This is a modern device that allows you to quickly and efficiently apply powder paint. One of the key advantages of the model is the presence of a display that allows you to set the operating parameters as accurately as possible. A spray gun, a control unit, a transport trolley, a 40 liter tank, an injector, an oil moisture separator and a set of hoses are supplied with the device. the tank is made of high quality stainless steel; the unit is connected to a standard household network with a voltage of 220 V (+/- 10%) and a frequency of 50 Hz; Atlas-19 consumes no more than 30 W; the voltage at the corona electrode fluctuates within 10–100 kV, depending on the set parameters; the feed hopper holds 40 liters of powder; minimum inlet air pressure - 0.4 Mda; air consumption - 13 200 l / h; maximum inlet air pressure - 0.8 Mda; the mass of the fully assembled device does not exceed 40 kilograms; consumption powder - 265 g / min; the compressed air contains no more than 1.4 g / m3 of moisture, no more than 0.1 ppm of oil; the dyeing speed reaches 600 g / min; average inlet air pressure - 0.6 Mda; short-circuit current - 180 μA .