其它设备批发在 Qoovee市场

Fastening of the axle bridge (bridge-frame) to the emergency tank is carried out by means of two magnetic blocks М250, similar to used in the "Console" unit. The magnetic blocks are hingedly held together to the housing, inside of which the carriage moves along the guides with the sealing unit, which includes a press-screw and a rubber element.The set of delivery includes two types of sealing element: a cone and a gasket with diameters of 20 mm. Replacing one sealing element with another takes no more than 3 seconds.A cone is used to seal round gaps and holes, and a flat gasket is used for cracks or a group of small fistulas. Due to the movements of the carriage relative to the body and the sealing unit relative to the carriage, the sealing element is supplied directly to the leakage.The "aiming" zone is a 50x50 mm square surface. The surface to which the magnetic grippers will be attached is must be cleaned from dirt and coating.Product technical characteristics:Type - Bridge-frame (axle bridge) unitPressing force of the magnetic blocks to the metal surface - Not less than 2 * 250 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmThe maximum diameter of the sealed gap - At a pressure of 60 atm - not less than 7 mmInstallation time, min - 1-2Required number of workers - 1-2Dimensions, mm - 347x111x151Weight, kg - 5.4Service life - At the very least 10 years.

The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!

应用：变压器内部的油主要起绝缘作用，此外，它们还具有抑制电晕放电和电弧的作用，还可以作为机器内部的制冷剂。这些油必须绝对清洁和干燥，以实现并保持最佳的绝缘性能和介电强度。这就是变压器油净化的需要。 ASSEN ZYD 变压器油净化器是变压器可靠性、性能和耐用性的关键。变压器的绝缘油必须不含水分、溶解的气体和随着油老化而积累的颗粒。甚至一些新油也可能需要加工以将其含量限制在可接受的水平。特点： 1. 对高效绝缘油处理厂的期望。 2、适用于大型电力变压器安装维修中的油处理、油抽真空和热油循环。 3. 操作简单无故障。 4、工艺参数在线测量和记录。处理后 水分 PPM 3 气体含量% 0.01 杂质尺寸 µm ≤ 1（无游离碳） 击穿电压 kV ≥ 75 IFT 达因 / cm ≥ 40 酸值 mgKOH / g ≤ 0.03 介电损耗因数 tan δ (90 °C) ≤ 0.001 ASSEN保证根据本规范提供的设备在正常使用和服务下不会出现材料和工艺缺陷，自发货之日起二十六 (26) 个月或启动后二十四 (24) 个月。系统。 ... ASSEN 在本保修条款下的义务仅限于修理或提供类似部件以更换在保修期内被证明有缺陷的任何部件。 1.我们根据您的要求定制机器。 2. 我们有超过 20 年的出口经验。 3. 我们以有竞争力的价格为客户提供高质量的产品。 4. 我们为客户提供优质的售后服务。 5.我们不满意，直到我们的客户满意。

WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.

HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.

Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.

Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.

SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.

Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.

Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.

Characteristic: Providing substantial and stronger water current to improve pond water circulation and oxygenation. With more impellers than normal model, which can benefit a large breeding area, thus, less power consumption and less investment cost. Few aerator is needed, reduce maintenance and labor costs. With diesel engine drive, especially suitable for area without electricity support and for emergency use. "100% New Raw Materials" are guaranteed to be used in our products.

Characteristic: Best Quality Silicon Steel Plate. Energy Saving. High Oxygenation Performance From Unique Design. Sturdy Stainless Steel Frame Ensure Without Any Deformation. Easy Maintenance. The Unique Aerator Motor Made Under "ISO9001"And "ISO14001" System. "100% New Raw Materials"are guaranteed to be used in our products.   Note: Since May 2017 Our New 1 HP / 2 HP three-phase high efficiency electricity saving motors Will Be Launched.  Feel free to contact us if you are interested in our new product.

Mainly Designed For Lake & Sea. Be Able To Be Used For Harvest. Resist Maximum to 6M Wave. Still Very Strong And Working Well During Typhoon. Having Good Feedback From The Biggest Tilapia Farm In The World And Other Governmental Projects.   Function: Marine cage farming system can be used in various water environments including lake, sea and river, etc. Suitable for intensive farming. Suitable for different species, such as Tilapia, Japanese Sea Bream, Goldlined Sea Bream, Cobia, Greater Amberjack, Blue-Banded Sea Perch, Spangled Emperor (Sand Snapper, Parrot-Fish), Snappers, Yellow-Wax Pampano, Orange-Spotted Grouper, Red Drum, Catfish, Striped bass, Bluegill sunfish, Crappie, Carp, etc.   Characteristic: "One-Piece Injection Molded" HDPE 80 Bracket, extremely sturdy. HDPE 80 Floating Pipe and HDPE 100 Handrail Pipe offer excellent ESCR (Environmental Stress Cracking Resistance) and resist deformation. High carbon component, strong UV resistance ensures sound durability, low maintenance and investment cost. Removable Handrail T Bar makes more easily assembling, simplified harvesting & efficient maintenance as well as resistant to corrosion. Heavy duty standing pole. Bear heavier net weight. All the "Round" and "Square" shape cages can be tailor-made.

1.        Core Box Size (LxHxW) mm: 600x400x300 2.        Max. Core Size (LxHxW) mm: 520x380x300 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 1 15-30 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2900 kgs 11.    Dimension(m): 2.5x3.7x3.3

1.        Core Box Size (LxHxW) mm: 500x400x250 2.        Max. Core Size (LxHxW) mm: 420x380x200 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 15-25 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2700 kgs 11.    Dimension(m): 2.1x3.5x3.1

1. Power: 5-7.5 HP 2. Core loading size (m / m): 400 X 330 3. NOT. blades: 3 4. Weight (kg): 350 kg 5. DShV (m / m): 110 X 800 X 140 6. Productivity (kg / h): 500 kg / h

1. Maximum. Core size (L x H x W): 480x260x250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm

1. Maximum. Core size (L x H x W): 480 x 260 x 250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm

1. Model: KM-1 2. Maximum. core box size: 160 x 220 mm 3. Maximum. t. core: 350 cubic meters. 4. Debit: 100-150 pcs / hour 5. Required air pressure: 3-5 kgf / cm2 Kao Kuen Industrial Co., a professional manufacturer of rod firing and molding machines, has accumulated solid knowledge and experience in creating the most efficient, economical and durable machines for over 30 years.

1. Size of the main box (L x H x W): 500 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 420 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Heating type: LPG or electric 6. Maximum. Blow: 15-25 kg 7. Sand storage capacity: 200 - 300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 3200 kg 11. Size: 3100 x 2500 x 3650 mm

1. Core box size (L x H x W): 500 x 300 x 250 mm 2. Maximum. Core size (L x H x W): 420 x 280 x 200 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of heating: LPG or Electrica 6. Maximum. Blowing: 15-25 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2400 kg 11. Dimensions: 2010 x 3340 x 2850 mm

1. Core box size (L x H x W): 550 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 470 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of message: LPG or electric 6. Maximum. Blowing: 15-30 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2500 kg 11. Dimensions: 2010 x 3340 x 2850 mm

1. Box size (LxHxW) mm: 550x400x300 2. Max. Core size (LxHxW) mm: 470x380x250 3. Operating mode: manual / single cycle / automatic cycle 4. < / span> Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Page type: LPG or electric 6. Max. Blow: 15-30 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2800 kg 11. Dimensions (m): 2.3x3.6x3.2

Steam cleaning is a machine that can be used in a wide variety of places. The aim is to provide hygiene and to clean with the power and pressure of steam without using water without pollution. Advantages Provides a hygienic cleaning as all germs are killed. It does not require rinsing after cleaning. Provides cleaning without leaving stains. If you clean a surface with water, there would definitely be a stain. With the pressure of the steam and the power of the temperature, it loosens the dirt on the surface and allows you to clean without using chemicals. Areas to be used: We produced this machine especially as Hec Makina Chemistry to clean the exterior of honeycombs (inside the grills) and we knew that it is actually used in many sectors. Please watch the videos of the applications. For technical support, you can reach us at 05464214985. You can use 10 bar steam pressure 220 v 50 hz 30 minutes dry steam or 10 minutes moist steam. Thanks to the turbo mode, it shortens the heating time. 9 lt tank You can use the product as moist steam when you want, as dry steam. Bundled Items 1 gun 2 nozzles 1 gun hose 1 Hec Steam Machine Product Dimensions 34x48x63 Machine Weight 27.5 kg

Product name Fill for Liangchi cooling tower Product material PVC / modified CPVC Regular sizeHeight * Length (radial drawing) 800mm*750mm1000mm*750mm1200mm*750mm400mm*1220mm Sheet thickness 0.28mm~0.45mm Corrugation height 19mm Color Black/Green Operating temperature -20℃~68℃

Purpose:   ·          Cleaning a large amount of dirt, dust, various debris; ·          Sand, crushed stone, stones, details; ·          Metal shavings and metal chips during metal cutting and polishing; ·          Collection of chemical and toxic liquids and oils; ·          Cleaning of plastic parts when processing plastics; ·          Cleaning of textile waste from natural and synthetic raw materials: wool, cotton, linen, silk, artificial and synthetic fibers, synthetic threads; ·          Cleaning fine dust, working with a grinding machine, etc. Connection parameters:   ·          Power supply: 3x380 / 50 V / Hz; ·          Electric power: 4 kW;   Features of the model: ·          Large tank on wheels made of stainless steel for collecting waste 120 liters; ·          Equipped with a compressor and automatic filter pneumatic cleaning (allows you to maintain the durability of the filter and maintain the correct suction capacity); ·          The cleaning efficiency reaches 0.3% mcr, 99.99%; ·          The vacuum cleaner is equipped with a HEPA fine filter, the filter area is 25000 cm²; ·          Designed to work in intensive, continuous mode (24 hours); ·          There is a system to protect the motor from overheating.   The standard delivery set includes: ·          Vacuum cleaner - 1 piece; ·          Hose (high-strength, low aerodynamic resistance, antistatic design, diameter 50 mm, length 5 meters) - 1 piece; ·          Steel pipe rod (antistatic design, length 1 meter) - 1 piece; ·          HEPA filter - 1 piece; ·          Replaceable nozzles: sex nozzle, crevice nozzle, round nozzle with bristles;   Country of origin - China Warranty - 12 months for the vacuum cleaner, 12 months for the turbine Electric power - 4 kW Waste collection tank - 120 l Power supply voltage - 380 V Air flow at the entrance to the vacuum cleaner - 420 m³ / hour Air purification efficiency - 99.9% Mode of operation - continuous, round the clock Covering - stainless steel Length - 1040 mm Width - 640 mm Height - 1320 mm Weight - 120 kg Length in packing - 1230 mm Packing width - 670 mm Packing height - 1630 mm Noise level - no more than 70 dB Filter material area - 25000 cm² IP protection class - IP21 Power cable length - 8 m Maximum suction power - 280 Mbar

CHARACTERISTICS 60 liter cyclone tank; Power 2.4 / 2.8 / 3 / 3.6 & nbsp; kW at choice; Universal vacuum cleaner designed for cleaning large areas from any kind of debris, water, non-combustible liquids, oils, sticky fractions, metal shavings and scale, any non-explosive fine dust; The vacuum cleaner is equipped with 2 turbines, a unique 2-stage vortex filtration system and an additional third stage & ndash; an air filter that completely collects dust with a particle size of more than 0.3 microns (when installing a HEPA filter of our production); Equipped with a turbine fuse; Installed on an agile and compact frame with 4 & nbsp; wheels (large and small). Small swivel wheels are equipped with stoppers. BASIC EQUIPMENT A set of nozzles: a floor nozzle 360 ​​mm, a crevice nozzle with a nap, a crevice nozzle universal, a round nozzle with a nap, a set of rubber inserts for cleaning water; Rod for vacuum cleaner; Hose for vacuum cleaner & nbsp; (standard, 5 & nbsp; m); Filter elements (ultrafine filter set & nbsp; and & nbsp; turbine cooling filter). Power 2400 W & ndash; 88 250 & nbsp; rub. Power 2800 W & ndash; 102 500 & nbsp; rub. Power 3000 W & ndash; 90 750 & nbsp; rub. Power 3600 W & ndash; 103 125 rub. & nbsp;

Equipment for bottling and for the production of alcohol is on sale. The price is negotiable. Details by phone.

Enameled barrels of 25 cubic meters. Food grade. In the amount of 64 pieces. Bargaining Is Appropriate. Details by phone.

Brand - Mikron Model - TEP-2 Weight - 1.85 kg Volume - 0.00770 m3 Mechanical press for installing metal fittings

The tubular motor is composed of a tubular casing, a drive assembly, a brake assembly, and a stroke control assembly supported in the tubular casing through a bearing seat. It has the advantages of the small occupied area, low energy consumption, and quick start-up. Hangzhou Wistar Mechanical is a tubular motor manufacturer. The company’s specialty products are radio tubular motor and roller shutter tubular motor. The advantages of these products are of high quality and reasonable prices]

We will find machines, equipment, Mini and Large Plants and Factories, bring and install. Quality is our priority

Capping machine Zh7-UMT-6 is designed for vapor-vacuum sealing of cans and bottles with Twist-Off caps. It is used at enterprises of the canning industry of medium power. * Productivity, vessels / min 40 - 130 * Machine diagram linear * Closing method spec. belts The technical level of the machine meets the best foreign counterparts in Germany and Italy. The machine has a modern design, easy to operate, adjust, maintain and repair. The machines are in demand by canneries in Ukraine, Russia, Belarus, Kazakhstan and Moldova. The advantages of this closure method: * clogging with elastic deformation of the lid elements, which excludes the destruction of glass containers during clogging and opening; * there is no oxygen in the sealed container, which makes it possible to extend the shelf life of products; ease of use, since no special devices are needed to open the lid.