مخاليط البناء بالجملة على Qoovee

Repeatedly washed, fire-dried quartz sand. For sanding primers, steam brakes and seals. For the production of filler etching and synthetic resin mortar. For filling epoxy and polyurethane resins and mineral fillers.

glitter effect gold and silver for all RAL colors The glitter effect is created by mixing the glitter of a joint with an FMY 90 epoxy compound. As a sparkling showstopper or backlight to be able to set additional accents on the tiles. Consumption200 g / 6 kg of grout Color gold and silver

for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered, food safe, water and frost resistant, super smooth, high strength and flexible pearl grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator for Color gray, white, silver gray, Manhattan gray, cement gray, jasmine, bahama, silk gray, hazelnut, sand gray, camel , sanitary gray, walnut brown, bali, basalt, anthracite, black

dust control high resistance high absorbency fast and easy handling stress relieving heat-retaining, self-leveling special filler with high yield and high absorbency. Very low emission, drying by hydration. Only indoors is it possible to produce even, highly absorbent substrates in layers up to 15 mm thick prior to the installation of floor coverings and parquet floors. Especially suitable for underfloor heating systems, for laying rubber and polyolefin coatings. Consumption about 1.1 kg / m² per layer thickness mm

suitable for laying parquet, tiles and natural stone safer on problem substrates relieves stress Relief of tension reinforcing fleece for laying parquet, tiles and natural stone, especially on problem substrates. Can be used as a reinforcing underlay under solid parquet and ready-to-install parquet, as well as on all conventional, ready-to-install substrates. Especially for use on poor, low-strength substrates and in the renovation sector for dry screeds, chipboard and mastic asphalt. Color white

easy to spread a wide range of applications economical application Odorless, high quality dispersion adhesive. Indoor only, for bonding homogeneous, PVC, floor and wall coverings into tiles and membranes, and for textile floor coverings with latex smooth foam and latex stamped backs, latex backs or polyurethane foam backs. Suitable for underfloor heating systems and wheel loads. Consumption approx. 300 - 450 g / m², depending on the substrate and the back of the covering

fiber-reinforced rigid adhesives and high dimensional stability high initial adhesion short flash times universally applicable Very low emission dispersion adhesive, solvent-free, fiber-reinforced dispersion adhesive with high initial adhesion and rigid adhesion grooves for increased dimensional stability requirements ... Minimized residual indentation behavior. Indoor only for adhesion of PVC, designer coatings and PVC-CV coatings in membranes and boards, rubber coatings in membranes and boards up to 3.2 mm. Consumption approx. 250 - 350 g / m², depending on substrate and back cover

fast coating ability high early and final strength universally applicable saves storage costs through universal use Very low dissipation, high quality, extremely adhesive multi-functional adhesive for flexible and textile floor coverings. For homogeneous and heterogeneous PVC coatings in sheets, PVC designer coatings in boards and tiles, linoleum coatings, rubber coatings up to 4 mm, textile coatings with all common substrates, as well as light needle coatings. Consumption PVC, designer coatings, CV, rubber sheets in sheets: scalloped A2 approx. 280 - 330 g / m², linoleum, cork: scalloped B1, B2 approx. 330 - 370 g / m², needle fleece, woven fabric, carpet with second back: notched B2 approx. 330-370 g / m²

Gypsum plaster. Thickness 3-10 cm

very good depth effect bonding-restoring effect fast drying Easy to work primer for parquet floors. Good penetration characteristics reduce lateral adhesion. Indoors as a primer for subsequent sealing with all MUREXIN waterborne parquet varnishes. For use on all common local hardwoods. Consumable l: about 7 - 8 m² (video)

high occupancy very smooth finish glossy and satin finish Water-based parquet sealant based on high quality polyurethane-acrylic with very good processing properties. Forms a good housing and results in very good mechanical and chemical resistance values. Indoors for sealing wooden floors and parquet. The flow container (10 liters) is sufficient for 2 applications on an area of about 42 m²

good mechanical strength good pouring ability smooth finishing Water-based, one-component polyurethane-acrylic based parquet sealant. Wear-resistant and well-filled surface. Indoors for sealing wooden and parquet floors with medium loads. The flow container (10 liters) is sufficient for 2 applications on an area of about 42 m²

high abrasion resistance very good chemical resistance for frequently visited parquet surfaces Water-based parquet sealant based on high quality polyurethane. Due to its high wear and chemical resistance, NX 85 has properties comparable to a two-component system. Forms a good body and has excellent technological properties. Indoors for sealing wooden floors and parquet. The flow container (10 liters) is sufficient for 2 applications on an area of about 40 m²

Eco-friendly water-based non-slip Non-slip water-based care product for sealed parquet and wood floors, sealed cork (closed cell), PVC and linoleum. The care product dries without polishing in a dirt-repellent, durable and non-slip film. In a room for initial and complete maintenance, as well as for permanent technical cleaning of parquet and all other wooden floors. Consumption Initial, complete care: approx. 30 - 40 ml / m² (= 30 - 50 m² / l)

simple treatment suitable for all water-based oiled wood floors. Solvent-free water-based maintenance oil for the repair and restoration of oiled wood floors. Ideal for surfaces treated with natural oil NP 90 Color to maintain and enhance the color tone. Increases the durability of the floor. In a room for initial, complete maintenance and maintenance of oiled parquet and wood floors, as well as for initial maintenance of oiled wood floors. Apply evenly with a polishing applicator or soft wool cloth. Avoid puddling and leaving soaked cloths on oiled wood floors (staining). Apply sparingly in an even thin layer. Consumption about 30 - 40 m² / l

permanently elastic suitable for old floors suitable for joints up to 5 mm high filling capacity solvent-free water-based, solvent-free and permanently elastic joint sealant, especially for renovating old floorboards with very wide joints up to 5 mm. Reduces side adhesion. Only indoors for wood cement production by adding wood sanding dust. Suspended floors and nailed wood floors cannot be permanently sealed. Consumption1 liter, depending on the width of the hinge: 10 m²

optimal sanding fast drying solvent-free odorless Aqueous, solvent-free and free of wood cement odor. Fast drying and excellent sanding properties. Only indoors for wood cement production by adding wood sanding dust. For joint filling of parquet and other wooden floors with joint width up to 1.5 mm. Not suitable for floorboards and paving stones. Consumption of 1 liter is sufficient for 20 m² Color white

fast drying good pouring ability removes minor scratches for perfect end result Fast drying gelatin intermediate layer with excellent filling properties. Can be recoated with all Murexin Aqua waterborne parquet varnishes. Indoors as an intermediate layer or for filling small scratches and seams. Suitable for underfloor heating systems. Not suitable for priming raw wood. Consumption about 30 - 35 m² / kg

can be applied to all types of wood barrier effect fast drying reduce side adhesion Special barrier effect primer for extensive insulation from woody ingredients. The primer penetrates deep into the wood and forms the ideal surface for re-finishing with any MUREXIN waterborne parquet lacquer. Use indoors only. Especially for problematic and exotic woods. Provides natural, neutral wood intensification.

good cleaning effect burns without smoke and odor frost protection for windshield washer system Suitable for home use and DIY. For cleaning tiles, glass, chrome, etc. It can also be used in industry and by hobbyists as a solvent. Can be used to clean tools when handling MS products.

high strength for existing surfaces matt Transparent matt seal for interior wall areas exposed to high chemical and mechanical stress. Ideal for dispersion coatings in kitchens, hallways or children's rooms. Low emission and no solvents. Consumption about 150 ml / m² per layer

fast drying fastness up to 650 ° C Fast drying solvent based painter color. Odorless and heat resistant for indoor use. The indoor silver color has good adhesion and heat resistance (up to 650 ° C). For coating ovens, chimneys, radiators, steam pipes, steam boilers, etc. Consumption approx. 100 ml / m² per coat Color silver

ready to process suction compensation adhesion enhancement Ready-to-use primer. Organic binder, silicone additives, mineral filler, additives, water-binding medium and suction compensation ensure uniform coloration of the final coating, additional water repellency of the substrate. Universal primer for both outdoor and indoor use. Consumption about 0.20 - 0.25 kg / m² when filling, about 0.40 kg / m² on a plaster base with one coating, Quality assurance: Self-monitoring by our own factory laboratory. Third party monitoring of ongoing production control by a notified body. Color white

Premixed, mineral powder adhesive and wall mortar (filler) for indoor and outdoor use, with high adhesive strength. Water absorbent and easy to process. For adhesion and reinforcement of ENERGY White / Gray and XPS insulation panels and for filling and unloading load-bearing plasters and concrete surfaces. For nominal thicknesses from 3 to 5 mm. Consumption adhesion: about 4 -5 kg ​​/ m², Filler: about 3.5 - 4.5 kg / m², Cement, organic binding medium, sand, additives. Quality Assurance: Own monitoring by our own factory laboratory. Third party monitoring of ongoing production control by a notified body.

ready-to-use high filling power easy handling Ready-to-use white hand-held filler for versatile indoor applications. High filling capacity and pliability ensure smooth and precise processing of light sandy finishing aggregates. For standard filling work on indoor walls and ceilings, but also best suited for grouting works as well as for butt and surface filling. Layer thickness: up to 5 mm at each stage of work. Consumption approx. 1.5 kg / m² per layer mm Color white

ready to use for efficient processing high whiteness Ready to use, paste in a standard quality white filler spray. Suitable for indoor walls and floors, for general filling jobs such as joints and surface fillings, as well as for filling structures. High whiteness and maximum filling capacity thanks to the use of a high quality combination of filling materials. Layer thickness: up to 2 mm at each stage of work. Consumption approx. 1.75 kg / m² for filling a surface with a layer of 1 mm, approx. 0.5 - 1 kg / m² for structural filling Color white

for layers up to 5 mm thick for efficient machining of machines for non-standard substrates Very high filling capacity, ready-to-use organic compound for spray filler for internal machining. The product is ready to use. Can be easily processed over large areas, especially on rough substrates. The material remains permeable to layers up to 5 mm thick and can be cut into a flat surface ready for painting or wallpapering. Indoors, for filling holes and joints in walls and ceilings, as well as for thick-layer surface fillings on uneven substrates. Layer thickness: up to 5 mm at each stage of work. Consumption about 1.75 kg / m² for a layer thickness of 1 mm Color white

aroma-free high dissolving power good cleaning effect High-quality cellulose dilution without aromatics.

high yields thanks to lightweight aggregates can be processed manually or by machine for non-compressive layers ≤ 5 mm. Highly efficient paste-like aggregate for manual and machine processing indoors. The special combination of fillers allows a wide range of applications. The material can be applied in layers up to 5 mm and can be leveled. High quality lightweight filler allows easy troweling and drying with little shrinkage. Consumption approx. 1.5 kg / m² for a layer thickness of 1 mm Color white

based on natural lime base high permeability improves indoor climate DURAPID CA 480 finely divided lime aggregate is a powdered fine lime based aggregate for manual and machine processing indoors. For production, the smooth areas of the fillings are diffusion opened, which contribute to the regulation of humidity and, thus, a comfortable room climate. Consumption approx. 1.2 kg / m² per mm of layer thickness Color white

admissible total deformation up to 15% coated with RAL UZ 123 (Blue Angel) without solvents, phthalates, glycols, APEO-, isocyanate- and silokones Free of organohalogen and organotin compounds Ready-to-use one-component acrylate-based sealant with improved elasticity ... Water soluble, lightfast, low odor, solvent and phthalate free. For filling joints and cracks inside and outside of premises on plaster, concrete, masonry, drywall, wood and chipboard, stone, absorbent ceramics, aluminum and corrosion-resistant metals. It is also especially suitable for joining the sealing joints of wooden and metal window frames, for shutters, internal and external window banks, aerated concrete, concrete and wooden elements, partitions. Not suitable for permanently wet loads. Consumption approx. 12.5 m2 for 5 mm x 5 mm connection Color white

Excellent workability with solvent-free coating. Ready-to-use, one-component, acrylate-based sealant. Water soluble, lightfast, low odor, solvent and phthalate free. For filling joints and cracks indoors and outdoors, only slight movements can occur on plaster, concrete, masonry, drywall, wood and chipboard, stone, absorbent ceramics, aluminum and corrosion-protected metals. Not suitable for wet loading. Consumption about 12.5 m2 for a 5 mm x 5 mm connection

solvent-free fast drying anti-corrosive Dispersion filler, solvent-free. Very fast drying repair filler, good filling, rust inhibition, low pollutant content, no cracks up to 1 mm wet layer. High productivity. Can be layered several times in a short time and is very good for sanding. Color white

breathable, pre-cement. Low-load, breathable, mineral-white, cement-based, manual filler. Can be used indoors and outdoors. For smoothing, improving and filling facades, as well as improving cracks and holes in walls and ceilings. Substrates can be masonry, concrete, plaster and other mineral substrates.

ready to work resistance to weathering excellent water repellency permeable Ready to work, with paste, synthetic resin thin layer plaster (finishing plaster) .. Thin plaster with etched or corrugated structure, white or colored, for external and internal use. Can be processed by hand or by machine. Organic binder, mineral fillers, color pigments, additives, water. Protection and design of facades and interior wall surfaces on old and new mineral plasters and fillers, on concrete, for the processing of organic interlaced fillers and plasters, as a final coat for all thermal insulation systems, as well as on repair plasters. Weatherproof, very good water-repellent, permeable, washable, glossy colorant, can be heavily mechanically loaded, easy to process. Observe the lightness values ​​(HBW) (at least 25!) For use in thermal insulation systems or thermal insulation plasters. Consumption 1.5 mm grass structure 2.5 kg / m², 2 mm pickling compound 2.9 kg / m², 3 mm pickling compound 3.9 kg / m², 2 mm slotted structure 2.8 kg / m², 3 mm slotted structure 3.9 kg / m², Quality assurance: Own control by our own factory laboratory. Third party monitoring of ongoing production control by a notified body.

water-thinnable good resistance suitable for tank floor coatings Silky matt water-thinnable concrete coating, solvent free, very good adhesion to concrete floors, abrasion resistant, good coverage. Weatherproof, resistant to water, cleaning agents, fuels, mineral oil, dilute acids and solutions, and numerous chemicals in the medium to long term. Suitable for painting and roller application. Ideal for covering concrete floors, screeds in basements and utility rooms, laundries and other wet areas, oil collection trays. Outside for covering balconies and terraces, concrete stairs, etc. Not suitable for garage floors. Finished material: silver gray RAL 7001 and gray gray RAL 7032. Tinted in the shade in groups 1 - 4. Tintable in 113 RAL and 209 MUREXIN Eurocolors & Essence of Colors color tones. Consumption approx. 200 - 250 ml / m² per coat Gravel gray, silver gray

High protection against rust for undercoats and coats. Weatherproof. Non-puffy, silky matte 3-in-1 anti-corrosion paint. Primer, rust protection and topcoat in one product. Non drip, high rust protection, weather resistant, easy to handle. One coat for iron, aluminum and fresh or weathered zinc surfaces such as gutters, garage doors, tin roofs, etc. Do not use thinners for treatment if possible. Clean instruments with Oxylin AF 200 nitro toner. Consumption approx. 100 - 150 ml / m² per coat Color oxide red, reseda green, silver gray, anthracite gray, sepia brown, white

The active anti-rust pigment is recoated after about 1 hour. lead-free and chromate-free, active primer free from rust, dry fast. Can be recoated after a short time with synthetic resin paints. As a rust protection primer for iron parts, iron gates, steel structures, vehicles, machines, etc. Consumption approx. 150 - 200 g / m² per coat Color gray green, oxide red, white

ready-to-use non-bribery reinforcement for leveling absorption based on hydrosol Ready-to-use non-pigmented deep primer based on high quality acrylic hydrosol. For embedding and deep priming. Hardens slightly sandy substrates and leads to absorption equalization for highly absorbent substrates. Low emission and no solvents. Consumption about 100 - 200 ml / m²