Construction equipment in bulk on Qoovee

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The mobile concrete batching plant Sumab K-40 is intended to produce high-quality concrete and concrete mixes. Exact performance of plant capacity depends on type and mark of produced concrete and on used aggregates, cement and quantity of chemical additives. Batching plant is mounted on a container frame and can be transported on a 40 foot open top container.4 aggregate storages, mixer 1500/1000 liters. Additive pump, high pressure compressor. Computer Siemens (100 concrete sorts). Batching plant equipped with comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.Optionally can be delivered: cement silo, cement screw, belt conveyer of supply ready-mixed concrete from the mixer. If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you! We are ready to invite you to see our existing concrete plants, which were manufactured in 1980-s. They are still in the ranks!Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced on Scandinavian technology, using components from leading European manufacturers! Scandinavian quality at the best price!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   Fully automatic batching plant. The plant is designed on a container frame. 4 aggregate storages, turbine type mixer 1200/800 liters. Water tank 250 l. Automatic control of a plant: Computer Siemens (100 concrete recipes). Control room container 2,5 x 2,5 x 2,95m. Swedish quality. Good price. Mobile concrete plant is equipped with a comfortable cabin and system of automatic control of the plant. Modern computer system Siemens enables to produce 100 recipes and sorts of concrete. You can print each mixture of ready batch in kilograms and percent, that prevents the theft of cement or aggregates in the preparation of a concrete mix.

Wall surface sander: Rated voltage (V): 220 Rated frequency (Hz): 50 Sandpaper diameter (mm): 225 Rated power (w): 1050 Rated speed (r / min): 600-2600 Poppy. grinding height (m): 3.3 Net (kg): 4.5

Pedestal Plastic

Rope slings 2sk - lifting devices designed for rigging. ... A two-branch sling is made of steel cables, to the ends of which hooks, links, staples are attached. Consists of two cable (rope) branches connected together. Manufacturing plant Stalprom (Russian Federation)

Power (W): 350 Voltage \ Frequency (V \ Hz): 220 \ 50 Idle speed (rpm): 0-350 / 0-950 Drilling capacity in wood: 10 Drilling capacity in metal: 6 Chuck diameter (mm): 10 Torque adjustment (N \ m): + Reverse mode: + Speed regulation: - Weight (Kg): 1.5

Power (W): 350 Voltage \ Frequency (V \ Hz): 230 \ 50 Idle speed (rpm): 0-750 Drilling capacity in wood: 10 Drilling capacity in metal: 6 Chuck diameter (mm): 10 Torque adjustment (N \ m): + Reverse mode: + Speed regulation: - Weight (Kg): 1.6

Power (W): 320 Voltage \ Frequency (V \ Hz): 220 \ 50 Idle speed (rpm): 0-750 Drilling capacity in wood: 10 Drilling capacity in metal: 6 Chuck diameter (mm): 10 Torque adjustment (N \ m): + Reverse mode: + Speed regulation: + Weight (Kg): 1.5

Power (W): 280 Voltage / Frequency (V / Hz): 220/50 Idle speed (rpm): 0-750 Drilling hole diameter in wood: 10 Drilling hole diameter in metal: 6 Parton diameter (mm): 10 Torque adjustment: + Reverse mode: + Speed regulation: + Weight (Kg): 1.5

Product name Fill for Liangchi cooling tower Product material PVC / modified CPVC Regular sizeHeight * Length (radial drawing) 800mm*750mm1000mm*750mm1200mm*750mm400mm*1220mm Sheet thickness 0.28mm~0.45mm Corrugation height 19mm Color Black/Green Operating temperature -20℃~68℃

portable electric belt sander for sale. Sanding belt 4 x 24 inch (100 x 610mm), abrasive band speed 500 rpm, motor power 1.6kW, power supply 220V 7Amp. Electric belt sander has a sanding belt with high toughness, high strength and wear resistance.

SIXTY82 Arc Roof Stage roof arch - size 6x4 Options: • Multifunctional temporary roof system • The structure is made on the basis of standard trusses • Does not have obstructing wind guards on the sides • Affordable cost with a ratio: price and quality • High load despite the size • Easy manual installation • Structurally calculated and proven concept • All-aluminum construction • Many options for setting scenes and other designs • Conforms to European safety standards for temporary structures Roof 6 mx 4 m * Distributed load ** 2100 kg. Own total weight 610 kg. Internal dimensions for stage 6 x 4 m Trusses of the SIXTY82 M29S / M29T structure Main parameters * Front console load capacity 2 x 250 kg Maximum speed of wind gusts during operation +/- 18 m / s Max. idle wind speed +/- 27 m / s Maximum speed of wind gusts during installation 10 m / s Ballast Required: Depends on structure configuration Dimensions of the structure: shown in the drawings of each structure Roof tarpaulin: standard: gray or black; Optional: transparent or other colors Stage podium: several options are possible, e.g. modular stages SIXTY82 or Layher Event Structural calculations: Safety certificate Eurocode - EN 13814 Additional Information: • Tarpaulins are suitable for Keder profile • No need for cable ties on the sides • Constructions lateral "wings" - optional • Technical documentation - on request * All data is based on a calculated setting. Other options are possible, but they need to be investigated on a case-by-case basis. Wind calculations based on Vb0 = 28 m / s, consider your terrain category III ** The load capacities are indicative and depend on the loads used. All SIXTY82 products are manufactured in the Netherlands. The given price and characteristics of the goods are for informational purposes only and are not a public offer. You just need to call us to agree on the details of the order, and we will organize the whole process from its formation and delivery. When ordering, you receive professional modern products directly from the manufacturer's warehouse, as well as a one-year manufacturer's warranty. The cost of the order is indicated on the condition of pickup from the manufacturer's warehouse. When delivered directly from Europe, you get products much cheaper than those on the local market. JSA Europe is the official sales partner of SIXTY82 products in Ukraine. # sixty82 #JSAEurope # stage equipment sales # aluminum trusses # stage complex # buy stage

Crane air conditioners of the KK series with air-cooled condenser are designed to create a comfortable air temperature in the cabins of bridge electric, gantry cranes, and other industrial premises, ensuring the maintenance of the required temperature. The temperature control range is from + 12 ° С to + 30 ° С with an accuracy of ± 0.5 ° С, at an ambient temperature from -25 ° С to + 65 ° С on ozone-safe freon R-134a, and up to + 80 ° С on R-142 freon or ozone-safe freon. R-227 Used in coke, ferroalloy and metallurgical industries. Air conditioners are equipped with hermetic or semi-hermetic compressors of the world's leading manufacturers - Copeland, BOCK, and fans - EBM Papst, ZIEHL-ABEGG made in Germany. Air conditioning is controlled by a control panel, which includes a programmable controller. Air conditioners work from sources of alternating current 380V and direct current 220V. Additionally, air conditioners are equipped with an air heater.

If your organization is engaged in high-rise monolithic housing construction, external platforms will be an indispensable tool for your object. We are ready to provide you with any volume of the given cargo receiving equipment, in the stipulated time. Permanent platforms K-1.3 with metal flooring are mass production, therefore they are almost always available at the warehouse, with large volumes of deliveries, the equipment is ready for shipment from 3 to 5 working days. Remote platforms are delivered in full set. Remote platform K 1.3 with metal flooring is used in the construction of high-rise monolithic residential and industrial facilities. The portable platform is mounted in prem floor ceiling on the floor where it is necessary to receive cargo, it can be various construction and finishing materials, tubs with cement mortars, equipment and tools. Supply of cargo to the working surface of the portable platform is carried out by means of a tower crane. After the cargo is delivered to the site, workers can enter it. The portable platform is fastened with the help of special telescopic spacer racks, which are necessarily included in the kit of the supplied equipment, their number is 4 pieces. Fastening is carried out floor - ceiling, the length of standard telescopic racks is 2-3, 5 meters, if your building has high ceilings, then by request we will ensure the supply of fasteners with a greater height of extension. Specifications Loading capacity, kg 2500 Working platform, m 2.5x.2.2m Overall dimensions, m 4,8x2,3x1,4 Gross weight, kg 1000 Metal flooring

If your organization is engaged in high-rise monolithic housing construction, external platforms will be an indispensable tool for your object. We are ready to provide you with any volume of this cargo-receiving equipment, on time. The K-1.4 pickup sites are mass production, so they are almost always in stock, with large volumes of deliveries, the equipment is ready for shipment from 3 to 5 working days. Portable platforms are delivered in a full complete set. The portable platform K-1.4 is used in the construction of high-rise monolithic residential and industrial facilities. The portable platform is mounted in prem floor ceiling on the floor where it is necessary to receive cargo, it can be various construction and finishing materials, tubs with cement mortars, equipment and tools. Supply of cargo to the working surface of the portable platform is carried out by means of a tower crane. After the cargo is delivered to the site, workers can enter it. The portable platform is fastened with the help of special telescopic spacer racks, which are necessarily included in the kit of the supplied equipment, their number is 4 pieces. Fastening is carried out floor - ceiling, the length of standard telescopic racks is 2-3, 5 meters, if your building has high ceilings, then by request we will provide delivery of fasteners with a greater height of extension. When delivering remote platforms you get all the technical information: passport and certificate. Specifications Loading capacity, kg 2500 Working platform, m 2,5х2,2 Overall dimensions, m 4,65x2,3x1,4 Gross weight, kg 1000 Wood flooring

Pioneer Construction Crane g / n 500 kg with a swing arm from the company Tekhnikstroy is profitable! We will ensure the delivery of the Pioneer 500 crane in the necessary configuration directly to your building site. Operational delivery within 5-7 days after payment. Cranes of mass production and almost always available in stock. Delivery is carried out by a transport company to any region of our country. We offer good discounts and offer you a reasonable price for a Pioneer 500 crane with a swing arm. You are always in touch with a personal specialist who will provide you with all information support during the delivery of equipment. All the technical and accounting documentation for the crane you receive during the transfer of equipment. We are focused on long-term and mutually beneficial cooperation. Specifications Loading capacity, kg 500 Height of rise / lowering, m 50 when installed on the ground, m 4,5 Lifting speed, m / min 16.8 Drive power, kW 4 Overall dimensions, m 4.2 x 1.7 x 5.4 Total weight, kg 1345 Boom reach, m 2.5

You need a service lift? You can order a service lift suitable for multiple movements of small loads and in various fields of activity. We offer a wide range of service lifts for commercial and non-commercial structures. Regardless of whether you are looking for a lift for efficient transportation of food between the kitchen and the dining room in a restaurant, or looking for an installation in your private home, our proven service can guarantee that your needs will always be fully met. Small service freight lifts also matter in many other environments that may not immediately come to mind. For example, they can be used to transport goods in a store, move office supplies between office floors, or move records in a medical center or hospital. Because of their flexibility, service elevators, as a rule, are of great help to any business environment. Our reliable micro-lifters have long been used in many establishments throughout Russia and in the countries of the Customs Union, so you can always be sure that you will receive equipment and service of the highest quality. quality. For more information, please contact us.

If a lot of cars constantly accumulate at your warehouse terminal and they stand idle in the queue for unloading and reloading cargo, your tired porters with boxes in their arms are exhausted, and forwarding drivers are already asleep. It's time to think about the profitability of the warehouse terminal. A re-equipment of an outdated farm is necessary in order to increase the productivity of all processes and automate them as much as possible. Our production is ready to solve all the problems of unloading and transporting goods at your warehouse terminal or production warehouse and we offer individual production of cargo lifts for a warehouse at an affordable price. lifting and lowering loads in warehouses when loading / unloading cargo vehicles and during the movement of goods inside the warehouse A. Application options: Ensuring the shipment of goods to customers Ensuring the unloading of vehicles and moving goods to the basement or upper floors. Inside the warehouse movement of goods in multi-level warehouses. Installation options: On the facade of the building. Inside the building. Fastening to the supporting walls. p 10 tons Small-sized freight elevators with a loading capacity of 500 kg Console lifts from / p to 2 000 kg Two-masted from / p to 5 00 0 kg Mine elevators with / p 5000 kg Specifications scissor capacity up to 10 000 kg mine load capacity up to 5000 kg mast lifting capacity up to 2000 kg lifting height according to the specification the size of the cargo platform for TK

Single-mast lifts to order for any objects! We always take into account your wishes and are ready to make the production of single-mast lifts of any configuration, taking into account the characteristics of the installation site. This task with all its responsibility. Your goal is to get reliable equipment to perform production tasks. Our job is to provide the optimal solution as quickly and accurately as possible. What kind of lifts we offer: Affordable and reliable For lifting loads, they are easy to install both outside and inside buildings With a lifting capacity of up to 2000kg and the size of the platform you ask, based on your needsEquipment installation services on your turnkey facility. We appreciate your time! You can always contact the employee assigned to you to resolve any issues at any time convenient for you. What are the advantages of a single-mast lift? Security! Compliance with all existing standards; Saving! In comparison with other types of lifts, the single-mast significantly lower price; Convenient installation! The mast of the lift is attached to the ceiling or to the wall of the building with brackets; Convenient loading and unloading! These operations can be performed from three sides; Specifications loading capacity from 200 to 2000 kg lifting height from 3 to 150 meters cargo platform for TK

Two-mast cargo lifts are manufactured according to the TOR to calculate the cost and production time, the form of technical requirements is filled in, where you need to fill in the parameters: load capacity, lifting height, dimensions of the loading platform, the presence of hinged boards, the way of opening doors, the number of fixed stops, what drive is needed. Lifts were delivered across the country from the western regions to Vladivostok. An invaluable experience has been accumulated in this field of activity, the installation teams also know every millimeter of this equipment and are ready to cope with any fairly heavy object. We accept applications for two-masted cargo hoists and are ready to ensure timely and high-quality manufacturing and delivery. In the TZ it is necessary to note all the options that you want to see in the lift, and also to note all the wishes to the smallest detail, since in the end you will get exactly what you need. The double-masted lifts are made in the period from 15 to 30 working days, all dates are fixed in supply contract. The lifting capacity of the two-masted lift can be from 500 to 3000 kg, the height of the lifted load from 3 to 80 meters. After production, you will receive a passport and a certificate for a lifting mechanism. The main points during the filling are the lifting height of the loading platform, the load capacity, the place of installation of the lift (street or inside the building). The cargo platform can have folding sides of the height you need, a door. Specifications Load capacity, kg from 500 to 3000 Height of rise, m to 80 Lifting speed, m / s 0.16

We are ready to execute any option of a mine hoist to order! The most important thing you have is to install a mine load mechanism on your industrial facility, warehouse or construction site. If you contacted us, you will receive exactly the equipment you need and which will be reliably perform its functions. We will fulfill any of your technical requirements to the full. Also, do not forget, we will take care of the careful delivery of equipment to you at the facility and carry out installation and commissioning. We only ask you to carefully fill out the online questionnaire and mark all that interest you. technical points of your future lift. If the technical department specialists have additional questions, we will contact you to clarify them. In general, the calculation of the cost of equipment takes several hours and you will receive a profitable commercial offer on the day you submit your application. What is included in the mine hoist: Cargo mine hoist with a load capacity from 250 to 5000 kg; The lift can be made in two versions: a metal shaft (performed by us) or the lift is placed in the finished mine. Everything depends on your conditions; The dimensions of the cargo compartment are any that you need, except for the option to the finished mine; The cargo cabin is a checkpoint or not a checkpoint, as well as your conditions; The cabin of the lift is equipped with: rolling shutters, sliding bars, swing doors, side walls; Placing an order with us, what do you get Specifications load capacity up to 5000 kg lifting height up to 30 meters execution 1 lift mine execution 2 self-supporting metal shaft

We are ready to work on the manufacture, delivery and installation of hydraulic scissor lift tables. Any scissor lift tables for your objects outside and inside the building! If you have a complex object and you cannot install a mast cargo hoist, we are ready to solve this issue and offer the optimal solution: installation scissor lift, which is a universal equipment and can lift any cargo. What scissors lifting tables we offer: Small single-scissors with a lifting height of 0.5 to 2.5 m and c zopodemnostyu from 200 kg up to 20 tons; With a large lifting height of up to 20 meters and a lifting capacity from 500 kg to 5 tons, the number of scissor systems is from two to six; Dual scissor tables for lifting heavy vehicles and equipment, load capacity from 1000 kg to 20 tons; All orders are individual. We are attentive to our work and are ready to fulfill any of your wishes regarding the execution and assembly of lifting mechanisms. In order to properly assess the situation at the facility and for correct calculation, the basic parameters of the future scissor lift are required: installation location (outside or inside the building); loading capacity which is required; How high should the load be; necessary dimensions of the cargo platform (length, width, whether fences are needed); the need to install fences, railings, folding legs Specifications lifting capacity up to 20 tons lifting height up to 12 meters the size of the loading platform according to your specification

We offer delivery and installation: PMG cargo mast lift with a lifting capacity of 2000 kg. This is a new development of the PMG range of freight lifts. Our company is ready on favorable terms to offer you production, supply and installation of a PMG cargo mast lift with a lifting capacity of 2000 kg. The PMG-1-04 lift, with a lifting height of 3 to 100 meters carriage, with a hoist reinforced mast attachments to the building are supplied, an enlarged rope drum, a hoist is installed on the cargo carriage, features of a mast hoist 2000 kg: Cargo carriage dimensions 2.0 * 1.5 * 1.0; The diameter of the cargo rope is 12 mm (as in the SGP 1000 kg); Powerful starters with current up to 63A; On the cargo platform installed polyspast; Increased cargo drum for winding cargo cable; The strengthened fastenings of the elevator to the building. We always go towards building and assembly organizations and we listen to your wishes. You can order the delivery and installation of a cargo hoist with a lifting capacity of 2000 kg, this lift will increase the productivity of lifting cargo to 2000 kg, a large loading platform will allow you to freely place on it pallets with bricks and other cargo. In the development of the lift, all measures for safe operation and operation of lifting mechanisms are observed. If you want to purchase a lift and order installation, also for all other questions, please contact our contact information specialists below. Specifications Lifting height, m ​​3-100 Loading capacity, kg 2000 Lifting speed, m / s (m / min) 0.3 (15) Weight, kg 7200 Diameter of the rope, mm 12 electric motor power, kW 11.0 (AIR132M4U1) Sizes of a cargo platform, m 2,0х1,5х1.0 Mast section, mm 802x670 Overall dimensions of the base, m 3.75х2.3х2.42 m. / 1400 kg

For lifting construction cargo: pallets with bricks and buckets with mortars, a PMG cargo mast lift was developed with a lifting capacity of 1000 kg, the maximum possible lifting height is up to 100 meters. The minimum lifting height of 3 meters. Cargo lifts are serial products and are almost always available in stock. The period of readiness for shipment of lifts is 5 days from the receipt of payment for the equipment. Delivery of freight elevators is carried out to any region of the country. PMG cargo elevators of 1000 kg are assembled by the installation team to the required working height from the mast sections, 2 meters long. Fastening of the lift to the building is made by fasteners - clamps. There are three types of fasteners in the arsenal: for fastening with a tie-rod, to the wall of a building, for a window opening or to a balcony. The cargo platform of the lift of / p 1000kg, is equipped with special outriggers for the possibility of people leaving for unloading. The production produces two types of SGP 1000kg lifts: with a stationary cargo carriage and a cargo carriage with a withdrawable tray. To calculate the cost of the equipment, please fill out the form TZ Specifications Lifting height, m ​​3-100 Loading capacity, kg 1000 Lifting speed, m / s (m / min) 0.3 (15) Section length, m 2,0 Weight 6650 Diameter of the rope, mm 12 Rated power of the electric motor, kW 11 Sizes of a cargo platform, m 1,5х1,2х1.0 Mast section, mm 802x670 Overall dimensions, m 3,3x1,8x2,1

The PMG - 500 mast hoist, this is a construction cargo hoist, is used for vertical supply of the necessary cargo to the floors of an object under construction, is fed by a withdrawable cargo platform into the floor openings of the building, and cargo is also supplied to the roof. The PMG 500 mast hoist: Load carrying carriage - roll-out roller platform; Mast lift team from separate sections; Base - support frame; Traction drive hoist - winch; On the last mast - cap with rollers; Cargo rope and power cable; ZIP-box with fasteners (bolts, engraver, washers, control panel) The PMG 500 elevator has security systems installed: emergency automatic brake; Fixed upper and lower limit switch; blocking system for rolling out the loading platform When receiving a construction hoist, you get a passport for lifting a hand-painted mechanism, where all the technical parameters are indicated, there is an insert for operating the hoist, a certificate of conformity from the manufacturer, we note that SGP cargo mast hoists are not subject to registration with the supervisory authorities The PMG 500 mast cargo hoist is manufactured according to GOST 29168 91 as well as in accordance with the technical specifications TU 4835 033 03215451 00 rules PB 10 518 02 Specifications Height of rise, m 100 meters Load capacity, kg 500 kg Lifting speed, m / s (m / min) 0.3 (15) 0.3 (15) Sizes of a cargo platform, m 0,5х2,7 Power El. Engine, kW 4.0 Overall dimensions, m 2,5х1х2,1

Our company is ready to provide delivery, rental and installation of mast lifts ПМГ-1-05, with a carrying capacity of 750 kg. Sale and delivery to you on the object of new lifts SGP 750; Installation and dismantle of the elevator on your object; Rent of the PMG 750 lift; Sale of used lifts PMG 750 kg; Supply of components and spare parts for SGP 750; Sale of lifts to any region of our country. Lifted mast SGP 750 kg comes fully loaded, lifting height from 3 to 100 meters, loading platform size 0.8 * 3.2 meters, pull-out platform for delivering cargo into the building through the opening, shear 1.7 meters horizontally. PMG 750 cargo mast hoist components: The base of the lift is a support frame with a size of 2820 x 1400 mm; The first installation section of the mast on the frame with a height of 2120 mm; Cargo platform with rollers and sliding platform 0.8 * 3.2 m; Drive - electric winch with electric motor; Mount the lift for overlapping or to the wall of the building; Cap for the upper section of the mast; Cargo cable to the required height and electrical cable cargo platform; The SPTA box with fasteners for mounting the elevator. The advantage of this elevator is that it is designed for lifting not only piece goods, it is very convenient to use for lifting long sheet materials: plywood, double glazing, drywall, sawn timber. Specifications Height of rise, m from 3 to 100 Loading capacity, kg 750 Lifting speed, m / s (m / min) 0.3 (15) Diameter of the cargo rope, mm 12 Power El. Engine, kW 7.5 AIR132S4U1 Sizes of a cargo platform, m 0,8х3,2 Operating temperature range, ° C from -40 to +40

Production of mast lifts with increased carrying capacity up to 1500kg. Rental and installation of construction lifts of the PMG 1500 kgAt the moment, our company Tekhnikstroy is ready to offer on favorable terms the production, delivery and installation of the mast cargo lifts of the PGG 1500kg. , 0 * 1,5m; Diameter of a cargo cable 14mm; High-power starters with current up to 63A; To increase the security, an additional limit switch is installed; The cargo drum for winding a cargo cable of a larger diameter has been changed. Wishes from construction organizations have been fulfilled, now you get a lift with a lifting capacity of 1500 kg, which makes it easier to lift large pallets with bricks, the extended and widened cargo carriage allows you to place this load on it freely. Measures for safe operation and operation of the lifting mechanism are observed. For an order, as well as for all questions, you can contact our specialists at any time convenient for you. Specifications Lifting height, m ​​3-100 Load capacity kg 1500 Lifting speed, m / s (m / min) 0.3 (15) Weight, kg 7000 The diameter of the rope, mm 14 electric motor power, kW 15 Sizes of a cargo platform, m 2,0х1,5 Overall dimensions, m 3.75x2.3x2.42 m

The stationary vibropress SUMAB R-300 effectively produces the following concrete products: hollow blocks, insulating blocks, paving stones, curbs and others. Technical data: Maximum product height: 330mm Minimum product height: 40mm Face Mix Machine Weight: Mold: 2000kg Installed power: 9 kW Main concrete hopper capacity: 600 l Maximum production area: 750x500 mm Production capacity 8h / 100%: Hollow block: 3450 pieces (20x20x40 cm) Paving stones: 270-300 m2 (10x20x6 cm) Scandinavian quality and good prices! Sumab is the foundation of your success!

Компактный передвижной бетонный завод SUMAB MINI. Производительность 5-9 м3 /ч 2 склада инертных 1 м3 каждый Пан миксер 500/300 литров. Емкость для воды 200 литров. Автоматическое управление заводом: компьютер (20 бетонных квитанций). Мини завод, который идеально подходит для небольших строительных компаний или предпринимателей, которые хотят начать бизнес по производству бетона! Бетонные заводы SUMAB являются гарантией качества, долговечности и надежности. Заводы производится по скандинавской технологии, используя компоненты ведущих европейских производителей! Скандинавское качество по лучшей цене! Если вам нужна дополнительная информация, вы можете посетить наш веб-сайт или отправить запрос. Мы обязательно найдем для вас лучшее решение!

Production capacity 8h / 100%: Hollow block: 6 912 pieces (20x20x40 cm) Paving stones: 550-640 m2 (10x20x6 cm) Scandinavian quality and attractive price! Scandinavian & UK Machines provide a full range of services in the mobile and stationary plant market; equipment for the production of blocks, paving slabs, curbs and wall panels; Cold asphalt plants; Supply of equipment for unloading cement - consultations, design, installation, training of specialists, service, supply of spare parts!

SUMAB concrete mixing plant is designed on a container frame Productivity 45-60 m3 per hour. 4 inert warehouses Pan mixer 1800/1200 liters Siemens computer (100 concrete grades). Easy to move from site to site The plant is ready to produce concrete in just 3 HOURS after installation on the jobsite! Ideal for medium to large scale projects! We offer Scandinavian quality and good price!

Cable jack DK-5V screw is a mobile lifting mechanism designed for lifting cable drums when laying cable. The cable jack can also be used as a pay-off device when rewinding the cable. The cable jack DK- 5V allows the use of standard sizes of drums from 8 to 22 numbers. The lifting capacity of the screw jack is 5 tons. Completion of the jack for unwinding cable drums DK-5V: two racks; axis; movable shoes NAME OF PARAMETER VALUE Maximum lifting capacity, kg, not more 5000 Lifting principle screw pair Maximum standard size of cable reel 22 Minimum cable reel size 8 The presence of hold-down shoes + Diameter of the supplied axle, mm 48 Length of the supplied axle, mm 1700 Cable jack weight, kg one hundred Overall dimensions, mm 1440х715х1400

Cable winding device UNK-4-2N mod.2 is a hand-operated winding machine, light class, designed for winding and measuring cables with a maximum diameter of 20 or 30 mm, depending on the modification. The winding device UNK-4-2N mod.2 is designed for cable rewinding from coil to coil weighing not more than 30 kg. To facilitate the removal of the coil, the cable winding device is equipped with a convenient folding handle (in the BASIC version). Technological control of the length is carried out with an IDM-20 or IDM-30 meter, the meters are implemented on an ID-2 electronic counter. The delivery set of the UNK-4-2N cable rewind device mod.2 includes: frame, take-up drum, giving drum, length meter, electronic counter ID-2. The winding device UNK-4-2N mod.2 is produced in two modifications: BASIC PACKAGE - special price RUB 13,200 with VAT rotating folding handle on the take-up drum, certified length gauge IDM, reverse counter ID-2 with sound indication upon reaching the programmed length. LIGHT COMPLETE SET - special price RUB 12,000 with VAT non-certified IDM length meter, non-reversible counter ID-2, without sound indication. Cable winding machine UNK-4-2N mod. 2 patented (more) Measuring unit IDM is patented and has a certificate of type approval of measuring instruments (more) - for modification BASIC

Vibropress Monolit-100, a simple, inexpensive and reliable machine for the production of small-sized concrete products by the method of semi-dry vibrocompression, it is completed with parts and units from domestic agricultural machinery, which means that after the warranty service will not become a problem for the owner either in price or in time to find the necessary details. The molding zone of the machine, in contrast to many competitors in this class, is -1000 mm, this allows the vibropress to be made the most popular vibropressed product that is in great demand on the market - road curbs and sidewalk curbs 1 meter long. Also, the vibropress can make wall blocks 39x19x19 (cm) with two or four voids, a partition wall block 39x12x19 (cm), a small sidewalk border 50x5x20 (cm) and other concrete products at the request of the customer.

Manual loading of concrete mix. The width of the forming zone is 800 mm. The vibrating press is designed for the production of wall blocks with a size of 390x190x190 mm, two-hollow or four-hollow (depending on the type of installed punch-matrix elements), partition blocks with a size of 390x100x190 mm (in the presence of the required type of punch-matrix elements). The products are molded onto technological replaceable wooden pallets. The productivity of the vibrating press is 20-30 molding cycles per hour. The number of molded products per cycle: wall block - 4 pcs., Partition block - 5 pcs. The recommended number of serviced personnel is 2 workers. Unit size without oil station and concrete mixer: length 1500 mm, width 1700 mm, height 1950 mm. Installation weight 950 kg. Scope of delivery: vibropress, oil station, hydraulic pallet pusher for transferring the pallet with molded products onto removable multi-level racks. Shaping tooling punch-matrix "two-hollow wall block 4 blocks" is included in the delivery set. Form-forming elements punch-matrix "wall block with four hollow blocks 4 blocks", and "two-hollow partition wall block 5 blocks", concrete mixer, technological pallets are supplied for an additional fee. The installed electric power of the vibrating press is 7.5 kW, voltage is 380 V. size 1500x1700x1950 mm

The universal press of the new PN-2013 series is equally convenient for the manufacture of furniture facades, doors and door linings, as well as for specific tasks such as the production of triplex glass, molding products from ABS plastic, acrylic and artificial stone. There is a possibility of manufacturing radius facades. In the basic configuration, the press is equipped with an Italian oil rotary vane pump, a system for smooth triac starting of heaters, and disconnecting heaters in three zones.

СПЕЦИАЛЬНЫЕ СТАНКИ