Check availability
5.78
USD/pcs
5.78
USD
Minimum order: 50 pcs
Supply ability: 5000 pcs/per day
ООО Технотрейд-Империал
Not verified supplier
Ульяновск, Russia
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
Lider
Turkmenistan
Specify the price
USD
0
0
We offer you high-quality roofing felt - rolled roofing and waterproofing material obtained by impregnating roofing cardboard with petroleum bitumen and applying covering bitumen with filler and topping to both sides of the sheet. The product is designed to create the top protective layer of the roofing carpet and the lower layers of the roof. Euroroofing felt is also used as roll waterproofing of building elements. The material is attached to the base with bitumen or roofing mastics. ADVANTAGES OF RUBEROID - simple installation using bitumen mastics using hot or cold methods; - relatively low cost; - water resistance – complete tightness has been proven by practical tests: 72 hours, at a water pressure of 0.01 kgf/m2; - preservation of physical properties when heated to 80 degrees Celsius; - absence of swelling, delamination and loss of topping; - minimal load on rafters and roofing structures due to low weight; - versatility - the material is used not only as waterproofing, but also for wind and moisture protection of external walls; - wide selection of materials with different characteristics.
Black Gold LLC
Belarus
USD
4.36/pcs
4.36
Skate Aeruelon (Hare Figure Ribbon) LVK 240*5000 - from 400 rubles. for the pcs.; LVK 300*5000 - from 450 rubles. For pcs. The price is without VAT. Free delivery. We are looking for regional representatives.
ИП Retail in Detail
Kazakhstan
USD
56.18/pcs
56.18
Valve under-roof space aerator KRONOPLAST WPBF Under-roof space aerator KRONOPLAST WPBF is designed for installation on finished roofs made of VENICE metal tiles. A special bitumen-rubber compound provides waterproofing of the connection between the passage element and the roofing material. It is used for ventilation of the under-roof space / attic. It is mounted on roofs made of metal tiles with a wave height of up to 34 mm (profile type KRONA). Ventilation is necessary to remove excess warm and humid air. Ventilation reduces the likelihood of fungus and mold on roofing materials, which will extend their service life. The aerator is made from Austrian raw materials on German equipment. Primary plastic is used, which is resistant to UV radiation due to a special stabilizer in its composition. European quality, manufacturer's warranty. Material: polypropylene (PP) - stabilized to UV rays. Technical characteristics: * Diameter Ø150, Complete set: screws matching the color of the valve - 12 pcs For metal tiles with a VENICE profile COLORS: - graphite RAL 7024 - 3 Characteristics Main attributes Producer KRONO-PLAST Producer country Poland Diameter 150 mm component Roof valve (aerator) Color Gray User characteristics Delivery within the city 3 000 KZT
ИП Retail in Detail
Kazakhstan
USD
56.18/pcs
56.18
Valve under-roof space aerator KRONOPLAST WPBW Under-roof space aerator KRONOPLAST WPBW is designed for installation on finished roofs made of metal tiles. A special bitumen-rubber compound provides waterproofing of the connection between the passage element and the roofing material. It is used for ventilation of the under-roof space / attic. It is mounted on roofs made of metal tiles with a wave height of up to 34 mm (profile type KRONA). Ventilation is necessary to remove excess warm and humid air. Ventilation reduces the likelihood of fungus and mold on roofing materials, which will extend their service life. The aerator is made from Austrian raw materials on German equipment. Primary plastic is used, which is resistant to UV radiation due to a special stabilizer in its composition. European quality, manufacturer's warranty. Material: polypropylene (PP) - stabilized to UV rays. Specifications: * Diameter Ø150, Complete set: screws matching the color of the valve - 12 pcs For metal tiles with KRONA profile COLORS: - brown RAL 8017 - 1 Characteristics Main attributes Producer KRONO-PLAST Producer country Poland Diameter 150 mm component Roofing valve (aerator) Color Brown Custom characteristics Delivery within the city 3 000 KZT
Vefa Aluminyum
Turkey
USD
60.0 - 175.0/pcs
* It is possible to produce in desired quantities,
* Measuring is needed when getting a price; is heard.
* Color options available
* The product can be packed in an exportable format to the whole world.(Disassembled.
* If needed; If necessary, mounting support can be given to the desired country. (Optional)
* Average Manufacturing and Delivery Time to Customs is 30 days (may vary depending on product quantity and size)
Vefa Aluminyum
Turkey
USD
60.0 - 175.0/m2
* It is possible to produce in desired quantities,
* Measuring is needed when getting a price; is heard.
* Color options available
* The product can be packed in an exportable format to the whole world.(Disassembled.
* If needed; If necessary, mounting support can be given to the desired country. (Optional)
* Average Manufacturing and Delivery Time to Customs is 30 days (may vary depending on product quantity and size)
Vefa Aluminyum
Turkey
USD
125.0 - 250.0/m2
* Lighting * Rain and Snow Water Drainage System * Rain and Wind Sensor; * It is possible to be produced in desired quantities, * Measuring is needed when getting a price; is heard. * Color options are available * The product can be packaged in a format that can be exported to the whole world. (Disassembled. * If needed, mounting support can be provided to the desired country. (Optional) * Average Manufacturing and Lifetime; Delivery time to the item is 30 days (it may vary depending on the product quantity and size)
Vefa Aluminyum
Turkey
USD
250.0 - 400.0/m2
* Lighting
* Rain and Snow Water Drainage System
* Rain and Wind Sensor
* It is possible to produce in desired quantities,
* Measurements are needed when buying a price.
* Color options available
* The product can be packaged in a format that can be exported to the whole world. (It is disassembled.
* If needed, mounting support can be provided to the desired country. (Optional)
* Average production and delivery time to Customs is 30 days (may vary according to product quantity and dimensions)
ZIBO CAMEL STEEL
China
Specify the price
USD
0
0
Q195 Q215 Q235 Gra. A Gra. B, SGCC-SD, DX51D, DX51D + Z .......
Thickness | Thickness: 0.12-2.0mm / & plusmn; 0.02 mm
Width | Thickness: 0.12-2.0mm / & plusmn; 0.02 mm
Weight | Weight: 3-8 tons / roll
Zinc | Zinc: 40-275 g / m2
Aluminum-zinc | Aluminum-zinc: 40-150 g / m2
Hardness: according to your requirements
Hardness: according to your requirements
Top coat | Top coat: 7-20 microns
Back Coating | Back coating: 7-15 microns
Surface Treatment: With Plastic Film, Wrinkle, Sandy Surface, Matte, Highlighting, Printing, Embossed
Surface Treatment: With Plastic Film, Wrinkle, Sandy Surface, Matte, Highlighting, Printing, Embossed
Delivery time: 7-30 days
Delivery time: 7-30 days against prepayment, container or bulk
AllianceEnergoStroy LLC
Санкт-Петербург, Russia
Specify the price
USD
0
0
The line of our products is roofing materials, facade materials, thermal insulation materials, waterproofing materials, rolled pipes and fittings, finishing materials, scaffolding and towers.
ООО Технотрейд-Империал
Ульяновск, Russia
USD
5.78/pcs
5.78
BAFFiN
Russia
Specify the price
USD
0
0
The additive is intended: 1. To ensure the waterproofing of concrete and reinforced concrete structures. 2.Increases water resistance, frost resistance, concrete strength. 3. Protects the concrete structure from the effects of wastewater and groundwater, sea water, oil products, aggressive environments: acids, alkalis, etc. 4. Increases the corrosion resistance of concrete, prevents corrosion of steel reinforcement. Technical characteristics of "_BAFF 02 Gel": 1. Increasing the water resistance of concrete by at least 3 steps according to GOST 12730.5-84: - for concrete grade B20, increased water resistance from W2 to W8, - for concrete grade B30, increased water resistance from W6 to W14, 2.When increasing the BAFF 02 additive content to 2% of the cement mass in concrete B30, the water resistance index is greater than W14. 3. Increase in frost resistance to 300 cycles in accordance with GOST 26633. 4. The increase in compressive strength according to GOST 10180-90 - not less than 2.5% for concrete B30 - not less than 25% for concrete B20. The mechanism of action of functional chemical additives "BAFF 02": When BAFF 02 and BAFF 02 Gel additives are added to concrete, the chemical salts of the complex salts that make up the additive react with the calcium, aluminum and iron ions present in the concrete (concrete product) to form supersaturated solutions of insoluble complexes. In the process of concrete curing, insoluble complexes in the form of needle-shaped crystals crystallize from supersaturated solutions in the form of pores in the concrete body. Strength indicators of concrete increase. During the operation of concrete, needle crystals prevent the diffusion of water droplets through pores and microcracks (up to 0.4 mm) inside the concrete body, thereby improving the concrete's waterproof and frost resistance characteristics. Needle-shaped crystals allow excess moisture to freely exit the concrete body in the form of water molecules (the vapor permeability of concrete is preserved).
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message