Chemicals in bulk on Qoovee
Sort by:
LLC ALTERKHIM-PRO
Russia
USD
2.83/pcs
Purpose: Anti-mildew is used to treat wood, concrete, brick and other surfaces with an absorbent capacity in order to prevent and destroy microorganisms (mold, fungus, algae, blue) in residential premises and in places with high humidity (bathrooms, basements, cellars , hotbeds, etc.). Recommended to be added to chalk and cement mortars, as well as to water-based paints. It can be added to unmodified plaster, masonry mortars, putty as a biocidal additive instead of mixing water. The tool perfectly sanitizes the surfaces of walls, brickwork, ceilings, interpanel seams. Has a long-lasting effect.
Benefits:
long-term protection;
preventive protection against microorganisms (mold, fungus)
excellent adhesion
good weather resistance
simple processing
does not exfoliate
allows coating with water-based paints.
Mode of application:
Apply the product with a brush, roller, spray 2-3 times after each previous layer has dried. When treating an already affected surface, apply the agent, after 24 hours clean the surface and repeat the treatment. When processing mineral surfaces directly exposed to water, cover it after drying with a water repellent GKZH-11 or waterproof paints and varnishes. Average consumption 100-150 g / sq. m on mineral grounds and 200-300 gr./sq. m for wood. When used as a biocidal additive in mortar mixtures, test with a small amount for compatibility.
Water-borne paint: add 250 ml of paint to 20 liters of paint and mix thoroughly.
Additive to plaster: 250 ml of the product is enough for 10 liters of water. Grout or plaster is mixed on the resulting solution.
Grout: 50 ml is added to the mixing water per 5 kg of dry mass.
Additive to wallpaper glue: add about 25-30 ml of active agent per 1 liter of water to the glue mixing liquid, then prepare the glue according to the instructions.
Precautions: When working, use protective equipment for skin, eyes and respiratory organs (rubber gloves, overalls, glasses, respirator). In case of contact with skin, mucous membranes, eyes, rinse immediately with plenty of running water for 10-15 minutes. Seek medical attention if necessary.
Danger: Possible irritant effect on the skin.
Storage and transportation: Transport and store at temperatures from + 5 ° C to + 40 ° C, in a hermetically sealed original container, separately from food, in a cool ventilated room, out of the reach of children and animals. Avoid heating and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPin 2.1.7.1322-03
Shelf life: 36 months
Composition: an aqueous solution of active target antiseptic components
Manufactured in accordance with TU 20.20.14-004-24851300-2019
LLC ALTERKHIM-PRO
Russia
USD
3.05/pcs
Purpose: Designed for long-term protection of wood from mold, blue stain, wood-destroying and wood-coloring fungi, decay and wood-boring insects in conditions of moderate exposure to atmospheric precipitation and condensate moisture, as well as inside residential, public and agricultural premises. The term of protection in the absence of direct washout or subject to additional protection with film-forming paints and varnishes is up to 25 years. In case of intense exposure to adverse factors, periodic re-treatment is recommended.
Scope: It is used in the processing of new and previously treated with antiseptics wooden planed, sawn or log elements and structures, such as: walls, cladding, facades, terraces, cattle corrals, rigid roof elements, joists, rafters, fences, windows, doors, decorative parts, pallets, etc.
Benefits:
long-term protection up to 25 years;
effectively protects against biological damage and insects;
environmentally friendly, does not contain solvents;
can serve as an independent coating, or as an antiseptic impregnation for painting;
does not damage or stain the treated surfaces.
Surface Preparation:
Clean wood from dirt, dust, old paintwork, etc. If the wood surface is blue or moldy, it is recommended to first remove it with wood bleach.
Application Instructions:
Carry out works at a temperature not lower than + 5 ° С. Stir the antiseptic before use. Apply with a brush, roller, spray in 2-3 doses at intervals of 20-30 minutes, ensuring the required total consumption. The treated wood must be dried for at least 24 hours, protected from water and precipitation. The maximum protection period is obtained when processed by immersion, soaking or autoclaving. Soaking or impregnation in an autoclave is carried out until the specified flow rate is reached. Do not handle frozen wood! It is recommended to periodically check the integrity of the treated surface, if mechanical damage is found, re-treat it.
Consumption:
for planed wood - 200-400 g / m²;
for sawn wood - 250-500 g / m², depending on the surface quality.
Precautions: When working, use protective equipment for skin, eyes and respiratory organs (rubber gloves, overalls, glasses, respirator). In case of contact with skin, mucous membranes, eyes, rinse immediately with plenty of running water for 10-15 minutes. Seek medical attention if necessary.
Danger: Possible irritant effect on the skin.
Storage and transportation: Transport and store at temperatures from + 5 ° C to + 40 ° C, in a hermetically sealed original container, separately from food, in a cool ventilated room, out of the reach of children and animals. Avoid heating and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPin 2.1.7.1322-03
Shelf life: 24 months
Composition: an aqueous solution of active target antiseptic components
LLC ALTERKHIM-PRO
Russia
USD
13.41 - 14.78/pcs
Disinfectant for surfaces APRIL is a multicomponent universal product of the Alterkhim-Pro company, designed for deep complex disinfection of surfaces of various areas.
Description: Ready-to-use solution in the form of a transparent liquid, color characteristic of the dye used (transparent, light green, light blue), the smell of isopropyl alcohol and the used perfume.
Composition: isopropyl alcohol (70.0 ± 5%), alkyldimethylbenzylammonium chloride (0.25 ± 0.02%), polyhexamethylene guanidine hydrochloride (0.1 ± 0.02) - as active ingredients, as well as a perfume. pH - 5.5-6.5.
Purpose: Treatment of surfaces of all types of premises, equipment, devices, appliances, interior items and furniture, auxiliary sanitary and technical aids intended for patient care, rubber carpets for feet, textile products - underwear and bed linen (reusable and disposable character). Application in all types of air conditioning systems - air conditioners with wall, duct, indoor units, zone and multi-zone, split and multi-split systems. Processing of products (instruments) intended for dental, medical and surgical intervention (including optical endoscopes with a robust body). It can be used for preliminary sterilization cleaning of instruments. Processing of metal surgical instruments and dental handpieces (including rotating elements), cleaned in special baths / installations using ultrasonic exposure. Processing of fiber optic equipment (endoscopes), taking into account the TLD.
Antimicrobial Activity: In water, the PHMG-GC solution effectively suppresses various types of microorganisms: gram-positive and gram-negative bacteria (including mycobacterium tuberculosis), viruses, various kinds of fungi, yeast, molds, algae, and retains high efficiency in the range of ambient temperatures from 0-30 ° C and at pH 6-9. According to its physical properties, April is very easy to use - it is a substance readily soluble in water, stable and safe during storage, colorless and odorless.
The product has a prolonged antimicrobial effect for 4 hours and is safe for humans and animals.
Expiration date: if stored in unopened manufacturer's packaging is 5 years from the date of manufacture.
LLC ALTERKHIM-PRO
Russia
USD
32.7 - 36.42/pcs
In contrast to chlorine and ozone, means "Aprilia-Bas" is not an oxidizing agent, its mechanism of action of the biocide on different microorganisms. The product has disinfecting properties: it is also used to clarify water and prevent the appearance of algae. A good flocculant, removes suspended metals, mechanical impurities, has coagulant properties. Possesses antimicrobial activity against bacteria, fungi and viruses. Keeps its properties for a long time during storage, allows you to protect the pool water for a much longer period than "volatile" oxidants. Safe to use. Chlorine free Coagulates suspended metals Good flocculant Safe to drain into soil Kills fungus and bacteria Safe for people Description: The "April-BAS" liquid concentrate is a clear liquid from colorless to light brown. Slight precipitation is allowed during storage. Composition: Prepared water, a complex of active substances for coagulation and water disinfection. When cleaning and disinfecting the water of swimming pools, fountains and artificial reservoirs (hereinafter referred to as the processed object), it is necessary to take into account the features associated with the operation of these objects. Efficiency directly depends on the quality of the filtration and circulation systems, as well as on the quality of water treatment activities. Shelf life: In unopened manufacturer's packaging is 3 years. The product retains its properties when frozen and thawed.
LLC ALTERKHIM-PRO
Russia
USD
8.72 - 10.05/pcs
In contrast to chlorine and ozone, means "Aprilia-Bas" is not an oxidizing agent, its mechanism of action of the biocide on different microorganisms. The product has disinfecting properties: it is also used to clarify water and prevent the appearance of algae. A good flocculant, removes suspended metals, mechanical impurities, has coagulant properties. Possesses antimicrobial activity against bacteria, fungi and viruses. Keeps its properties for a long time during storage, allows you to protect the pool water for a much longer period than "volatile" oxidants. Safe to use. Chlorine free Coagulates suspended metals Good flocculant Safe to drain into soil Kills fungus and bacteria Safe for people Description: The "April-BAS" liquid concentrate is a clear liquid from colorless to light brown. Slight precipitation is allowed during storage. Composition: Prepared water, a complex of active substances for coagulation and water disinfection. When cleaning and disinfecting the water of swimming pools, fountains and artificial reservoirs (hereinafter referred to as the processed object), it is necessary to take into account the features associated with the operation of these objects. Efficiency directly depends on the quality of the filtration and circulation systems, as well as on the quality of water treatment activities. Shelf life: In unopened manufacturer's packaging is 3 years. The product retains its properties when frozen and thawed.
Kuantum Corp.
Taiwan
USD
300.0/pcs
KUALIMATE ACS 60
Purity: 60%
Chemical Name: Ammonium Cumene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer.
Form at 25℃: liquid
Packing: 225kgs drum or 1150 kgs tote
Kuantum Corp.
Taiwan
USD
300.0/pcs
KUALIMATE AXS 40
Purity: 40%
Chemical Name: Ammonium Xylene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer.
Form at 25℃: liquid
Packing: 225kgs drum or 1150 kgs tote
Kuantum Corp.
Taiwan
USD
300.0/pcs
KUALIMATE STS 40
Purity: 40%
Chemical Name: Sodium Toluene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.
Form at 25℃: liquid
Packing: 225kgs drum or 1150 kgs tote
KUALIMATE STS 90
Purity: 90%
Chemical Name: Sodium Toluene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.
Form at 25℃: solid, powder
Packing: 25kgs bag
Kuantum Corp.
Taiwan
USD
300.0/pcs
KUALIMATE SCS 40
Purity: 40%
Chemical Name: Sodium Cumene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.
Form at 25℃: liquid
Packing: 225kgs drum or 1150 kgs tote
KUALIMATE SCS 93
Purity: 93%
Chemical Name: Sodium Cumene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.
Form at 25℃: solid, powder
Packing: 25kgs bag
Kuantum Corp.
Taiwan
USD
300.0/pcs
KUALIMATE SXS 40
Purity: 40%
Chemical Name: Sodium Xylene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, the anti-caking agent in powdered detergent.
Form at 25℃: liquid
Packing: 225kgs drum or 1150 kgs tote
KUALIMATE SXS 93
Purity: 93%
Chemical Name: Sodium Xylene Sulfonate
Product Application: Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, the anti-caking agent in powdered detergent.
Form at 25℃: solid,powder
Packing: 25 or 30 kgs bag
ООО "ЛеоБерто"
Russia
Specify the price
ООО "ЛеоБерто"
Russia
Specify the price
ООО "ЛеоБерто"
Russia
Specify the price
ООО "ЛеоБерто"
Russia
Specify the price
ООО НПП "Альфа"
Россия, Russia
Specify the price
APPLICATION OF PERHYDROL In the textile industry, perhydrol, which you can buy from us, is used to bleach fabrics. In the pulp and paper industry it is used to produce light paper. In rocket science it is used as an oxidizing agent for rocket fuel. In the chemical and construction industries, it is used for foaming, which is necessary in the production of porous materials. In industry, perhydrol, whose price is not very high, is used as a hydrogenating agent and catalyst. Used in medicine as an antiseptic. For the pool, it is mainly used for disinfecting water. It has a reducing and oxidizing property, slows down the flowering of water in the pool. Perhydrol (hydrogen peroxide) technical is a colorless transparent and viscous liquid with a distinct “metallic” flavor. The chemical formula is H 2 O 2 . Hydrogen peroxide is completely soluble in alcohol, ether and water. Hydrogen peroxide is a strong oxidizing agent that reacts with many chemicals. Its concentrated solutions can be explosive, so if you want to buy perhydrol in St. Petersburg or another city, it is better to entrust its delivery to professionals.
ООО «Легран»
Russia
USD
201.63 - 299.72/Ton
ООО «Легран»
Russia
USD
381.46/Ton
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
75-28-5
Molecular weight
58.12
Boiling point 101.3Pa(°C)
-11.7
Freezing point 101.3Pa(°C)
-
Density30°C(kg/m)
2210
Critical temperature(°C)
134.71
Critical pressure(MPa)
3.64
ODP
0
GWP
1000
Quality Index
purity
≥99.9%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
1)Refrigerant(Replace R12 ; 2)Projectile Agent;3)Cleaning Agent;4)Acrylic Pain
Packing
Non-refillable cylinder:6.5kg(14.3LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
75-10-5/345-33-6/811-97-2
Molecular weight
86.2
Boiling point 101.3Pa(°C)
-43.8
Freezing point 101.3Pa(°C)
-
Specific Heat of Liquid, 30°C, [KJ/(kg•°C)]
1.51
Critical temperature(°C)
87.3
Critical pressure(MPa)
4.63
ODP
0
GWP
1700
Quality Index
purity
≥99.90%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
As the long-term substitute for R22 ,R407C used mainly in the conditioners and refrigeranting systems .
Packing
Non-refillable cylinder:11.3kg(25LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
75-10-5/345-33-6/811-97-2
Molecular weight
86.2
Boiling point 101.3Pa(°C)
-43.8
Freezing point 101.3Pa(°C)
-
Specific Heat of Liquid, 30°C, [KJ/(kg•°C)]
1.51
Critical temperature(°C)
87.3
Critical pressure(MPa)
4.63
ODP
0
GWP
1700
Quality Index
purity
≥99.90%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
As the long-term substitute for R22 ,R407C used mainly in the conditioners and refrigeranting systems .
Packing
Non-refillable cylinder:11.3kg(25LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
354-33-6 /420-46-2
Molecular weight
98.86
Boiling point 101.3Pa(°C)
-47.10
Freezing point 101.3Pa(°C)
-
Density30°C(kg/m)
1021.90
Critical temperature(°C)
70.90
Critical pressure(MPa)
3.79
ODP
0
GWP
3900
Quality Index
purity
≥99.9%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
As the long-term substitute for R502 ,R507 used mainly in the low temperature refrigeranting systems .
Packing
Non-refillable cylinder:11.3kg(25LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
420-46-2/354-33-6/811-97-2
Molecular weight
97.60
Boiling point 101.3Pa(°C)
-46.60
Freezing point 101.3Pa(°C)
-
Density30°C(kg/m)
1017.20
Critical temperature(°C)
72.10
Critical pressure(MPa)
3.74
ODP
0
GWP
3800
Quality Index
purity
≥99.8%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
As long-term substitute for R22 and R502,R404A is used in refrigeranting systems of low & moderate temperature.
Packing
Non-refillable cylinder:10.9kg(24LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
CAS No.:
75-10-5/345-33-6
Molecular weight
72.58
Boiling point 101.3Pa(°C)
-51.53
Freezing point 101.3Pa(°C)
-
Density30°C(kg/m)
1038
Critical temperature(°C)
72.50
Critical pressure(MPa)
4.96
ODP
0
GWP
2000
Quality Index
purity
≥99.90%
Water content
≤0.001%
Acidity
≤0.00001%
Evaporation residue
≤0.01%
Chloride content
≤0.0001%
Appearance
Colorless and clear
Odor
Odorless
Application
As the long-term substitute for R22 ,R410a used mainly in the conditioners and refrigeranting systems .
Packing
Non-refillable cylinder:11.3kg(25LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
Molecular formula
CHCLF2
Molecular weight
86.47
Boiling point 101.3Pa(°C)
-40.8
Freezing point 101.3Pa(°C)
-160.0
Density30°C(kg/m3)
1174.2
Critical temperature(°C)
96.2
Critical pressure(MPa)
4.99
ODP
0.034
GWP
1700
Quality Index
purity
≥99.90%
Water content
≤0.001%
Acidity
≤0.0001%
Evaporation residue
≤0.01%
Chloride content
–
Appearance
Colorless and clear
Odor
Odorless
Application
Chlorodifluoromethane(HCFC-22), a colorless gas at room temperature, is a colorless, non-toxic, nonflammable and transparent liquid under the pressure created by itself. It has excellent thermal and chemical stabilities and no corrosively to metals. Its main applications include refrigerant (-80° C grade), raw materials for PTEE production and intermediate for Halon 1211 production. It is also a blowing agent for extruded polystyrene and polyurethane foams
Packing
Non-refillable cylinder:13.6kg(30LB),22.7kg(50LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
Zhejiang Penglai Refrigerant Co.,Ltd.
Hangzhou City, China
Specify the price
фреон хладагент
Molecular formula
CH2FCF3
Molecular weight
102.03
Boiling point 101.3Pa(°C)
-26.10
Freezing point 101.3Pa(°C)
-96.60
Density30°C(kg/m3)
1188.10
Critical temperature(°C)
101.10
Critical pressure(MPa)
4.06
ODP
0
GWP
1300
Quality Index
purity
≥99.90%
Water content
≤0.001%
Acidity
≤0.0001%
Evaporation residue
≤0.01%
Chloride content
–
Appearance
Colorless and clear
Odor
Odorless
Application
HFC-134a is used as refrigerant in automobile air-conditioning,household and commercial refrigerant applications.It can also be used as aerosol,flame retardan, and blowing agent in pharmaceutical,agro-chemical,cosmetics and cleaning sectors.
Packing
Non-refillable cylinder:13.6kg(30LB),22.7kg(50LB) Refillable cylinder:400L,800L,926L,1000L ISO-TANK
artafazora
Ташкент, Uzbekistan
Specify the price
The organization accepts orders for the delivery of technical salt in Moscow and the Moscow region. Delivery in volumes of 20m3, 25m3, 34m3 We also deliver building materials to construction sites: 1 In Moscow and the Moscow region: Sand, sand salt, crushed stone, screening, expanded clay, cold asphalt, peat soil, coal 2 In Russia: Granite, gravel, limestone crushed stone of all demanded fractions. Delivery by railway transport. 3 In the south of the Moscow region. Limestone crushed stone 20/40, 40/70. Cost - 1350 rubles / m3 with delivery (October 2018) 4 Self-call. Quarry sand. Cost 250 rubles / m3 To calculate the total cost of the order, please indicate the information: Name of the required material Volume of material Requirements for the material (fraction, strength grade, group) Possibility (or lack of possibility) of round-the-clock acceptance of cargo Possibility of travel for tonars (large-capacity vehicles) Payment form ( cash, bank transfer) Terms (or day) of delivery Delivery address Customer's email Customer's phone number We invite you to contact us by email.
Merit Kimyo Invest
Ташкент, Uzbekistan
Specify the price
Copper sulfate is used for other compounds, in medicine, food industry, in the production of mineral paints, in agriculture as an antiseptic, fungicide and fertilizer.
Merit Kimyo Invest
Ташкент, Uzbekistan
Specify the price
Soda Ash 99.4% of grades "A" and "B" in p/p bags of 45 kg., production of Uzbekistan.
There is a possibility of export (in large volumes) to the CIS and foreign countries.
We will be glad to cooperate.
Омский завод ПРОМБЫТХИМ
Омск, Russia
USD
1.09/kg
Техническое моющее средство для обезжиривания металла перед покраской
Технические моющие средства (ТМС) " Неолайт-204", предназначены для обезжиривания и промывки изделий и поверхностей из металлов, полимерных материалов, стекла от от остатков мазута, нефтепродуктов, индустриальных масел, СОЖ и других загрязнений в различных технологических процессах, в т.ч. перед окраской масляными, нитро- красками и эмалями, перед нанесением гальванических, полимерных и других покрытий, а также для мытья внешней поверхности вагонов ж\д транспорта машинным и ручным способами.
ТМС представляют собой сбалансированную смесь поверхностно-активных веществ (ПАВ) и органического растворителя.
Отсутствие в рецептуре высокощелочных компонентов и других едких веществ исключает вредное воздействие ТМС надетали из резины и пластических масс и окрашенные поверхности.
Деэмульгирующие свойства ТМС ускоряют процесс отделения масло-жировых загрязнений, что позволяет использовать моющие растворы в многооборотном режиме без специальной регенерации.
Замена порошкообразных щелочных средств (кальцинированная сода, тринатрийфосфат и т.п.) позволяет снизить температуру моющего раствора в 2-3 раза. По своей эффективности 2% водный раствор ТМС серии "Неолайт" сопоставим с тем же объемом органического растворителя, а порой и более эффективен. При этом стоимость данного раствора, составит 1,5 руб\кг, что значительно дешевле стоимости органических растворителей (ацетон, уайт-спирит, сольвент и т.п.).
ТМС применяются при температуре рабочего раствораот +5 до +50 град.С, при этом максимальный моющий эффект достигается при температурах от +30 до +50 град. С. Не рекомендуется использование рабочих растворов с температурой выше +60 град.С.
Оптимальные концентрации и параметры мойки (температура и время) подбираютсяиндивидуально в зависимости от степени, характера загрязнений и условий мойки
ТМС и приготовленные рабочие растворы, относятся к малотоксичным (4 класса) химическим продуктам, взрыво- и пожаробезопасны. При работе с концентратом и рабочими растворами специальных мер безопасности не требуется.
Омский завод ПРОМБЫТХИМ
Омск, Russia
USD
1.53/kg
Обезжиривание металлов перед покраской с одновременным созданием фосфатного слоя.
Полное описание
Преимущества Неолайт-306
Удаляет с металлических поверхностей масляные загрязнения, прокатную и кузнечную окалину, преобразует ржавчину в фосфатную пленку готовую для покраски.
Защищает (обеспечивает антикоррозионную защиту) и протравливает металлические поверхности перед окраской. Между обработкой и окраской остается достаточно времени (препятствует окислению обработанных поверхностей).
Шлифует металлические поверхности перед покраской без применения других химикатов и обеспечивает хорошее схватывание краски.
Удаляет отложения ржавчины при увеличении времени растворения.
Применение:
Средство применяется для очистки стальных, чугунных, и других металлических поверхностей. Детали погружаются в раствор технического моющего средства с разбавлением водой от 1:2 до 1:10 на от 1-5 минут. Время обработки увеличивается при сильной загрязненности маслами, смазками и уменьшается при подогреве до 40-50 0С.
Для удаления отложений ржавчины и окалины детали погружаются в раствор технического моющего средства с разбавлением водой 1:2 на 20-40 минут.
Если детали нельзя погрузить в раствор, то обработку можно провести, нанеся раствор на деталь валиком, кистью, обтиранием или распылением.
Детали промывают водой под струей или в емкости, а затем высушивают
Омский завод ПРОМБЫТХИМ
Омск, Russia
USD
1.31/kg
Очистка поверхности теплообменного оборудования от железо-окисных и минеральных отложений.
Средства серии " Неолайт-305 " предназначены для очистки, мытья кислотостойких поверхностей и удаления с них накипей различного химического состава, минеральных, известковых, грязе-солевых, белково-жировых отложений и загрязнений, а также следы ржавчины, цвета побежалости после сварки. Возможно использование средства для обезжиривания изделий из черных металлов с одновременным созданием защитного фосфатного слоя.
«Неолайт-305» представляет собой сбалансированную композицию поверхностно-активного вещества и активной кислотной основы РН= 1,5-2,5.
«Неолайт-305» применяется для обработки технологического оборудования, тары, емкостей, трубопроводов в различных отраслях промышленности
«Неолайт-305» применяется при ручных, машинных и циркуляционных промывках. При необходимости применяется замачивание промываемых поверхностей в рабочем водном растворе. В случае особо сложных загрязнений возможно применение непосредственно концентрата “Неолайт-305 ”. Рекомендуемая температура рабочего раствора 10-60 град.
Омский завод ПРОМБЫТХИМ
Омск, Russia
USD
1.04/m2
Защита свариваемых изделий от налипания брызг расплавленного металла и сварочных горелок от нагаров и шлаков. Не содержит силикона и масел.
Средство техническое жидкое (СТЖ) ”Индусвар” применяется для защиты свариваемых изделий от налипания брызг расплавленного металла и сварочных горелок от нагаров и шлаков. СТЖ представляет собой водный раствор смеси поверхностно-активных веществ и пленкообразующих добавок.
СТЖ отличается высоким защитным эффектом, не снижает прочность сварного шва, и не ухудшают адгезию и декоративный вид наносимого лакокрасочного покрытия.
Применение СТЖ ”Индусвар” сокращает время на проведение сварных работ и снижает их стоимость. Так при зачистке металла от налипших брызг с помощью углошлифовальной машины расходуется от 1 до 4 зачистных кругов на 1 м.п. сварного шва, что составляет в среднем 50 руб./м.п. При использовании СТЖ ”Индусвар” затраты составят 1 рубль (10-15 гр/м.п.).
СТЖ ”Индусвар” - пожаро- и взрывобезопасное вещество. По степени воздействия на организм человека относится к 4 классу опасности (вещества малоопасные). При непродолжительном контакте не вызывает раздражение кожных покровов персонала.
СТЖ не подвержено органическому разложению при хранении в производственных условиях. СТЖ замерзают, после размораживания и тщательного перемешивания сохраняют свои свойства.
Срок годности средств – 12 месяцев.
Условия хранения и транспортировки от -40 до +40 град.С.
Best Choice Ukraine
Киев, Ukraine
USD
5.64/pcs
Concrete dye pigment Hormusend HLV-21 is used in concrete solution to add color.
Materials:
garden paths;
paving slabs;
blind areas around the house;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.
Best Choice Ukraine
Киев, Ukraine
USD
3.5/m2
Black concrete pigment Hormusend HLV-21 is used in concrete solution to give color.
The pigment can be colored:
garden paths;
paving slabs;
blind areas around the house;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.
Best Choice Ukraine
Киев, Ukraine
USD
3.5/m2
Concrete dye pigment orange Hormusend HLV-21 is used in concrete mortar to add color.
Materials:
putty;
paving slabs;
screeds;
plaster;
garden paths;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.
Best Choice Ukraine
Киев, Ukraine
USD
3.9/pcs
Concrete dye pigment Hormusend HLV-21 blue is used in concrete mortar to add color.
Materials:
garden paths;
paving slabs;
blind areas around the house;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.
Best Choice Ukraine
Киев, Ukraine
USD
0.04/pcs
Concrete dye pigment brown Hormusend HLV-21 is used in concrete mortar to add color.
Materials:
putty;
paving slabs;
screeds;
plaster;
garden paths;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement.
A 2 kg package is sufficient for an area of 5-15 m2.
Best Choice Ukraine
Киев, Ukraine
USD
3.5/pcs
Concrete dye pigment yellow Hormusend HLV-21 is used in concrete mortar to add color.
Materials:
putty;
paving slabs;
screeds;
plaster;
garden paths;
concrete products.
Benefits:
does not dissolve in water;
does not fade;
Consumption: from 300 - 500 g per 25 kg of cement. A 2 kg package is sufficient for an area of 5-15 m2.
The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Chemicals from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.