Z-shaped food belt conveyor for snacks
وصف السلعة
1. The length of the lower horizontal part is 1000 mm, the inclined part is 5950mm, the upper horizontal part is 500mm. 2. The total width of the belt is 165 mm, the distance between the sidewalls is 65 mm. 3. Height from floor to working surface, initial 200mm, final 2805mm 4. The angle of inclination is no more than 26 degrees 5. Supporting the upper branch of the metal sheet 2mm thick. 6. PVC tape Paris with a thickness of 2.4 mm, food grade total width 165 mm, indent at the edges by 20 mm, corrugated board 40 mm high, partitions 40 mm high, 150 mm pitch, 65 mm long. 7. Drum diameter 120mm 8. Geared motor NMRV040-90ob-22Nm-0.25kW / 900-380V-IP54. 9. Nominal speed 0.578m / sec. 10. Drive - belt drive. 11. Stainless steel hopper with a volume of 200-300 liters. Hopper height from floor 1000mm 12. The cost of the conveyor is calculated based on a load of 0.5 kg / rm. 13. There is no reverse 14. Start-stop button. 15. Speed ​​control by frequency converter 16. Stationary 17. All metal parts of the structure are made of black painted steel (except for the hopper). 18. The conveyor is delivered in a disassembled form: the supports are separate from the carrying part. 19. Vibrator MVSI 3/1000-S02
قراءة المزيد

Z-shaped food belt conveyor for snacks - 10828

تحقق من التوافر
1849.14 USD/قطعة 1849.14 USD

أجل الحد الأدنى: غير محدد

القدرة على التسليم: غير محدد

ООО «Энерготех», г.Барнаул
مورد لم يتم التحقق منه
روسيا
معلومات الشحن

احسب واستكمل نقل البضائع الخاصة بك إلى أي مكان في العالم باستخدام Qoovee Logistics.

شحنة مضمونة في الوقت المحدد ودفع آمن احسب الشحن من Qoovee

منتجات مماثلة

المورد:
"Узлегпром"
اكتب لنا ، نحن متصلون بالإنترنت!