ООО СМ ТОРГ

New from storage never used. The signaling device for toxic and combustible gases STG-1 is used to issue an alarm about exceeding the established values ​​​​of the mass concentration of carbon monoxide in the air and the volume fraction of combustible gases (methane or propane-butane mixture). each alarm threshold allowing to turn on (turn off) ventilation, a siren and other actuators; - connection of the DU to the BCS with a three-wire cable; communication lines DB with BKS; - convenience in operation and ease of maintenance. Sensor block for signaling devices STG1-1D10 Price for everything in the photo

Heavy duty fixed wheel support (polyurethane) 200 mm is intended for use in the production of wheelbarrows and trolleys for heavy loads. The wheel rim of the 200 mm heavy duty wheel support is based on cast iron. Fixed wheel bearings can be used in any conditions, perfectly tolerate the effects of the external environment and various chemicals, withstand temperature differences from -35 to +50 degrees. A fixed wheel bearing (polyurethane) is used where there is a need to restrict the mobility of a cart or wheelbarrow with a load. The presence of a nipple for regular lubrication will ensure long life and smooth running of the heavy duty wheel set. The fixed wheel bearing is equipped with a roller bearing. The wheel support bracket is made of steel and galvanized. Diameter of heavy duty fixed wheel (D) - 200 mm Tire width of heavy duty wheel (N) - 50 mm Height of heavy duty fixed wheel support (H) - 237 mm Width and length of the platform of the heavy-duty support, taking into account the holes (XxY) - 135x105 mm Width and length of the platform of the heavy-duty support at the centers of the anchorages (AxB) - 88x75 Hole sizes for heavy-duty wheel support (bxl) - 11x20 mm Permissible wheel load - 350 kg

Heavy duty swivel castors (polyurethane) 100 mm are used in wheelbarrows and trolleys for transporting heavy loads. Cast iron is used as the basis for the production of a rim for a heavy duty swivel wheel. The axle mechanism of the polyurethane caster is equipped with a roller type bearing. Heavy duty wheel support 100 mm is made of steel and galvanized (layer not less than 6 mm). The swivel caster (polyurethane) is equipped with a nipple for regular lubrication, which ensures a long service life of the caster. The permissible temperature limits for heavy-duty wheel bearings ranges between -35 gr. and + 50 gr. Diameter of the heavy duty wheel of the swivel support (D) - 100 mm Tire width of heavy duty wheel (N) - 50 mm Height of heavy-duty swivel wheel support (H) - 130 mm Width and length of the platform of the heavy-duty support, taking into account the holes (XxY) - 135x105 mm Width and length of the platform of the heavy-duty support at the centers of the fastenings (AxB) - 88x75 Dimensions of the holes for fastening the heavy-duty wheel support (bxl) - 11x20 Permissible wheel load - 250 kg