Fourkim Tekstil Boya ve Kimya Ürünleri A.Ş

FORPRINT BINDER 80 N Characteristics: Fixing agent for pigment printing The product develops resistance to washing, resistance to wet and dry friction of fabric dyeing by means of a special reaction of transverse the bond that occurs due to the acrylic structure of the product during the fixation process during printing. This colorless liquid does not contain ethyl alcohol. Chemical characterization Appearance Ionic character PH level Share Bulk Viscosity (cps): Stability Storage Polymer emulsion Acrylate / Styrene White, liquid anionic 6.0 - 8.0 ~ 1.0 & lt; 500 mPas FORPRINT BINDER 80 N is compatible with auxiliary substances used in pigment printing. Product has very good electrolyte strength. The product is sensitive to frost. Changes occur when temperatures near the freezing point. The product is sensitive to temperatures above 40 ° C. The product can be stored in its original packaging in dry cool place (5-35 ° C) within 6 months. At the end of this period, if the properties of the product checked and there are no changes in values, you can continue using the product. Properties Film properties FORPRINT BINDER 80 N creates a dry, soft and shiny film after fixation. Paint makes the pigment look matte, transparent and vibrant. How to apply Textile material FORPRINT BINDER 80 N can be applied to all types of fabrics commonly used in textile print. It is recommended to add fixed formaldehyde to increase resistance (e.g. 5.0-10.0 g / kg FORPRINT PFF 40). Commit conditions Optimal fixing conditions for best stability results are 4 - 5 minutes at 150 ° C. The crosslinking speed increases at higher temperatures. Protective film It is recommended to cover it with foil if it needs to be kept intact for some time. Value The pH of the slurry should be adjusted to 7.5-8.0 with ammonia. Also recommended filter out ready-to-print paste (?). We reserve the right to modify the product and technical leaflet. Our department for applied technique is always at your service for further information and advice. Our technical advice and recommendations given verbally, in writing or by trials are believed to be correct. They are neither binding with regard to possible rights of third parties nor do they exempt you from your task of examining the suitability of our products for the intended use. We cannot accept any responsibility for application and processing methods which are beyond our control. Fourkim Tekstil Boya ve Kimya Ürünleri San.Tic. A.Ş. Barbaros Hayrettin Paşa Mah. 1992 sok. No: 16 Vetro City D: 42 Esenyurt / İstanbul