إمدادات مكافحة الحرائق بالجملة على Qoovee
ООО "ГЕФЕСТ ИНЖИНИРИНГ"
روسيا
USD
7.08/шт
حداثة في السوق الروسية - أجهزة إطفاء حريق من الألومنيوم "BARRIER" تبريد مكثف لمصدر الإشعال ومنطقة الاحتراق قدرة عالية على إحداث دخان في منطقة إطفاء الحريق. لا يخلق بيئة غير مناسبة للتنفس ، وذلك بفضل تركيب إطفاء حريق صديق للبيئة. إنها تتواءم تمامًا مع فئات الإطفاء التالية: A ، B ، C ، E (حتى 1000 فولت) الضغط الناتج أثناء تشغيل مطفأة الحريق هو 0.8 ميجا باسكال.الغازات المزاحة هي النيتروجين وثاني أكسيد الكربون ، وهما جزء من الخليط.يمكن أن تعمل مطفأة الحريق في نطاق درجة حرارة من -20 درجة مئوية إلى +50 درجة مئوية.عمر الخدمة 60 شهرًا. التعبئة الفردية.إمكانية استكماله بقوس أو شريط فيلكرو (اختياري) بالجملة فقط! الحد الأدنى للطلب من 24 قطعة (صندوقان) التسليم إلى المناطق من سانت بطرسبرغ
ООО "ГЕФЕСТ ИНЖИНИРИНГ"
روسيا
USD
3.54/шт
خط اطفاء الهباء الجوي للاغراض المنزلية. مصممة للاستخدام السكني. في الشقة ، في الريف ، على الطرق البرية والنقل المائي. ** فئة الإطفاء: أ ، ب ، ج ، هـ (حتى 1000 فولت) تبريد مكثف لمصدر الإشعال قدرة عالية على ضبط الدخان في منطقة إطفاء الحريق لا تخلق بيئة غير مناسبة للتنفس ، وذلك بفضل إطفاء حريق صديق للبيئة يمكن أن تعمل مطفأة الحريق في نطاق درجة حرارة من -20 درجة مئوية إلى +50 درجة مئوية. إجراء بسيط ومفهوم لتشغيل الجهاز ، والذي يمكن للطفل التعامل معه عمر الخدمة 5 سنوات. للبيع بالجملة فقط الحد الأدنى من 48 قطعة (2 صندوق) التوصيل إلى المناطق من سانت بطرسبرغ
ООО "ГЕФЕСТ ИНЖИНИРИНГ"
روسيا
USD
2.72/шт
خط اطفاء الهباء الجوي للاغراض المنزلية. مصممة للاستخدام السكني. في الشقة ، في الريف ، على الطرق البرية والنقل المائي. فئة الإطفاء: أ ، ب ، ج ، هـ (حتى 1000 فولت) تبريد مكثف لمصدر الإشعال قدرة عالية على ضبط الدخان في منطقة إطفاء الحريق لا تخلق بيئة غير مناسبة للتنفس ، وذلك بفضل تركيبة إطفاء حريق صديقة للبيئة. يمكن أن تعمل مطفأة الحريق في نطاق درجة حرارة من -20 درجة مئوية إلى +50 درجة مئوية. إجراء بسيط ومفهوم لتشغيل الجهاز ، ويمكن للطفل التعامل معه. عمر الخدمة 5 سنوات. حجم 1000 مل المنتجات معتمدة. بالجملة فقط! الحد الأدنى للدفعة من 48 قطعة (2 صندوق) التسليم إلى المناطق من سانت بطرسبرغ
LLC "NEDIT"
روسيا
USD
32.7/шт
Mobile fire extinguishing systems. The RAF-100P manual fire extinguisher extinguishes fires of classes A (subclass A2), B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under a voltage of 40 kV). The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment. Maintenance-free. Launch: grating Protected volume: 4 m3 Guaranteed service life: 10 years Dimensions (length, diameter): 210 x 35 mm Maximum weight: 0.185 kg Temperature range: from -50°C to +60°
LLC "NEDIT"
روسيا
USD
78.47/шт
Autonomous fire extinguishing installations. Autonomous system FR-150 (FR-150) Scope: Production and warehouses; Engine compartments of civil special equipment; Server and data centers; Electrical and cable compartments; Painting booths, and other premises of public and industrial buildings. Start: thermal, autonomously Protected volume: 6 m3 Guaranteed service life: 10 years Dimensions (length, diameter): 277 x 32 mm Maximum weight: 0.295 kg Temperature range: from -60 °C to +60 °C Fire extinguishing aerosol generator FR-150 is used when building automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV) in conditionally sealed rooms. Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol. The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment. Does not require maintenance Delivery set: fire-extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
65.39/шт
Autonomous fire extinguishing installations. Autonomous system FR-100 (FR-100) Scope: Production and warehouses; Engine compartments of civil special equipment; Server and data centers; Electrical and cable compartments; Painting booths, and other premises of public and industrial buildings. Start: thermal, autonomously Protected volume: 4 m3 Guaranteed service life: 10 years Dimensions (length, diameter): 210 x 32 mm Maximum weight: 0.21 kg Temperature range: from -60 °C to +60 °C Fire extinguishing aerosol generator FR- 100 is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV) in conditionally sealed rooms. Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol. The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment. Does not require maintenance Scope of delivery: fire extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
56.67/шт
Autonomous fire extinguishing installations. Autonomous system FR-50 (FR-50)
Scope of application:
Production and warehouses;
Engine compartments of civil special equipment;
Server and data centers;
Switchboard and cable compartments;
Paint booths, and other premises of public and industrial buildings.
Launch: thermal, autonomous
Protected volume: 2 m3
Guaranteed service life: 10 years
Dimensions (length, diameter): 153 x 32 mm
Maximum weight: 0.134 kg
Temperature range: from -60 °C to +60 °C
The FR-50 fire extinguishing aerosol generator is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV.) in conditionally sealed rooms.
Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol.
The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment.
Maintenance free
Scope of delivery: fire-extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
47.96/шт
Autonomous fire extinguishing installations. Autonomous system FR-25 (FR-25)
Scope of application:
Production and warehouses;
Engine compartments of civil special equipment;
Server and data centers;
Switchboard and cable compartments;
Paint booths, and other premises of public and industrial buildings.
Launch: thermal, autonomous
Protected volume: 1 m3
Guaranteed service life: 10 years
Dimensions (length, diameter): 120 x 32 mm
Maximum weight: 0.095 kg
Temperature range: from -60 °C to +60 °C
The FR-25 fire extinguishing aerosol generator is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV.) in conditionally sealed rooms.
Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol.
The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment.
Maintenance free
Scope of delivery: fire-extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
42.51/шт
Autonomous fire extinguishing installations. Autonomous system FR-10 (FR-10) Scope: Production and warehouses; Engine compartments of civil special equipment; Server and data centers; Electrical and cable compartments; Painting booths, and other premises of public and industrial buildings. Start: thermal, autonomously Protected volume: 0.4 m3 Guaranteed service life: 10 years Dimensions (length, diameter): 101 x 32 mm Maximum weight: 0.064 kg Temperature range: from -60 °C to +60 °C Fire extinguishing aerosol generator FR- 5 is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV) in conditionally sealed rooms. Delivery set: fire-extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
40.33/шт
Autonomous fire extinguishing installations. Autonomous system FR-5 (FR-5) Scope: Production and warehouses; Engine compartments of civil special equipment; Server and data centers; Electrical and cable compartments; Painting booths, and other premises of public and industrial buildings. Start: thermal, autonomously Protected volume: 0.2 m3 Guaranteed service life: 10 years Dimensions (length, diameter): 87 x 20 mm Maximum weight: 0.025 kg Temperature range: from -60 °C to +60 °C Fire extinguishing aerosol generator FR- 5 is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 40 kV) in conditionally sealed rooms. Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol. The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment. Does not require maintenance Scope of delivery: fire extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
LLC "NEDIT"
روسيا
USD
38.15/шт
Autonomous fire extinguishing installations. Autonomous system FR-2.5 (FR-2.5)
Application area:
Production and warehouses;
Engine compartments of civil special equipment;
Server and data centers;
Electrical and cable compartments;
Painting booths, and other premises of public and industrial buildings.
Start: thermal, autonomous
Protected volume: 0.1 m3
Guaranteed service life: 10 years
Dimensions (length, diameter): 76 x 20 mm
Maximum weight: 0.02 kg
Temperature range: from -60 °C to +60 °C
The FR-2.5 fire extinguishing aerosol generator is used in the construction of automatic fire protection systems as an element that generates a fire extinguishing agent. Extinguishes fire classes A2, B, C, E (solid combustible materials, liquids, gaseous substances and electrical equipment under voltage up to 10 kV) in conditionally sealed rooms.
Autonomous systems are launched autonomously using a thermal cord that reacts to a flame and starts a generator with a fire extinguishing aerosol.
The extinguishing agent is 100% dielectric, does not harm the electrical parts of the equipment.
Maintenance free
Delivery set: fire-extinguishing aerosol generator, thermal cord with a sensitive element 50 cm long, fastening elements, product passport, warranty card, certificate.
ООО "ГЕФЕСТ ИНЖИНИРИНГ"
روسيا
USD
2.72 - 2.94/шт
Trading and manufacturing company "Gefest Engineering" brings to your attention aerosol products - fire extinguishing aerosol "NIMBUS" (OV-1). This is a unique fire extinguisher designed specifically for home use. Simplicity, ease of use and efficiency are the main benefits. Indicators: Intensive cooling of the ignition source and combustion zone High smoke reduction capacity in the fire extinguishing area Does not create an environment unsuitable for breathing, thanks to its environmentally friendly fire extinguishing composition. Extinguishing fires of classes A, B, C, electrical equipment under voltage up to 1000 V. The pressure that is created during the operation of the fire extinguisher is 0.4 MPa. The displacing gases are nitrogen and carbon dioxide, which are part of the mixture. The fire extinguisher can operate in the temperature range from -20 ° C to + 50 ° C. Service life 5 years. The substance used for extinguishing the fire is the composition of ОВ-1 Weight only 695 grams
PAVLIŠ A HARTMANN S.R.O.
تشيكيا
USD
1.1 - 208.11/шт
Пожарные рукава: изолированные пожарные рукава, разработанные специально для профессиональных и добровольных пожарных команд, систем гидрантов, сельского хозяйства и т. Д.
PAVLIŠ A HARTMANN S.R.O.
تشيكيا
USD
1265.19 - 1486.52/шт
The floating pump is designed to deliver high amounts of water, drain lagoons resulting from flooding, replenish fire engine tanks with water from outdoor natural water sources. It can also be used in other applications, such as agriculture, building sites, etc.
Main specifications:
Max. flow
2 400 l/min
Total head
22 m
Discharge connection
Storz A110 (4”)
Engine
Honda GXV 390
Engine power
7.6 kW / 10.2 HP / 13HP (SAEJ1995)
Fuel tank capacity
2.1 l
Fuel
unleaded petrol (BA 95)
Float dimensions (L x W x H)
980 x 710 x 200 mm
Device dimensions (L x W x H)
1080 x 730 x 500 mm
Dry weight (empty)
53 kg
Cat. number
vv 287
The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes through the pump block without a sealing. The pump block is bolted to the engine through the supporting plate and the pump cannot be connected to any other engine type. The bottom side of the block is fitted with a cover to prevent debris and particles over 20 mm in diameter. The delivery outlet is fitted with an A 110 (4") Storz coupling.
The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of hard polyurethane foamin order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstandingstability on the water surface. The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position.The design of the pump allows dry-running without damage.
The data was measured by the accredited testing laboratory TÚPO No. 1011-2
PAVLIŠ A HARTMANN S.R.O.
تشيكيا
USD
714.63 - 951.37/шт
The floating pump can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.
The new float body is made of polyethylene by centrifugal injection as one block. The floater with its new design is equipped with a removable tank. The tank is connected with a fuel hose to the original fuel system. This modification extends the pumps run time for several hours without refilling. The integrated handles make it easy to handle and carry the pump and can also be used to fix a rope to prevent the pump from floating away.
The design of the pump allows dry-running without damage.
Main specifications:
Max. flow
1 145 l/min
Total head
37 m
Discharge connection
Storz B75 (2,5")
Engine
Briggs & Stratton 850 Series
Engine power
4,1 kW / 5,5 HP
Fuel tank capacity
1 l
Fuel capacity additional tank
3,8 l
Fuel
unleaded petrol (BA 95)
Float dimensions (L x W x H)
710 x 610 x 375 mm
Device dimensions (L x W x H)
710 x 610 x 400 mm
Dry weight
24,5 kg
The data was measured by the accredited testing laboratory TÚPO No. 1011-2
PAVLIŠ A HARTMANN S.R.O.
تشيكيا
USD
2850.0 - 3632.0/шт
Пожарный насос с приводом от двигателя PH-ALFA 2 BS 23HP отличается очень малой массой (всего 92,5 кг, включая аккумулятор и полные баки) и компактной конструкцией. Благодаря своему весу и размеру его могут очень легко перенести всего два пожарных в зону пожара даже в узких и неровных местах. Насос пожаротушения снабжен как электрическим, так и ручным стартером.
Преимущества насоса PH - ALFA 2 BS 23HP с бензиновым двигателем:
профессиональный двухцилиндровый четырехтактный бензиновый двигатель с воздушным охлаждением и автоматическим механическим регулированием частоты вращения (гарантия 3 года для профессионального использования)
мощная насосная камера
стационарно-навесная мотопомпа в одной строительной единице
антивибрационное крепление агрегата
прочная, эргономичная трубчатая рама
электрический и ручной (возвратный) стартер
обычное топливо
допускает длительную полную нагрузку
контроль скорости
газовый вакуумный насос
манометр на выходе из камеры
шаровой кран на нагнетательном патрубке
керамическое механическое уплотнение
оборудован освещением
бронзовое рабочее колесо
служба поддержки
حدد السعر
المواصفات الفنية والتصميم • الأداء العالي مع التصميم الحديث والاقتصادي ، • مجموعة منتجات واسعة مناسبة لكل حاجة ، • يمكن تصنيعها من مضخات متعددة المراحل ، رأسية أو أفقية ، مضخات شفط عادية ، مضخات سطحية مزدوجة شفط مزدوجة ، • يمكن إنتاجه كمجموعات ضخ وقطع غيار نوبل حسب الحاجة ، • يمكن تصنيعها بمحركات كهربائية أو محركات ديزل أو كليهما في عبوات ، رمح المواد X20Cr13 أو يمكن تصنيعها من الفولاذ المقاوم للصدأ أو الحديد الزهر أو البرونز ، • تغيرات مواد الجسم حسب درجة الضغط ، • تم اختياره غير متوازن في خط الشفط وفقًا لتدفق المضخة ، هناك انخفاض متحد المركز في خط التفريغ ، • يمكن أن تكون صمامات خط الشفط والتفريغ صمامات فراشة أو صمامات ارتفاع مغزل ، إذا كان صمام الفحص صمام فحص ديسكو ، • يتم توصيل الشفط والتفريغ أيضًا إلى المجمعات والمضخات الشائعة ، مما يوفر سهولة التركيب ، • يتم إحكام غلق العمود مع أختام العبوة اللينة وفقًا لشروط NFPA. • شفط واحد ، دافع مغلق ، متوازن مع ثقوب توازن الحمل المحوري وحلقات التآكل ، متوازن ديناميكيًا • يتوفر صمام تثبيت الضغط بشكل قياسي ، • يمكن تصميم أنظمة التحكم في نفس اللوحة أو كلوحة منفصلة ، متوافق مع أنظمة التشغيل الآلي للمباني ، • برنامج اختبار أسبوعي ، إنذار مسموع وخفيف متاح ، • Hydrophores جاهزة للتجميع في حزمة كاملة مع خزان التوسع ومجموعة الاتصال ولوحة التحكم ، • شبكة خدمة واسعة والكثير من قطع الغيار. • يمكن تصميم منتجاتنا وفقا لمعايير NFPA 20. أماكن الاستخدام • الصناعات • اعمال البناء • المدارس • الفنادق • منشأت صناعية • الرشاشات • أنظمة المياه معلومات تقنية • تدفق حتى 2800 متر مكعب / ساعة • الضغط : 420 م • سرعة حتى 2900 دورة في الدقيقة • درجة حرارة السوائل : -10 درجة مئوية إلى +140 درجة مئوية
"Завод "Воздушный Замок"
روسيا
USD
1000.0 - 3000.0/шт
Пневмотическое прыжково-спасательное устройство ППСУ 20 - куб жизни
Pneumatic Jumping Rescue Device PPSU 20 - Life Cube
Проектные двери
روسيا
USD
306.73 - 712.24/шт
Противопожарные двери для медицинских учреждений DORREN F TYPE
Комбинированная противопожарная FR 30/60 деревянная дверь в металлической противопожарной коробке, облицованная пластиком HPL толщиной 0,8 мм в антивандальном исполнении
Сертифицированы на FR 30, 60 minutes;
Противопожарная, влагостойкая, санитарная конструкция изделия
Не требуют обслуживания – экономичное решение;
Технологически исключены деформация, набухание, гниение, ржавчина, отшелушивание;
Соответствуют Российским и Мировым противопожарным стандартам.
Снимок экрана 2018-11-15 в 21.17.59.png
Техническое описания дверей:
Вес дверного полотна: ~60 кг
Толщина полотна: 55 мм
Нестандартные размеры под проемы заказчика
Наполнение полотна: противопожарная экструзионная плита
Торец полотна: из твердых пород горной древесины
Дверная коробка выполнена из стали толщиной 1,5 мм, окрашивается порошковым способом по каталогу RAL, с терморазрывом
Термовспучивающийся дымогазозащитный уплотнитель ROLF KUHN GMBH
Специализированная противопожарная фурнитура
Возможные опции
Остекление противопожарным стеклопакетом
Отбойники из нержавеющей стали
Вентиляционные решетки
Врезка под СКУД, ЭМЗ и врезные системы Антипаника
Врезка под автоматический порог
Торцы из нержавеющей стали
Применение
Медицинские учреждения
Фармацевтика
Пищевая отрасль
Торговые центры
Исследовательские лаборатории
Индустриальные помещения
ООО "Октябрь"
Ворсма, روسيا
USD
6.51 - 7.16/шт
Древко круглое ошкуренное окрашенное 3-х метровое, диаметром 41-42мм. Рекомендуем заказать и купить изготовленные по эскизу заказчика черенки древка багровища больших диаметров: 41мм, 42мм, 44мм, 45мм, 46мм, 48мм, 50мм, 51мм, 52мм, 54мм, 55мм, 56мм, 58мм, 60мм, 61мм для насадки опорного инструмента багров и рогачей. Древко черенок багровище круглое отесанное, ошкуренное окрашенное, различной длины: 2м, 3м, 4м, 5м, 6м, предназначено для насаживания на него ручного опорно-поддерживающего инструмента, а именно багров и рогачей, которые в собранном виде применяются при выполнении различного рода работ на «воздушных» электротелекоммуникационных линиях и на погрузочно-разгрузочных работах. Важно отметить, что наряду со стандартными размерами крупногабаритных черенков ООО "Октябрь" планирует производить изготовление багровище по эскизам заказчиков. Для удобства заказчиков предлагается тарировочная таблица стандартных труб выпускаемых на предприятиях Российской Федерации. Таблицу в приложении эксель можно получить по емейл или запросить по телефону 8-905-66-20-362 В текстовом редакторе таблица имеет следующий вид: Рекомендация для выбора древка черенка по диаметрам (мм): 41, 42, 44, 45, 46, 48, 50, 51, 52, 54, 55, 56, 58, 60, 61, 62 Толщина Стенки пмо Борский Трубный Завод 1, 5 2, 0 2, 5 3, 0 1, 5 2, 0 1, 5 2, 0 2, 5 не Бор: 2, 8 3, 2 4, 0 1, 5 2, 0 3, 0 1, 5 2, 0 2, 5 3, 0 1, 5 2, 0 2, 5 3, 0 не Бор: 3, 0 3, 5 4, 0 не Бор: 3, 0 3, 5 4, 5 2, 0 2, 5 3, 0 1, 5 2, 0 1, 5 3 2, 0 3, 0 4, 0 Наружный Диаметр Трубы 38 40 42 43 45 48 51 53 54 57 60 63, 5 65 76 Внутренний Диаметр Трубы 32, 33, 34, 35 36, 37 37, 38, 39 35, 37, 40 39, 41, 42 42, 43, 44, 45 45, 46, 47, 48 45, 46, 47 45, 47, 48 51, 52, 53 54, 57 60, 5 59 68, 70, 72 Минимальный Диаметр Черенка 33 37 38 36 40 43 46 46 46 52 55 61 60 69 Максимальный Диаметр Черенка 40 42 44 45 47 50 53 55 56 59 62 66 67 78 Рекомендуемый Диаметр Черенка 36, 38 38, 40 40, 42 40, 42 42, 45 42, 45, 48 48, 50, 51 48, 50, 51 50, 51, 54 54, 56 56, 61 61 61, 65 70, 75, 80.
Черенок древко багровище предназначено для насаживания на него ручного опорно-поддерживающего инструмента, а именно багров и рогачей, которые в собранном виде применяются при выполнении различного рода работ на «воздушных» электротелекоммуникационных линиях и на погрузочно-разгрузочных операциях. Фиксации насаживаемого на древко инструмента осуществляется стягивающей резьбовой шпилькой или болтом и двумя фиксирующими шурупами или гвоздями. Черенок древко багровище изготавливается из сортовой древесины, подразделяется по толщине, длине, степени обработки и наличию защитного покрытия.
Применение указанных инструментов регламентировано Правилами выполнения работ по обслуживанию ЛЭП и ЛЭС, и Инструкциями по выполнению такелажных работ.
ООО "ИНВЕСТ ТОРГ"
روسيا
USD
35.97/шт
Время защитного действия.
при эвакуации - не менее 20 мин
при ожидании - не менее 40 мин
2
Масса рабочей части и габаритные размеры
Масса рабочей части самоспасателя СПИ-20 составляет 1.5 кг
Габаритные размеры в коробке составляют 115х195х220 мм
3
Температурный диапазон эксплуатации
Гарантийный срок эксплуатации в состоянии готовности.
Температурный диапазон эксплуатации, от 0 до +60 oC
Гарантийный срок эксплуатации в состоянии готовности, 5 лет
ООО "ИНВЕСТ ТОРГ"
روسيا
USD
27.25 - 29.43/шт
Рукав пожарный напорный РПМ(В)-50-1,6-У1 "Стандарт" в сборе с ГР-50 применяется для комплектации пожарной техники, пожарных машин и мотопомп.
Технические характеристики рукава пожарного напорного "Стандарт" Ду 80мм 1,6 МПа в сборе с ГР-80 Ал:
Условный проход (внутренний диаметр) DN 80 (80+2 мм)
Масса рукава в скатке (20м) не более 9 кг
Рабочее давление 1,6 МПа
Испытательное давление 2,0 МПа
Разрывное давление 3,5 МПа
Рабочая температура эксплуатации от -60 до +40 °С
Стойкость к абразивному износу не менее 50 циклов
Стойкость к воздействию стержня с температурой поверхности 300 °С не менее 30 сек.
ООО "ИНВЕСТ ТОРГ"
روسيا
USD
21.25 - 22.34/шт
Рукав пожарный напорный РПМ(В)-50-1,6-У1 "Стандарт" в сборе с ГР-50 применяется для комплектации пожарной техники, пожарных машин и мотопомп.
Технические характеристики рукава пожарного напорного "Стандарт" Ду 65мм 1,6 МПа в сборе с ГР-65 Ал:
Условный проход (внутренний диаметр) DN 65 (66+2 мм)
Масса рукава в скатке (20м) не более 11 кг
Рабочее давление 1,6 МПа
Испытательное давление 2,0 МПа
Разрывное давление 3,5 МПа
Рабочая температура эксплуатации от -60 до +40 °С
Стойкость к абразивному износу не менее 50 циклов
Стойкость к воздействию стержня с температурой поверхности 300 °С
ООО "ИНВЕСТ ТОРГ"
روسيا
USD
14.71 - 15.8/шт
Рукав пожарный напорный РПМ(В)-50-1,6-У1 "Стандарт" в сборе с ГР-50 применяется для комплектации пожарной техники, пожарных машин и мотопомп.
Технические характеристики рукава пожарного напорного "Стандарт" Ду 50мм 1,6 МПа в сборе с ГР-50 Ал:
Условный проход (внутренний диаметр) DN 50 (51+2 мм)
Масса рукава в скатке (20м) не более 9 кг
Рабочее давление 1,6 МПа
Испытательное давление 2,0 МПа
Разрывное давление 3,5 МПа
Рабочая температура эксплуатации от -60 до +40 °С
Стойкость к абразивному износу не менее 50 циклов
Стойкость к воздействию стержня с температурой поверхности 300 °С не менее 30 сек.
4276 3801 1757 4314 Александр Витальевич Ш.
Москва, روسيا
USD
22.67/шт
Артикул:
TPL-KV-NF60100
Характеристики:
Размер: 60х100 см
Толщина: 1мм
Температурный предел верхнего слоя +1200°С
Температурный предел лавсановой подложки +200°С
Вес: 250 гр.
Применение:
Защита поверхности от возникновения пожара при попадании искр, падения продуктов горения, разлива пожароопасных жидкостей и риск их воспламенения и других пожароопасных ситуаций. Основное бытовое применение это укладка возле камина или печи, так же можно использовать в качестве защитного экрана при проведении сварочных и иных работ.
Комплект: Коврик, упаковка тубус
1
يساعدك موقع Qoovee الرسمي على إبرام صفقات مربحة ، والعثور على مورد ومصنع لتنمية عملك. في قسم "قاعدة الموردين" يمكنك أن تجد كل ما تحتاجه لنفسك: إمدادات مكافحة الحرائق من روسيا وقيرغيزستان وكازاخستان وتركيا وأوكرانيا ودول أخرى يتم تحديث فئات المنتجات باستمرار وتبقى ذات صلة. يهتم موردو الجملة بمشتريات الجملة والشراكات وهم على استعداد للتعاون المفيد