Industrial Equipments and Machines in bulk on Qoovee

Switching power supply unit in a housing, specially designed for electric drive systems. Input voltage ~ 85 ... 265V, output voltage 60V (adjustable ± 10%), load current rated / peak 8.5A / 10.5A (power 500W). Overload and overvoltage protection. Size 261x103x65. Weight 1.2kg. Power supplies of the Leadshine trademark (China) are specially designed for electric drive systems. The power supplies have high efficiency, high dynamic performance in terms of current supplied to the load, built-in protective circuits against short-circuit and overvoltage. Leadshine products have earned an excellent reputation for their high quality and competitive prices. We strongly discourage the use of similar power supplies from little-known Chinese manufacturers; the use of such power supplies can lead to failure of the electronic equipment of the machine.

Switching power supply in a housing, specially designed for electric drive systems. Input voltage ~ 180 ... 250V, output voltage 42V, load current rated / peak 7A / 9A (power 300W). Overload and overvoltage protection. Size 132x104x60. Weight 0.71kg.

Starting capacitor CBB65 25mkF 450V. For use in conjunction with the PLZ027 3-phase induction motor starter. The capacitances of the capacitors are selected in proportion to the power of the electric motor, according to the instructions on PLZ027.

The PLZ027 module is designed to start 3-phase asynchronous motors from a single-phase AC 220V AC network. The maximum power of the electric motor is 2200W. The starting block consists of an electronic module with connected starting and operating capacitors. Capacities of capacitors are selected in proportion to the power of the electric motor, according to the instructions. Asynchronous motor starting units are designed to start 3-phase asynchronous motors from a single-phase AC network ~ 220V. These units are a more cost-effective alternative to frequency converters when the speed of the electric motor does not need to be adjusted (circular saw, exhaust fan, water pump, etc.). The starting unit for asynchronous motors consists of an electronic module with connected starting and operating capacitors. Capacities of capacitors are selected in proportion to the power of the electric motor, according to the instructions.

The set includes: multichannel driver PLC330 - 1 piece ShD PL42H48-D5 - 3 pieces power supply unit NES-350-27 - 1 piece dumper PLZ005 - 1 piece PLZ007 module - 1 piece PLL01 sensor - 3 pcs. Ready-made sets of electronics for controlling a CNC machine. The kits are built using Purelogic R&D electronics, suitable for building cnc milling machines.

Grinding machines for 2/3/4-way tungsten carbide or HSS end mills in various diameters. Grinding wheel rotation speed 6000 rpm. The set includes a set of collets, a clamping nut, a collet chuck and a ~ 220V control unit. Machines with index "H" - high precision 0.01mm. Machines with the index "A" - support the production of an end mill from a bar.

Grinding and lapping machines for tungsten carbide or HSS drills of various diameters. Apex angle ranges from 90 ° -150 °, clearance angle ranges from 0 ° -12 °. Grinding wheel speed 5000 rpm. The set includes a set of collets, a clamping nut, a collet chuck and an electronic control unit for the machine ~ 220V

The universal milling machine has a layout of classic models of universal machines, a work table moving vertically, the ability to perform vertical and horizontal milling, a rigid support for the horizontal spindle. Depending on the milling method (horizontal or vertical), the milling head is rearranged. With vertical milling, it is possible to change the angle of inclination of the vertical milling head.

Cast bed. Digital display for controlling the movement of the spindle quill. Engine power, 150W. Maximum drilling diameter, 6mm. Spindle taper BT10. Spindle head travel, 200mm

Robot manipulator with 6 axes of movement. The drives are MG996 and SG90 servos. Arduino Uno R3 controller based control. The set includes control electronics, power supply and connecting wires. It will be used in hobby production and in the study of robotics. Robot manipulator is an automatic machine, stationary or mobile, consisting of an executive device in the form of a manipulator with several degrees of mobility and a reprogrammable program control device designed to perform specified motor and control functions. Robots-manipulators of the PLRP series are close analogs of industrial robots, which in turn are one of the components of automated production systems and can increase labor productivity in general with a constant level of quality. The products presented in the section are an excellent educational base for acquaintance with the fundamental principles of robotics and modern production.

Robot manipulator with 4 axes of movement. The drives are MG996 and SG90 servos. Arduino Uno R3 controller based control. The set includes control electronics, power supply and connecting wires. It will be used in hobby production and in the study of robotics. Robot manipulator is an automatic machine, stationary or mobile, consisting of an executive device in the form of a manipulator with several degrees of mobility and a reprogrammable program control device designed to perform specified motor and control functions. Robots-manipulators of the PLRP series are close analogs of industrial robots, which in turn are one of the components of automated production systems and can increase labor productivity in general with a constant level of quality. The products presented in the section are an excellent educational base for acquaintance with the fundamental principles of robotics and modern production.

Universal linear modules based on roller guides, ball screw 1605 and aluminum profile. The module is compatible with any 42mm (NEMA 17) and 57mm (NEMA 23) flange stepper, servo stepper and servo motors. The set includes a coupling type BA1820-8-8. The linear module is supplied without an electric motor

Universal linear modules based on linear bearings, shafts 16mm and ball screw 1605, with corrugated protection and inductive end sensor. The module is compatible with any 57mm (NEMA 23) flange stepper, servo stepper and servo motors. Linear module is supplied without motor, motor bracket and coupling

Universal linear modules based on LMAB block with linear bearings, 16mm shafts and 1605 ball screws. The module is compatible with any stepping, servo-stepping and servo motors with 57mm flange (NEMA 23). Linear module supplied without motor and coupling

Universal linear modules based on linear bearings, 16mm shafts and 1605 ball screws. The module is compatible with any stepping, servo-stepping and servo motors with 57mm flange (NEMA 23). Linear module supplied without motor and coupling

Universal linear modules based on linear bearings, 12mm shafts and 1204 ball screws. The module is compatible with any stepping, servo-stepping and servo motors with 57mm flange (NEMA 23). The Linear Module is supplied without motor and coupling.

Vice for a mini-machine. The vise has 4 fixing holes for fixing the mini-machine on the work table.

A set of collets for a mini-machine for fixing cutters and drills with diameters of 1mm-6mm. Set of 8 collets.

The compact CNC milling machine is designed to work with plastic, composite materials, wood, non-ferrous metals (copper, aluminum, brass, etc.). All parts of the machine are made of metal, only covers are made of plastic. The machine will find application in the manufacture of prototypes of parts, in the hobby business, in circles and in educational institutions for training on machine tools. The machine is easy to operate, reliable and safe. Specifications: Drill diameter, cutter (collet): 0.5-6mm; Longitudinal movement: 135/50 / 100mm; Axle drives: ШД PL57H56, screw-nut; Positioning resolution: 0.01 mm; Working speed: up to 1000 mm / min; Spindle bore diameter: 8mm; Spindle rotation speed: 2000rpm; T-slot width: 8mm; Table size: 88x50mm; Supply voltage, current: 12V, 5A; Motor power: 70W; Overall dimensions: 330x300x350mm; Machine weight: 5kg. Contents of delivery: • Mini CNC milling machine; • The vice is not rotary; • A set of tools and keys; • Power supply unit for spindle 220V / 12V; • Manual.

The compact milling machine with a DC motor is designed for working with plastics, composite materials, wood, non-ferrous metals (copper, aluminum, brass, etc.). All parts of the machine are made of metal, only covers are made of plastic. The machine will find application in the manufacture of prototypes of parts, in the hobby business, in circles and in educational institutions for training on machine tools. The machine is easy to operate, reliable and safe. Specifications: Drill diameter, cutter (collet): 0.5-6mm; Longitudinal movement: 135/50 / 100mm; Spindle bore diameter: 8mm; Spindle rotation speed: 2000rpm; T-slot width: 8mm; Table size: 88x50mm; Supply voltage, current: 12V, 5A; Motor power: 70W; Overall dimensions: 330x200x150mm; Weight: 4kg.

A compact lathe with a DC motor for processing plastics, composite materials, wood, non-ferrous metals (copper, aluminum, brass, etc.). All parts of the machine are made of metal, only covers are made of plastic. The machine will find application in the manufacture of prototypes of parts, in the hobby business, in circles and in educational institutions for training on machine tools. The machine is easy to operate, reliable and safe. Specifications: Chuck: D = 48mm, 3 jaws; Swing over bed: 100mm; Distance between centers: 135mm; Spindle bore diameter: 8mm; Spindle rotation speed: 2000rpm; T-slot width: 8mm; Table size: 88x50mm; Supply voltage, current: 12V, 5A; Motor power: 70W; Overall dimensions: 330x200x150mm; Weight: 3.5kg.

A compact drilling machine with a DC motor designed for working with plastic, composite materials, wood, non-ferrous metals (copper, aluminum, brass, etc.). All parts of the machine are made of metal, only covers are made of plastic. The machine will find application in the manufacture of prototypes of parts, in the hobby business, in circles and in educational institutions for training on machine tools. The machine is easy to operate, reliable and safe. Specifications: Drill (collet) diameter: 0.5-6mm; Longitudinal movement: 135/50 / 100mm; Spindle speed: 12000rpm; T-slot width: 8mm; Table size: 123x100mm; Supply voltage, current: 12V, 5A; Motor power: 70W; Overall dimensions: 300x300x350mm; Weight: 3.8kg.

CNC pneumatic marking machine with USB interface. The machine is designed for marking by impact method on various surfaces - metal (steel, aluminum), plastic, stone, etc. The depth of marking is up to 1mm, depending on settings and material. The set includes a machine and a control unit with a USB interface. Technical characteristics: Working area: 170 * 100mm XY axis drive: stepper motors Marking depth: 0.02-1mm (depends on material and settings) Positioning resolution: 0.01 mm Marking speed: up to 2000 mm / min Air pressure: 0.3-0.7MPA Repeatability: 0.05mm Machine weight: 34 kg

CNC laser marking machine with rotary axis. The machine is designed for marking with a solid-state laser with a power of 20W on various surfaces - metal (steel, aluminum), plastic, stone, etc. The depth of marking is up to 1mm, depending on settings and material. The set includes a machine, a rotary axis and a control unit with a USB interface. Specifications: Working area: 220 * 220mm Laser power: 20W Emitter resource: 100,000 hours Min line width: 0.01mm Marking depth: up to 1mm (depends on material and settings) Engraving speed: 7000mm / sec (line) Supply voltage: 220V Power consumption: up to 500W Machine weight: 34kg

Laser diode modules with driver. Designed for laser cutting and engraving materials on CNC machines. Wavelength 808nm (infrared), models of various powers are available. TTL input for on / off. Resource - more than 5000 hours of continuous work. Industrial lasers, glass lens installed.

Laser diode modules with driver. Designed for laser cutting and engraving materials on CNC machines. Wavelength 450nm (blue), models of various powers are presented. TTL input for on / off. Resource - more than 5000 hours of continuous work. Industrial lasers.

Laser diode modules with driver. Designed for target designation on a CNC machine or in automation systems. Models with point, line and crosshair indication are presented. Resource - more than 5000 hours of continuous work. Industrial lasers, glass lens installed.

Honeycomb work tables are designed to be installed in CO2 laser CNC machines. The cellular structure is optimal for holding the workpiece and removing combustion products. Tables are available in various sizes.

Kits for mounting optics and building a laser path in a CO2 laser engraver are presented. The laser heads carry out the final focusing of the laser beam and cutting the material. More powerful heads require air cooling. Lenses and mirrors are not included in the set and must be purchased separately.

Various models of laser tubes for CO2 laser CNC machines with different power and size are presented. The tubes are filled with a CO2-N2-He gas mixture. Requires high voltage power supply and liquid cooling system to operate.

Safety glasses against laser radiation are required to protect the eyes when working with laser radiation. Danger to eyes, both direct and reflected from the laser beam. Models are presented to work with lasers of various wavelengths, protect from ultraviolet radiation.

The machine is designed for laser engraving on various materials - wood, plastic, etc. The machine is supplied in a complete set - the machine itself in the form of modules for self-assembly, laser module, electronics, goggles and software. Working area: 100 * 120mm; Laser power: 2.0W; Wavelength: 405nm; Supply voltage: 12V; Control interface: USB.

The machine is designed for laser engraving on various materials - wood, plastic, etc. The machine is supplied in a complete set - the machine itself in the form of modules for self-assembly, laser module, electronics, goggles and software. Working area: 80 * 80mm; Laser power: 0.3W; Wavelength: 405nm; Supply voltage: 5V; Control interface: USB.

Supply voltage ~ 400V / 50-60Hz. Power consumption 16.8 kW. Cutting current 30-105A. Cutting thickness, steel 3 ... 32mm. Air cooling. Includes remote control and full-size 180 ° machine torch. Wire length - 15.2m. Dimensions 592x274x508. Weight 45kg.

Supply voltage ~ 400V / 50-60Hz. Power consumption 9kW. Cutting current 20-65A. Cutting thickness, steel 3 ... 25mm. Air cooling. Includes remote control and full-size 180 ° machine torch. Wire length - 15.2m. Dimensions 500x234x455. Weight 26kg.

Supply voltage ~ 400V / 50-60Hz. Power consumption 5.95kW. Cutting current 20-45A. Cutting thickness, steel 3 ... 25mm. Air cooling. Complete with T45m machine torch. Wire length - 7.6m. Dimensions 426x172x348. Weight 16kg.

Oxygen-plasma and air-plasma cutting systems MetalCut Plasma cutting is a type of plasma processing of materials, in which a plasma jet is used as a cutting tool instead of a cutter. We offer MetalCut systems for oxygen-plasma and air-plasma cutting, which are not inferior in parameters to known systems. The cost of MetalCut systems is significantly lower than similar products from other companies. Consumables for MetalCut systems are presented in the corresponding section. Supply voltage ~ 380V / 50Hz. Power consumption 47kW. Cutting current 40A ... 200A. Cutting thickness, steel 1 ... 45mm. Water cooling. Complete with automatic cutter. Dimensions 800x380x810. Weight 90kg.

Oxygen-plasma and air-plasma cutting systems MetalCut Plasma cutting is a type of plasma processing of materials, in which a plasma jet is used as a cutting tool instead of a cutter. We offer MetalCut systems for oxygen-plasma and air-plasma cutting, which are not inferior in parameters to known systems. The cost of MetalCut systems is significantly lower than similar products from other companies. Consumables for MetalCut systems are presented in the corresponding section. Supply voltage ~ 380V / 50Hz. Power consumption 18kW. Cutting current 30A ... 100A. Cutting thickness, steel 0.3 ... 22mm. Air cooling. Complete with automatic cutter. Dimensions 695x320x580. Weight 51kg.

Oxygen-plasma and air-plasma cutting systems MetalCut Plasma cutting is a type of plasma processing of materials, in which a plasma jet is used as a cutting tool instead of a cutter. We offer MetalCut systems for oxygen-plasma and air-plasma cutting, which are not inferior in parameters to known systems. The cost of MetalCut systems is significantly lower than similar products from other companies. Consumables for MetalCut systems are presented in the corresponding section. Supply voltage ~ 380V / 50Hz. Power consumption 10kW. Cutting current 30A ... 63A. Cutting thickness, steel 0.3 ... 12mm. Air cooling. Complete with automatic cutter. Dimensions 585x280x485. Weight 26kg.

Electromechanical professional cutter lift (axle 3 assembled) driven by a 24V DC geared motor. Travel stroke 150mm, speed up to 2500mm / min. Compatible with HYDCNC controllers THC CHC-200E, PTHC-200DC or any other controller that can drive the 24V DC electric motor of the elevator.