Security & Protection in bulk on Qoovee

Model: IPC314SB-ADF28K-I0 Maximum resolution 4 Mpix Fixed lens 2.8 mm IR illuminator with a range of up to 30 m microphone Network 4 Mp mini-dome anti-vandal video camera for outdoor installation with Smart IR illumination up to 30 meters. Lens: 2.8mm Image sensor: 1/3" CMOS, resolution 2688 × 1520:30fps Viewing angle: 101.1° Technology: WDR 120dB, Ultra 265/H.264/MJPEG Day/Night: Auto IR cut filter switching (ICR) Integration: ONVIF, API Audio: G.711, two-way audio support Microphone Minimum spread: Color 0.003 lux (F1.6, AGC ON), with IR 0Lux Protection class: IP67,IK10 Operating temperature: from -40° C to +60 °C Power supply: 12V DC ± 25%, PoE Power consumption: 6 W Memory card slot: micro SD (256Gb) Weight: 0.37 kg IPC314SB-ADF28K-I0 Camera sensor 1/3", 4.0 megapixel, progressive scan, CMOS DORI lens Distance Lens (mm) Detection (m) Observation (m) Recognition (m) Identification (m) 2.8 63 25.2 12.6 6.3 FOV (H) 101.1° FOV (H) 55.3° Viewing Angle (O) 111.1° Adjustment Angle Pan: 0° ~ 90° Tilt: 0° ~ 68° Pan: 0° ~ 360° Shutter Auto/Manual, 1 ~ 1/100000s Minimum Illumination Color: 0.003 Lux (F1.6, AGC ON) 0 Lux with IR Day/Night Auto-switching IR cut filter (ICR) Signal-to-noise ratio >56 dB IR R Range Up to 30 m (98 ft) IR range IR wavelength 850 nm 120 dB Video Video compression Ultra 265, H.265, H.264, MJPEG Code profile H.264 Base profile, Main profile, High frame rate Main stream: 4 MP (2688*1520), max. 30 fps; 4 MP (2560*1440), max. 30 fps; 3 MP (2304*1296), max. 30 fps; 2MP (1920*1080), max. 30 fps; sub stream: 720P (1280*720), max. 30 fps; D1 (720*576), max. 30 fps; 640*360, max. 30 fps; 2CIF (704*288), max. 30 fps; CIF (352*288), max. 30 fps; third stream: D1 (720*576), max. 30 fps; 640*360, max. 30 fps; 2CIF (704*288), max. 30 fps; CIF (352*288), max. 30 fps; Video bit rate 128Kbps~16Mbps Corridor mode 9:16 Supported OSD mode Up to 8 OSDs Privacy mask Up to 4 areas ROI Up to 8 areas Motion detection Up to 4 areas White balance Auto/Outdoor/Fine tuning/Sodium lamp /Locked /Auto2 Digital Noise Reduction 2D/3D DNR Smart IR Support Flip Normal/Vertical/Horizontal/180°/90° CW/90°CCW Dewarping N/A BLC Supported HLC Supported Audio G.711 Audio Compression Bidirectional audio Supported Suppression Supported sample rate 8 kHz Storage Edge Storage Micro SD, up to 256 GB Network-attached storage ANR, NAS (NFS) Network protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS , DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS compliant ONVIF integration (Profile S, Profile G, Profile T), EZStation EZViewEZLive API Client Realtime: IE9+, Chrome 41 and below , Firefox 52 and below Live View Plugin: Chorme 57.0+, Firefox 58.0+, Edge 16+, Safari 11+ Interface Audio in/out Audio cable 1 Input: im pedance 35kΩ; amplitude 2 V [p-p] 1 Output: impedance 600 ohms; amplitude 2V [p-p] Built-in microphone Supported network 1 RJ45 10M/100M Base-TX Ethernet Certifications Certifications CE: EN 60950-1UL: UL60950-1FCC: FCC Part 15 Total power 12 VDC ± 25%, PoE (IEEE 802.3 af) Power consumption: Max. 6.0 W Dimensions (Ø x H) Φ110 x 61 mm (Ø4.3” x 2.4”) Net weight 0.37 kg (0.82 lb) Material Metal + plastic Operating environment -30°C ~ 60° C (-22° F ~ 140°F), humidity: ≤95% RH (non-condensing)

Model: IPC2224SE-DF40K-WL-I0 Maximum resolution 4MP Fixed lens 4.0mm IR up to 30m Angle of view: 103.0° IPC2224SE-DF40K-WL-I0 IPC2224SE-DF60K-WL-I0 Camera sensor 1/1.8", 4.0 megapixel progressive scan CMOS Minimum Illumination Color: 0.0005 Lux (F1.0, AGC ON) Shutter Auto/Manual, 1 ~ 1/100000 s Adjustment Angle Pan: 0° ~ 360° Tilt: 0° ~ 90° Pan: 0° ~ 360° WDR 120dB Signal to Noise Ratio >56dB Lens Lens aperture Fixed field of view (H) 103.0° 62.40° of vision (D) 134.6° 76.75° DORI DORI long-range lens (mm) Detection (m) Observation (m) Recognition (m) Identification (m) 4.0 62.1 24.8 12.4 6, 2 6.0 93.1 37.2 18.6 9.3 Backlight LED Distance Up to 30 m (98 ft) Number of LEDs 2 LED On/Off Control Auto/Manual Video Video Compression Ultra265, H.265, H.264 , MJPEG H.264 code profile Base profile, Main profile, You Low profile Frame rate Main stream: 4MP (2688*1520), max. 30 fps; 4MP (2560*1440), max. 30 fps; 3 MP (2304*1296), max. 30 fps; 1080P (1920*1080), max. 30 fps; sub stream: 720P (1280*720), max. 30 fps; D1 (720*576), max. 30 fps; 640*360, max. 30 fps; 2CIF (704*288), max. 30 fps; CIF (352*288), max. 30 fps; third stream: D1 (720*576), max. 30 fps; 640*360, max. 30 fps; 2CIF (704*288), max. 30 fps; CIF (352*288), max. 30 fps; Video bit rate 128Kbps~16Mbps U-code OSD support Up to 8 OSD menus Privacy mask Up to 4 ROI areas Up to 8 areas Video Stream Triple Stream White Balance Auto/Outdoor/Fine Tuning/Sodium lamp/Locked/Auto2 Digital Noise Reduction 2D/3D DNR Intelligent Lighting Support Flip Normal/Vertical/Horizontal/180°/90° CW/90°CCW Dewarping N/A HLC Support BLC Support Anti-Fog Digital Anti-Fog Smart Intelligent Prevention Intrusion Support False Alarm Filtering: Line Crossing Detection, Intrusion Detection, Area Entry Detection, Area Exit Detection Statistical Analysis People Counting, Support People Flow Counting and Crowd Density Monitoring Events Basic Detection Motion Detection, Tampering Alarm, Sound Detection Common Functions sign, IP Address Filtering, Alarm In, Alarm Out, Access Policy, ARP Security, RTSP Authentication, User Authentication Audio G.711 Audio Compression Audio Bitrate 64Kbps Bi-directional Audio Suppression Supported Sampling Rate Supported 8KHZ Storage Edge Storage Micro SD, up to 256GB Network storage ANR, NAS(NFS) Network protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP , HTTPS, SMTP, 802.1x, SNMP, QoS, RTMP, SSL/TLS, SSH-compliant ONVIF integration (Profile S, Profile G, Profile T), API, SDK User/Host Up to 32 users. 2 user levels: administrator and standard user Security Password protection, strong password, HTTPS encryption, activity log export, basic and digest authentication for RTSP, digest authentication for HTTP, TLS 1.2, WSSE and digest authentication for ONVIF client EZStationEZViewEZLive Plugin Web -browser Live View Required: IE9+, Chrome 41 and below, Firefox 52 and below Live View without plug-ins: Chorme 57.0+, Firefox 58.0+, Edge 16+ Interface Audio I/O: 35 kΩ impedance; amplitude 2 V [p-p] Output: impedance 600 ohms; amplitude 2V [p-p] Alarm I/O 1/1 RS485 N/A Built-in microphone N/A Built-in speaker N/A WIFI N/A Network 1 * RJ45 10M/100M Base-TX Ethernet Video output N/A EMC certifications CE- FCC CFR 47 Part 15 B, ANSI C63.4-2014) Safety CE LVD (EN 62368-1:2014+A11:2017) CB (IEC 62368-1:2014) UL (UL 62368-1 2nd Ed., Issue date: 01.12.2014) Environment CE-RoHS (2011/65/EU;(EU)2015/863); WEEE (2012/19/EU); Reach (Regulation (EC) No. 1907/2006) Degree of protection IP67 (IEC 60529:1989+AMD1:1999+AMD2:2013) IK10 (IEC 62262:2002) Total power 12 V DC ± 25%, PoE (IEEE 802.3af) Power Consumption : Max. 9.0 W Power interface Ø 5.5 mm coaxial power connector Dimensions (L × W × H) 245 × 86 × 85 mm (9.6” × 3.4” × 3.3”) Weight 0.87 kg ( 1.92 lb) Material Metal Operating environment -30°C ~ 60°C (-22°F ~ 140°F), humidity: ≤95% RH (non-condensing) Storage environment -30°C ~ 60°C ( -22°F ~ 140°F), humidity: ≤ 95% RH surge protection (non-condensing) 4kV reset button supported

Model: IPC3612LE-ADF28KC-WL Maximum resolution 2 Mpx Fixed lens 2.8 mm IR illuminator 30m range Built-in microphone and speaker Outdoor 2 Mp IP dome camera with Smart IR illumination up to 30 meters. Fixed lens: Image sensor: 1/2.8" CMOS, resolution 1920×1080:30fps Viewing angle: 106.7° Technology: WDR, Ultra 265/H.265/H.264/MJPEG Day/Night: Auto-switching IR cut filter (ICR ) White light, distance up to 30 m Integration: ONVIF, API Memory card slot: micro SD up to 128 GB Corridor mode 9:16 Built-in microphone and speaker Minimum illumination: Color 0.01 Lux (F2.0, AGC ON), with IR 0Lux Protection class: IP67, 4KV Operating temperature: -30°C to +60°C Power supply: 12V DC ± 25%, PoE Power consumption: 7 W Weight: 0.3 kg Material: Metal + plastic.

2 MP Outdoor Camera with Smart IR up to 30 meters and Wi-Fi IPC2122SR3-F40W-D Fixed Lens: 4.0mm, F2.0 Image Sensor: 1/2.7" CMOS, Resolution 1920x1080:20fps Viewing Angle: 86.5° Technology: DWDR 120dB, Ultra 265, H.265, H.264, MJPEG, Wi-fi Day/Night: Auto Switching IR Cut Filter (ICR) Integration: ONVIF, API Minimum Illumination: 0.02Lux, with IR 0Lux Protection Class: IP67 Temperature operating: -30°C to +60°C Power supply: 12V DC ± 25% Power consumption: 5.5 W Memory card slot: micro SD (256Gb) Weight: 0.25 kg IPC2122SR3-F40W-D Camera Sensor 1/2.7", 2.0 megapixel, progressive scan, CMOS Lens DORI Distance Lens Detect(m) Observe(m) Recognize(m) Identify(m) 4mm 60 24 12 6 Angle of view(H) 86.5° Angle of View (V) 44.1° Angle of View (O) 106.4° Shutter Auto/Manual, 1~1/100000 s Minimum Illumination Colour: 0.02 Lux (F2.0 AGC ON)0 Lux with IR on Day/Night IR-cut filter with auto switch (ICR) Digital noise reduction 2D/3D DNR S/N >52dB IR Range Up to 30m (98 ft) IR range Defog Digital Defog WDR DWDR Video Video Compression Ultra 265, H.265, H.264, MJPEG H.264 code profile Baseline profile, Main Profile Frame Rate Main Stream:2MP (1920×1080): Max . 20fps Sub Stream: 720P (1280×720): Max. 20 fps; Third Stream: 4CIF (704×576): Max. 20 fps HLC Supported BLC Supported OSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 2 areas Motion Detection Up to 4 areas Storage Edge Storage Micro SD, up to 256 GB Network Storage ANR Network Protocols IPv4, IGMP, ICMP, ARP , TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP,QoS Compatible Integration ONVIF(Profile S, Profile G, Profile T), API Wi-Fi Wireless Standards IEEE802.11b/g/n Frequency Range 2.4 GHz ~ 2.4835 GHz Channel Bandwidth 20 MHz Support Modulation Mode 802.11b: CCK, QPSK, BPSK802.11g/n: OFDM/HT Security 64/128-bit WEP, WPA/WPA2, WPA -PSK/WPA2-PSK, WPS Transmit Power 802.11b: 17±1.5dBm style="box-sizing: border-box;" style="box-sizing: border-box;" />802.11n: 12.5±1.5dBm style="box-sizing: border-box;" /> Receive Sensitivity Transmission Rate 802.11b: 11Mbps802.11g: 54Mbps802.11n: up to 150Mbps H) 162.6 × 62.4 ×62.7 mm (6.4” × 2.5” × 2.5”) Weight 0.25 kg (0.55 lb) Working Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity: ≤ 95% RH(non-condensing) Ingress Protection IP67 Reset Button Supported

IPC2122LB-AF28WK-G IPC2122LB-AF40WK-G Camera Sensor 1/2.9", 2.0 megapixel, progressive scan, CMOS Minimum Illumination Colour: 0.01 Lux (F2.0 AGC ON)0 Lux with IR on Day/Night IR-cut filter with auto switch (ICR) Shutter Auto/Manual, 1~1/100000 s Adjustment Angle Pan: 0° to 360°, Tilt: 0° to 90°, Rotate: 0° to 360° S/N >52dB WDR DWDR Lens Lens Type 2.8mm and 4.0mm Fixed-focal Lens Mount M12 Angle of view(H) 101.1° 83.7° Angle of View (V) 55.0° 44.6° Angle of View (O) 111.0° 89.1° DORI DORI Distance Lens Detect(m) Observe(m) Recognize(m) Identify(m) 2.8mm 45.0 18.0 9.0 4.5 4.0mm 64.3 25.7 12.9 6.4 Illuminator IR Range Up to 30m (98 ft) IR range Wavelength 850nm IR On/Off Control Auto/Manual Video Video Compression Ultra 265, H.265, H.264, MJPEG H.264 code profile Baseline profile, Main profile, High profile Frame Rate Main Stream: 1080P (1920*1080), Max 30fps; 720P (1280*720), Max 30fps;Sub Stream: 720P (1280*720), Max 30fps; D1 (720*576), Max 30fps; 640*360,Max 30fps; 2CIF(704*288), Max 30fps; CIF(352*288), Max 30fps; Video Bit Rate 128 Kbps~6 Mbps OSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 8 areas Motion Detection Up to 4 areas Image White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2 Image Setting Image rotation, brightness, saturation, contrast, sharpness, gain adjustable by web browser Digital noise reduction 2D/3D DNR Smart IR Supported Flip Normal/Vertical/Horizontal/180° Dewarping N/A HLC Supported BLC Supported Defog Digital Defog Audio Audio Compression G.711 Suppression Supported Sampling Rate 8KHZ Storage Edge Storage Micro SD, up to 128GB Network Storage ANR,NAS(NFS) Network Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, RTMP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL/TLS, SNMP Compatible Integration ONVIF (Profile S, Profile G, Profile T), API , SDK Security Password protection, Strong password, HTTPS encryption, Export operation logs, Basic and digest authentication for RTSP, Digest authentication for HTTP, TLS 1.2, WSSE and digest authentication for ONVIF Client EZStationEZViewEZLive Web Browser Plug-in required live view: IE9+, Chrome 41 and below, Firefox 52 and below Plug-in free live view: Chorme 57.0+, Firefox 58.0+, Edge 16+ Wi-Fi Wireless Standards IEEE802.11b/g/n Frequency Range 2.4 GHz ~ 2.4835 GHz Wireless Range Up to 130 m (The performance varies based on actual environment) Channel Bandwidth 20 MHz Support Modulation Mode 802.11b: CCK, QPSK, BPSK802.11g/n: OFDM/HT Security 64/128-bit WEP, WPA-PSK/WPA2-PSK Transmit Power 802.11b: 17±1.5dBm style="box-sizing: border-box;" style="box-sizing: border-box;" />802.11n: 12.5±1.5dBm Receive Sensitivity Transmission Rate 802.11b: 11Mbps802.11g: 54Mbps802.11n: up to 150Mbps Interface Network 1 * RJ45 10M/100M Base-TX Ethernet Built-in Mic Supported Certification EMC FCC: FCC Part 15 Safety CE: EN 60950-1UL: UL60950-1IEC 60950-1 General Power DC 12V±25% Power consumption: Max 4.0 W Power Interface Ø 5.5mm coaxial power plug Dimensions (L × W × H) 172 × 76 ×72 mm (6.8” × 3” × 2.8”) Weight 0.25 kg (0.55 lb) Material Graphene + Plastic Working Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity:≤95% RH(non-condensing) Strorage Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity:≤95% RH(non-condensing) Surge Protection 4KV Reset Button Supported Ingress Protection Ingression protection: IP67

Cubic 2 MP video camera with Smart IR illumination up to 10 meters and Wi-fi support. Fixed lens: 2.8mm, F2.0 Image sensor: 1/2.7" CMOS, resolution 1920x1080:30fps Viewing angle: 100° Technology: DWDR 120dB, Ultra 265, H.265, H.264, MJPEG, Wi-fi Day/Night : Auto-switching IR filter (ICR) Minimum illumination: 0.02Lux, c IR 0Lux Built-in microphone and speaker Operating temperature: -10°C to +40°C Power supply: 5V DC ± 10% Power consumption: 2.3W Card slot Memory: micro SD (256Gb) Weight: 0.14 kg

The biometric identification terminal Uface 8T-H Temp is a model with a built-in high-precision non-contact thermal module of a new class - a thermal imaging camera. An important function of the model is the ability to determine the presence of a protective medical mask on a person's face. Uface 8T-H Temp is a high-end face recognition device with maximum human flow processing speed and reliability, which uses a deep learning algorithm. The device has an integrated thermal module, which provides stable and accurate non-contact temperature measurement in the forehead area of ​​a person. Functional features: Built-in Mifare card reader, Active backlight with motion detection, Fully autonomous operation, 8-inch IPS touch screen, Built-in database up to 100 thousand faces, Recognition accuracy 99.99%, Recognition speed less than 1 sec., Class IP65 protection, Wi-Fi, Built-in non-contact thermometer with ±0.5℃ accuracy, Temperature range 30~45℃.

Anviz T50 is a compact and convenient next-generation biometric access control system that implements user identification by fingerprint and password. Equipped with a high performance TI 300 MHz DSP processor, and as a result, high speed fingerprint identification. Anviz T50 has the most compact design in its class . The system has an LCD display, a keypad and a sensitive optical fingerprint reader. Device control via RS485 or TCP/IP (Ethernet) .Direct lock control (built-in relay) .The case is made of high impact industrial plastic .Ideal value for money Processor 32-bit ARM MCU BioNANO V10 algorithm AFOS300 Optical Sensor fingerprint scanner Scanning area 22mm* 18mm Resolution 500 DPI Display black and white LCD, blue backlight Number of prints in the device memory 1,000 Event log capacity 50,000 Anviz T5S remote (slave) fingerprint reader connection yes Identification method Fingerprint, ID+Fingerprint, ID+Password Recognition time <0.5 sec False Access Denial Probability 0.001% False Access Probability 0.00001% Interfaces RS485, Mini USB, TCP/IP (Ethernet), Wiegand Output Relay (dry contacts) yes Door open sensor yes Power supply 12V Size 74mm* 144mm*40mm Temperature range -10℃~ 40℃ Body material Wear-resistant industrial plastic

Anviz M5 is the only professional anti-vandal biometric access control system (ACS) based on fingerprints and contactless RFID cards in the line. The system can be used both for outdoor and indoor installation. The terminal case is made of metal and high-strength, wear-resistant industrial plastic. Degree of protection - IP65 (Ingress Protection 65), i.е. Full protection against dust and protection against water jets in any direction. Thus, when buying it, you can be sure that Anviz M5 will not let you down, even in extremely adverse conditions. It should be especially noted that the body of the terminal has a degree of protection IK10 - protection against impacts and acts of vandalism. The terminal is equipped with a Wiegand interface for connection with the included Anviz SC011 controller to enhance the security level of an existing ACS. Terminal management, as well as adding/removing users, can be implemented both on the device itself and remotely (via TCP/IP). It is possible to connect a remote (slave) fingerprint reader and contactless cards Anviz T5S Processor TI Stellaris® 32-Bit High Speed ​​CPU BioNANO V10 algorithm Finger scanner AFOS307 Optical Sensor Scanning area 22mm * 18mm Resolution 500 DPI Number of prints in the device's memory 2,000 Capacity event log 100,000 Identification method Fingerprint, Card, Fingerprint+Card Identification time < 0.5 sec False rejection probability 0.001% False acceptance probability 0.00001% Interfaces RS485, TCP/IP, Wiegand Remote fingerprint and RFID connection Anviz T5S card reader yes EM-Marine card reader 125 kHz (standard) Wiegand output Fingerprint pattern auto-update yes Protection rating IP65; IK10 Door open sensor yes Power supply, V 12 V Current consumption, mA 100-150 mA Direct control of the lock yes Alarm, when opening the case yes Energy saving mode yes Material Metal and wear-resistant industrial plastic

The Uface 5 compact wall-mounted biometric identification terminal will allow you to manage personnel access through authorized doors based on a specific schedule and, if necessary, two-factor identification. Face identification, in combination with door servomotors, will help organize contactless access of personnel to warehouse and production facilities, even when people's hands are busy or dirty. If necessary, it is possible to implement two-factor authorization using a face and an RF card. A deep learning algorithm allows you to quickly and accurately identify personnel by face, and a built-in backlight with a motion sensor will allow you to install the terminal even in darkened rooms. 50,000 users, 1 million records, dual-core high-speed ARM Cortex processor, 5-inch full-view IPS LCD touchscreen, 1080*800 resolution, WDR camera with progressive scan CMOS camera, TCP/IP, Wiegand output, relay Output, RS485, RJ45, Linux OS, Dual Camera Live Body Detection System, Wifi, Card, IK07, IP54 Built-in Mifare Card Reader Face Recognition: up to 5 at the same time Power supply 12V 2A 0℃～45℃ Size 190mm*87.5mm*17 mm.

The Anviz D200 Standalone Biometric Attendance System is an ideal, cost-effective solution for small and medium-sized companies. Exquisite design, ergonomic and compact (the thinnest in its class). Intuitive Russified interface, voice prompts. Put it on the table or mount it on the wall and the device is ready to go. To upload data, simply plug it into your computer's USB. No installation required (detected as a USB drive). Fully autonomous terminal, due to the integrated high-capacity LiIon battery. Anviz D200 is an easy, reliable and convenient solution to employee attendance problems in your company. Anviz D200 desktop terminal is one of the most successful and reliable employee time tracking systems developed by Anviz. Ideal solution for small companies. It features an elegant design and is the thinnest device in its class. No installation required at all. Simply place the terminal on a table or mount it on a wall! At any time, you can view the information of the arrival and departure of employees. Simply connect the Anviz D200 via USB to your computer, upload the data to the attendance software and get the reports you need. You don't even have to install drivers - the system will work like an ordinary USB drive. Anviz D200 with built-in battery is a universal and simple solution to your company's employee attendance problems! AFOS307 Optical Sensor Reader Identification Methods Fingerprint, ID+Fingerprint, ID+Password, Fingerprint+Password Display 128*64 blue LCD Reading time < 0.4 sec False rejection rate 0.001% False acceptance rate 0.00001% Number of stored fingerprints 2 000 Number of records stored 5 0000 Interface USB, TCP/IP Power supply DC 5V; 0.2A-0.3A Battery 1100 mA (≈ 6 hours standby) Temperature / Humidity -10°C to 40°C / 20% to 80% Size 157mm x 119mm x 35mm Case material ABS industrial plastic

Office Optical USB Fingerprint Scanner. The U Bio Reader uses a shatterproof, durable, ruggedized fingerprint scanner that is resistant to adverse operating conditions (water, dirt, scratches). Used for remote registration of new ACS users. Allows you to register new employees on the computer, and then send fingerprint templates to the access control and management system. USB interface. Fingerprinting in less than 0.4 seconds Desktop biometric USB fingerprint reader for scanning fingerprints in Anviz applications and security systems. Housing made of wear-resistant industrial plastic. Scanning area 22x18mm, resolution 500 DPI. Interface - mini USB (replaceable cable). Power supply 5V via USB. Options - SDK with template building and recognition functions. Material Plastic Country of origin USA Manufacturer Anviz Application Indoor Form factor Portable Color Black

C2 Pro is a high performance access control and time attendance terminal designed for the mid to high end market segments. Powered by an efficient 1GHz dual-core processor, the C2 Pro delivers the fastest performance, completing comparisons in less than 0.5 seconds. The user-friendly interface and 3.5" TFT display make it easy to operate the terminal. Multiple RFID readers (HID, ALLEGION or ANVIZ) can be used, as well as communication via TCP/IP or WiFi depending on the requirements. C2 Pro software is based on the operating system Linux system, and includes development packages (SDK and EDK) to customize the system for a specific customer.The terminal includes a relay for calling and communicating with an access control system, as well as an RS232 port for a printer.This allows you to meet the requirements of users for such systems Humidity 0% to 90% Verification mode Fingerprint (1:N, 1:1), password, card Number of fingerprints 5000 (1:N), 200000 (1:1) Number of event log entries 100000 HID Prox Card iClass Card Yes Allegion Card Yes RFID system 125KHz EM 13.56MHz Mifare(default)/DesFire/ISO 14443A(optional) WiFi Yes TCP/IP Yes Relay Yes Internet server Yes Power supply 5…12V DC, 1A Ha barite dimensions 140х190х32 Certificates CE, FCC, RoHS

The Anviz D100 biometric system has been discontinued and has been replaced by the Anviz D200 device. A system for monitoring and recording working hours for small and medium-sized companies. Processor 32-bit ARM MCU. Optical sensor AF0S300, 500 DPI Display 128*64. 1000 employees, 2000 fingerprints, 50000 events. Modes: fingerprint, login+fingerprint, login+password, fingerprint+password. Identification time less than 0.5 seconds. USB, 16 customizable views and schedules. Dimensions 160(W)*130(H)*90(D)mm. Working temp -10℃~40℃. Power supply DC 5V or USB. Number of users 1000 people Country of manufacture USA Manufacturer Anviz Warranty period 12 months Color Black Supply voltage 12 V

Fingerprint protection system (WM-5000X1) Remove 200 groups of fingerprints Alibaba 200 groups of alarm clock Task tips  900 Call voice alert Wireless software free Software advantages ● Pedometer You can check the number of steps of patrol officers in the patrol report. patrol situations.● Fingerprint function (for X1 and X1-BLE) After this function is enabled, the patrol officer must check the fingerprint before reading the card. After successful verification, the worker can read the map within 15 seconds. ● Multiple computers working together (JWM Cloud Software only) You can also check the patrol report in time when you are not in the company. Consists of: 1 piece RFID wand reader with fingerprint authentication, flashlight 1 pc. USB cable5 pcs. 125 kHz RFID checkpoints 2 pcs. Personnel LabelsFingerprint FunctionFor X1 and X1-BLE, you can enable fingerprint verification to prevent patrol officers from looking for someone else to patrol. Task PromptSet the voice reminder in the software and upload the voice pack to the checkpoints. After reading, a voice packet will be played. Ohter function● Alarm clock: up to 200 sets. Emergency alarm: 1, 2 and 3 meters can be set. The patrol reader that falls from a certain height will send alarm data to the software.● Pedometer: The patrol reader will automatically track the number of steps while patrolling.● Voice prompt: Each step of the device will have a corresponding voice prompt.● Fingerprint: up to 200 sets. Read checkpoints within 15 seconds after confirmation.● Task hint: up to 200 sets. After reading, a voice packet will be played. ● Temperature: The screen can display degrees Fahrenheit or Celsius. Size 160mm × 50mm × 34mm Weight 314g IP Rating IP67 RFID Reading Mode 125KHz Reading Distance 3cm - 5cm Communication Pogo pin USB (Drive-Free), 15000 downloads/min Operating Temperature -40℃~+85 ℃ Battery 3.7V/2000mAh rechargeable lithium batteries Battery life 1. Read 500 records per day, turn on the flashlight for 2 hours, use 9 days. 2. Read 500 posts a day for 45 days. 16 days after low power. 3. After low power for 16 days of use. Storage capacity 16Mb flash, 60,000 pieces Fast vibration + OLED display + voice Tag identification number 10-bit hexadecimal in the reader (5 bytes).

Fingerprint protection system (WM-5000X1) Remove 200 groups of fingerprints Alibaba 200 groups of alarm clock Task tips  900 Call voice alert Wireless software free Software advantages ● Pedometer You can check the number of steps of patrol officers in the patrol report. patrol situations.● Fingerprint function (for X1 and X1-BLE) After this function is enabled, the patrol officer must check the fingerprint before reading the card. After successful verification, the worker can read the map within 15 seconds. ● Multiple computers working together (JWM Cloud Software only) You can also check the patrol report in time when you are not in the company. Consists of: 1 piece RFID wand reader with fingerprint authentication, flashlight 1 pc. USB cable5 pcs. 125 kHz RFID checkpoints 2 pcs. Personnel LabelsFingerprint FunctionFor X1 and X1-BLE, you can enable fingerprint verification to prevent patrol officers from looking for someone else to patrol. Task PromptSet the voice reminder in the software and upload the voice pack to the checkpoints. After reading, a voice packet will be played. Ohter function● Alarm clock: up to 200 sets. Emergency alarm: 1, 2 and 3 meters can be set. The patrol reader that falls from a certain height will send alarm data to the software.● Pedometer: The patrol reader will automatically track the number of steps while patrolling.● Voice prompt: Each step of the device will have a corresponding voice prompt.● Fingerprint: up to 200 sets. Read checkpoints within 15 seconds after confirmation.● Task hint: up to 200 sets. After reading, a voice packet will be played. ● Temperature: The screen can display degrees Fahrenheit or Celsius. Size 160mm × 50mm × 34mm Weight 314g IP Rating IP67 RFID Reading Mode 125KHz Reading Distance 3cm - 5cm Communication Pogo pin USB (Drive-Free), 15000 downloads/min Operating Temperature -40℃~+85 ℃ Battery 3.7V/2000mAh rechargeable lithium batteries Battery life 1. Read 500 records per day, turn on the flashlight for 2 hours, use 9 days. 2. Read 500 posts a day for 45 days. 16 days after low power. 3. After low power for 16 days of use. Storage capacity 16Mb flash, 60,000 pieces Fast vibration + OLED display + voice Tag identification number 10-bit hexadecimal in the reader (5 bytes).

The WM5000V4s device is a continuation of the classic VM5000V5 model, but with the addition of a bright LED light to the design, which helps to make detours on unlit routes at night. The device is used to control bypasses by reading passive RFID tags with saving data in memory with subsequent transfer of data to the program using a magnetic USB cable or by connecting to a smartphone for data transfer via mobile Internet. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program under Windows and with a WEB cloud. The body of the device is made of aluminum alloy with a silicone shell and impact-resistant plastic, which guarantees increased wear resistance. On the front of the case there is a touch button to turn on the flashlight, and its parameters can be configured in the program. When the tag is read, the blue LED lights up on the indicator and vibration occurs, and when the battery is low, the device signals with a red indicator. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter for clearing the memory after data is transferred to the program. The battery charge lasts for 60 days when reading tags 500 times a day. The main advantage over competitors is comparable to the WM5000V5 model, this is high performance and a bright LED flashlight, amazing reliability and a service life of 10 years, as well as a simple and well-thought-out program. Dimensions, mm 148 x 42 x 34 Memory 60,000 entries Battery 3.7V/1150mA, Water and dust protection IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3-5 cm Communication with PC Speed data transfer via USB : 15000 records/minute Indication in the device Vibration with color LED notification (red, green, blue)

The system is designed to control, register and record events recorded by the security service in the process of patrolling a protected area, and allows the heads of security companies to control the conscientiousness and accuracy of the performance of their duties by the security service. The hardware and software are intended for programming the Patrol Detour system and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems and has the following main functions: reading information, programming properties, clearing the reader's memory; creating patrol routes by patrol areas and bypass points; entering all route events into the database and restoring from the database; creating reports with printing.Main components and technical characteristicsReaderThe reader is designed to receive (read) data from the bypass points established along the route of the patrol.Case material: plastic, metal with a rubberized shell Protection class: IP67 Reader type: Touch Memory Protection class: IP67 Automatic registration of shocks Number of events in memory: 60,000 records Personnel ID tagObject tagSet of event tags Alarm clock mode Built-in flashlight PC connection: USB, magnetic contact Overall dimensions: 140 x 45 x 30 mm. Operating temperature range: from -40о to +85оС Weight: 200g. Format: Touch Memory Dallas1990A Size: 55 mm x 21 mm x 8 mm Weight: 4.3 g Format: Touch Memory Dallas1990A Size: diameter 16 mm x 5 mm Weight: 2.8 g Format: Touch Memory Dallas1990A Number of tags: 8 Weight: 71.6 g

WM-5000S guard tour reader is our latest RFID guard tour system. It inherits all the advantages of WM-5000V+. With a special waterproof gasket and adhesive, the guard tou reader is so waterproof that it can even work underwater. In addition, more than 60,000 readings can be stored until the next data download. The WM-5000S security device reader has its own features, light and smaller size, bright color, design, rechargeable battery, etc., which make it suitable for not only security tour route guard, as well as in areas such as hotels, hospital checks.WM-5000S guard tour reader works with popular RFID tag. With a simple contactless swipe, you can access the information from the tag and then upload the patrol data to our intelligent control program with a USB port. Information messages may show security guards monitoring. One set of WM-5000S RF system including: 1. WM-5000S reader2. rfid tags3. identity card 4. USB5 cable. In case wallet6. Software Portable RFID tag reader. Housing ABS plastic. Protection class IP-67, reading range 3-5 cm. USB data transfer. The built-in memory capacity is 60,000 entries.

WM-5000L5 is a state-of-the-art RFID (Radio Frequency IDentification) tag reader for patrol patrol monitoring system with real-time information transmission function. WM-5000L5 has the ability to communicate with the control center and send all the information from the reader directly to the control center via GPRS channel. In addition, the WM-5000L5 reader has the "Pansic Button" function in case of an emergency: a security officer in an emergency can press the alarm button, after which the control center can determine the location of the employee and provide him with assistance. The reader can be used to monitor employees security, work and location of personnel, property tracking (vending machines), airport security and warehouse systems (identification), patrolling, inspection of remote equipment and operating manuals. RFID tag reader. Housing ABS plastic, protection class IP-65, reading range 3-5 cm. Ability to communicate with the control center and send all information from the reader directly to the control center via the GPRS channel. Panic button function in case of emergency. Data transfer USB, GPRS. Memory capacity 15000 records.

RFID tag reader with wireless data acquisition technology. Housing material: Plastic, protection class - IP67. Built-in LCD display. Built-in flashlight and compass. Reading range - 3-5 cm.

The RFID reader is a device for monitoring the conscientious and timely fulfillment of duties by the security service. The device is made of plastic and metal with a rubberized shell, has an IP67 protection class, and can be used in all weather conditions. Reading type - contactless (Proximity) with a reading range of 3-5 cm, with an operating frequency of 125 kHz. The number of events in memory is 60,000 entries, which corresponds to 4 months of recording, under normal use (500 per day). Battery: 3.7 V Lithium, capacity 800 mA / h. Each bypass point and token has its own unique identification number, which is registered inside the transmitter and transmitted through the antenna when brought to the point / token of the reader inducing a magnetic field sufficient to transfer the identification number to the reader's memory. The identification numbers of points and tokens in the program correspond to the entered text description, which is displayed in the generated report. The reader is designed to receive data from bypass points established along the patrol route. To confirm the reading, vibration and light indication is used. This system is used to organize monitoring of industrial and residential facilities, pipelines, warehouses, banks, motor depots, airports, railway stations, etc. The hardware and software are designed to program the Patrol system. detour” and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems. Main functions: • reading information, programming properties, clearing the reader's memory; • creating patrol routes by patrol areas and bypass points; • entering all route events into the database and restoring from the database; • creating reports with printout. System composition Reader with wireless data acquisition technology, bypass points, personal tokens of security guards. Reader • Housing material: plastic, metal with a rubberized shell • Protection class: IP67 • Overall dimensions: 130 x 40 x 28 mm • Reading type: contactless (Proximity) • Operating frequency: 125 kHz • Operating temperature range: from -40° to +85°C • Humidity: up to 90% non-condensing • Memory: 4MB Flash ROM • Number of events in memory: 60,000 records • Indication: reading: vibration + light, charging - light • Battery: 3.7 V Lithium, capacity 800 mA/ h, deep discharge protection • Reading range: 3-5 cm • PC connection: USB cable, speed 57600 BPS, 4000 records/min. • weight: 200 g Guards' bypass points and personal tokens • Parameter: bypass point / token • Format: EM • Case material: ABS plastic • Case shape: Round or cylindrical • Weight: 2 g • Operating temperature range: from -20°C up to +50°C • Operating frequency: 125 kHz • Data type: unique 64 bit serial number (read only).

The RFID reader is a device for monitoring the conscientious and timely fulfillment of duties by the security service. The device is made of plastic and metal with a rubberized shell, has an IP67 protection class, and can be used in all weather conditions. Reading type - contactless (Proximity) with a reading range of 3-5 cm, with an operating frequency of 125 kHz. The number of events in memory is 60,000 entries, which corresponds to 4 months of recording, under normal use (500 per day). Battery: 3.7 V Lithium, capacity 800 mA / h. Each bypass point and token has its own unique identification number, which is registered inside the transmitter and transmitted through the antenna when brought to the point / token of the reader inducing a magnetic field sufficient to transfer the identification number to the reader's memory. The identification numbers of points and tokens in the program correspond to the entered text description, which is displayed in the generated report. The reader is designed to receive data from bypass points established along the patrol route. To confirm the reading, vibration and light indication is used. This system is used to organize monitoring of industrial and residential facilities, pipelines, warehouses, banks, motor depots, airports, railway stations, etc. The hardware and software are designed to program the Patrol system. detour” and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems. Main functions: • reading information, programming properties, clearing the reader's memory; • creating patrol routes by patrol areas and bypass points; • entering all route events into the database and restoring from the database; • creating reports with printout. RFID tag reader. Housing ABS-plastic, protection class IP-65, reading range 3-5 cm. GPRS, GSM. Has the function "Panic button" Data transfer USB, GPRS. Memory capacity 15000 records.

EM format, ABS plastic housing. The body shape is round. Operating temperature range From -20°C to +50°C, Operating frequency 125 kHz. Data type : 64 bit serial number.

The WM5000P4D device is equipped with a GPS receiver for tracking the location of the device and using GPS tags, has the function of voice calls to 5 numbers, helps the employee with voice alerts during work, and also has a SIM card slot for online control of bypasses by reading passive RFID and GPS tags from by transferring data to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, and data can also be transferred using a magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. On the side of the case there is an SOS button and a phone call control button. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, as well as vibration and a voice notification. When the battery is low, the display and red indicator show this information, a voice alert is played, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter to clear the memory after data is transferred to the program. The battery charge lasts an average of 2 days when reading tags 500 times a day using GPS sending every minute. The device is fully charged in 2 hours. The main advantage of the device is the ability to track GPS location and GPS tags, make voice calls and transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Set: reader, cable, power adapter, cover. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (19 hours when sending data every 15 sec.) Water and dust protection IP 67 Application temperature -50℃~+85℃ Tag reading RFID tags 125KHz, reading distance 3-5 cm Communication 4G/GPRS/GSM/GPS, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display, LED indicator and voice alert.

The WM5000L4 device is a standard model with a SIM card for online control of bypasses by reading passive RFID tags with data transfer to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, the data can also be transferred using magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. There is an SOS button on the side of the case. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, and vibration occurs. When the battery is low, the display and red indicator show this information, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and in the default program settings there is a parameter for clearing the memory after transferring data to the program. The battery lasts for 4 days when reading tags 500 times a day. The device is fully charged in 2 hours. The main advantage of the device is the ability to transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (4 days) Protection against water and dust IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3 -5cm 4G/GPRS/GSM communication, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display and LED indicator.

Biometric terminal for access control and time attendance systems with fingerprint and card recognition. Housing made of industrial plastic with protection against moisture and dust according to the IP53 standard. Built-in optical fingerprint scanner and Em-Marin RFID card reader. Monochrome LCD display, backlit keypad, LED and audible indication. Status toggle buttons, 8 customizable toggle event types, work code registration. Support 16 user groups and 32 time zones, real-time monitoring. Built-in relay for lock control, IR finger sensor, support for PoE standard IEEE802.3af. Interfaces: Ethernet, mini USB, RS-485, Wiegand 26/34 (input/output), exit button, door sensor, case intrusion sensor. Identification by: card, finger, ID, card + finger, ID + finger, ID + card. Number of stored fingerprints: 2000. Number of stored events: 50000. Registration of users and events in offline and network modes. Anti-passback function with optional Anviz T5s reader. Size: 80(w)*180(h)*40(d)mm. Power supply 12V (from an external power supply or via PoE), from USB (without connecting a lock). The power supply is not included in the package. Free Russified AIM CrossChex software with time tracking functions included. Options - Mifare card reader, separate executive controller (SC011), additional output reader (T5S), 1C integration module, InTime Server, SDK. Processor 32-bit ARM MCU BioNano V10 algorithm Fingerprint scanner Optical sensor (sensor) AF0S300 Scanner activation mode Automatic activation using infrared sensor Scanning area 22mm x 18mm Resolution 500 DPI (dots per inch) LCD type 128*64 dots. Number of fingerprints in device memory 2000 Number of RFID cards in device memory 2000 Number of events in device memory 50000 Recognition modes Fingerprint, login + fingerprint, login + password, password + card, fingerprint + card Recognition time less than 0.5 sec FRR (type 1 recognition error) 0.001% FAR (type 2 recognition error) 0.00001% Communication interfaces RS485, USB device, TCP/IP, Wiegand (input/output switchable) Built-in card reader Built-in reader: 125KHZ EM RFID, Optional : 13.56MHZ Mifare Fingerprint display Yes Self-selection of the event status during registration 8 Work classifier Yes Messages 50 Notifications 30 Control of DC 12V executive devices, output to external devices (COM, NO, NC) Access groups and work schedule 15 access groups, 32 temporary gap Door lock sensor Yes Acoustic emitter (siren) Yes Operating voltage DC 12V Dimensions 80(w)*180(h)*40(d)mm Tempera outdoor mode -10℃~40℃ Degree of protection IP53(Waterproof housing) Certifications FCC, CE, GOST R(GOST R) Maximum number of employees in the system Up to 1000 employees Options Mifare card reader, separate executive controller (SC011), additional exit reader (T5S), 1C integration module, SDK, InTime server

Miniature biometric terminal for access control systems with a fingerprint and card scanner. Fits on the door leaf. Dust-, moisture - resistant case, IP54. Built-in fingerprint and card reader (Em-marin), finger sensor, LED backlight and audible alarm. Identification by: finger, card, finger + card, 3000 fingerprints, 50000 events. Interfaces: Ethernet, mini USB, RS-485, Wiegand 26/34 output, exit button. Registration of users and events in offline and network modes. Size 145x55x37 mm. Power supply 12V, USB, POE. Free Russified AIM standard or CrossChex software complete with time tracking functions. Anviz P7 is an innovative new generation biometric access control system Advanced Anviz BioNano fingerprint recognition algorithm Powerful processor and shock-resistant housing Backlit touch keyboard High-contrast and durable OLED display (organic light-emitting diode display) Powered by both external source and PoE Memory for 3,000 fingerprints, 3,000 cards and 50,000 event records Built-in EM-Marine proximity card reader Built-in relay (dry contacts) to control actuators (locks, turnstiles, etc.) Wiegand In&Out, TCP/IP, RS485 and Mini USB port Remote (slave) fingerprint reader and contactless cards Anviz T5S can be connected New generation fingerprint scanner AFOS407 - durable, waterproof, dustproof and scratch resistant 50,000 event records Auto-update template fingerprint logs of registered users Intuitive Russian-language interface USB and TCP/IP data exchange for remotely adding new employees to the device memory, managing the device and integrating into other access control systems Embedded Anviz software (included free of charge) Ease of installation: easily mounted on the door frame Ideal solution for employee access control and time tracking TI Stellaris® 32-Bit High Speed ​​CPU BioNANO algorithm AFOS407 Optical Sensor Fingerprint Scanner 128mm*64mm display of fingerprints in device memory 3,000 Event log capacity 50,000 Identification method Fingerprint, Card, ID+Fingerprint, ID+Password, Password+Card, Fingerprint+Card Identification time <0.5 sec False rejection rate 0.001% False acceptance rate 0, 00001% Interfaces RS485, USB, TCP/IP, Wiegand In&Out Read module EM-Marine cards 125 kHz Relay Direct control of the lock (turnstile, barrier, etc.) Wiegand 26 output/input Connection of remote (slave) fingerprint reader and RFID cards Anviz T5S yes Anti-Passback function ) yes Auto-update fingerprint template yes Open door sensor yes PoE yes, IEEE802.3af and IEEE802.3at Power supply 12V, 800mA Touch activation yes Power saving mode yes Alarm when case is opened yes Short message reception yes Size 54mm*170mm*41mm Material Wear-resistant industrial plastic

Anviz FacePass7 is an employee time tracking system with face recognition, contactless RFID cards or password. Guarantees user identification in less than 0.5 (!) seconds. Capacity for 3,000 users Logbook 100,000 event records Two scanning cameras ensure the most accurate identification, and a high-speed processor minimizes the time to recognize employees' faces Even factors such as skin color, facial expression, gender, hairstyle do not affect the accuracy and speed of identification , as well as the presence or absence of vegetation on the face Unique infrared illumination ensures stable operation of FacaPass7 even in complete darkness Sensitive 3.2” TFT touch display Voice guidance for user actions for ease of use of the terminal Direct control of the lock (dry contacts) USB-flash for download - TCP / IP (Ethernet) data upload for data exchange and device control over the Internet Alarm when opening the case. Contactless identification. Equipped with a new architecture and artificial intelligence. The infrared detection of Face Pass 7 provides 24/7 accurate identification and effectively prevents fake faces such as photos or videos. Secure identification in various environments and conditions With over a million faces worldwide verified, FacePass 7 has become one of the most accurate face recognition terminals , suitable for various conditions Even factors such as skin color, facial expression, gender, hairstyle, as well as the presence or absence of vegetation on the face do not affect the accuracy and speed of identification. Unique infrared light, ensures FacaPass7 works even in total darkness Built-in ultra-wide-angle camera provides 120-degree identification. Brand/Manufacturer LCD Display Type Number of Device Memory Events Messages Recognition Modes FAR Error (Unregistered User Access) FRR Error (Registered User Access Denied) Maximum Number of Employees in System Communication Interfaces Scanner Activation Mode Power Supply Operating Environment Dimensions Warranty Anviz 3 ,2” TFT touch display 100,000 50 Face, password and RFID 0.1% 1% up to 3,000 people TCP/IP, USB host infrared sensor 12 V -20°...+60 °C; humidity up to 95% 54 x 170 x 41 mm 1 year

The Uface 7 Pro biometric identification terminal in a waterproof case is designed for wall mounting.Uface 7 Pro is a professional device for high-speed face recognition. The terminal uses a deep learning algorithm and is highly reliable. Features: Built-in card reader (Mifare and Em-Marine cards) 1 s. View Biometric identification terminal Model Uface 7 Pro Case form factor (mount type) Wall-mounted Processor Dual-core ARM Cortex-A7 - 900MHz Memory 512MB RAM, 8GB ROM OS Linux Case material Metal Usage environment Indoor Screen diagonal, inches 7 Sensor presence Yes Screen resolution 600x1024 Operating temperature -10℃~50℃ Humidity 10%~90% Protection class IP65 Power supply 12V/2A Power consumption (full load), W 15 Size, mm 232x122x38 Device weight 0.84 kg Package weight 1.6 kg

Meets the most recent UL 1484 standard, built-in the high sensitivity, the high stability and the high gas selectivity's characteristic may precise detect the LPG/ LNG. With the advanced high tech microprocessor and the wisdom control, processing the precise computation of the LPG /LNG concentration and through time, and have much intelligent control.   Item No. LK-680N Gas Alarm 1.         Meets the most recent UL 1484 standard 2.         Built-in the high tech gas sensor, i t has the high sensitivity, the high stability, and the high gas selectivity’s characteristic, may precise detect the LPG/ LNG. 3.         With the advanced high tech microprocessor and the wisdom control, processing the precise computation of the LPG/ LNG concentration and through time, and have much intelligent control. 4.         Built-in the high efficiency wide-range Switching Power Supply, suitable to the universal voltage.

2-colors alternate lightng, green & red colors.  Long life LED lights emitting 360 degree with no blind angle.  Make with PC cover which can average light source and ABS bass.   Item No. LK-800 1.         2-colors alternate lightng, green & red colors. 2.         Long life LED lights emitting 360 degree with no blind angle 3.         Make with PC cover which can average light source and ABS base.

Low current consumption, alarm output 110dB.  Wall mount type , flush mount and ceiling mount type are available.  White color, blur and red color for your choices.  Also provide tamper switch type for preventing intruders taking away the alarm siren.   Piezo Siren With Strobe LK-95 Three Cables Type Item No. LK-95 1.         Siren & Strobe or Strobe only. 3 cables style 2.         Operating Voltage: 3.         10~16V (DC12V model) 4.         18~28V (DC24V model) 5.         Operating frequency: 2.4~3.7 KHz 6.         Alarm output: 110 dB 7.         Strobe: 8 pcs super bright LED strobe 8.         Reverse polarity protection 9.         Color available: Red / Blue / White 10.     Size: 122L x 73W x 43H mm 11.     Weight: 140 g

Digital Loop Detector with two output relays. Four selectable loop frequencies (20~80KHz)  to eliminating crosstalk. No warm-up required. Two color LED status indicators.   Item No. LK-109 1.         Digital Loop Detector with two output relays 2.         Four selectable loop frequencies (20~80KHz) to eliminating crosstalk. 3.         No warm-up required 4.         Two color LED status indicators 5.         Motorcycles detection also very good application

Security guard, when it is triggered, using alarm output dry contact, it will call to pre-set 8 numbers for alarming calls. Two kinds of items can be offered. One is with 1 trigger, 1 voice message. The other one is with 2 triggers, 2 voice messages.   Item No. LK-100S1. 1.         One Trigger, One Voice message 2.         Store up to 8 telephone numbers 3.         Battery free computerized chip records voice message(s), each 20 seconds maximum, and phone numbers each 25 digits maximum. 4.         With Panic Button for emergency help 5.         Intrusions recorded and reported on LCD 6.         With alarm output dry contact   Specifications: Power Input: DC11 ~ 17V - Power consumption: Standby - 35mA, Operation - 80mA - Alarm Inputs: NO (Normal Open) or NC (Normal Close) - Number of Phone Number: 8 (landlines or cellphones) - Time of Voice Message(s): 20 seconds maximum - Single alarm input, single voice message - Alarm Output Method: dry contacts - Dimensions: 210W x 125H x 34D mm

Stand-alone single door control. Used as a card/PIN reader for unlocking the door oras switch for arming or disarming the security system. Memory retained permanently even after power failure. Reader type: Lockout, Card only, Card plus PIN, Card or PIN. With Doorbell push button.   Item No. LK-1030 / (EM)   1.         Stand-alone single door control 2.         Used as a card/PIN reader for unlocking 3.         Memory retained permanently even after power failure 4.         Adding cards, deleting cards, checking card validity operated through keypad 5.         With numeric LED display makes operation user-friendly 6.         Reader type: 7.         Lockout, Card Only, Card plus Pin or Pin only. 8.         With a door-bell push button   Specifications: - Read range: 15 ~ 23cm (Thick & ISO card), 10~15cm (key tag) - Cardholder capacity: 8,000 cards - Frequency: 125 KHz - Power supply: DC11~15V (liner and full wave rectification power) - Power consumption: 70mA (stand-by), 150mA (operation) - Unlock duration: 1~255 seconds - Case dimensions: 85W x 125H x 22D mm   Proximity Card & Key Tag 1.         Uniquely encoded, impossible to be duplicated 2.         Hand free, battery free 3.         Card dimensions: 4.         Thick card: 86 x 54 x 1.8 mm 5.         ISO card : 86 x 54 x 0.8 mm 6.         Key tag : 34 x 39 x 6 mm

Contemporary design fits modern houses.  A single chip watchdog microprocessor monitoring circuit, ensures easy operation stable performance, reliable quality and long operational life.  Each burglary zone can be set monitored or bypassed independently.   Item No. LK-3006MD series 1.         Keypad operated type 2.         Contemporary design fits all modern houses 3.         A single chip "watchdog" Microprocessor monitoring circuit, ensures easy operation stable performance, reliable quality and long operation life. 4.         Each burglary zone can be set monitored or bypassed independently 5.         With Panic Button for emergency help 6.         With LAN alarm output   Specifications: 1.     Protection zones:   One 24-hours panic zone (N.O. loop)   One 24-hours fire zone (N.O.loop)   One door chime zone (N.O. loop)   Two burglary zones (N.C. loop) - LK-3006MDL2   Four burglary zones (N.C. loop) - LK-3006MDL1 2.  Each burglary zone can be set monitored or bypassed indpendently 3.  With LAN alarm output 4.  Built-in transformer 20VA 5.  Dimension: 160W x 222L x 60D

New Round Shape Sensor Ideal for protection of showcases and show windows and fixed glass windows and glass doors in offices, industrial building, etc.  No need additional power source. Detects a specific frequency or vabration of breaking glass and insensible against vibrations and shocks by wind, cars, railways etc..  Requires no adjustment for sensitivity.   Item No. LK-4105C 1.         No need power source 2.         Detects the specific frequency or vibration of breaking glass. 3.         Insensible against vibrations and shocks by wind, cars, railways, etc. 4.         Requires mp adjustment for sensitivity. 5.         Housed in a water-resistant case.   This New Round Shape Sensor is to be promoted from Jan. 1st, 2020.

Item No. LK-152N Contact Rating: 0.2A 30VDC Contact capacity: 5W Operating Distance: 25 mm (cc) Housing material: ABS resin Brown, Gray & Ivory colors available City Wall Enterprise, 100% Taiwan base, established in 1983, is a leading professional manufacturer with kinds of Security Alarm products, especially in Infrared Beam Sensors, Alarm Control Systems, Auto Dialer, Digital Keypad, etc.  

Strip type sensors, Dual Beams, Twin Beam, Reflector type, and mini size infrared beam sensors are all available.  Easy installation, Stable quality guarantted.  Long life using.  Waterproof items with IP66 can be installed outdoor, detection range up to 250m   Item No : LK-20HM2 / LK-20HM4 1.         Strip Sensors 2 beams & 4 beams 2.         20m detection range (66ft) 3.         Compact & slim type 35mm 4.         Waterproof IP66 construction 5.         LED alignment indicator 6.         No synchronizing wire required 7.         Install in windows, doorways, skylights, garage, gates & spaces are limited. 8.         Swivel body unit, easy for beam alignment 9.         Auto response time adjustment