LLC "TECHPLASTIC"

Homogeneous polypropylene sheet Sheets are made from polypropylene block copolymer, which guarantees high physical and mechanical properties while maintaining impact strength. Dimensions: Manufactured in thickness from 3 to 19 mm, width up to 2000 mm, length up to 4500 mm Colors: natural, gray (RAL 7032), blue, light blue, green (RAL 6005), light green (RAL 6002), white ( other colors as agreed) Additives: If the customer wishes, it is possible to introduce additives that ensure the resistance of the sheet to UV radiation, apply a protective PE film on the front surface of the sheet to protect against mechanical damage.

Structurally lightweight polypropylene sheet Its production method is practically the same as the production of homogeneous sheets. The main difference is special additives that cause the middle part of the sheet to foam. As a result of this process, the middle of the sheet is a porous structure. This structure gives the expanded polypropylene sheet additional properties. Due to the porous component, such a sheet has less weight and density, without loss of strength. Dimensions: Manufactured in thickness from 8 to 19 mm, width up to 2000 mm, length up to 4500 mm Colors: natural, gray (RAL 7032), blue, light blue, green (RAL 6005), light green (RAL 6002), white ( other colors as agreed) Additives: If the customer wishes, it is possible to introduce additives that ensure the resistance of the sheet to UV radiation, apply a protective PE film on the front surface of the sheet to protect against mechanical damage

Wall parts serve as the main structural parts for the production of large-scale tanks and claddings. Wall parts are equipped with a slope for welding. Dimensions: 1000 x 1000 x 80 mm (MOD 20, VARIO - in the middle with the possibility of cutting into 2 identical parts, QUATRO - with the possibility of cutting into 4 identical parts). Colors: White (other colors by agreement). Additives:At the request of the customer, it is possible to introduce additives that ensure the resistance of the sheet to UV radiation.

Welded rod and polypropylene copolymer block. Perfectly welds products of our production. Dimensions and sections: Circle - diameter 4mm, triangle - sides 5x5x7mm. Colors: natural, gray (RAL 7032), blue, light blue, green (RAL 6005), light green (RAL 6002), white (other colors on request). Additives: At the request of the customer, it is possible to introduce additives that provide resistance to UV radiation.