Food & agro machinery, equipment in bulk on Qoovee

The SUB-0.8 snow blower is a mechanical tool that, complete with walk-behind tractors (Belarus, Agro and their analogues), is used for snow removal in various areas. The ejection range is determined by the engine speed of the walk-behind tractor and the tilt of the screen visor. Skids are fixed on both sides of the body, in its lower part, with the help of which they regulate the height of snow removal from the surface level and overcome obstacles.

The SUB 0.8 snow removal attachment for the MTZ and AGRO walk-behind tractor is used for snow removal in various small contour areas.

The SUB-0.6 snow blower is a mechanical tool complete with walk-behind tractors (NEVA, OKA and their analogues) and is used for snow removal in various low-contour areas. The snow blower is a prefabricated welded structure. The screw screw is the main working element. When the shaft rotates, the snow mass moves from the peripheral capture zones to the middle. The blades throw the snow mass into the neck, which directs it in the right direction. Changing the direction of snow throwing is done by turning the screen of the snow blower. The ejection range is determined by the engine speed of the walk-behind tractor (snow blower rotor speed) and the tilt of the screen visor. Skids are fixed on both sides of the body, in its lower part, with the help of which they regulate the height of snow removal from the surface level and overcome obstacles.

CUBER elevator storage storage is designed for storage of any goods in any industry and trade, it allows to significantly save the ground storage area due to the maximum use of space in height. Along with increasing the efficiency of warehouse processes, an elevator warehouse ensures safe and fast storage of goods in a clean and orderly manner, guarantees ergonomic and safe work. One of the main advantages of CUBER is that it can be used not only as an autonomous system, but also as an element of complex automation of production processes. Storage and selection of small goods Warehouse automation Warehousing and accounting.

Trading House "Kharkiv Pump Plant" offers a full range of high-quality consumables and spare parts for dosing plunger pumps ND, diaphragm dosing pumps NDR-2M, three-plunger pumps PT and T. We offer spare parts: worms, housings, sliders, fingers, rings, spacers, bushings as well as all types of seals and gaskets for the hydraulic part of pumps. There is also a wide selection of pump hydraulic cylinders and major repair components. All SPTA parts are made of high quality materials at the Kharkiv Pump Plant. Whatever pump you use - diaphragm dosing NDR-2M, dosing plunger ND, three-plunger PT and T, you will find all the necessary spare parts to keep them in working condition. Knowledge, experience and reliable equipment guarantee high productivity and reduce downtime.

AQ-HD single girder overhead crane is a European standard overhead crane designed and manufactured in line with FEM standards. European-style bridge cranes operate with frequency conversion, running more smoothly. Technical parameters of AQ-HD overhead cranes: Load capacity: 1-20t Span: 7.5-28.5m Lifting height: 6-18m Lifting speed: 0.8/5m/min Hoist running speed: 2-20m/min Crane running speed: 3-30m/min Work duty: A5 Custom designs available

Process Line Product Description As a professional food extrusion equipment manufacturer with more than 30 years of experience, we provide you with a turnkey solution, including the whole process design, building layout design, and building construction guidance. ✍ PROCESS FLOW DESIGN We have our own experienced manufacturing workflows, we can also design a workflow according to your requirements. ✍ BUILDING LAYOUT DESIGN Our engineers will prepare the layout drawing of the whole line according to your workshop, if the workshop is not uniform, we can also design the layout according to its shape and size.✍ BUILDING CONSTRUCTION GUIDE Our engineers will help you design and prepare the workshop building. ✍ Application pet food, chew food, pet treat. Capacity 500 kg / h or less 800 ~ 1200 kg / h 1500 ~ 2500 kg / h 2500 ~ 3500 kg / h 4500 ~ 6000 kg / h Flow Chart Engineers with more than 30 years of experience will design the production line layout plan for you. grinding→mixing→extrusion→drying→flavouring→cooling→packing Application Feeding various raw materials such as packing bags, tons, bulk materials for trucks, etc. Customized solutions provided Name Grinding system Cleaning and maintenance Large access door and hammer lock for fast cleaning and maintenance for coarse and fine grinding Feature Domestic/import Siemens motor optional, with imported high quality bearing. Name Extrusion system Materials Preconditioner: stainless steel Screw and screw segments: special alloy material PLC centralized control: Siemens and other international brands gelatinization, necessary for the processing of any raw material and product. In addition, the barrel is conditioned to give extra energy to the extrusion of materials. Name Drying system circulating flow design Turns most of the moist air into high-temperature dry air after dehumidification, reducing heat loss Stainless steel rack belt Use of stainless steel baffle strips on both sides to restrict material within reasonable limits Dryer door insulation layer Stability to high temperatures polyurethane foam with low thermal conductivity Name Coating system Application Full contact with the surface of the food, uniform atomization. The addition of quantity is controlled by computer, the measurement is more accurate. Model Drum coating and vacuum coating optional according to technical requirements. Name Cooling system Usage principle Countercurrent cooling principle Feature ✍Using air lock, large air intake area, strong cooling effect; ✍Swivel discharge mechanism, no residue; ✍Low power consumption and easy operation; ✍ After cooling, the temperature of finished products is not higher than room temperature +3℃～5℃ Name Packing System Summary Complete set of solutions, including automatic weighing, sealing, labeling and coding, packaging, palletizing, etc. Packaging molds of filling and packaging machine bags, semi-automatic packaging machines Main Features 1) Simple in-line type structure, easy to install and maintain. 2) Adopting advanced world famous brand components in pneumatic, electrical and working parts. 3) Double high pressure crank to control die opening and closing. 4) High automation and intelligent operation, no pollution 5) Adopt a linker to connect with the air conveyor, which can be directly integrated into the filling machine. Customer Factory Packing and Shipping

WALNUT Automatic Cake Filling Line is a compact and multi-functional cake production line with liquid, semi-liquid, heat-resistant filling and dry filling (bear, bunny, squirrel, hippo, fish, dog, crocodile, astronautics). This line consists of dosing groups (two hoppers with a stirrer and a dosing piston group. Baking takes place in copper molds. The molds automatically open - for loading, turn over - for uniform baking and close for further baking. One mold is baked from 5 to 12 seconds. Production from 700 to 6000 piece/hour of the finished product!

• The line is designed to automate the process of glazing confectionery products with chocolate icing at food industry enterprises. • The glazing machine allows applying glaze of various coating thicknesses. ), glaze diffuser with adjustment of the thickness of the glaze layer. • Glazing technology provides a uniform layer of glaze, a glossy look, as well as a long shelf life. pump and blower, creating an optimal air flow. • The tail roller is responsible for removing excess glaze from below and smoothing. (to remove excess glaze from below and simultaneously smooth down the bottom of the product). • When glazing, the product is covered with glaze completely (top and bottom) or partially (only the top or only the bottom). • When decorating, a pattern is applied to the top of the product, and the bottom is glazed completely, or only a drawing is applied to the top of the product. • Temperature setting, control and maintenance is provided by an electronic temperature controller using software. • To smoothly change the volume of glaze supplied for glazing, a frequency-controlled drive is used to control the speed of the mesh conveyor. • Glazing line can be completed; a tank for melting chocolate and a decorator. • The glazing conveyor is removable, which provides 100% access to the bath for a quick change of icing. The conveyor is equipped with a stainless steel mesh belt. steel with a width of 425 cm, a mesh tape shaker. • The productivity of the line when loading pre-melted glaze can reach 250 kg of finished products per hour. mesh) are easily controlled from the control panel. • All parts of the machine are made of AISI 304 stainless steel and food grade plastic.

The cooling conveyor is designed to automate the cooling process (glazed confectionery products) at food industry enterprises; • The latest development of the DITO group. Not large dimensions and large cooling capacity makes it possible to work at a higher speed and productivity up to 250 kg / h of a chilled product. • The conveyor is driven by an electric motor and a gearbox, a frequency converter and an Omron control panel are used to smoothly change the speed, the panel allows you to adjust the speed 1 unit. • Chilled air supply volume is regulated by remote control using a microprocessor (displaying the temperature in the chamber, the operating status of the unit, the causes of failures; setting the required temperature in the chamber, defrost parameters and other parameters of the condensing unit operation; • Desired temperature inside cooling chamber is achieved by recirculating cooled air; • Cooled products are conveyed to the finished product collection table. • Sectional cooling 2-3-4-zone conveyor with a thermal chamber is made of ASI 304 stainless steel, the length of each section is 2500 mm • The conveyor is equipped with a drive and tension station, a motor-reducer Motive. Blue or white UNI conveyor belt.• The control panel has an Omron frequency converter. START, STOP buttons and speed control button. Two digital controllers EVK 203 are installed, for refrigeration units with ventilated evaporators with defrost function. Temperature sensor PTC silicone.

Screw filler mod. Dos 40, designed for filling stuffing into products, dosing into molds, etc. The machine is completely made of food-grade aluminum and stainless steel. In this dispenser, an auger is installed under the hopper that pushes the mass through the hoses to the gun. The gun is equipped with a pneumatic valve for opening and closing the dosing nozzle. Thanks to the numerous nozzles that the dispenser can be equipped with, it is widely used in the confectionery industry - for filling confectionery products. .a) cheese massab) diced pieces of vegetables such as spinach, onion, potatoes, mushrooms. ! Specify availability, often in stock! DITOGROUP company

Only now 40% off!!! We would like to present you a Universal pelmeni molding machine, specially designed for work in small workshops for the production of a wide range of products: pelmeni, dumplings, ravioli, etc. with various fillings (meat, vegetable, cottage cheese), including frozen ones. This machine has three functions: dividing, forming and filling in one process. Product weight, output and dough/filling ratio are adjustable. The design of the machine is absolutely safe for continuous operation, with low noise. By easily changing the mold and setting the size of the product, you can quickly get a large range of products. Made in Taiwan. Available in a warehouse in Moscow! We provide the opportunity to come to us to test the dumpling machine. To fix the price, request a quotation.

Wheel Material PU Color Multicolor Brand Rabbit Size AS PER CUSTOMER REQUIREMENT Packaging Type Box Product type Load Wheels

Roller Diameter various, depends on customer requirement Roller Surface Polyurethane Roller Length 300-400 mm Brand Rabbit Color Red, Green, Yellow, White, Black, Blue Country of Origin Made in India

Brand Rabbit Material Rubber Usage/Application Industrial Shape customized Color Black Packaging Type Box Thickness customized Hardness 50 Shore A I Deal In New Only Country of Origin Made in India We have been manufacturing and exporting a variety of Rubber Seals.  

Material Silicone Shape O-shaped Color Multicolor Usage/Application Industrial Brand Rabbit Country of Origin Made in India

Type of Beading U type Extruded Vehicle Type Vibrating Screen machine Usage/Application For vibrating Screens Product Type Rubber Beading Brand Rabbit Material Rubber Is It Customised Customisation I Deal In New Only Country of Origin Made in India

Structure BELT CONVEYOR Type Of Conveyor Belt Rubber Belt Usage/Application Industrial Mode Of Service Offline Material NE/SBR BRAND RABBIT

Material Rubber Type Elevator Belts Usage/ Application industrial Color Black Length Customized Structure Belt Conveyor I Deal In New Only Brand Rabbit Country of Origin Made in India We are one of the leading manufacturers and suppliers of Elevator Belts, which are offered to our clients with minimum elongation characteristics. These products are available in various grades like IPM-24, HR, SHR and HOR among others. These products are primarily used for vertical applications.Features: Precise design Sturdy construction Suitable for high pressure  

Rubber Belts Brand rabbit Material rubber Type Roll Color Black Bottom Thickness customized Country of Origin Made in India

Section v Brand Rabbit Type Banded V Belt Usage/Application Mining industry As per client As per client requirement Country of Origin Made in India

Material Rubber Belt Width 600 - 1200 mm Belt Thickness 6 to 20 mm Tensile Strength 10 Mpa Application Area Power Stations, Underground Mining, Ship Loading and Unloading, Ship to Ship loading, mining Length Of Belt AS PER REQUIREMENT Brand RABBIT Country of Origin Made in India With smooth surface conveyor belts, the maximum conveying angle of inclination is approximately 20° depending on the material. Using chevron cleated belts makes steeper angles of inclinations up to 40° possible, which allows for a higher lift in lesser space.Chevron conveyor belts have rubber cleats that are integrally vulcanized with the top cover of the belt. These profiles are made with highly abrasion-resistant rubber types and are offered in softer compounds (45 to 50 Shore hardness) as also 60 shore materials. The profiles are shaped in such a manner that there is no need for special idlers and these can be run on conventional conveyors. The pitch between two cleats ensures a smooth ride over return idlers.  

MaterialRubberBelt Width500MM - 1200MMBelt Thickness8MM-12MMApplication AreaPAPER INDUSTRY , PACKAGING INDUSTRY, FERTILIZER INDUSTRYBrandRABBITCountry of OriginMade in India  

Material Rubber Belt Width 100-1500 mm Belt Thickness 5-25mm Tensile Strength M24 Features As per application Normal, Heat Resistant, Chemical Resistant, Flame Retardent Brand RABBIT Maximum Abrasion Loss 250mm3 Surface Finish Smooth Packaging Size Upto 100mtr roll Carcass Construction EP, EN Country of Origin Made in India We technically design manufacture, and supply Grade: N-17, M24, Heat Resistance, Oil Resistance, Fire Retardant Conveyor Belts to a large number of clienteles almost in all sectors. These belts are in huge demand for Bulk Conveying Materials, in Mining Sectors, Thermal Power Plants, Captive Power Plants, Paper Industries, Sugar Mills, Fish Feed & Cattle Feed Plants, Soybean draff, etc. Bulk Materials below 70° C can be easily conveyed on Grade: N-17 Belts. The Rubber Covers are toughened for best workmanship and long-duration performance. These belts are technically designed for General & Medium Duties and are confirmed to IS 1891 (Part – I) 1994 Latest.  

Brand Rabbit Color Multicolor Size customized Material Rubber Thickness customized Shape customized Country of Origin Made in India

  Interested in this product? Get Best Quote Cow Mats - Diamond

Type Rubber Pattern waves Color Black Thickness 28mm Size 4ft 8in x 7ft 10in Weight 11-12 Kgs Brand Rabbit Country of Origin Made in India

Type Rubber Pattern Hexa Color Black Thickness 28mm Size 4ft 8in x 7ft 10in Weight 11-12 Kgs Brand Rabbit Country of Origin Made in India Do you want to reduce medical expenses and increase milk production in dairy farms?    Mouldtech Cow Mats offer comfortable bedding to the dairy cows which increases milk production, reduces medical expenses, and more.   The comfort of cows is directly proportional to their productivity and profitability. Their comfort levels affect their health and well-being. Cows need to relax for at least 12 hours to increase milk production by improving blood circulation to the udder by 30%. Rubber Cow Mats are specifically designed to provide maximum comfort, relaxation, protection from injuries, hygiene, and more to cows and buffaloes thereby enhancing their productivity and profits. If the barn is not comfortable, cattle will spend lesser time resting which directly affects their milk production.    Top 7 Exclusive Benefits Of Mouldtech Cow Mats:   Designed with premium grade rubber and a microcellular blend of EVA which holds tiny air bubbles offering comfortable bedding    Non-slip surface reduces limb injury & medical costs   Reduces bacterial infections, Mastitis by maintaining hygiene through underneath fluid clearing channels    The anti-fatigue feature resists excessive rheumatism, relieve the symptoms of arthritis causing lameness in cows, reduce premature culling   Improves pregnancy productivity of dairy cows   Offers floor insulation, heat and moisture resistance   Enjoy 24 months of warranty, our proactive sales and logistics support   Have further queries? Get in touch with us!   Remember, a delay in your purchase decision is resulting in 30% LOSS each day! CALL NOW!  

Type Rubber Pattern Bubbles Color Black Thickness 28mm Size 4ft 8in x 7ft 10in Weight 11-12 Kgs Brand Rabbit Country of Origin Made in India

220V High Pressure Washer Car Washing Machine 1200W 55Bar Y

Refrigerated cabinet Capri 0.5 M with a metal door is quite capacious, but compact device. It can be installed in the back room of a store, warehouse, food industry. ambient temperature from +12 to +43 ° С, away from hot stoves. Suitable for storing meat, fish, dairy and any other food products. ) 0.48Electricity consumption per day (kW) 4.4Number of bottles in length 7Number of bottles in depth 8Capacity of bottles 0.5l (glass) 280Ambient temperature +12.+43Cooling type DynamicWay of defrosting natural. Heat supply Voltage 220Rated current, A 2.1Rated lamp power, W 2.4Dimensions without packaging (LxDxH) 595x710x2030Dimensions in the package (LxDxH) 625x740x2200Net, not more than kg 85Gross, not more than kg 105

Refrigerator Capri 1.12M is designed for short-term storage of food and drinks pre-cooled to the temperature of the refrigerated volume. The lower location of the compressor provides a more convenient layout of the refrigerating chamber. and ease of maintenance and operation. Temperature range 0…+7 C° Danfoss compressor Controller Carel, Evco, Danfoss day (kW) 6.4Number of bottles in length 14Number of bottles in depth 7Capacity of 0.5l bottles (glass) 490Ambient temperature +12.+43Cooling type DynamicWay of defrosting natural. Heat inletsVoltage 220Rated current, A 3.15Rated lamp power, W 4.8Dimensions without packaging (LxDxH) 1195x710x2030Dimensions in the package (LxDxH) 1225x740x2200Net, not more than kg 130Gross, not more than kg 150

Refrigerated cabinet Mariholodmash Capri 1.12 N is designed for cooling and short-term storage of perishable foods and drinks at public catering and trade establishments. The case is made of painted galvanized steel with polyurethane foam filling. Features: Schrader filling valve Automatic evaporation of melt water The tightness of the internal volume is ensured by an elastic door seal made of PVC and a magnetic insert inside the seal Forced ventilation maintains an even temperature regime, provides uniform and fast cooling DanfossController Carel, Evco, DanfossInternal volume, m3 1.12 Useful display volume (m) 1.05 Shelf area, including bottom area, m2 3.7 Shelf dimensions (length x depth), mm 540x549 Ambient temperature +12.+43 Cooling type Dynamic Method of defrosting . Heat inletsVoltage 220Rated current, A 3.15Rated lamp power, W 4.8Dimensions without packaging (LxDxH) 1195x710x2030Dimensions in the package (LxDxH) 1225x740x2200Net, not more than kg 145Gross, not more than kg 170

Refrigerator Capri 0.5N is designed for long-term storage of food products pre-frozen to the temperature of the refrigerated volume. The lower location of the compressor provides a more convenient layout of the refrigerating chamber. in maintenance and operation. Temperature range -18.-12 C°Danfoss compressorDanfoss controllerInternal volume, m3 0.5Useful display volume (m) 0.48Shelf area, including bottom area, m2 1.8Shelf dimensions (length x depth), mm 503x619Electricity consumption per day (kW) ) 9Ambient temperature +12.+43Cooling type DynamicMethod of defrosting heating elementVoltage 220Rated current, A 3.3Rated lamp power, W 2.4Dimensions without packaging (LxDxH) 635x730x2060Dimensions in the package (LxDxH) 670x760x2210Net, no more than kg 85

Refrigerated cabinet Capri 0.7SK is designed for short-term storage, demonstration and sale of food and drinks pre-cooled to the temperature of the refrigerated volume. lower shelves, which allows you to more profitably lay out the goods in terms of merchandising. Temperature regime 0 ... + 7 C ° Danfoss compressor Controller Carel, Evco, Danfoss Internal volume, m3 0.7 Useful volume, m3 0.68 5Shelf dimensions (length x depth), mm 703x619Electricity consumption per day (kW) 4.8Number of bottles in length 10Number of bottles in depth 8Capacity of 0.5l bottles (glass) 400Ambient temperature +12…+35Cooling type Dynamic Heat inletsVoltage 220 Rated current, A 2.2 Rated power of lamps, W 3.6 Dimensions without packaging (LxDxH) 795x710x2030 Dimensions in packaging (LxDxH) 825x740x2200 Net, no more than kg 115 Gross, no more than kg 135

Refrigerated cabinet Capri 0.5SK with a glass door is designed for short-term storage, demonstration and sale of food and beverages. it is more profitable to lay out the goods from the point of view of merchandising. The advantage of the Capri cabinet is its excellent thermal insulation properties, an excellent system of dynamic cooling of the internal volume, ease and convenience in maintenance and operation. Temperature range 0…+7 C°Danfoss compressorController Carel, Evco, DanfossUseful display volume (m)0.48Electricity consumption per day (kW)4.5Internal volume, m3 0.5Useful volume, m3 0.48Shelf area, including bottom area, m2 1.8Shelf dimensions (length x depth), mm 503x619Number of bottles in length 7Number of bottles in depth 8Capacity of 0.5l bottles (glass) 280Ambient temperature +12…+35Cooling type DynamicWay of defrosting by heat inflows Voltage220Rated current, A2,Rated lamp power , W 3,6Dimensions without packaging (LxDxH)595x710x2030Dimensions in a package (LxDxH)625x740x2200Net, not more than kg 90Gross, not more than kg 110

The refrigerating chamber Mariholodmash KX-6,61 is intended for demonstration, cooling, freezing and storage of food and drinks at public catering and trade establishments. The body is made of polyurethane foam sandwich panels and painted galvanized steel with a protective film removed after installation. The kit includes panels, a lock handle with an emergency opening device, a key, plugs, and fasteners. Monoblock LMN 107 Features: - Collapsible design. - Spike-groove connection. - Equipment Cannon, Manny. — MTN door fittings. — Medium temperature single-leaf swing door. - Door locks can be locked with a key. - Device for emergency exit from the refrigerating chamber. - Floor panels coated with galvanized steel. Additional characteristics: - Paint color: RAL 9003. - Panel coating thickness: 1 mm. - Light opening of the door: 800x1850 mm. — Thermal conductivity coefficient of thermal insulation: 0.025 ± 0.005 W/mK. — Specific load on the floor: no more than 15000 kgf/m2. Assembled chamber size: 1960x1960x2200 mm. Weight (unpacked/packed) 310/435 kg. Packing dimensions: 2200x1370x1100 mm Monoblock LMN 107 Cooling room temperature: °C -25.-15. Dimensions (LxDxH) 455x850x720mm. Compressor Secop / Embraco / Tecumseh. Controller Carel / Danfoss. Voltage: V 220. Rated current: A 4.49. Electricity consumption per day (not more than) kWh 16. Packing dimensions (LxWxH) 541x960x870 mm., Net: no more than kg 65. Gross: no more than kg 85. Refrigerant R404A

Refrigerating cabinet Mariholodmash Kapri 1.5 M is designed for cooling and short-term storage of perishable foods and drinks at public catering and trade establishments. The case is made of painted galvanized steel with polyurethane foam filling. suitable for operation at ambient temperature from 12 to 43 °C and relative humidity from 80 to 40% respectively. If the ambient humidity exceeds 80%, condensation may form on the outer surface of the appliance, which is not a defect. a cupboard directly in the culinary workshop or in a hot kitchen, as it is adapted to operation at high air temperatures. Useful display volume (m) 1.43. Electricity consumption per day (kW) 8. Number of bottles in length 20. Number of bottles in depth 7. Capacity of 0.5 l bottles (glass) 700. Ambient temperature +12..+43. Cooling type: Dynamic. Heat inflows. Voltage 220V. Rated current: A 5. Rated lamp power: W 4.8. Dimensions without packaging (LxDxH) 1595x710x2030. Dimensions in packaging (LxDxH) 1625x740x2200. Net, no more than kg 150. Gross, no more than kg 170.

Refrigerated cabinet Capri 1,12SK is intended for short-term storage, demonstration and sale of foodstuffs and drinks pre-cooled to the temperature of the refrigerated volume. Cabinets with a lower arrangement of the unit, even those located behind showcases, better demonstrate the goods - the layout in the cabinets is raised higher and even the lower shelves are visible, which makes it possible to lay out the goods more profitably in terms of merchandising. Danfoss compressorController Carel, Evco, DanfossInternal volume, m3 1.12Useful display volume (m) 1.05Shelf area, including bottom area, m2 3.7Shelf dimensions (length x depth), mm 540x549Electricity consumption per day (kW) 6.5Number of bottles in length 14Number of bottles in depth 7Capacity of 0.5l bottles (glass) 490Ambient temperature +12 +35Cooling type DynamicWay of defrosting natural. Heat inletsVoltage 220Rated current, A 3.15Rated lamp power, W 7.2Dimensions without packaging (LxDxH) 1195x710x2030Dimensions in the package (LxDxH) 1225x740x2200Net, not more than kg 150Gross, not more than kg170

Refrigerated cabinet Mariholodmash Capri 0.7 M is designed for cooling and short-term storage of perishable foods and drinks at public catering and trade establishments. The body is made of painted galvanized steel with polyurethane foam filling. Suitable for operation at ambient temperature from 12 to 43 °C and relative humidity from 80 to 40% respectively. If the ambient humidity exceeds 80%, condensation may form on the outer surface of the appliance, which is not a defect. Temperature regime 0 +7 C°Danfoss compressor Carel, Evco, Danfoss controllerInternal volume, m3 0.7Useable volume, m3 0.68Shelf area, including bottom area, m2 2.5Shelf dimensions (length x depth), mm 703x619 Electricity consumption per day ( kW) 4.7 Number of bottles in length 10 Number of bottles in depth 8Capacity of 0.5l bottles (glass) 400Ambient temperature +12 +43Cooling type DynamicWay of defrosting natural. Heat inletsVoltage 220 Rated current, A 2.1 Rated lamp power, W 2.4 Dimensions without packaging (LxDxH) 795x710x2030 Dimensions in a package (LxDxH) 825x740x2200 Net, no more than kg 105 Gross, no more than kg 125