Construction Materials in bulk on Qoovee

Repair and restoration plaster waterproofing material of penetrating action. For repair, restoration and waterproofing of old concrete and destroyed brickwork, as well as for leveling the surface. Purpose Kristallizol Repair: For the repair of concrete and brick destroyed structures in order to ensure water tightness, increase strength and frost resistance. Restoration and leveling of destroyed areas on concrete and brick, waterproofing plaster surface coating. Description Crystallisol Repair: Crystallisol Repair is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Repair: Waterproof under hydrostatic pressure W8. It is used for work on old, destroyed concrete and brick structures. Forms a waterproof armored layer. It is applied both from the inside and from the outside of the structure. Increases frost resistance and structural strength. Resistant to aggressive environments. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. Material consumption: 1.3 - 1.5 kg / m² with a layer thickness of 1 mm (depending on the surface condition). To achieve a waterproofing of 8 atmospheres, a layer of 10 mm is required. Packaging: 25 kg bag.

Non-shrinking joint waterproofing material of penetrating action. It is used to eliminate water filtration through abutment joints, cracks, chips of concrete and brick structures. Purpose Crystallisol Suture: For internal and external waterproofing of joints in underground and buried structures: horizontal and vertical joints of concrete and brick structures, seams of foundation blocks, brickwork, "cold joints", etc. Description Crystallisol Suture: Crystallisol Suture is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol Suture: Waterproof under hydrostatic pressure W8. It is used for work on both old and new concrete and brick structures. Resistant to aggressive environments. Non-shrinking, does not require additional maintenance. Increases the frost resistance of the structure. Environmentally friendly, non-toxic. Closed with tap water at room temperature. It is applied on a surface saturated with moisture. It is applied both from the inside and from the outside of the structure. Material consumption: 0.9 - 1 kg / lm (with a groove section of 20x20mm). Packaging: 25 kg bag, 15 kg bucket

Penetrating waterproofing material for work on new concrete surfaces in the absence of groundwater filtration at the time of work. Apply with a brush. Purpose of Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Description Crystallisol W12 Kistevoy: For internal and external waterproofing of concrete structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, pools, etc. It is applied to the surface in the absence of strong water filtration at the time of work. Not used for brickwork. Properties Crystallisol W12 Hand: Waterproof under hydrostatic pressure W12. It is used for work on new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a brush on a surface saturated with moisture. Material consumption: 0.8 - 1 kg / m² (depending on the condition of the surface). Packaging: 25 kg bag, 15 kg bucket.

Water-stopping waterproofing material of penetrating action. For work on concrete and brick surfaces with strong filtration of groundwater. Purpose of Crystallisol W12: For internal and external waterproofing of concrete, stone and brick structures in underground and buried structures operating under conditions of constant or variable exposure to the aquatic environment: foundations and basements located below the groundwater level, water reservoirs, hydraulic structures, overpasses, swimming pools etc. It is used as a repair compound in the restoration of damaged concrete surfaces or masonry. It is applied on concrete / brick surfaces even with strong water filtration. It can be used as a complex waterproofing additive in concrete at the stage of construction, at the rate of 5% by weight of cement. Description Crystallisol W12: Crystallisol W12 is a mixture of Portland cement, calibrated quartz sand and chemically active additives. Properties Crystallisol W12: Waterproof under hydrostatic pressure W12. It is used for work on both old and new concrete structures. Increases frost resistance. Resistant to aggressive environments. Environmentally friendly, non-toxic. It is applied both from the inside and from the outside of the structure. Closed with tap water at room temperature. It is applied with a spatula on a surface saturated with moisture. Material consumption: 2.5 - 3 kg / m² (depending on the surface condition). Packing: 25 kg bag, 15 kg bucket.

Polymer window sills.

Polypropylene plumbing fittings.

Polypropylene water pipes.

Polyethylene sewer fittings.

Polyethylene sewer pipes.

J.C.COMM safety glass is made from chemically hardened material. It complies with the 9H hardness standard, which avoids scratches, cracks, chips and other damage on the device screen. The oleophobic coating of the glass prevents rainbow streaks, smudges and fingerprints from appearing on it. The thickness of the protective coating is only 0.3mm. Thanks to this, it does not distort the picture on the display and does not reduce the sensitivity of the sensor. The kit also includes a film on the back of the phone, a wet and dry cloth

The platform is universal (White).Diameter 60-110 mm.

Universal platform 60-110 (black)

Hello, how are you? We are a natural Turkish marble decoration and decoration marble company. If you are interested, we will be happy to deal with you in the supply of natural Turkish marble

The valves are designed for automatic overlap (opening) of openings in building envelopes, for overlap (opening) of technological openings and openings in places where ventilation ducts pass through interfloor ceilings, walls, partitions, for overlap of openings in enclosing structures of supply and exhaust ducts of smoke, general exchange ventilation , local suction and air conditioning.

Axial fans of the VOK series are used in exhaust ventilation systems of industrial and public buildings, in emergency smoke ventilation systems as back-pressure fans. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³.

Radial fans of VRK.G type are used in exhaust ventilation systems of industrial and public buildings. General-exchange fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to plus 70 ˚С, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. VRK.G fans are also presented in corrosion-resistant and explosion-proof versions.

Radial fans of VR.80 -75 type are used in supply and exhaust ventilation systems of industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Also fans VR.80-75 are presented in explosion-proof and corrosion-resistant versions.

Radial smoke exhaust fans of VRD.80-75 type are designed to remove high-temperature smoke-air mixtures arising during a fire and simultaneously remove heat outside the serviced room. The fan is used in exhaust (emergency) ventilation systems of industrial, public, residential, administrative and other premises (except for categories A and B of explosion hazard according to NPB 105-03) to remove smoke-air mixtures formed during a fire with a temperature of up to +400 ° C or up to + 600 ° C for 120 minutes. It is possible to use fans in general ventilation systems of industrial, public, residential, administrative and other premises for moving air or other non-explosive, non-aggressive gas mixtures with temperatures up to + 70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities no more than 100 mg / m³, with reduced rotation frequency no more than 50%.

Rectangular duct fans (VKT) are used in supply and exhaust ventilation systems for industrial and public buildings. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Climatic modification of fans U2 in accordance with GOST 15150-69 (ambient temperature from -30 ° C to +40 ° C). In the place where the fans are installed, the root mean square value of the vibration velocity from external sources of vibration should not exceed 2 mm / s. The degree of protection provided by the sheath is IP44.

Fiberboard TSN 20 is used in the furniture and door industry, construction, decoration. The sheets are suitable for arranging heat-insulating and sound-insulating partitions. The advantages of fiberboard include high strength, durability, ease of processing, smooth, even surface. Sheets are easy to work with, even with no experience. Fiberboard TSN-20 - Sanded on both sides, E2.Thicknesses: 2.5mm, 2.8mm, 3mm, 3.2mm. Sheet format: 2140 × 1220, 2440 × 1220, 2620 × 1220, 2745 × 1220, 2750 × 1220, 3050 × 1220, 3060 × 1220, 2440 × 1830, 2440 × 2050, 2440 × 2070, 2440 × 1700, 2745 × 1700 , 2745 × 740. The truck fits about 9000 square meters. Price on request.

The advantages of the material include high strength, rigidity, uniformity, and ease of processing. Chipboard lends itself well to mechanical processing (sawing, planing, drilling, milling), easily glued and painted. It is used in construction, mechanical engineering, furniture manufacturing. We can offer you: Chipboard 2440x1830x16 mm Grade 1. Emission class E1 (the lowest content of free formaldehyde). Finishing degree: Sanded on both sides. The truck loading rate is 420 sheets. We are ready to consider proposals for export. Price on request.

Rima brand flexible cast iron slices Large capacity option (from 20 kW to 250 kW) Electronic ignition control High combustion performance with low flue emissions Use with natural gas and lpg Standard and electronic control panel options 2 years warranty

Rima brand local AlSi10Mg cast heat exchanger 107% yield value Wide heating capacity option (from 70 kW to 3250 kW) Determining the boiler capacity in accordance with the 1:7 flame modulation heat load 6 bar working pressure High seasonal efficiency, low emission values Siemens cascade control panel providing different zone controls 16 boiler cascade connection Compatibility with Open Therm and BUS communication systems Casting slices for ease of installation, use and maintenance low sound level

Forced Burner Boilers Rima brand flexible cast iron sections Wide heating capacity option (from 30 kW to 930 kW) High efficiency 3-pass design High combustion performance with low flue emissions Use with liquid and gas fuel burners Standard and electronic control panel options

Solid Fuel Boilers Rima brand flexible cast iron sections Wide capacity option (from 20 kW to 95 kW) Can be used with wood and coal Chimney flap and simple chimney draft control

acrylic facade paint

The manufacturer offers a modern wastewater treatment plant, which is designed for a house for 6 people. The Poplar 6 household wastewater treatment plant has several modifications, namely with gravity and forced drainage, as well as with an extended neck. Septic tank Topol 6 will be able to purify 98% of domestic wastewater in a house or cottage, where up to 6 people live. Installation of Poplar 6 takes 1 work shift, about 6-8 hours. Fast delivery of Topol 6 autonomous sewage stations throughout Russia.

They are mainly used for anti-filtration protection of concrete and brick structures in order to create a waterproofing layer on horizontal (including ceilings) and vertical surfaces. Ready-to-use does not require warming up. Contains cement and fiber filler.

Ready-to-use waterproofing mastic. Mastic is perfect for waterproofing foundations, basements, floor slabs

SALE OF SELF CUTTERS Good afternoon, FART-NSK LLC Novosibirsk we offer to view our assortment. Individual approach to each client !!! In our company LLC `` FART-NSK '' you will always find a huge assortment of fasteners. There are more than 2000 items of goods in constant availability in the warehouse. Highly qualified employees with extensive experience are always ready to solve your questions. We work with both wholesale and retail clients, and are always ready to place an order of any degree of complexity.

Travertine. Marble. Stones for construction. We are looking for partners, buyers, clients.

Article МС 2233. Mosaic made of tempered glass, chip size 48x48 / 23x23 mm., 0.54 m2 in a box. The mosaic is resistant to temperature changes, color-fast, suitable for laying both on walls and on the floor. Recommended for indoor use. .

Our factory produces several types of single-deck plastic pallets of different sizes and capacities.

We work from stock and on order, we have our own production and 2 offices in Southeast Asia, as well as a large warehouse in the Moscow region and an office in Moscow, complete set from 2 days.

The roofing screw consists of a turnkey hex head, a rubberized washer (EPDM), which prevents moisture penetration, and a self-drilling tip. The thread is rare or frequent, depending on the diameter of the self-tapping screw. The main application is fastening corrugated board to a wooden or metal crate.

The drywall-metal (GM) self-tapping screw has a frequent thread, a sharp tip and a countersunk head for a Phillips recess (PH2). It is used for fastening wooden structures and drywall to metal profiles, no more than 0.9 mm thick.

The dowel-nail for thermal insulation is a fastener, consisting of a dowel with a wide round head and a special nail, designed for attaching heat-insulating materials to dense solid substrates such as brick, concrete and stone. It is used for installation on walls especially exposed to adverse weather conditions. The dowel has a two-section wedging zone and a wide plastic clamping washer with a diameter of 60 mm, which provides easy installation and reliable fastening of the thermal insulation material to the supporting base. Dowel length - 100 mm. Diameter - 10 mm. The fixing of the dowel in the wall is done by driving in a metal spreader nail. The metal nail is recommended for dowel lengths of 140 mm or more, as well as for the installation of heavy structures.

A dowel-nail is a fastener, consisting of a dowel and a special nail, designed to attach objects to dense solid materials such as brick and concrete. The plastic dowel has a special hidden base. The dowel-nail is used to attach objects to materials such as concrete, foam concrete, brick, wood, stone, etc. The dowel diameter is 6 mm. Length - 40 mm.

Interior high-pressure paints on any surfaces, incl. for all types of wallpaper; moisture resistant; washable; snow-white. High-strength facade high-strength paints; textured. Elastic silicone-based paints, perfectly retains moisture, has excellent dirt-repellent properties, and hides cracks. Suitable for indoor and outdoor use, coating durability up to 15 years. Acrylic enamels for concrete, wood, metal, for heating radiators, as well as a deep penetration primer, concrete contact, grout for joints, We can tint on request.

New Uber light boxes available from the manufacturer. Complete with universal car mounts. Sending to other cities is possible (to the door or to the terminal of your city). Sale by wholesale and retail. & nbsp; If you have a question - call! Package Contents: High impact plastic box; Reflective taping; Universal, quick-release fasteners