Machine Tool Equipment and Parts in bulk on Qoovee

Aluminum torch holder with collision control and torch breakage prevention in a collision. The cutter is fixed in a special holder with a spring suspension and sensors. In the event of a collision of the torch with an obstacle, sensors are triggered, and the torch itself with a clip moves to the side. The set includes a plastic adapter sleeve for a cutter D = 34mm. The sensors are not included in the kit.

Aluminum torch holder with collision control and torch breakage prevention in a collision. The cutter is fixed in a special holder with a spring suspension and sensors. In the event of a collision of the torch with an obstacle, sensors are triggered, and the torch itself with a clip moves to the side. The set includes a plastic adapter sleeve for a cutter D = 34mm. The sensors are not included in the kit.

Torch holder with magnetic collision avoidance of torch breakage. Designed for installation of oxy-fuel or plasma cutting torch with a diameter of 35 mm. The presence of a magnetic mount prevents the torch from breaking if it hits an obstacle.

Torch holder with collision avoidance device. Designed for installation of oxy-fuel cutting torch or plasma cutting torch with a diameter of 30-35 mm. The presence of springs prevents the torch from breaking if it hits an obstacle.

Plasma torch height controller. Torch height control - by arc voltage. Power supply 24V. Accuracy 0.1mm. UP / DOWN outputs to CNC controller. Direct control of the 24V electric motor of the Z-axis drive. Manual setting and adjustment of parameters.

Z-axis module with torch holder, THC unit and electric drive on a stepper motor (similar to SH-HC30). Designed to operate on a CNC plasma or gas cutting machine. Compatible with stand-alone CNC controllers or MACH3. Torch height control - by arc voltage or capacitive.

Oxy-fuel torch height controller, upgraded version of CHC-200. Torch height control - capacitive. Power supply ~ 24V. Accuracy 0.1mm. UP / DOWN outputs to CNC controller. Direct control of the 24V electric motor of the Z-axis drive. Manual setting and adjustment of parameters.

Plasma torch height control module with Ethernet interface for MACH3. High voltage, measured voltage up to 200V. The module is compatible with HT plasma cutters, operation with other plasma cutters is not guaranteed.

The ohmic sensor is designed to locate the workpiece and detect collisions with metal during the plasma cutting process. The sensor is designed to work with Hypertherm products only. The sensor has high accuracy due to the ability to adjust the sensitivity, is equipped with a trigger indication and an opto-isolated trigger signal output. Supply voltage 12V.

New generation universal plasma torch height control module with Ethernet and UP / DOWN interface. Works with any plasma cutter, has both high-voltage and low-voltage inputs. Supply voltage 220V. Includes controller module and divider module.

Automatic ignition systems are designed for automated ignition of gas in the torch in automated gas cutting machines on command from the machine control panel.

Safety flame arrestor check valves are designed to provide safety in the event of an accident. The check valve allows gas to pass in one direction, and does not let it pass in the other direction - in case of ignition - the fire will not go along the route. A flame extinguishing element is also built into the valve. Please note that on gas lines (red), the threads are left-handed, on oxygen lines (blue), the threads are right-handed.

Reducing fittings are installed on an oxy-fuel torch or other gas fittings to connect hoses with gas and oxygen.

Replaceable copper nozzles of various diameters for oxy-fuel torches for acetylene and propane cutting are presented. Ranges of thickness and cutting speed are indicated.

Gas torches with in-nozzle mixing of gases - acetylene or propane with oxygen. Please note that torches are supplied without a nozzle and without hose adapters. Nozzles and fittings must be purchased separately. Please note that on gas lines (red), the threads are left-handed, on oxygen lines (blue), the threads are right-handed.

2-axis rotary axis for 5-axis machining. Belt reducers 1: 6 and 1: 8, three-jaw chuck K11-100 + working table 100x125mm, stepper motors analogue of PL57H76. Height to center 98mm. Faceplate beats up to 0.1mm are possible, cartridge beats up to 0.2mm are possible.

Rotary axis - reduction 1: 3, belt reducer, three-jaw chuck K11-100, stepper motor analogue PL86. Height to center 65mm. Faceplate beats up to 0.1mm are possible, cartridge beats up to 0.2mm are possible.

Rotary axis - reduction 1: 6, belt reducer, three-jaw chuck K11-100, stepper motor analogue of PL57. Height to center 65mm. Faceplate beats up to 0.1mm are possible, cartridge beats up to 0.2mm are possible.

Rotary axis - reduction 1: 6, belt reducer, three-jaw chuck K11-80, stepper motor analogue of PL57. Height to center 65mm. Faceplate beats up to 0.1mm are possible, cartridge beats up to 0.2mm are possible.

Wired control panel for CNC machine, wire length 1.5m-5m. Control of 6 axes of the machine, resolution of the encoder MPG 100PPR, control of the pulse multiplier * 1, * 10, * 100. E-Stop button and start button. Supply voltage 5V, differential encoder output on 26LS31.

Wired control panel for CNC machine, wire length 1.5m-5m. Control of 6 axes of the machine, resolution of the encoder MPG 100PPR, control of the pulse multiplier * 1, * 10, * 100. E-Stop button and start button. Supply voltage 5V, differential encoder output on 26LS31.

Wireless remote control for CNC machine, compatible with CNC system NCStudio 5.x.x and 8.x.x. Not compatible with MACH3. Control of 3 axes of the CNC machine, line-of-sight range 60m. Supports up to 64 devices in one room. Power supply 2 AAA batteries, 6 months MAX.

Wireless remote control for CNC machine, compatible with CNC system NCStudio 5.x.x. Not compatible with MACH3. Control of the 3rd axes of the CNC machine, line-of-sight range 15m. Supports up to 32 devices in one room. Power supply 2 AAA batteries, 2 months MAX.

Wireless remote control for CNC machine, only compatible with MACH3. Operating range 40m, 2.4GHz ISM wireless data transmission standard with anti-jamming algorithm. Controls 4 axes of a CNC machine, the encoder resolution is MPG 100PPR. The remote control is powered by two AA batteries.

Wireless remote control for CNC machine, compatible with CNC system NCStudio 5.x.x and 8.x.x. Not compatible with MACH3. Operating range 15m, 2.4GHz ISM wireless data transmission standard with anti-jamming algorithm. Controls 4 axes of a CNC machine, the encoder resolution is MPG 100PPR. The remote control is powered by two AA batteries.

Wired control panel for CNC machine, only compatible with MACH3. Operation via MODBUS via COM-port (in the set USB <> COM adapter), powered by USB. 4-axis control, spindle and E-Stop.

Industrial wired control panel for CNC machine, cable is self-assembled (via DB-25 connector and cable-entry). Control of the 4th axes of the machine and the pulse multiplier * 0, * 1, * 10, * 100. Manual pulse generator type MPG60-100-5E. 5 user-definable buttons and 2 LEDs, E-Stop button. The console body is made of aluminum, so the console is shockproof and lightweight.

CNC machine control panel with Ethernet interface. It is connected to a PC and integrated into the CNC program Mach3 via a plugin. The console allows you to control 4 axes of the CNC machine using a rotary encoder and buttons. The panel regulates the spindle speed, has 7 customizable buttons and 7 customizable LEDs for indicating operating modes. The device is powered from the USB port through a special power injector (included in the package).

Wireless sensor for finding tool height along the Z axis in automatic mode. Compatible with MACH3, LinuxCNC, etc. Automatic frequency changeover with anti-interference algorithm allows the sensor to operate in industrial environments with a high level of noise. One set of AAA batteries * 2pcs. the sensor can work for more than 6 months.

Wired measuring probe (touch sensor, CNC scanner) is designed for automatic positioning of the cutting tool and contact scanning of objects on a CNC machine. Easy to use, highly accurate and bounce-proof. Mounted in the spindle collet. Compatible with MACH3, LinuxCNC and professional machining centers

The sensor is designed to set the tool height along the Z axis in automatic mode. Anti-bounce and magnetic base for easy mounting on the machine. Compatible with MACH3, LinuxCNC, etc.

The sensor is designed to set the tool height along the Z axis in automatic mode. Compatible with MACH3, LinuxCNC, etc.

The bath is installed on the working table of the PLRA3 CNC machine and prevents coolant from entering the gears and guides of the machine when processing materials using coolant. The design of the bath provides a technological hole for draining the coolant and organizing its recirculation. Also, the design provides holes for fixing the workpiece. Material - steel, powder painting.

The bath is installed on the working table of the PLRA4 CNC machine and prevents coolant from entering the gears and guides of the machine when processing materials using coolant. The design of the bath provides a technological hole for draining the coolant and organizing its recirculation. Also, the design provides holes for fixing the workpiece. Material - steel, powder painting.

Replacement needle assembly for CNC pneumatic marking machine DHQD-xxxx and pneumatic engraving head PL-SPH1.

Pneumatic engraving head for CNC machine is designed for applying marks by impact method on various surfaces - metal (steel, aluminum), plastic, stone, etc. The depth of marking is up to 1mm, depending on settings and material. The head is installed instead of the spindle on a PLRA4 CNC machine, etc.

The plotter cutting module is used for cutting plastics, vinyl, cardboard, fabric, etc. The module is installed instead of the cutter in the spindle or on the machine, instead of mounting the spindle. This mounting method allows you to use milling machines as a cutting plotter. The module accepts a standard knife holder from Roland, Graphtec or Pcut plotters (purchased separately), as a cutting knife, standard knives for cutting plotters are used.

The vane knife is used for plotter cutting of materials such as plastics, vinyl, sealing materials, cardboard, corrugated board, paper, fabric. The knife is installed instead of the cutter into a spindle with a collet, the clamping diameter of which is 6mm. This mounting method allows you to use milling machines as a cutting plotter. A standard construction knife blade is used as the blade.

Tailstock PLAT-01 is used to fix bodies of revolution made of wood, plastic, textolite and non-ferrous metals on milling machines with a rotary axis during processing. Recommended to be used in conjunction with PLAR-01 rotary axis. Specifications: Dimensions: 110 * 61 * 83mm Weight 1.25kg.

Rotary axis for CNC machine. Designed to rotate parts at different angles during processing. The reducer is made on a toothed belt drive with a gear ratio of 1: 9. 4-jaw lathe chuck K12-80, stepper motor PL57H56-D8, rotation speed 0 ... 100 rpm. Weight 6.35 kg. Specifications: Reducer: toothed belt transmission; Gear ratio: 9; Stepper motor: PL57H56-D8; Lathe chuck: K12-80; Rotation frequency: 0 ... 100 rpm; Weight: 6.35 kg; Radial and face runout of the workpiece in the chuck: 0.2mm MAX.