulically set flexible adhesive solution for laying up to 20 mm thick adhesive layer. No show for lightweight materials. For laying ceramic wall and floor tiles indoors and outdoors, thin porcelain stoneware, for increased thermal or static loads in a layer up to an adhesive thickness of 4 to 20 mm. Consumption with teeth: approx. 1.8 kg / m² with teeth 6 mm, approx. 2.5 kg / m² with teeth 8 mm, approx. 3.2 kg / m² with teeth 10 mm Color white

near temperature independent (from +2 ° C) crystalline water bonding fast hardening and high flexibility minimizes efflorescence Near temperature independent, powdery, crystalline water-binding, water- and frost-resistant, highly hardened, fast, hydraulically settable gray grout adhesive in an adhesive layer up to 20 mm thick. The adhesive solution provides great protection against fading and discoloration. Indoor and outdoor for wall and floor installation. Consumption with teeth: approx. 1.8 kg / m² with teeth 6 mm, approx. 2.6 kg / m² with teeth 8 mm, approx. 3.4 kg / m² with teeth 10 mm Color gray

high stability extremely smooth processing no slippage Powdery, food-safe, hydraulically settable flexible adhesive with perfectly matched processing properties. Inside and outside for bonding all types of ceramic materials and opaque, moisture-resistant natural stones, as well as for leveling walls and floors. For all standard building substrates from 2 to 20 mm thick. The adhesive impresses with its smooth finish with extremely high stability and zero slip. Consumption depending on the teeth: approx. 1.6 kg / m² with 6 mm teeth, approx. 2.2 kg / m² with 8 mm teeth, approx. 2.9 kg / m² with 10 mm teeth Light gray

Roll-up and spreadable chemically resistant elastic thixotrope Flexible, solvent-free, permeable, thixotropic, permanently elastic, seamless and seamless two-piece polyurethane-based compound seals. For internal and external sealing on both horizontal and vertical surfaces. Can be applied under various ceramic coatings, in accordance with EN 14891, ÖNORM B 3407 W1-W6, in accordance with DIN 18534 for water exposure classes W0-I to W3-I, in accordance with DIN 18531-5 (balconies, loggias, etc.) and DIN 18535 (pools and containers), as well as in accordance with the test principles for the issuance of a general building inspection certificate. Can be used in swimming pools, large kitchens, industrial wet rooms, showers, bathrooms, etc. Consumption approx. 1.9 kg / m² per mm of layer thickness

2-component rapid hardening can be applied with a trowel tested in accordance with EN 14891 UV resistance Fast hardening, seam and no knock, two-component, low temperature resilient compound seal. Indoors and outdoors for non-shock sealing of walls and floors under ceramic tiles in showers, bathrooms, terraces and balconies. Consumption about 1.5 kg / m² for a layer thickness of mm (about 3 kg / m² for a layer thickness of 2 mm)

ready-to-use roller or trowel application tested in accordance with EN 14891 very low emission - EC1-PLUS Solvent free, waterproof, one component, permanently elastic, seamless and seamless composite seal. Indoor use only for bumpless sealing of wall and floor surfaces in damp areas (eg showers, bathrooms, steam baths, etc.). To protect against unpressurized water draining directly under the ceramic floor. In accordance with EN 14891, ÖNORM B 3407 W1-W4 and in accordance with DIN 18534 for water exposure class W0-I, W1-I, W2-I (wall) and in accordance with the test principles for issuing a general building inspection certificate ... Consumption about 1.5 kg / m² for a layer thickness of mm (about 0.8 kg / m² for a layer thickness of 0.5 mm) Color blue

indoor and outdoor ready-to-use early strength Prefabricated, universally usable dry mortar for screed production Can be processed manually or by machine. It can be used as floating, grease-free or as a compound screed and is suitable as a heated screed without additional additives. Screed with high early strength and extremely low moisture content, which is also suitable for damp rooms, but not for very high sustained water loads. Consumption about 20 kg / m² / cm

with trass content very fast hardening high stability up to 50 mm in one layer Trass-containing, highly hardened, water and frost resistant, very fast hardening, hydraulically setting leveling mortar. Thanks to special additives, the mortar hardens without tension up to 50 mm and demonstrates very good processing properties. Indoors and outdoors for leveling uneven walls and floor areas before tiling. Consumption about 1.6 kg / m² per layer thickness mm

odorless fast hardening solvent free no mixer required Universal, fast hardening, solvent free, odorless 2K silicate resin based on PUR water glass with very good adhesion and ultimate strength. Indoors and outdoors for positive locking of working and compression joints as well as narrow and wide screed cracks as a quick mortar and adhesive for wood, stone, concrete and metal. Consumption from 1.3 to 1.5 kg per liter of articular space, about 100 ml / running meter of a narrow screed crack, depending on the width and depth of the crack Color Comp.Yellow - Comp.B brown

- high moisture barrier Emicode EC1 Plus / extremely low emission solvent-free / Giscode RE1 odor reduction High quality, low emission, two-component epoxy resin system for blocking moisture on cement screed and concrete. To block excess residual moisture in the room up to 6 CM% in concrete substrates and cement screeds. Consultation is required for use with underfloor heating systems. Consumption depending on the field of application: 200 - 600 g / m²; as a moisture barrier: 450 g / m², as an EP mortar: approx. 0.3 kg / m² for each mm of layer thickness

- high moisture barrier Emicode EC1 Plus / extremely low emission solvent-free / Giscode RE1 odor reduction High quality, low emission, two-component epoxy resin system for blocking moisture on cement screed and concrete. To block excess residual moisture in the room up to 6 CM% in concrete substrates and cement screeds. Consultation is required for use with underfloor heating systems. Consumption depending on the field of application: 200 - 600 g / m²; as a moisture barrier: 450 g / m², as an EP mortar: approx. 0.3 kg / m² for each mm of layer thickness

- EC1 - very low emission blue, solvent free, ready to use High quality synthetic resin dispersion with very good penetration properties and easy handling due to its blue color. Indoors and outdoors as an adhesive bridge for all adhesives, leveling compounds and compound seals for absorbent substrates. Suitable according to ÖNORM B 3407 W1 - W2. Consumption about 150 g / m² Color blue

- EC1 - very low emission blue, solvent free, ready to use High quality synthetic resin dispersion with very good penetration properties and easy handling due to its blue color. Indoors and outdoors as an adhesive bridge for all adhesives, leveling compounds and compound seals for absorbent substrates. Suitable according to ÖNORM B 3407 W1 - W2. Consumption about 150 g / m² Color blue

is a versatile one-component EC1 very low emission fast drying primer filled with quartz sand tiles on tiles Adhesive, solvent-free, one-component, ready-to-use, very fast drying primer based on a special dispersion. A non-slip surface is achieved after drying. Indoor and outdoor for walls and flooring. For the preparation of absorbent and non-absorbent substrates. Suitable both before smoothing with Murexin leveling compounds and before laying tiles; specially for repairing tiles on tiles. Supergrund D4 Rapid can be used as a primer on anhydrite screeds up to 10,000 cm² (eg 100 x 100 cm) (More in the section “For a perfect system”). Suitable according to ÖNORM B 3407 W1 - W2. Consumption 100 - 150 g / m² depending on the substrate Color yellow

is a versatile one-component EC1 very low emission fast drying primer filled with quartz sand tiles on tiles Adhesive, solvent-free, one-component, ready-to-use, very fast drying primer based on a special dispersion. A non-slip surface is achieved after drying. Indoor and outdoor for walls and flooring. For the preparation of absorbent and non-absorbent substrates. Suitable both before smoothing with Murexin leveling compounds and before laying tiles; specially for repairing tiles on tiles. Supergrund D4 Rapid can be used as a primer on anhydrite screeds up to 10,000 cm² (eg 100 x 100 cm) (More in the section “For a perfect system”). Suitable according to ÖNORM B 3407 W1 - W2. Consumption 100 - 150 g / m² depending on the substrate Color yellow

- fiber reinforced improved full hardening very good deformability excellent stability Powdery but fiber reinforced and dustproof, water and frost resistant, highly hardened, hydraulically settable flexible adhesive with improved full hardening for installation in thin layers. For the installation of indoor and outdoor ceramic wall and floor tiles, panels, fine ceramics, natural stones for increased thermal or static loads. Particularly suitable for tiling on tiles. Consumption consumption depending on the teeth: approx. 1.7 kg / m² with 6 mm teeth, approx. 2.3 kg / m² with 8 mm teeth, approx. 3.0 kg / m² with 10 mm notched teeth Color gray

liquid roof and building sealant for indoor and outdoor use can be used vertically and horizontally ready to work can be applied to slightly damp substrates High quality, flexible, one-component, ready-to-use, water, solvent and silicone free, flexible and weather resistant for roofs and buildings, suitable for any indoor and outdoor sealing work and compatible with various types of surface materials such as natural stone carpets, ceramic coverings, mineral mortars, etc. Consumption Approx. 2.7 kg / m² for a 2 mm layer or in accordance with the requirements of the standard Color light gray / white

high adhesion one component absorption-regulating Adhesion-strengthening, physically drying primer for polyurethane sealing compounds. It regulates the absorbency of the backing and provides a better adhesive bond to the edges of the seams and the sealing compound of the seams. Indoors and outdoors as an adhesive undercoat for absorbent and non-absorbent substrates before sealing with polyurethane and silicon seals. Consumption of 1 liter is sufficient for approximately 150 running meters (highly dependent on substrate) Substrate

bonding medium for standard metal substrates dries and degreases metals leaves a pale pink film behind one-component, ready-to-use can also be used as a cleaner Metal Primer MP Plus 2 is a ready-to-use special cleaning and bonding medium based on solvents for standard metal substrates, and is also used as a cleaner for instruments. Consumption approx. 0.1 l / m² as a cleaner for the special seal WD-1K approx. 0.1 l / m² as a binder Color pale pink

chemical resistance permanently elastic good edge adhesion high resistance Highly elastic, odorless, permanently elastic, chemical resistant, one component, UV stable polyurethane based sealant with high edge adhesion. Indoors and outdoors as a universal sealant for expanding and joining joints in floors and walls. Especially for chemically stressed surfaces such as gas stations, commercial kitchens, swimming pools, industrial surfaces. Consumption about 1.2 kg per liter of articular space about 10 sq. m with a joint width of 5 mm

solvent-free fiber-reinforced fracture bridge Two-component, solvent-free, fiber-reinforced, fractured bridge, plastically hardened bitumen coating. Two-piece sealing products, tested in accordance with EN 15814, consist of a fluid and a power component. Indoors and outdoors for the manual production of permanent, flexible seals for earth-contacting structures for use in horizontal and vertical applications. For adhesion of perimeter insulation panels on bituminous and mineral substrates in contact with the ground. Consumption Soil moisture approx. 4.5 kg / m² Unstable water = approx. 5.4 Wet layer thickness = approx 3.1 mm Dry layer thickness of standing water approx. 6.0 kg / m² = approx. 6.0 mm Wet layer thickness = approx. 4, 4 mm Dry layer thickness

filled with solvent-free polystyrene low material weight Two-component, filled with polystyrene, solvent-free, highly flexible, crack-like, plastically hardened bitumen coating. Indoors and outdoors for the manual production of permanent, flexible seals for earth-contacting structures for use in horizontal and vertical applications. For adhesion of perimeter insulation panels on bituminous and mineral substrates in contact with the ground. Consumption Adhesion of insulating panels: approx. 2 kg / m² Soil moisture / standing water: approx. 4.5 l / m² = approx. 4.5 mm Wet layer thickness = approx. 3.2 mm Dry layer thickness still water seepage: approx. 6.0 l / m² = about 6.0 mm Wet layer thickness = about 4.3 mm Dry layer thickness

ready to work fast reaction sprayable High quality, one-component polystyrene-filled, fast reaction plastic-hardened bitumen coating. Indoors and outdoors for the manual production of permanent, flexible gaskets for earth-contacting, earth-contacting structures. Consumption Adhesion of insulating panels: approx. 2.0 l / m² Soil moisture / non-standing water seepage: 3.5 - 4.0 l / m² (DIN 18195-4) Water unblown (horizontal): 3.5 - 4.0 l / m2 (DIN 18195-5) Standing seepage water: 4.5 - 5.0 l / m2 (DIN 18195-6)

suitable for drinking water containers whitewashed and spreadable on slightly damp substrates open to vapor diffusion Sulphate-resistant, plastic-hardened, mineral dry sealable sludge, especially for drinking water in accordance with the applicable test principles. Indoor and outdoor for horizontal and vertical sealing against non-pressurized water such as foundations, base plates, basement walls, retaining walls, potable and industrial water, gallery and tunnel construction, cisterns and underground car parks. As a masonry barrier under rising masonry, both as a negative filling and for the formation of cavities. Consumption with a spatula consistency of 2 - 3 kg / m² with a spreading consistency of 1.5 - 1.8 kg / m²

Moisture barrier (type A) Groundwater barrier (type T) Structural sealing membrane SK 100 is a cold adhesion bitumen membrane sealant with an HDPE carrier film. The product is tested in accordance with DIN 18195. The SK 100 structural seal is used for one-layer sealing of components in contact with the ground.

bitumen-free mineral crack bridge can be painted and plastered. Two-component, bitumen-free, solvent-free, very flexible, snappy sealing compounds for components, contact with the ground to protect against moisture. Indoors and outdoors for the manual production of permanent, flexible seals for earth-contacting structures for use in horizontal and vertical applications. Consumption depending on the case of loading: approx. 3 - 4 kg / m² per layer: approx. 1.5 - 2 kg / m² Color blue-green