Sodium liquid glass - 32750

We offer quality caluanie muelear oxidize and ship worldwide. Caluanie is use for the crushing of metals and semi precious stones.

PURPOSE: Used for waterproofing static cracks, seams, joints, service entries, interfaces and junctions in concrete and reinforced concrete structures. DESCRIPTION: Dry, fine-grained, waterproofing, surface mixture Pk1, B30, W14, F300 “Penekrit” GOST 31357-2007. It consists of Portland cement, quartz sand of a certain granulometry, and active chemical components. ADVANTAGES: - High strength and water resistance; - High adhesion to the base; - No shrinkage; - Used in domestic and drinking water supply. Scope of application of waterproofing material Penecrit. Used for waterproofing static cracks, seams, joints, communication entries, interfaces and junctions in concrete and reinforced concrete structures. High strength and waterproof. High adhesion to the base. No shrinkage. Used in domestic and drinking water supply. Dry mixture consumption 1.5 kg/m.p. (fine 25x25 mm), with an increase in the cross-section of the fine, the consumption increases proportionally. Surface preparation. Using a wall chaser and a jackhammer, make a groove with a cross-section of at least 25x25 mm along cracks, seams, joints, utility entries, connections, and junctions. Thoroughly clean the surface from debris and loose concrete using a brush with metal bristles, moisten it generously and prime it with one layer of Penetron mortar mixture (consumption 0.1 kg/m.p.). Preparation of mortar mixture. Use clean water and containers. Mix with water in a proportion of 0.14 - 0.16 liters of water per 1 kg of dry mixture or 1 part water per 5 parts of dry mixture by volume for 2 minutes until a thick plasticine-like consistency is obtained. Use within 30 minutes, stirring regularly without adding water.

Penetron – penetrating waterproofing of concrete. The service life of penetrating waterproofing is equal to the service life of building structures. Penetron is approved for waterproofing in domestic and drinking water supplies. Penetrating waterproofing gives concrete the properties of “self-healing” cracks with an opening of up to 0.4 mm. Concrete penetrating mixture can be applied with either forward or reverse water pressure. There is no need to dry the concrete surface before applying penetrating waterproofing. The water resistance, corrosion resistance and frost resistance of concrete increases. Penetrating waterproofing maintains the vapor permeability of concrete. Purpose. Penetrating mixtures Penetron are used for waterproofing concrete and reinforced concrete structures. As a result, their water resistance increases and concrete acquires the ability to “self-heal” cracks with an opening of up to 0.4 mm. For waterproofing static seams, cracks larger than 0.4 mm and utility entries, it is used in conjunction with other materials of the Penetron system. Dry mixture consumption 0.8 - 1.1 kg/m2 when applied in two layers. Surface preparation. Before applying the penetrating mixture, the surface is cleaned to structurally sound concrete. Wet the concrete with water until it is as saturated as possible.

Penetron Admix Waterproofing additive for concrete (Penetron Admix) DESCRIPTION: Dry waterproofing additive for concrete mixture. Consists of special cement and active chemical components. PURPOSE: Used for waterproofing concrete and reinforced concrete structures by increasing their water resistance and acquiring the property of “self-healing” cracks with an opening of up to 0.4 mm. ADVANTAGES: - Increased water resistance, durability, frost resistance and corrosion resistance of concrete; - Elimination of additional waterproofing of structures/products; - Compatibility with any other additives (plasticizing, antifreeze, air-entraining, etc.); - Used in domestic and drinking water supply. Instructions for use of materials. The application temperature for the Penetron Admix additive complies with current standards at which concrete work is possible. CONSUMPTION: 1% by weight of cement in the concrete mixture or 4 kg of additive per 1 m3 of concrete mixture. METHODS OF ADDITIVE ADMINISTRATION: Introduce Penetron Admix into a concrete truck in the form of a solution in the proportion of 2.5 liters of water per 4 kg of dry additive or 1 part water to 1.5 parts dry additive by volume. Use the prepared additive solution within 5 minutes. Mix the solution in a concrete truck for at least 10 minutes at high mixer speeds. In dry form, the Penetron Admix additive is administered through the dry additive dispensers of the RBU production line. It is possible to introduce a calculated amount of additive along with inert materials. When concreting, ensure waterproofing of technological seams and joints using a waterproofing harness “Penebar” and “Metal fastening brackets”. PRECAUTIONARY MEASURES: Use rubber gloves, cotton gloves, a respirator, goggles, protective clothing made of thick fabric, boots. If the mixture gets on your skin or eyes, rinse immediately with water and consult a doctor. Technical characteristics of the additive Penetron Admix. Name of the indicator. Meaning Measurement methods. Technical characteristics of the dry additive. Moisture by weight. Not more than 0.6% GOST 8735 Bulk density 1020 ± 70 kg/m3 Technical characteristics of concrete with additive. Increasing the waterproof grade. At least 3 levels GOST 12730.5 Increased frost resistance, cycles, at least. At least 100 cycles GOST 10060.0Additional characteristics. Package. Multilayer bags (20 kg), plastic buckets (25 kg). Storage and transportation conditions. Store multilayer bags in dry rooms, plastic buckets at any humidity and temperature. Guaranteed shelf life: 12 months in multilayer bags, 18 months in plastic buckets, provided the original packaging is sealed intact.

AVG Polyurethane Foam 65 gross weight 850g, Winter / Summer.

The redispersible latex powder product is water-soluble redispersible powder, which is divided into ethylene/vinyl acetate copolymer, vinyl acetate/ethylene tert carbonate copolymer, acrylic acid copolymer, etc. The powder adhesive made after spray drying uses polyvinyl alcohol as protective colloid. This kind of powder can be quickly redispersed into lotion after contacting with water. Because redispersible latex powder has high adhesive ability and unique properties, such as water resistance, workability and heat insulation, their application range is extremely wide. Ceramic tile adhesive Adhesive mortar for external wall insulation system [1] External wall insulation system plastering mortar Ceramic tile pointing agent Self flowing cement mortar Flexible putty for interior and exterior walls Flexible crack resistant mortar Rubber powder polystyrene particle insulation mortar Dry powder coating Polymer mortar products with high requirements for flexibility.

VAE emulsion is a kind of macromolecular synthetic material, which is synthesized from polyvinyl alcohol, ethylene, vinyl acid and other raw materials. It is an excellent environmental lotion. It is mainly used in the fields of building materials, textile printing and dyeing, papermaking, coatings, adhesives, labels, and sealing materials. VAE emulsion has good adhesion, which can bond the fibers together to make them more closely combined, thus enhancing the mechanical properties of the product and improving the quality of the product. The price of VAE emulsion is relatively low, which can replace traditional paraffin and emulsion, thus reducing the product cost. At the same time, VAE emulsion has good weather resistance and water resistance, which can extend the life of the product and reduce the maintenance cost of the product. VAE emulsion can significantly improve the performance of the product, making the product have good wear resistance, tear resistance, high temperature resistance, weather resistance and chemical corrosion resistance. It is widely used in the fields of architectural coatings, wood coatings, and fiber products.

olyvinyl alcohol (PVA), with a white powder appearance, is a widely used water-soluble polymer with properties between plastic and rubber. Its applications can be divided into two major categories: fiber and non fiber. 2、 The role of polyvinyl alcohol 1. Polyvinyl alcohol has unique strong adhesion, skin flexibility, smoothness, oil resistance, solvent resistance, protective colloid properties, gas barrier properties, wear resistance, and water resistance after special treatment. 2. Therefore, in addition to being used as fiber raw materials, it is also widely used in the production of coatings, adhesives, paper processing agents, emulsifiers, dispersants, films and other products. 3. The application scope of polyvinyl alcohol is widespread in industries such as textile, food, medicine, construction, wood processing, papermaking, printing, agriculture, steel, polymer chemical, etc.

Calcium Chloride occurs as a white or colorless crystalline powder, granules, or crystalline mass and is hygroscopic (deliquescent). Calcium Chloride is often used for de-icing or dust control on gravel roads, in food or as the absorbing agent in desiccants.

For tinting oils and wax, we recommend using our tints, which easily give the desired shade while maintaining the decorative effect of the wood grain. Our unique paint and varnish coating formulations are based on natural and modified natural ingredients. The composition of Nevskaya Artel products includes such ingredients as: linseed oil, pine resin, beeswax, gum turpentine. The entire line of our wood processing products is manufactured in Russia using domestic raw materials, which eliminates dependence on imports.

soda ash is a chemical compound known as an inorganic combination of sodium and carbonate. The chemical formula of soda ash is (Na2CO3). This substance is available in solid, crystalline, powdery and odorless form and has the property of absorbing moisture. In its solid state, its soda appears as a white powder. And when sodium carbonate dissolves in water, carbonic acid and sodium hydroxide are formed.   Some common applications of sodium carbonate include:   As a cleansing agent for domestic purposes like washing clothes. Sodium carbonate is a component of many dry soap powders. It has detergent properties through the process of saponification, which converts fats and grease to water-soluble salts (specifically, soaps) It is used for lowering the hardness of water It is used in the manufacture of glass, soap, and paper It is used in the manufacture of sodium compounds like borax

soda ash is a chemical compound known as an inorganic combination of sodium and carbonate. The chemical formula of soda ash is (Na2CO3). This substance is available in solid, crystalline, powdery and odorless form and has the property of absorbing moisture. In its solid state, its soda appears as a white powder. And when sodium carbonate dissolves in water, carbonic acid and sodium hydroxide are formed.   Some common applications of sodium carbonate include:   As a cleansing agent for domestic purposes like washing clothes. Sodium carbonate is a component of many dry soap powders. It has detergent properties through the process of saponification, which converts fats and grease to water-soluble salts (specifically, soaps) It is used for lowering the hardness of water It is used in the manufacture of glass, soap, and paper It is used in the manufacture of sodium compounds like borax