Vibropress of the latest generation SUMAB R 400 for the production of blocks, curbs, paving stones - 31512

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair   Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm

The giraffe sander DWS 225B in a case is an electric sander designed for sanding various types of surfaces. Mainly used for interior renovation and finishing work. Design features The working part of the Oxy DWS 225B machine is a replaceable grinding disc, which is driven by an electric motor. The device supports the installation of a disc with a diameter of up to 225mm, which is enough to perform most jobs related to grinding surfaces. The motor power is 850 W, the disk rotation speed is from 750 to 1850 rpm. The rotor speed can be set using a convenient electronic regulator on the handle of the device. The movable sanding head is mounted on a telescopic handle, the length of which can be adjusted between 110 and 180 cm. Thus, the Oxy DWS 225B sander is ideal for use in rooms with a standard ceiling height of around 3 meters.

Sicoma Mixer APM3000/2000, MPC3000/2000, Sicoma Concrete Mixer Wear Resistant Parts,Mixing Arms,Mixer Wear Plates,Mixer Blades,Mixer Liners,Professional Manufacturer,High Quality,Favorable Price

We sell SICOMA concrete mixer, professionally manufacture concrete plant mixer wear parts, SICOMA concrete mixer wear parts, BHS concrete mixer wear parts, shaft head seals, cement screw conveyor, crusher wear parts, custom size wear parts. >

We sell silcoma concrete mixer, professionally manufacture concrete mixing plant wear parts, SICOMA mixer wear parts, BHS mixer wear parts, shaft head seals, cement screw conveyor, crusher wear parts, custom size wear parts.

Automatic line for the production of bricks from the manufacturer (Cosmec). It is possible to supply a full-fledged turnkey plant, as well as individual units or components, in order to modernize your existing equipment. The composition of the line, the degree of automation and equipment may vary depending on the goals and objectives of the customer. The situation is similar with the pricing policy: the price of a line for the production of bricks can vary greatly. Therefore, when inquiring about the cost of equipment for the production of bricks, it is advisable to first take into account what your actual preferences are and whether the line meets your technical requirements (composition of the line, range of finished products, productivity, preparation of project documentation, installation supervision, degree of automation, etc. ) - only after that it is possible to set a preliminary price and real delivery times.

Equipment for the production of mineral wool, on the example of the basic model 30KA Automatic line for the production of high quality mineral wool from the manufacturer. The capacity of the recommended automatic lines varies from 8,000 tons to 60,000 tons of finished product per year or more. You can quickly contact a specialist to obtain the required information or send a request using the contact details provided on this portal. In addition to the standard supply of stone wool production equipment, the Company can provide a full range of services: from site selection, terrain layout, construction and building reference materials, equipment installation, commissioning, staff training, to the modernization of old stone (mineral) wool production lines. The cost and terms of delivery of a new automatic line for the production of stone wool, warranty obligations, as well as services for the maintenance or modernization of existing equipment are negotiated on an individual basis. At the same time, it should be borne in mind that the indicated cost is not decisive and in the process of discussing a commercial offer it can significantly (!) Change both up and down.

A mini-plant for the production of ceramic bricks is capable of not only producing high-quality bricks and / or tiles, but also has the ability to manufacture products with a significantly larger assortment than a large enterprise. The standard output is about 4 million bricks per year. This is an almost ideal option for developing a niche for the production of building materials while implementing original unique design solutions, as well as for filling the market with new and effective offers. For example, the described line is capable of producing both thin light partition blocks, and "American" (narrow brick), and facing tiles, and facing bricks with a textured surface. If you are interested in purchasing a mini-factory and you want to open the production of ceramic bricks and other building elements, use the following contact details of a specialist in charge of the CIS direction. Or, use the feedback form on the site. In order for your request not to fall into the basket and for it to receive the correct and really necessary answer, in this case, a commercial offer, we strongly recommend that you do the following and indicate in the appeal: The performance you require. Sizes of manufactured products, degree of hollowness (if necessary), strength, etc. The presence of a chemical analysis of raw materials that are planned to be used for the manufacture of products. Availability of main energy carriers and available capacities (gas, water, electricity, etc.). Address of the location and installation of the line. For whom the commercial offer should be prepared: private person (full name), organization (name).

Manufacture of sandwich panels on the example of the universal line JF100. Delivery of equipment is carried out directly from the manufacturer from China. Terms of design, installation, staff training and warranty service are negotiated on an individual basis. The considered line is offered only as a sample. In each case, productivity, quality requirements for products, range of products, degree of automation, etc. are determined based on the needs of the customer. The information is provided by a direct certified supplier authorized to act on behalf of the manufacturer in Russia and the CIS countries - HEBEI SUOFU TRADING CO., LTD. Different from the production of standard sandwich panels, the main purpose of the JF100 line is to produce a new type of sandwich panel, namely, rock wool polyurethane composite board with improved functions of fire resistance, heat preservation, thermal insulation, sound insulation, waterproof, lightness and environmental protection. The production of a new generation of sandwich panels from mineral wool and polyurethane combines the reaction technology of machine, electrical, liquid and chemical polymerization of polyurethane with mineral wool and is a fully automatic continuous production line.

Concrete batching plant is a combined plant, concrete BSU plant, used for centralized mixing of concrete, also called concrete pretreatment plant. It is highly mechanized, automated concrete batching plant and productive, guarantees the quality and output of concrete products, saves raw material and cost. Large concrete batching plants are often used for large and medium-sized water conservancy construction, power plant construction, bridge building, etc., where the concrete workload is large, the duration of work is long, and the sites are concentrated. Of course, for smaller projects, such as building houses in towns and cities, small factories, etc., you can also choose a small to medium-sized concrete plant with a smaller capacity. We have many models and configurations of concrete mixing plants, let us know your requirements and budget and we can find the most suitable concrete mixing plant for you. With the development of municipal construction becoming more and more mature, using centralized mixing and providing commercial concrete mixing plants is a great advantage, so commercial concrete mixing plants are also an investment for most customers. Commercial concrete mixing plants also create a great social environment to promote the construction of concrete pumps and the joint operation of machines for mixing, transporting and laying. All the construction parts described above are available from AIMIX!