Heating equipment and supplies in bulk on Qoovee

Rima brand local AlSi10Mg cast heat exchanger 107% yield value Wide heating capacity option (from 70 kW to 3250 kW) Determining the boiler capacity in accordance with the 1:7 flame modulation heat load 6 bar working pressure High seasonal efficiency, low emission values Siemens cascade control panel providing different zone controls 16 boiler cascade connection Compatibility with Open Therm and BUS communication systems Casting slices for ease of installation, use and maintenance low sound level

Forced Burner Boilers Rima brand flexible cast iron sections Wide heating capacity option (from 30 kW to 930 kW) High efficiency 3-pass design High combustion performance with low flue emissions Use with liquid and gas fuel burners Standard and electronic control panel options

Solid Fuel Boilers Rima brand flexible cast iron sections Wide capacity option (from 20 kW to 95 kW) Can be used with wood and coal Chimney flap and simple chimney draft control

Boilers of the Bratsk-M series are designed for heat supply of buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

Boilers "Bratsk-0.8" are designed for heating buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

A cauldron stove with a collapsible chimney, a removable firebox door, an ash box and removable legs.

Kazan-brazier is an excellent solution for cooking in country houses and dachas. When used in food service outlets and cafes. With it, you can easily cook several dishes at the same time, for example pilaf and kebabs, aromatic fish soup and grilled fish. The structure has an optimal height for constant monitoring of the process. The body is covered with heat-resistant enamel, which reliably protects the metal from corrosion. The surface is easily cleaned of dirt after the oven has cooled down. The racks of the combined oven are equipped with thrust bearings, which ensure a stable position of the structure on any surface. For comfortable control of the desired temperature, there is a temperature sensor on the lid.

Potbelly stove "Kamelek" has three big advantages. 1) Hob for cooking. 2) The sand heat accumulator, covering the entire circuit of the stove, allows you to store a significant amount of heat after the fuel burns out. The accumulated heat is enough to heat the room for up to 6 hours. 3) Convection tubes - allow you to quickly warm up the air in the room due to the through placement. Cold air from the bottom of the stove passing through the tubes rises already hot, which significantly increases the heat transfer of the stove. The stove is designed for residential and non-residential premises up to 50 sq.m.

Classic boiler model with a capacity of 200 kW with two rows of additional tube heat exchangers. Heated area - up to 2000m2 (5000m3). The volume of the combustion chamber is 330 liters, the water jacket is 660 liters. Combined grate bars: water-filled + cast iron "Litkom"

Barrel 12 Sauna stove with removable heater, made of 5 mm thick steel. Chimney diameter 115 mm. Barrel 18 Sauna stove with removable heater, made of 5 mm thick steel. Chimney diameter 115 mm.

Taifun 12 (with dry steam function) Sauna stove with closed (dry steam) and open heaters. Made of 5 mm thick steel with convection casing. Chimney diameter 115 mm. Taifun 18 (with dry steam function) Sauna stove with closed (dry steam) and open heaters. Made of 5 mm thick steel with convection casing. Chimney diameter 115 mm.

1) Standart 18 shortened combustion chamber, steel tank with polymer coating Sauna stove, three-component, made of pipe 530 * 8, WITHOUT REMOTE HEATER. Hot water tank of 85 liters made of BLACK METAL (polymer coating). Fuel - wood, coal 2) Standart 18 shortened combustion chamber, stainless steel tank Sauna stove, three-component, made of pipe 530 * 8, WITHOUT REMOTE HEATER. STAINLESS METAL hot water tank 85 liters. 3) Standart 18 External combustion chamber, steel tank with polymer coating Sauna stove three-component, made of pipe 530 * 8, with a remote firebox. Hot water tank for 85 liters made of ferrous metal (polymer coating) Fuel - wood, coal. 4) Standart 18 External combustion chamber, stainless steel tank Sauna stove three-component, made of pipe 530 * 8, with a remote firebox. STAINLESS METAL hot water tank 85 liters.

Large spacious combustion chamber with a depth of 630mm. Universal connection to the heating system (right, left, diagonal). the possibility of connecting a draft regulator (mechanical, with a chain) and a heating element is provided. LITKOM grates (withstand intensive coal firing throughout the entire season) Long-lasting polymer coating of the boiler. 12kW-16kW with hob 18kW-24kW without hob.

Layer-by-layer combustion of fuel. Flue gas combustion chamber, Movable grate. Universal connection to the heating system (left, right, diagonal). Possibility of installing a draft regulator, heating element, automation (turbine and controller), an additional loading hopper, (+100 ... 1500 kg / coal). Cast iron grates standard LITKOM. Durable polymer coating of the boiler.

Universal connection to the heating system (right, left, diagonal). Possibility of installing a draft regulator and heating element. Cooking stove: 6kW-12kW hotplate 1 joke 16kW-18kW burner 2 pieces 25kW-32kW no hotplate Cast iron grates LITKOM (withstand intensive coal burning throughout the season). Durable polymer coating of the boiler.

Briquetted coal for all questions contact

The company offers to carry out a wholesale supply of sunflower husk for technical purposes, granulated . Indicators: Mass fraction of moisture - 7% Mass fraction of total ash - 2.9% Bulk density - 430 k / l Net calorific value - 4160 kcal / kg Total sulfur - 0.1% Terms of delivery DAP , railway transport. Packaging - a big bag weighing 1000 kilograms.

The company LLC "AGROFORT" offers to carry out a wholesale supply of sunflower husk for technical purposes, granulated . Indicators: Mass fraction of moisture - 7% Mass fraction of total ash - 2.9% Bulk density - 430 k / l Net calorific value - 4160 kcal / kg Total sulfur - 0.1% Terms of delivery DAP , railway transport. Packaging - a big bag weighing 1000 kilograms.  

It removes combustion products from the boiler using solid, liquid fuel or gas. The main feature is the presence of thermal insulation between the inner and outer pipes.

The main purpose is the removal of gases and combustion products in straight sections. Single-wall chimneys are universal for use in heating systems using various types of fuel. Standard lengths are 1000, 500 and 250 mm.

Electrode boiler Galan Geyser 6 kW is designed for premises up to 92 m2 with a ceiling height of 2.7 m. Perfect for home, office, shop, summer cottage, driving school, warehouse. Current on each phase 23.7 / 9.1 A. Efficient heating Geyser 6 without control unit.   Characteristic: Rated voltage: 220V / 380V Current type: variable Rated current frequency: 50Hz Maximum boiler current for each phase, frequency 50 Hz: 23.7 A / 9.1 A Rated power consumption: 6 kW Starting: current 4 A   Water volume: 50-80 l The volume of the heated room: 250 m3 Cross-section of the conductive copper core of the connection wire: 4 mm2 Connection to the heating system of the DN coupling: 32 mm Weight: 5.0 kg Length: 320mm Diameter: 130mm Electric shock protection class: 1 Moisture protection: IPx3 splash-proof Power consumption per month of the heating season: up to 1000 * kW / month. - indicated * are the maximum data for continuous operation of the boiler 24 hours a day.   The package includes:   Electrode boiler Galan Geyser 6 kW Recommendations with connection diagrams   The indisputable advantages are small dimensions, the possibility of cascading connection, energy efficiency and low cost. OPTOP LLC is the official importer of electric electrode heating boilers of Galan JSC - we invite individuals and wholesale buyers to cooperation. Always in stock and on order.

Electrode boiler Galan Geyser 15 kW is designed for premises up to 203 m2 with a ceiling height of 2.7 m. Perfect for heating a house, office, shop, summer cottage, driving school, warehouse, kindergarten. 9 A. The inrush current E konomichny heating Geiser 15 without control (without control). Characteristic: Rated voltage: 380V Current type: variable Rated current frequency: 50Hz Maximum boiler current for each phase, frequency 50 Hz: 22.7 A Rated power consumption: 15 kW Starting: current 9 A Heating medium volume: 100-200 l The volume of the heated room: 550 m3 Cross-section of the conductive copper core of the connection wire: 4 mm2 Connection to the heating system of the DN coupling: 32 mm Weight: 5.3 kg Length: 410 mm Diameter: 130mm Electric shock protection class: 1 Moisture protection: IPx3 splash-proof Power consumption per month of the heating season: up to 2000 * kW / month. - indicated * are the maximum data for continuous operation of the boiler 24 hours a day.   The package includes:   Electrode boiler Galan Geyser 15 kW Boiler passport Recommendations with connection diagrams   The indisputable advantages are small dimensions, the possibility of cascading connection, energy efficiency and low cost. OPTOP LLC is the official importer of electric electrode heating boilers of Galan JSC - we invite individuals and wholesale buyers to cooperation. Always in stock and on order.  

The process of heating the coolant in the 9 kW Geyser electrode boiler occurs due to its ionization, i.e. the splitting of coolant molecules into positive and negatively charged ions, which move, respectively, to the negative and positive electrodes, while releasing energy, i.e. the process heating of the coolant goes directly, without an "intermediary" (for example, heating element). The Geyser electrode boiler is a precisely calculated device that self-adjusts to the required power consumption. When the coolant is heated, its electrical resistance decreases. The electric current passing through the electrodes increases, and the power consumption increases accordingly. The boiler is starting to "recruit" the electrical power and giving it in the form of so epla coolant. The final power consumption will depend on the temperature of the coolant set by the consumer and its amount. At the request of the buyer, the 9 kW Geyser electrode boiler is equipped with automatic equipment, which allows the consumer not only to set the desired temperature of the radiators or the air temperature in the room, but also automatically maintain it around the clock, turning it on and off. Galan Geyser 9 kW electrode boiler is designed for premises up to 125 m2 with a ceiling height of 2.7 m. Perfect for heating a house, office, shop, summer cottage, driving school, warehouse. Starting current 7 A. Economical heating boiler Geyser 9 without control unit (without automation). Characteristic: Rated voltage: 220V / 380V Current type: variable Rated current frequency: 50Hz Maximum boiler current for each phase, frequency 50 Hz: 13.7 A / 40 A Rated power consumption: 9 kW Starting: current 7 A   Heating medium volume: 50-100 l The volume of the heated room: 340 m3 Cross-section of the conductive copper core of the connection wire: 4 mm2 Connection to the heating system of the DN coupling: 32 mm Weight: 5.0 kg Length: 360mm Diameter: 130mm Electric shock protection class: 1 Moisture protection: IPx3 splash-proof Power consumption per month of the heating season: up to 1300 * kW / month. - indicated * are the maximum data for continuous operation of the boiler 24 hours a day.   The package includes:   Electrode boiler Galan Geyser 9 kW Recommendations with connection diagrams   The indisputable advantages are small dimensions, the possibility of cascading connection, energy efficiency and low cost.   OPTOP LLC is the official importer of electric electrode heating boilers of Galan JSC - we invite individuals and wholesale buyers to cooperation. Always in stock and on order.

Heating radiators from leading manufacturers: Global, Rifar, Rommer, Royal Termo, STI A wide range of rulers - aluminum, bimetallic, steel, cast iron.

Available - chimney systems, tanks and heat exchangers, steel chimneys, heaters, convectors, heaters.

Available - heating stoves, sauna stoves, electric heaters, fireplace stoves, fireplace inserts, fireplace linings, additional equipment

Pump membrane dosing units NDR-2M are designed for volumetric pressure dosing of neutral and aggressive liquids, emulsions and suspensions. The scope of application of the membrane dosing unit is determined by the resistance of the materials of the flow path in the dosing medium and the design of the electrical equipment. The diaphragm pumping dosing unit NDR-2M can be used for dosing harmful substances, flammable and combustible liquids, provided that safety rules are observed. To increase reliability, the diaphragm metering pump NDR-2M is equipped with a two - layer membrane made   from treated PTFE . 8 advantages of the diaphragm dosing pump NDR-2M: 1. Tightness. During operation of the NDR-2M pump, leakage of the pumped and working fluid is completely excluded. 2. Possibility of regulation without stopping the pump.   The design of the NDR-2M pump provides for flow adjustment during pump operation.   3. Simplicity of operation and maintenance.   In the pump NDR-2M   there is no need to constantly monitor and maintain   plunger seal as is the case with LP plunger pumps. 4. Wear-resistant valve. The diaphragm pump valves are specially designed for long-term operation in contact with aggressive media. Their service life is much longer than that of conventional   pumps LP. 5. Ability to operate the pump at high pressures up to 100 MPa. Many diaphragm pump manufacturers cannot achieve this. 6. Membrane condition monitoring system. If the diaphragm is damaged, the monitoring system will report this. Even in the event of a diaphragm rupture, the pump remains operational until the end of the process. The signaling device can be both a pressure gauge and electronic devices that will report the problem to the control station. 7. Safety system In the event of a blockage in the outlet piping due to faults or errors, a built-in valve will protect the pump from overload.             8. Saving money Favorable price level achieved through our own production   Technical characteristics of the diaphragm pump NDR-2M 40/400: Feed-40 l / hour The pressure at the outlet of the pump is 400 kgf / cm2; Electric motor power - 3 kW 1500 rpm. Factory warranty - 1 year!

Climate panels EFFI is a universal system for creating thermal comfort in rooms. In addition to highly efficient heating, ceiling climate panels can also be used for cooling. Climate panels can work all year round, in any season, creating the right comfort at the right time. An important advantage of climate panels is the ability to work with absolutely any heat source: gas or electric boiler, solid fuel system or heat pump, with heating mains. There is no dependence on the price of a particular energy carrier, there is the possibility of choosing the most profitable option. Climatic panels are especially effective in large and high rooms: production halls, warehouses, sports and concert venues, retail and exhibition rooms. Safe climate panels can be used in rooms with a high category of fire and explosion hazard, they are perfect for hospitals, kindergartens and schools.

Heat pumps MIDI - designed for heating, hot water and cooling residential and industrial facilities with an area of 300-1500 (cottages, swimming pools, office buildings, hotels, industrial premises, shopping centers). For homes, offices, industrial premises: 300 - 1500 m² Appointment: heating, hot water supply, passive conditioning, active conditioning Power models: 20-46 kW Price: 6 924 - 9 175 € Characteristics: 7 ”touch screen Multilingual control menu High heat carrier temperature 65 ° C Additional heat source control Flexible programmable timer Hot gas heat exchanger Integrated frequency converter Internal temperature sensor Simple installation and maintenance Ability to integrate into the Smart Home system Room cooling Weather-dependent temperature control of the heating system Automatic regulation of class A circulation pumps

Emitters do not heat the air. The generated thermal radiation fills the space under the emitters, heating directly people and objects. This avoids humidity fluctuations in the room, which are dangerous for living things and significantly reduces the risk of sudden temperature changes associated with drafts. Space heating with SUN BEAM gas emitters consists in transferring thermal energy to a specific space, which makes it possible to differentiate a constant temperature inside the same room or to allocate heated and unheated zones in it. Therefore, emitters are often used as one of their forms of heating production, as well as retail premises, warehouses and hangars. Infrared gas radiant heaters also pay off in industrial, sports facilities, industrial premises, etc. SBC Ceramic Gas Infrared Emitters An infrared ceramic gas emitter is a heating device with an open combustion chamber in which a gas-air mixture is burned on the surface of a ceramic tile. The air needed for combustion is taken from the room, and the exhaust from it is taken here, because the room in which the ceramic emitters are installed must be adequately ventilated. Tubular infrared gas emitters SBT Tubular infrared gas emitters are a modern device designed for heating industrial and commercial facilities, as well as warehouses, sports facilities, etc. Tubular radiators SBT can significantly reduce the cost of heating facilities. Tubular emitters allow you to get heat instantly. The outer surface of the pipe is heated to a temperature of + 360 ° C and emits heat using infrared rays, which, thanks to the installed reflector, are sent to the bottom of the room. Thus, we use 100% of the heat that is felt in the lower and therefore used areas of the building. The entire line on the site:

The AIR series of air heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically disadvantageous. For houses: 150 - 500 m² Purpose: heating, hot water supply, passive conditioning Power models: 12-45 kW Price: 5 451 - 14 367 € This series of heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically unprofitable. The design of the pump consists of two blocks: external and internal. Combining an air heat pump gives you greater freedom and flexibility when designing your ideal heating system. Features of AIK AIR heat pumps: Heat carrier heating up to 55 ° С Weather dependent control High COP value up to 5 High level of equipment protection AIK AIR equipment: Panasonic EVI compressors with steam injection to increase productivity by 5-7% and protect the compressor from overheating Air conditioning module Online-control In more detail:

EXW from 26,22 Euros Please, send you requirement to  

• Single- Double serpentine boilers are used in all areas where hot water is needed; for example apartments, hotels, factories, hospitals. • The boiler provides hot water f rom a steam boiler, hot water or solar collector. • Optionally electrical resistance is added. • Volume: 100-5,000 lt.

• It is designed and manufactured to meet the needs of wood, textile, chemical, food and similar industrial facilities in the heating of large residential units. • Our boilers are manufactured with large steam volume to allow sudden steam usage. • Specially designed water holders are placed in the boiler to minimize the drag of the water droplets with steam. Thus, the steam going to the system is drier. • ISO 9001 quality management systems which form the basе of our quality, have been chosen as quality management model in respect to design, development, facility and service

 It provides production easiness with its wide product kind.   Changeble type EPDM membrane is used in our tanks.   Working temperature range is -10°C + 100°C.   It is coated with electrostatical Powder-Coating dust paint.   It is tolerable to scratching, hitting and corrosion.   No contact between the water and the tank.   The plant per-gas pressure values are shown by the help of the using manual.   The pressure balance should be done by the help of the using manual.   The heat systems should be connected to the black line.   Anti-freeze maybe used in the systems.  ADVANTAGES   Avoids liming, corrosion and elongates the life-time of the installation.  Solution for heating problems and no need for maintenance.  Installation and labour costs are decreased to %50 - %80 according to the specifications of the  building.  Provides increase in productivity and additional fuel save as the heating water is heated under pressure.  Has decorative look.  Avoids the problem of vaporization in open expansion tanks, freezing of water and drop in the water level.  A security ventile fitting to your system is expressed in the usage manual. (In expansion tanks)

Wood fuel briquettes Pini Kay  - modern, environmentally friendly solid fuel for stoves of various types and purposes, Central heating boilers and fireplaces.   1 ton of Pini Kay fuel briquettes replace 5 cubic meters of classic dried birch firewood.   Technical characteristics of Pini Kay fuel briquettes: - Calorific value, ≈ 5000 kWh / kg - Ash content, about 0.7 % - Humidity, ≈ 6 to 8 %   Our products are fully certified. We will be happy to answer all your questions!

VALFEX aluminum radiators are high-strength aluminum devices that can be used both for autonomous heating systems and for central heating systems of low-rise buildings. The high heat dissipation of the sections makes it possible to use radiators in heating systems with a low-temperature operation system. The low inertia of the radiators provides effective thermal management with a guarantee of maximum comfort. Non-freezing liquids, whose pH is in the range of 7-8, can be used as a heat carrier. General characteristics of the device: Operating pressure: 16 atm. Pressure testing: 24 atm. For the production of radiators, a special low-zinc aluminum alloy is used. All radiators are double-colored: the first layer is applied by electrophoresis, providing corrosion protection, both the external and internal surfaces of the device. The second layer is applied in an electrostatic system by coating the prepared radiator surface with epoxy powder. Such a coating significantly increases the reliability of radiators and reduces the likelihood of channel overgrowth. Maximum heat carrier temperature: 110 ° С. The modern design of the device harmoniously fits into almost any interior. VALFEX aluminum and bimetallic radiators are certified by the State Standard of the Russian Federation and are recommended for use in Russian conditions. Fully adapted for use in Russian central heating systems. Warranty for radiators is 5 years.

EvoTech 22 kw electric fan heater provides excellent heating from 100 square meters to 380 square meters, and stands out with its robust structure and universal components in the industrial fan heaters category.

Exhaust grille R-20 is used in forced and natural ventilation systems, it is used to design the inlet / outlet of the ventilation duct. The standard white color allows it to fit into any design. Louvers provide airflow at an optimal angle, protect from dust and debris. The dimensions of the product are 200x200 mm, it is made of ABS plastic, fixed with glue or with screws. Advantages: 1. low price; 2. attractive appearance; 3. Easy assembly and disassembly.