Textile Raw Materials in bulk on Qoovee

We suggest you consider the possibility of purchasing fabrics of our production, which are used when sewing personal protective suits.   These fabrics are made on the basis of Taffet fabric with a special polyurethane coating. This fabric complies with GB 19082-2009, has good vapor transmission and is used for sewing protective medical suits that must comply with similar international standards (e.g. EN 14126).

Компания GREENSTEP - производитель штапельного вторичного полиэфирного волокна - предлагает своим покупателям следующие виды продукции: 1) твердое волокно (регулярноизвитое); 2) полое волокно (высокоизвитое силиконизированное, не силиконизированное) Линейная плотность (толщина) волокна: 7 Дтекс, 15 Дтекс. Длина резки волокна: 34мм/ 68мм; Цвет волокна: белый, коричневый, зеленый.

Код товара: 245982Состав: шерсть 100%Тонина (мкр): 23 - 25Вес упаковки (г): 1000

FORPRINT BINDER 80 N Characteristics: Fixing agent for pigment printing The product develops resistance to washing, resistance to wet and dry friction of fabric dyeing by means of a special reaction of transverse the bond that occurs due to the acrylic structure of the product during the fixation process during printing. This colorless liquid does not contain ethyl alcohol. Chemical characterization Appearance Ionic character PH level Share Bulk Viscosity (cps): Stability Storage Polymer emulsion Acrylate / Styrene White, liquid anionic 6.0 - 8.0 ~ 1.0 & lt; 500 mPas FORPRINT BINDER 80 N is compatible with auxiliary substances used in pigment printing. Product has very good electrolyte strength. The product is sensitive to frost. Changes occur when temperatures near the freezing point. The product is sensitive to temperatures above 40 ° C. The product can be stored in its original packaging in dry cool place (5-35 ° C) within 6 months. At the end of this period, if the properties of the product checked and there are no changes in values, you can continue using the product. Properties Film properties FORPRINT BINDER 80 N creates a dry, soft and shiny film after fixation. Paint makes the pigment look matte, transparent and vibrant. How to apply Textile material FORPRINT BINDER 80 N can be applied to all types of fabrics commonly used in textile print. It is recommended to add fixed formaldehyde to increase resistance (e.g. 5.0-10.0 g / kg FORPRINT PFF 40). Commit conditions Optimal fixing conditions for best stability results are 4 - 5 minutes at 150 ° C. The crosslinking speed increases at higher temperatures. Protective film It is recommended to cover it with foil if it needs to be kept intact for some time. Value The pH of the slurry should be adjusted to 7.5-8.0 with ammonia. Also recommended filter out ready-to-print paste (?). We reserve the right to modify the product and technical leaflet. Our department for applied technique is always at your service for further information and advice. Our technical advice and recommendations given verbally, in writing or by trials are believed to be correct. They are neither binding with regard to possible rights of third parties nor do they exempt you from your task of examining the suitability of our products for the intended use. We cannot accept any responsibility for application and processing methods which are beyond our control. Fourkim Tekstil Boya ve Kimya Ürünleri San.Tic. A.Ş. Barbaros Hayrettin Paşa Mah. 1992 sok. No: 16 Vetro City D: 42 Esenyurt / İstanbul

more than 20 colors of high quality bengalin fabric ideal for women and men classic trousers

for women's trousers

gabardine recarda for school uniforms

Bengal high assortment

for womens dressing and trousers in more than 30 colors

for women's clothing

for women's clothing

Linen

for hijab and women's clothing

for women's clothing

fabrics for women's clothing