Measuring instruments in bulk on Qoovee

High Precision Solid Density Meter Gold Purity Tester Density Meter 0.001-120g Parameter:Model:XF-120KWeighing range:0.001-120gDensity accuracy:0.0001g/cm3Testing time: about 5sTest type: Gold, Platinum, KT gold, Silver, Palladium etc.

Digital Density Meter Precious Metal Gold Automatic Soild Density Detector Name: Digital Density Meter Voltage: 100-240V Model: XFCNMD-3005S Weighing range: 0.005-300g Density readability: 0.001 g/cm3 Language system: support English Measuring time: 5 seconds Display screen: 5 inch industrial touch screen Measurement type: any irregular solids, particles, floating bodies Result display: density, volume, volume percentage, density average, density minimum, density maximum Measurement principle: Archimedes principle buoyancy method Density range: density > 1, < 1 can be tested Density measurement platform: ABS integrated injection molding, free to choose the flip mode (magic measurement frame, can be freely removed) Parameter setting: water temperature setting, measuring solution density compensation setting, standard material density setting, standard volume setting Data statistics: automatic 100 groups of density value saving function, and according to the number of saved groups automatically display the average value, maximum value, minimum value Calibration mode: single-point automatic calibration, multi-point automatic calibration Data interface: RS-232 standard interface Water sink: PC material integrated injection molding transparent sink Water sinksize: 15.3×10.7×8.0cm (L×W×H)   Outer package size: 42.5×17.5×32.5cm (L×W×H)  

Gold Purity Content Detector Gold K Value Tester Gold And Silver Density Meter SpecificationModel：CC-1200KWeigh accuracy：0.005g~ 1200gMax weight：1200gProportion of precision：0.001 g/cm3Set function：Solution compensation temperature compensationTest time:about 10sTest function:Gold purity,K number or platinum platinum Pt two mixed metal mixing ratioOptional:Printer melting furnace. wind and dust cover,Pack size:45*24*46mmWeight:7.5kgPower：110V - 220V（V\HZ）

ME2400 Vortex Flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe. The number of swirls are proportional to the volumetric flow in the pipe. Vortex flowmeter widely used for gases, steam and liquid applications. It is ideal for measuring saturated and superheated steam in large facilities to improve steam production efficiency.

The flow meter RSJ-50 is installed in the hydraulic compartment of the fuel dispenser. And it is designed to measure the volume of fuel passing through the hydraulic system of the fuel dispenser. In general, for this piston flowmeter, its accuracy is ±0.2%. Compared with similar products, this accuracy is higher and its lifespan is long-lasting. The flowmeter is an important guarantee for the metering function of the tanker. It can still work normally in an ultra-low temperature environment of minus 40 degrees. Material & Structure of Flow Meter RSJ-50 ◈Body material: aluminum alloy housing, stainless steel sleeves, composite piston seal, stainless steel rocker mechanism◈Structure: stainless steel cylinder liner, four-piston strokes◈Advantage: novel appearance, small body, high strength, good wear resistance, accurate measurement, long service life. Working principle The principle of operation of flow meter RSJ-50 is based on the passage of fuel through a metering device. Inside the flowmeter housing, it has four cylinders with pistons operating due to the kinetic energy of the liquid passing through them. The pressure of the liquid is created by an external oil transfer pump – ZYB-50. The pistons are placed in pairs on two connecting rods in four mutually perpendicular measuring cylinders with a volume of 0.125 liters each. Fuel alternately enters each of the four cylinders, then is fed to the output of the volume meter. Pistons with connecting rods under the pressure of fuel perform reciprocating motion in the cylinders. Connecting rods rotate a vertically positioned crankshaft, the free end of which protrudes outside the housing and is connected to the pulse generator by means of a coupling. It can complete with a rectangular O-ring IO50-09. Besides, O-rings are oil & gas-resistant with an operating temperature range from -40°C to +55°C. Technical Parameters of Flow Meter RSJ-50 Model RSJ-50 Flow rate 5L-60L/min Discharge rate per revolution 0.5L Adjustable Minimum Volume 0.05% Accuracy ±0.2% Repeatability ≤0.07% Dimension 50*29*24cm Net weight 10kg Gross weight 10.5kg Package 2PCS/CTN

The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter ◈Compact structure◈Easy maintenance◈Easy to read and operate mechanical display◈Flexible installation◈Low pressure drop Technical Parameters Model OGM-25 OGM-40 Size 25mm/1” 40mm/1(1/2)” Flow Rate Range 20~120L/min 40~400L/min Accuracy ±0.5% Repeatability ≤0.17% Max. Pressure 16Bar 6Bar Dimension 30*26*36cm 36*33*30cm Net weight 7.5kg 19.5kg Gross Weight 8kg 20.5kg Package 1pc/carton 1pc/wooden case

MSeries flow meter is a kind of positive displacement flowmeter, belong to the class with the highest accuracy in the . in the production of petroleum industry and , from oil extraction, transportation, smelting and processing to trade sales, flow measurement runs through the whole process. No link is inseparable from flow measurement, otherwise the normal production and trade exchanges in the petroleum industry will not be guaranteed. Features of M series Flow Meter Excellent stepless trimming device (wear compensation device) for positive and negative calibration of the flowmeter. High accuracy and repeatability over a large range; ultra-high accuracy at constant flow. Low maintenance, low wear, long life Low pressure loss, true gravimeter Measurement accuracy is not affected by changes in temperature, pressure and viscosity Available in aluminium, cast iron, cast steel and stainless steel Applications of M series Flow Meter this kind of flow meter can be applied into various fields, such as refined petroleum products, unleaded gasoline, leaded gasoline, diesel oil, kerosene, fuel oil, propylene; motor oil, liquefied petroleum gas, crude oil, etc.

Universal water meter by METER LLC 1/2" SVU15-110 mm with gaskets and a set of mounting parts. This universal apartment (household) water meter is a single-jet, dry-running and with high accuracy measures the flow of cold and hot water passing through the water supply system. Installation of this water meter at home allows you to significantly reduce the cost of paying utility bills.The company "METER" is one of the leaders in the production of apartment water meters in Russia and offers reliable and high-quality solutions.Cold and hot water meters are designed to measure the volume of drinking cold and hot water by individual by consumers according to SanPiN 2.1.4.1074-01.In terms of resistance to ambient temperature and humidity, the meters correspond to version B4 in accordance with GOST 12997. In terms of metrological classes, the meters correspond to class "B" for horizontal installation or class "A" for vertical installation in accordance with GOST R 50193.1 .Diameter of conditional pro travel, mm: 15 Nominal pressure, MPa (bar): 1.6 (16) Water temperature, : 5...90 degrees Nominal flow rate, m3/hour: 1.5 Maximum flow rate, m3/hour: 3.0 Overall dimensions, mm, no more : - length: 110 - width: 63 - height: 70 Equipment - Vane meter for cold and hot water SVU-15-110mm - 1 pc. - Passport - 1 pc. - Operation manual - 1 pc. - Mounting kit Fitting - 2 pcs. Nut - 2 pcs. Gasket - 2 pcs.

Maximum flow, m3/h 10 Nominal flow, m3/h 6 Minimum flow, m3/h 0.06 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow rate, Pa ≤400 Meter sensitivity threshold, m3/h 0.012 Ambient temperature operating range, °С from -40 to +60 Maximum allowable pressure of the measured medium, kPa 5 a meter for several apartments, a country house, a summer cottage or a cottage economy, then the Prince G6 gas meter is suitable. The device is designed to measure gas flow up to 10 m³/h. The direction of gas flow can be absolutely any. Installation of equipment is possible both indoors and outdoors. Also, this equipment is equipped with a built-in thermal corrector.

Maximum flow, m3/h 6 Nominal flow, m3/h 4 Minimum flow, m3/h 0.040 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow, Pa ≤400 Meter sensitivity threshold, m3/h 0.030 Ambient temperature operating range, °C from -40 to +60 Maximum allowable pressure of the measured medium, kPa M "G4 is suitable for installation in two apartments or a country house. The device is designed to measure gas flow over 6 m3/h. The counter is equipped with an internal thermal corrector. Equipment can be installed both indoors and outdoors. The direction of the gas flow can be any. Gas meters are manufactured in explosion-proof design in accordance with the requirements of the Technical Regulations of the Customs Union TR CU 012/2011 "On the safety of equipment for operation in explosive environments".

Maximum flow, m3/h 6 Nominal flow, m3/h 4 Minimum flow, m3/h 0.04 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow rate, Pa ≤400 Meter sensitivity threshold, m3/h 0.008 Ambient temperature operating range, °С from -40 to +60 Maximum allowable pressure of the measured medium, kPa 5 This gas meter model "Prince" G4 is suitable for installation in two apartments or a country house. The device is designed for accurate measurement of gas consumption not more than 6 m³/h. Installation of equipment is possible both indoors and outdoors. The direction of the gas flow can be any. In addition, the device is equipped with a built-in thermal corrector.

Bank Transfer / Bitcoin/USDT/Alipay accepted   🚶Provide   Delivery Only.   HOT PRICES/UNBEATABLE PRICES, HOT OFFERS/WHOLESALES PRICES FOR INDIVIDUAL.   100% Safe Delivery   100% TRADE ASSURANCE   100% On-Time Shipment Protection

Price: $637 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Digital pressure module, 0.025% of full scale, 0 to 5000 psi inch, gauge, 1/4 NPT M

Price: $1,544 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 0.035% reading accuracy Gauge, absolute and differential pressure up to 15,000 psi in. / 1000 bar / 100 MPa Enhanced Simplicity Menuless Interface Measure and mA source with external loop power or internal 24 VDC power supply. Precise Thermometer with True Ohm Technology Storage and Recall of Previously Used Screens Flexible Power Options, Including Rechargeable > The HPC40 Series is the world's first combined pressure and mA loop calibrator with full temperature compensation from -20 to 50°C. You can count on the same accuracy when measuring pressure, current, voltage, or temperature. Each unit includes P/N 2368 Test Lead Set Lead Set Red and Black Test Leads with Clamps P/N 5251 Protective Case Skydrol™ Resistant Protective Case P/N 3951 Mini-USB Cable Rugged and high-speed Micro-USB cable provides data transfer transition in the most convenient form MPM-1/4MPT CPF male to 1/4 NPT male fitting

Price: $1.573 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Value Incentive Package LIMITED TIME ONLY! Calibrator-like functions: milliamp, voltage, RTD, T/C, and frequency measurements Multimeter-like: AC/DC voltage, resistance, and continuity Digital precision with analog simplicity—speed-sensitive digital potentiometer for quick adjustments. ±0.025% typical accuracy — Accuracy to 0.02 mA, V or Hz, 1 degree C and 0.3 Ω Readings and sources Standard process signals — degrees C and F, mA, % 4 to 20, V, mV, Ohm, Hz and CPM Easy-to-Learn - Easy-to-use: simple operation without menus User-configurable Quik-Chek switch - set to any scale and zero minimum and maximum Tracking - instant recall of highest and lowest measurements Standard alkaline batteries Type AA - Long battery life with quick battery change Luxury accessories included - Carrying case with neck strap for hands-free viewing FREE 70 pcs socket set FREE Green Calibration Label Pack Save over $300! > Each unit includes six AA alkaline batteries Manufacturer's Declaration of Calibration Methods Luxury case for hands-free operation Three-year warranty Universal test lead set Shielded banana plugs and test leads Alligator clips Test probes Flat tips Operator's manual FREE Set of 70 sockets FREE calibration labels

Price: $1,539 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. The DPI 800 Series is a complete suite of advanced, reliable and easy-to-use hand tools These highly cost effective tools are ideal for testing/calibrating many popular process parameters Advanced features and technical innovations allow you to do more in less time and deliver high efficiency results, you can rely on The DPI 800 pressure indicator is the ideal instrument for measuring pressure Pressure ranges from 25 mbar to 700 bar, including vacuum options Comprehensive accuracy can be relied upon year after year, even under difficult environmental conditions Ranges from 25 mbar to 700 bar Configuration single or dual range Pressure check and maintenance Transmitter calibration Loop tuning and diagnostics Switch check

Price: $1,522 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. FREE Calibration Fitting Kit FREE C-101 Case FREE Industrial Test Lead Kit Built-in pump with media protection Helps protect the pump from fluid contamination and allows pumps to be serviced in the field Percentage error calculation for faster acceptance mA class accuracy (0.015%) for better measurement confidence and workload coverage Min/max/hold functions Capture changing measurements Test switching function for faster, more accurate test results 1, 30, 100 ohm and 300, 718 ranges for better workload coverage Nine 717 pressure ranges from 0 to 1 PSI up to 5,000 PSI 700PXX pressure modules extend measurement ranges Supported pressure units, psi inch, inches w.c. (20 °C), bar, mbar, kPa, inHg Art., mm Hg Each unit includes a FREE set of calibration fittings FREE C-101 case FREE set of industrial test leads Protective yellow case TL75 test leads and AC720 test clips User manual

Price: $1,471 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 0 to 5000 psi in. (0 to 340 bar), (0 to 34 MPa) Compatible media: Type 316 stainless steel Displays pressure readings in any of 10 different pressure units specified in the Calibrator settings. A rugged molded urethane housing protects the module from rough handling. operation and harsh environments Internally temperature compensated from 32°F to 122°F for full accuracy Includes NIST traceable calibration certificate Module can be used with any Fluke 740, 750 or compatible 720 or 710 Series calibrator Reference grade modules have an overall accuracy of 0.015 % Module has its own serial number for independent traceability Includes a set of adapters with each module 3-year warranty Each device includes a NIST-Traceable Calibration Certificate Adapter set with each module 3-year warranty

Price: $7,823 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Capabilities Multi-functional capabilities: electrical, frequency, temperature and pressure Optional HART and Foundation Fieldbus communicators ATEX and IECEx approved for use in hazardous areas Modular concept with rerange and expandability Individual components can be used as stand-alone instruments Significantly reduces inventory Simplifies training and improves safety operator Reduces cost of ownership High resolution touchscreen display and user interface (UI) with gesture and scrolling support for a flatter menu structure and greater ease of use ATEX and IECEx, for use in zones 1 and 2 classified as hazardous. INFORMATION INTERFACE PANEL for quick launch of applications such as CALIBRATOR, HART and Foundation Fieldbus. and valve positioners. The most frequently used and user-customizable tasks can be added to FAVORITES. All components of the first generation DPI620 and the new components of the Genii system are fully interchangeable. pressure stations, pressure modules and all accessories

Price: $7,173 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Reference dry-well, -40°C to 160°C, H insert, 220V Reference level performance for accuracy, stability, and uniformity Fast temperature measurement Dual-channel RTD and thermocouple readings and task documentation Full HART communicator Optional external temperature monitoring Support Wi-Fi and Bluetooth Color touch display Quick connectors (PC option) Reference reference control Self-calibration function Optional TPW kit for built-in auto implementation (ADT878-160 only) Built-in auto-annealing function (ADT878 -700 only)

Price: $27,702 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 500 to 60,000 psi inch or 40 to 4000 bar or 4 to 400 MPa or 40 to 4000 kgf/cm2 Standard accuracy is 0.02% of reading Standard weight Series 3 material non-magnetic, austenitic, stainless steel Weight density 7.8 g/cm3 Piston material Nickel bonded tungsten carbide Cylinder material Cobalt bonded tungsten carbide Thermal expansion coefficient 11 ppm/°C Test port adapters 9/16 18 UNF (autoclave), 3/8 BSP, 1/2 BSP and 3 /4 BSP Instrument weight 66 lbs. (30 kg) Instrument base only Instrument size 18" X 13.5" X 19" (455 X 340 X 478 mm) Tank capacity 235 cu. cm (14.3 cu in) Gain 7 to 1 Seal materials Nitrile Fluid Dioctyl Sebacate (DOS), our reference 55-600

Price: $11,226 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Pressure generated by a built-in pump and automatically adjustable from 90% vacuum to maximum pressure. Pressure measured by external pressure modules (ADT160 series) up to 10,000 psi inch (700 bar). auto start Auto step User friendly interface Intuitive icon-driven menu structure Measure mA or V with 0.01% RD accuracy 0.005% of full scale accuracy Source 0 to 22 mA current connectors 7 LCD color screens (800X480) Task management capability Internal memory stores 120 tasks Task upload and result upload Support for HART instruments Battery life up to 8 hours between charges External pressure system leak test to determine the magnitude of pressure fluctuations due to Leakage Special piping design to prevent possible blockage and leakage. marriage certificate included

Price: $9,576 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Pressure ranges up to 20,000 psi in. (1,400 bar) Accuracy better than 0.015% of reading (0.008% improvement option) Mineral oil and distilled water models Two-piston models allow calibration over a wide psi range. in., bar, kgf/cm2, kPa and MPa Dual piston models available for calibration over a wide range of pressures Integrated lever-type hand pump now standard on all hydraulic models Installed spirit level and adjustable feet High quality screw press for precise pressure control Test bench design o-ring station eliminates the need for teflon tape or wrenches Acrylic reservoir provides visibility into fluid level and quality Improved housing with spring-loaded lid latches Integrated drain plug to remove old fluid Sturdy cargo box with hinged lid and side handles for easy transport

GE VSCAN VERSION 1.2 H45571CC PORTABLE POCKET ULTRASOUND SYSTEM ( COMPLETE )

A thermocouple is formed by welding two different conductive wires together at the end. The boiling point is called a hot spot, and the two extremes that remain open are called cold spots (or reference points). The existence of a voltage of mV, also called the thermoelectric voltage or Seebeck voltage, which is proportional to the temperature difference between these two points, has made thermocouples widely used in temperature measurement. Regardless of the temperature distribution between the hot point and the cold point of the thermocouple, the generated voltage is proportional to the temperature difference between the hot and cold points.

Pulsometer - a device that determines the following indicators: - The degree of blood oxygen saturation; - Heart rate; - Perfusion index. The level of blood oxygen saturation (Saturation) is a very important indicator for diagnosing coronavirus and pneumonia! Using a certified oximeter (a device for measuring saturation), you can quickly and accurately determine the drop in your normal blood oxygen content and take action. Remember that we recommend measuring the oxygen content in the blood on the middle finger. Finger saturator is a great birthday present for mom, grandma, grandpa, dad. Keep track of your health with a blood oxygen measuring device (pulse oximeter) for men, women, children, teenagers, grandparents. Measure the level of oxygen in the blood everywhere! tags: finger heart rate monitor, finger oxygen meter, sports electronics heart rate monitor, accessories, home

Incorporated in the TABER V-5 Stiffness Tester is a bi-directional pendulum weighing system. Providing an accurate and responsive method for measuring small load increments, this system is a critical component for determining material stiffness or resiliency. Nine (9) distinct ranges permit testing of materials that are extremely lightweight and flexible (such as cellophane or thin metallic foils) to items that are very rigid (such as plastics).For test ranges 2 - 9, specimens are mounted on the Taber V-5 Stiffness Tester using a clamping system. Located on the pendulum, the lower faces of the specimen clamp jaws are exactly on the center of rotation. This ensures a constant test length and deflection angle for accurate and repeatable results. Both jaws of the specimen clamp are adjustable, so the test specimen can be positioned precisely in the center regardless of material thickness. Force is applied to the lower end of the specimen by a pair of rollers. The rollers, which are attached to a driving disc located directly behind the pendulum, push against the test specimen and deflect it from its vertical position. The pendulum applies increasing torque to the specimen as it deflects further from its original position. The test point reading occurs when the pendulum mark aligns with the appropriate driving disc mark (7 1/2° or 15°), which points to the stiffness reading on the dial point. The final reading will depend on the range in which the test is being conducted and what scaling factor to use. The instrument outputs the moment load applied to the test specimen in TABER Stiffness Units (g · cm).Note: The right hand roller includes a ratchet stop mechanism that greatly reduces the potential for inter-operator error caused by over or under-tightening. The travel on the right hand assembly automatically stops when the roller contacts the specimen.To allow the testing of materials with different stiffness properties, range weights can be applied to the pendulum. For extremely light weight materials, a compensator range weight is mounted to the top of the pendulum. Range weights of 500, 1000 and 2000 "Taber Units" are mounted to the bottom of the pendulum and required for stiffer materials. An optional range weight set of 3000 and 5000 Taber units is required for test ranges 7, 8 and 9.Range 1 is used with Taber's optional Sensitivity Range Attachment (also referred to as SR or High Sensitivity Attachment) to test extremely lightweight and flexible materials whose Taber Stiffness Unit value are between 0 - 1. Examples include cellophane, natural fibres and synthetic filaments, tissue paper, metallic foils, films, etc. The attachment includes two parts, the Driven Pins Holder which is secured between the clamp jaws, and the Driving Pins Holder which is mounted to the studs in place of the left and right hand rollers. Both parts include precision pins that are oriented horizontal to the face of the V-5 Stiffness Tester. A specimen 1 1/2" x 1 1/2" is mounted such that the second and fourth pins are above the specimen. As the driving disc rotates, the fourth pin of the Driving Pins Holder pushes down on the specimen while the first pin pushes up. As the sample is deflected, the Driven Pins Holder aligns the pendulum to the appropriate stiffness value. For Range 1, the specimen is only deflected to the right.Many customers have also utilized the Taber V-5 Stiffness Tester to evaluate wire and cable stiffness characteristics. The tester now incorporates a "v-notch" in the clamps to accommodate this testing. Suggested samples are 70mm long and 3mm - 8mm in diameter, and centered in the notch with care so as to not pinch or crimp the sample. For wire and cable samples less than 3mm diameter, it is recommended to secure the sample at a location in the flat region of the clamp. Samples with curvature may interfere with proper set-up and function of the Stiffness tester and should be avoided. In addition, test results obtained should be used for comparison only - that is, between lots, between materials, etc.

Incorporated in the TABER V-5 Stiffness Tester is a bi-directional pendulum weighing system. Providing an accurate and responsive method for measuring small load increments, this system is a critical component for determining material stiffness or resiliency. Nine (9) distinct ranges permit testing of materials that are extremely lightweight and flexible (such as cellophane or thin metallic foils) to items that are very rigid (such as plastics).For test ranges 2 - 9, specimens are mounted on the Taber V-5 Stiffness Tester using a clamping system. Located on the pendulum, the lower faces of the specimen clamp jaws are exactly on the center of rotation. This ensures a constant test length and deflection angle for accurate and repeatable results. Both jaws of the specimen clamp are adjustable, so the test specimen can be positioned precisely in the center regardless of material thickness. Force is applied to the lower end of the specimen by a pair of rollers. The rollers, which are attached to a driving disc located directly behind the pendulum, push against the test specimen and deflect it from its vertical position. The pendulum applies increasing torque to the specimen as it deflects further from its original position. The test point reading occurs when the pendulum mark aligns with the appropriate driving disc mark (7 1/2° or 15°), which points to the stiffness reading on the dial point. The final reading will depend on the range in which the test is being conducted and what scaling factor to use. The instrument outputs the moment load applied to the test specimen in TABER Stiffness Units (g · cm).Note: The right hand roller includes a ratchet stop mechanism that greatly reduces the potential for inter-operator error caused by over or under-tightening. The travel on the right hand assembly automatically stops when the roller contacts the specimen.To allow the testing of materials with different stiffness properties, range weights can be applied to the pendulum. For extremely light weight materials, a compensator range weight is mounted to the top of the pendulum. Range weights of 500, 1000 and 2000 "Taber Units" are mounted to the bottom of the pendulum and required for stiffer materials. An optional range weight set of 3000 and 5000 Taber units is required for test ranges 7, 8 and 9.Range 1 is used with Taber's optional Sensitivity Range Attachment (also referred to as SR or High Sensitivity Attachment) to test extremely lightweight and flexible materials whose Taber Stiffness Unit value are between 0 - 1. Examples include cellophane, natural fibres and synthetic filaments, tissue paper, metallic foils, films, etc. The attachment includes two parts, the Driven Pins Holder which is secured between the clamp jaws, and the Driving Pins Holder which is mounted to the studs in place of the left and right hand rollers. Both parts include precision pins that are oriented horizontal to the face of the V-5 Stiffness Tester. A specimen 1 1/2" x 1 1/2" is mounted such that the second and fourth pins are above the specimen. As the driving disc rotates, the fourth pin of the Driving Pins Holder pushes down on the specimen while the first pin pushes up. As the sample is deflected, the Driven Pins Holder aligns the pendulum to the appropriate stiffness value. For Range 1, the specimen is only deflected to the right.Many customers have also utilized the Taber V-5 Stiffness Tester to evaluate wire and cable stiffness characteristics. The tester now incorporates a "v-notch" in the clamps to accommodate this testing. Suggested samples are 70mm long and 3mm - 8mm in diameter, and centered in the notch with care so as to not pinch or crimp the sample. For wire and cable samples less than 3mm diameter, it is recommended to secure the sample at a location in the flat region of the clamp. Samples with curvature may interfere with proper set-up and function of the Stiffness tester and should be avoided. In addition, test results obtained should be used for comparison only - that is, between lots, between materials, etc.

The IQ150 is programmed to display clearly worded prompts which allows operators to not need instructional manuals.The IQ150 measures density and computes density difference, dot area, and dot gain. The densitometer simultaneously displays all the filters densities showing the major filter in large lettering. The IQ150 Densitometer, engineered with the latest in software technology, is so easy to use that an operator's manual isn't even needed! Yet, the affordable IQ150 fulfills your press and pre-press quality control needs with precision. It quickly and easily computes the main densitometric functions: density, density difference, dot area and dot gain. The IQ150 Densitometer has proven itself an indispensable workhorse for printers. No other portable densitometer available today can offer so much, so consistently, at so reasonable a price. Available functions: Density, Density Difference, Dot Area and Dot Gain. Simultaneous display of all filter densities: Shows the major filter value in large characters; the three minor values are shown smaller. Plainly worded, self-guiding prompts: Simple directions appear on the display; no complicated operating instructions or training manuals to study. Large, high-contrast display area: Easy-to-read display can be viewed from virtually any angle. Murray-Davies and Yule-Nielsen dot area calculations: Switch between equations at the touch of a button. Convenient one-hand operation: All densitometric functions are quickly and easily accessed through one button. Automatic turnoff: Saves battery by shutting off after 90 seconds of non-use. Several thousand readings per battery charge: Also runs from the A.C. adapter/charger. RS-232 output port: Use with a printer for reports, or a computer for analysis or data storage. Selectable manual or automatic transfer. Easy software calibration: Eliminates trial-and-error screwdriver adjustments. Available in French or Spanish: Displays all user prompts in the selected language.

The TBX1000C insures consistent process control in the manufacturing of films, laminates, and substrates. It measures density and density difference of either color or black and white substrates. Single-Step measurement of Color, UV, or IR Transmission Optical DensityThe TBX1000C(tm) Color Transmission Densitometer insures consistent process control in the manufacture of films, laminates, and substrates. The TBX1000C, with Status A (Status M on request), measures density and density difference of either color or black & white substrate with a great degree of accuracy and precision. Status A is used for reading positives, such as transparencies and prints. Status M for reading negatives. The unit has the capability of reading up to three color filters, plus visual. Custom filter set, including for measuring infrared and ultraviolet, can be used. The different filters are easily selected by rotating the knob at the end of the probe. The unit has both an absolute mode and a relative mode, which can be used for comparing the measured values to a previously stored value for consistent process control. Transmission Densitometer/Opacity Meter measures and calculates percent opacity, percent transmission, and transmission optical density. There is no more need to figure the percentages manually. The unit has been designed for user convenience and error-free measurement. The data can be uploaded to a spreadsheet via the USB port using an optional data transfer program (p/n A2128). Measures density and density difference Use for color or black & white substrates Soft key menu operation 7.5 inch throat to measure large samples Accurate repeatable readings Software Calibration Switchable LED table lamps Takes RGB readings using Status A filter set Status M and custom filters upon request Easy selectable filters USB port Data capture program available.

This table top densitometer displays transmission percent opacity and optical density. Single-Step measurement of %Opacity, %Transmission, and Transmission Optical Density The Tobias TBX2000™ Transmission Densitometer/Opacity Meter measures and calculates percent opacity, percent transmission, and transmission optical density. The unit has been designed for user convenience and error-free measurement. There is no more need to figure the percentages manually. The data can be uploaded to a spreadsheet via the USB port using an optional data transfer program (p/n A2128). To meet special requirements an optional filter carrier may be used allowing supplementary filters to isolate a portion of the spectrum that may be of interest.The TBX2000 has been designed for user convenience and error-free measurement. Table illumination facilitates film placement and the entire operation requires only one hand, leaving the other free for note taking or sample repositioning.Plastic materials are easily read where both the percent opacity and the percentage of light that is not transmitted through the material can be displayed. The unit can also display the density values when required. The unit has both an absolute mode and a relative mode, which can be used for comparing the measured values to a previously stored value for consistent process control. Soft key menu operation 7 inch throat to measure large samples Readings are very repeatable with a large degree of accuracy Calculates opacity and transmission percentage values automatically Can display the density values. USB port standard Software calibration Optional band pass filter Switchable LED table lamps Cost effective and affordable quality control system

These table top densitometers display transmission density and density difference. The TBX1500 also calculates positive and negative dot areas. Single-Step measurement of Transmission Optical Density and Optical Dot Area The Tobias TBX1000™ and TBX1500™ Transmission Densitometers measures transmission optical density. The TBX1500 also calculates positive and negative dot area. The unite have been designed for user convenience and error-free measurement. The data can be uploaded to a spreadsheet via the USB port using an optional data transfer program (p/n A2128). To meet special requirements an optional filter carrier may be used allowing supplementary filters to isolate a portion of the spectrum that may be of interest. The TBX1000 and TBX1500 have been designed for user convenience and error-free measurement. Table illumination facilitates film placement and the entire operation requires only one hand, leaving the other free for note taking or sample repositioning. The unit has both an absolute mode and a relative mode, which can be used for comparing the measured values to a previously stored value for consistent process control. B&W transmission densities Calculates positive and negative dot area (TBX1500) Soft key menu operation 7 inch throat to measure large samples Readings are very repeatable with a large degree of accuracy USB port standard Software calibration Optional band pass filter Switchable LED table lamps Cost effective and affordable quality control system

Digilent Analog Discovery 2: 100MS/s USB Oscilloscope, Logic Analyzer, Pwr Sup... Never Used

Shipping and transportation are not included in the price.

Kit: NuFlo EZ-IN 1 “x2” liquid turbine flowmeter with 6-vane rotor (1 "size, connection: mating with any 2" flange), magnetic sensor for reading the number of passes of blades and NuFlo ™ Flow Analyzer MC-III ™ EXP Explosion Proof Analyzer, manufactured by Cameron. Applications: Turbine meters with a variety of end connections and level of accuracy have the following areas of application: • Measurements when ordering water • Heat treatment plants • Metering and operational separators • Utilization wells • Carbon dioxide injection • Fuel and feed water for steam generators • Liquid dosing Fertilizers • Metering the flow of water, fuel and chemicals in the field • Loading and unloading tanks for chemical products • Metering the consumption of liquid propane • Underground mining and ore leaching * NuFlo MC-III EXP Explosion Proof Analyzer NuFlo Series MC-III ™ EXP Flow Analyzer ™ (Explosion-Proof Extended Display Transmitter) is unmatched as a state-of-the-art, easy-to-use totalizer for liquid and gas flow measurement and data logging, using Modbus communication protocol and equipped with an explosion-proof housing. The MC-III EXP analyzer is capable of storing a large amount of flow information and transmitting it faster than any other flow analyzer on the market. This highly efficient instrument records up to 384 daily data blocks, 768 hour data blocks and 345 event data blocks and can transfer them to a computer in less than a minute using the Modbus® communication protocol! Frequently used operations can be accessed from the front panel six-button keypad or from the dynamic interface software for quick and easy unit calibration and set-up. * Cameron magnetic paddle travel sensor. All can be purchased separately as spare parts. The total cost per kit is $ 3800. When buying the whole lot, 20% discount. Separately, we will consider it personally. A total of 132 sets of 2018. Everything is new in the package. Prices are individually in dollars with VAT per unit. turbine transducer, liquid series NuFlo EZ-IN 1 "x2" - $ 1710, NuFlo MC-III EXP Explosion Proof Analyzer Flow Analyzer - $ 2160, Magnetic Sensor - $ 75.

new vortex flowmeter Proline Prowirl F 200 from Endress + Hauser, manufactured in November 2018, at factory price. Attorney with passport and certificates. Proline Prowirl F 200 Vortex flowmeter Measuring tube made of stainless steel Steel CF3M, Connection DN100, PN40, 1/4404 / F316L EN1092-1-B1 (DIN 2501) flange, 3-point calibration, basic version, ATEX certificate II2G + IECEx Z1 Ex d (ia) IIC Z = Zone, Compact, aluminum, IP67 NEMA4X, M20 cable gland (EEx d: M20 thread), 2 line display; within 4-20 mA HART + pulse-frequency. The flowmeter is included in the register of GSI RK, completed with a certificate of type approval or metrological certification, a valid verification certificate, Year of issue 10. 2018. Prowirl F is a multi-variable flowmeter with integrated wet steam detection. Designed for steam applications and also provides the highest measurement accuracy for gases and liquids in auxiliary processes. Thanks to its unique 2-wire technology, Prowirl F 200 enables cost-effective and easy integration into existing infrastructures. The device also guarantees high operational safety in hazardous areas. Heartbeat Technology ensures continuous process safety

flowmeter manufactured by Siemens 7ME6310-3MF12-2JE1 in the amount of 3 pieces. Year of release 2018. Du80, Ru40. for acidic environments. SITRANS FM MAG 3100 electromagnetic flowmeter sensor (not described) DN80, 3 INCH EN1092-1, PN40 FLANGES CARBON STEEL ASTM A 105 COATING 150MICRON EPDM HASTELLOY C-276 MAG 6000, IP67 / NEMA 4X / 6, CASE, POLISH 115-230V AC 50/60 HZ MODBUS RTU / RS 485 METRIC TERMINAL BOX IN POLYAMIDE OR COMPACT 6000 I.

Counter: turbine, wafer type, EZ - IN series, 1 "x2". Turbine flowmeter, liquid, wafer type, EZ-IN type (device size 1 ", connections: mating with any flange 2"). there is no installation kit for the flow meter. Quantity 132 pieces . 2018 year . ASSY, FLOW ANALYZER, MC-III EXP, LITH PWRD (EXP 9A-50165003 & WP 9A-50165009) 9A-50179024   Part No: 2296694-01; Rev 03 SN : 12112455603 CAMERON USA 03/15/18 The NuFlo ™ Series MC-III ™ EXP Flow Analyzer (Explosion-Proof Extended Display Digitizer) is unmatched as a state-of-the-art, easy-to-use totalizer for liquid and gas flow measurement and data logging using Modbus communications and an explosion-proof enclosure. The MC-III EXP analyzer is capable of storing a large amount of flow information and transmitting it faster than any other flow analyzer on the market. This highly efficient instrument records up to 384 daily data blocks, 768 hour data blocks and 345 event data blocks and can transfer them to a computer in less than a minute using the Modbus® communication protocol! Frequently used operations can be accessed from the front panel six-button keypad or from the dynamic interface software, making it quick and easy to calibrate and tune the unit.   NUFLO EZ-IN Series Turbine Flowmeter Part No: 9A-100062997, Rev 03 ASSY, FM, 1 / 2IN, EZ-N, STD P / N 9A-100005115 a / n Meter SN:   12114198404 CAMERON USA 04/26/18 Max VIP = 25.5MPa Max T = 121 0 C Turbine flowmeters Cameron NuFlo liquid   with EZ IN® end connections with 6 vane rotor (1 "size, connection: mating with any 2" flange). NuFlo Liquid Turbine Meters   are a tool for accurately calculating the flow rate of a fluid flowing through a pipeline. NuFlo Series Turbine Meters indicate flow rate and measure the total volume of fluid flowing through the pipeline. When the liquid flows through the flow meter and the flow around the rotor, the latter rotates with a frequency directly proportional to the flow rate. The movement of the rotor blades is sensed by a magnetic sensing element that generates a sinusoidal electrical signal. This signal is transmitted to indicating measuring devices. Areas of use:   Turbine meters with a variety of end connections and level of accuracy have the following applications: • Measurements when ordering water • Installations for heat treatment • Metering and operational separators • Utilization wells • Carbon dioxide injection • Fuel and feed water for steam generators • Dosing of liquid fertilizers • Measurement of consumption of water, fuel and chemical products in factory conditions • Loading and unloading chemical tanks • Accounting for the consumption of liquid propane • Underground mining and ore leaching     Part Number: 9A-100002077 Rev G Pickup, Nuflo, 7/8, THRU, 8 INCH Cameron 9 A -100002077 Flowmeter Magnetic Pickup Pickup Cameron Nuflo MV-100005111, 9A-100005111 Flow Analyzer Battery Voltage: 3.6 Volts Capacity: 17.0 Ah Chemistry: Lithium-Thionyl Chloride Termination: BA (Button Top - Pressure Terminals) LS33600-CN battery for Cameron Nuflo MC-II plus MC-III, MV-100005111, 9A-1000051

Product Name: Infrared Thermometer Non-touch measurement High precision infrared sensor Practical patent design High definition display 32 groups memory recall

Gas meter "Prince-M" G40 measures the volume of consumed gas up to 65 m³ / h, at a temperature range from -40 to +60 ° С, is used as part of commercial gas metering units, in mobile boiler houses, apartment buildings for access and house gas metering ... The built-in thermocorrector, as well as telemetry of the development and production of the meter manufacturer, allows them to be installed in metering units where accurate readings of the reduced gas volume and remote data collection are required. All devices are guaranteed for 6 years. Maximum working pressure up to 5 kPa. The meter can be used to measure gas in centralized low pressure networks, as well as after the reduction gearbox of gas holders. The design of the device has small dimensions and weight up to 1.2 kg, there are no moving parts, additional maintenance of the gas meter is not required. Pre-installed nuts on DN 50 nozzles allow the meter to be mounted directly on the pipeline. Gaskets are included.