MILWAUKEE M18 FUEL LI-ION CORDLESS POWER TOOL SET — 1/2IN. HAMMER DRILL/DRIVER AND 1/4IN. HEX IMPACT DRIVER, WITH 2 BATTERIES, MODEL# 2997-22

Product description

FEATURES + BENEFITS Impact drill/driver delivers up to 1200 in-lbs of force. torque. Two speeds: 0-550 rpm; 0-2000 rpm for higher drilling speed. Impact drill mode: 32,000 strokes per minute 1/2 in. 1/4" all-metal ratchet chuck. hex impact tool delivers up to 1800 in-lbs of force. screwdriving torque for faster screwdriving 0–3000 rpm. Impact Mode: 0-3700 ipm 4-mode drive control gives you more control over power and speed. Both tools feature a Powerstate brushless motor for constant torque. Both tools are equipped with RedLink Plus intelligent features to prevent tool and battery damage due to overload or overheating. RedLithium batteries provide more work per charge and extend the life of the kit. The kit includes 2x M18 RedLithium XC 5.0Ah batteries, multi-voltage charger, 2x belt clips, 2x bit holders, side handle and carrying case. 66452 Trademark of Milwaukee. Manufacturer's Warranty 5-year limited warranty. Shipping weight 16.5 lbs. Volt 18. Battery type Li-ion tools included (qty) 2 batteries (qty) 2. Charger included Yes. Storage type: Plastic case.

MILWAUKEE M18 FUEL LI-ION CORDLESS POWER TOOL SET — 1/2IN. HAMMER DRILL/DRIVER AND 1/4IN. HEX IMPACT DRIVER, WITH 2 BATTERIES, MODEL# 2997-22 - 94412

Available

185.0 USD/pcs

Minimum order: 1 pcs

Supply ability: 10 pcs/per month

Make a deal safely and with a guarantee

Submit your request Chat with seller

Vistatoolstore

Not verified supplier

Singapore

All supplier products

Shipping information

Calculate and complete your cargo transportation worldwide using Qoovee Logistics.

Guaranteed shipment on time and secure payment Calculate shipping from Qoovee

Construction Tools Tools

Similar products

Drills Ronix 8905K cordless, impact - 98783

RONIXTOOLS

Germany

Specify the price USD

Experience the unmatched quality of the Ronix 8905K cordless hammer drill kit. The high-efficiency brushless 20V motor has enabled this tool to take care of a wide range of applications with three main functions: drilling, Screwing, and hammer drilling. A brushless motor has a 50% longer lifetime and 25% more speed. A drill with a brushless motor is lighter in weight, makes less noise, and might run longer than the same cordless drill fitted with a brushed motor. The Ronix 8905K has a compact, ergonomic design built with the latest technology

Contact with supplier

Air Dent Puller - SM111 - 97998

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. Net Weight:2750g 8. Tool Length:1120mm 9. Packing:4pcs/14kg/16kg/1.32' Application: It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use. When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.

Contact with supplier

90 degree Angle Drill - SM215 - 97997

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill. Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'

Contact with supplier

Belt Sander - SM601 - 97996

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed. Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'

Contact with supplier

Pneumatic Water Sander - SM209 - 97995

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Contact with supplier

Air File and Air Saw - SM205 - 97994

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'

Contact with supplier

Pneumatic Flux Chipper - SM04A - 97993

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'

Contact with supplier

Pneumatic Needle Scaler - SM04 - 97992

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'

Contact with supplier

Air Polisher 3 Inch - SM03A - 97991

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:790g 6. Tool Length:160mm 7. Packing:20pcs/20kg/21kg/1.2'

Contact with supplier

High Speed Air Grinder - SM03 - 97990

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

Contact with supplier

Air Finger Sander - SM01N - 97989

Claire Wang

Taichung City, Taiwan

USD 100.0 - 1000.0/pcs

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm

Contact with supplier

Air Powered Pneumatic Tools Dr. 3/4" Air Impact Wrench Straight type 100% Made in Taiwan - 97602

SOARTEC INDUSTRIAL CORP. AIR PNEUMATIC TOOLS

Taiwan

USD 225.0/pcs

*Product Features:*The blade is equipped with a spring-loaded mechanism to prevent blocking or power-related problems.*Incorporates a two-stage choke system designed to improve ease of operation.*Product Specifications:*Model: WS-2106*Impact Mechanism: Double Hammer*Stand . Bolt Diameter: 30 (mm)*Max. 5s Torque: 1630 (ft-lb)*Length: 434 (mm)*Trigger: 2-Stage Choke*Governor: 4-Position Actuator*Anvil Length: 6" *Anvil Drive: 3/4" Price: US$225.00 based on MOQ: 20 pcs. PLEASE MUST leave your company contact information in your inquiries. Thanks for understanding.

Contact with supplier