Синергия-Мечта

分享:
Not approved icon 未经验证的供应商
做一个安全的处理这个供应商。 提交预订单
USD 120000.0/个/件/只 120000.0
The furnace for the production of charcoal from raw materials with a moisture content of more than 25% is equipped with a complex for preliminary drying of wood, has a capacity of 60-70 tons of coal per month. The main feature of the furnace is the presence of an automated furnace control system, which allows you to control the temperature conditions and the quality of the products. The drying complex allows to reduce the moisture content of coal by 30-40%, without reducing productivity. BASIC TECHNICAL CHARACTERISTICS "ModEco 4-60" < strong> no. Parameters Unit measurements Value 1 The area occupied by the ModEco 4-60 oven m 2 127.3 2 Overall dimensions of the main block of the ModEсo 4-60 furnace, not less than: - length / length with a conveyor - width -height m 6.75 / 16.75 7.6 8-10 3 Package weight , no more t 42 4 Mass of each transport block, no more t 9.3 < / td> 5 Supply voltage, current frequency IN; Hz 220; 50 6 Power consumption of the "ModEсo 4-60" installation < / td> kWh 0.5 7 Consumption of raw materials (firewood), L = 300 ... 350 mm m 3 / day 13-16 8 < td> Firewood consumption to support processes * m 3 / day 0,2-1,0 9 Productivity for charcoal with wood moisture up to 25% ** kg / day 1800-2000 10 Service personnel *** people / cm 2-3 11 Time to prepare for launch hour 2 12 Preparation time for carriage by road < / p> hour 48 13 Cycle --- Continuous 14 Cycle time per retort ** hour 16-20 15 Coal cooling time in extinguishers hour 24-48 16 Operating temperature range Furnace o С 560-650 pyrolysis chambers < / p> o < / sup> С 510-580 17 Maximum allowable temperature < p> Furnace o C 700 < / tr> pyrolysis chambers o C 600 * - the value of the parameter depends on the season, moisture content of raw materials. ** - the value of the parameter depends on moisture content, breed and fraction of raw materials. *** - the value of the parameter depends on the number of installations at one site: 1 installation - 2 people per shift 2 installations - 2 people per shift 3 installations - 3 people per shift < / i>
关于公司
各种类: 地址:
装备 仪器, 包装设备, 木头加工设备 Украина, ул. Евгения Коновальца 31, 1 этаж

“ Synergy-Dream”公司成立于2014年,已选择其活动方向作为木炭燃烧设备的工业生产。乌克兰工程师为我们提供了独特的开发成果,他们在经过3年艰苦的炉子实验模型测试后,烧成数百个木材,能够获得设备-真正的燃煤者的梦想。我们所有的设备都具有高生产率和长使用寿命,消除了对人类和环境的不利影响,并且重要的是,确保了始终如一的高质量木炭生产。

目前,我们生产3种炭窑工业模型,这些模型针对各种原材料而设计:

-水分含量最高为25%的木材

-切碎的木材(木材含水量超过25%)

-椰子壳

为了给燃煤机提供组织木炭生产所需的全套设备,我们着手开发木炭包装设备。因此,我们提供了一条高性能的灌装线,可让您将煤包装到各种容量的牛皮纸袋中,将煤分为4部分。

与“ Synergy-Dream”公司合作的优势:

向我们订购设备时,您可以依靠单独的方法。在制造熔炉时,我们会考虑客户的意愿,并使熔炉适应国家的气候特征和原材料的类型。

我们的专家将在您的现场就我们的设备使用和木炭生产组织提供合格的建议。

在您的生产中使用 ModEco 系列烤箱,您 不必担心会对环境和人类造成负面影响。我们的熔炉既环保又符合人体工程学。

借助ACS熔炉的设备,您将有机会减少工厂的人员数量,完全控制熔炉中的过程以及远程控制熔炉。

您将获得可以连续工作数年的高质量设备。我们的子公司Carbon-Trading(carbontrading-ua.com)的经验证实了这一点,该公司经营3台 ModEco 4-60 PS 。 Carbon Trading由于其产品的高品质,及时的交货和指示性的生产场所而向欧洲的木炭消费者赢得了欢迎和信任,该场所对公司的客户开放。

我们不出售灶具设计,而是生产和出售我们自己工作的灶具。


供应商:
"Узлегпром"
写信给我们,我们在线!