Baumaterialien Großhandel auf Qoovee Market

Axialventilatoren der Baureihe VOK werden in Abluftanlagen von Industrie- und öffentlichen Gebäuden, in Notrauchabzugsanlagen als Gegendruckventilatoren eingesetzt. Die Ventilatoren sind dafür ausgelegt, Luft oder andere nicht explosionsfähige, nicht aggressive Gasgemische mit Temperaturen bis +40 ° C zu bewegen, frei von klebrigen Stoffen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m³ .

Radialventilatoren vom Typ VRK.G werden in Abluftsystemen von Industrie- und öffentlichen Gebäuden verwendet. General-Exchange-Ventilatoren sind für die Förderung von Luft oder anderen nicht explosionsfähigen, nicht aggressiven Gasgemischen mit Temperaturen bis zu plus 70 ˚С, frei von klebrigen Stoffen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg . bestimmt / m³. VRK.G Ventilatoren werden auch in korrosionsbeständiger und explosionsgeschützter Ausführung präsentiert.

Radialventilatoren vom Typ VR.80 -75 werden in Zu- und Abluftsystemen von Industrie- und öffentlichen Gebäuden verwendet. Entwickelt, um Luft oder andere nicht explosionsfähige, nicht aggressive Gasgemische mit Temperaturen bis zu +70 ° C zu bewegen, frei von klebrigen Substanzen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m³. Auch Ventilatoren VR.80-75 werden in explosionsgeschützter und korrosionsbeständiger Ausführung präsentiert.

Radiale Rauchabzugsventilatoren vom Typ VRD.80-75 sind dafür ausgelegt, bei einem Brand entstehende hochtemperaturige Rauch-Luft-Gemische abzuleiten und gleichzeitig die Wärme außerhalb des Wartungsraums abzuführen. Der Ventilator wird in Abluft-(Not-)Belüftungsanlagen von Industrie-, öffentlichen, Wohn-, Verwaltungs- und sonstigen Räumen (außer Explosionskategorien A und B nach NPB 105-03) eingesetzt, um bei einem Brand entstehende Rauch-Luft-Gemische mit eine Temperatur von bis zu +400 ° C oder bis zu + 600 ° C für 120 Minuten. Es ist möglich, Ventilatoren in allgemeinen Lüftungssystemen von Industrie-, öffentlichen, Wohn-, Verwaltungs- und anderen Räumen zum Bewegen von Luft oder anderen nicht explosionsfähigen, nicht aggressiven Gasgemischen mit Temperaturen bis zu + 70 ° C, frei von klebrigen Stoffen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m³, bei reduzierter Rotationsfrequenz nicht mehr als 50%.

Rechteckrohrventilatoren (VKT) werden in Zu- und Abluftsystemen für Industrie- und öffentliche Gebäude eingesetzt. Die Ventilatoren sind dafür ausgelegt, Luft oder andere nicht explosionsfähige, nicht aggressive Gasgemische mit Temperaturen bis +40 ° C zu bewegen, frei von klebrigen Stoffen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m³ . Klimatisierung der Ventilatoren U2 nach GOST 15150-69 (Umgebungstemperatur von -30 ° C bis +40 ° C). Am Aufstellungsort der Ventilatoren sollte der Effektivwert der Schwinggeschwindigkeit aus externen Schwingungsquellen 2 mm / s nicht überschreiten. Die Schutzart des Gehäuses ist IP44.

Faserplatten TSN 20 werden in der Möbel- und Türenindustrie, Bau, Dekoration verwendet. Die Platten eignen sich zum Anordnen von wärme- und schalldämmenden Trennwänden. Zu den Vorteilen von Faserplatten zählen hohe Festigkeit, Langlebigkeit, einfache Verarbeitung, glatte, ebene Oberfläche. Blätter sind einfach zu bearbeiten, auch ohne Erfahrung. Faserplatte TSN-20 - Beidseitig geschliffen, E2. Dicken: 2,5 mm, 2,8 mm, 3 mm, 3,2 mm. Bogenformat: 2140 × 1220, 2440 × 1220, 2620 × 1220, 2745 × 1220, 2750 × 1220, 3050 × 1220, 3060 × 1220, 2440 × 1830, 2440 × 2050, 2440 × 2070, 2440 × 1700, 2745 × 1700 , 2745 × 740. Der LKW passt ungefähr 9000 Quadratmeter. Preis auf Anfrage.

Zu den Vorteilen des Materials zählen hohe Festigkeit, Steifigkeit, Gleichmäßigkeit und einfache Verarbeitung. Spanplatten lassen sich gut mechanisch bearbeiten (Sägen, Hobeln, Bohren, Fräsen), leicht verleimen und lackieren. Es wird im Bauwesen, Maschinenbau, Möbelbau eingesetzt. Wir bieten Ihnen: Spanplatten 2440x1830x16 mm Klasse 1. Emissionsklasse E1 (geringster Gehalt an freiem Formaldehyd). Veredelungsgrad: Beidseitig geschliffen. Die LKW-Laderate beträgt 420 Blatt. Wir sind bereit, Vorschläge für den Export zu prüfen. Preis auf Anfrage.

Flexible Gusseisenscheiben der Marke Rima Große Kapazitätsoption (von 20 kW bis 250 kW) Elektronische Zündsteuerung Hohe Verbrennungsleistung bei geringen Abgasemissionen Verwendung mit Erdgas und Flüssiggas Standard- und elektronische Bedienfeldoptionen 2 Jahre Garantie

Lokaler AlSi10Mg-Gusswärmetauscher der Marke Rima 107% Ertragswert Breite Heizleistungsoption (von 70 kW bis 3250 kW) Ermittlung der Kesselleistung nach der 1:7 Flammenmodulation Wärmelast 6 bar Arbeitsdruck Hoher jahreszeitlicher Wirkungsgrad, niedrige Emissionswerte Siemens Kaskaden-Bedienpanel mit verschiedenen Zonensteuerungen 16 Kesselkaskadenanschluss Kompatibilität mit Open Therm- und BUS-Kommunikationssystemen Gießscheiben für einfache Installation, Verwendung und Wartung niedriger Geräuschpegel

Zwangsbrennerkessel Flexible Gusseisensektionen der Marke Rima Breite Heizleistungsoption (von 30 kW bis 930 kW) Hocheffizientes 3-Zug-Design Hohe Verbrennungsleistung mit geringen Abgasemissionen Verwendung mit Flüssig- und Gasbrennern Standard- und elektronische Steuertafeloptionen

Festbrennstoffkessel Flexible Gusseisensektionen der Marke Rima Große Kapazitätsoption (von 20 kW bis 95 kW) Kann mit Holz und Kohle verwendet werden Schornsteinklappe und einfache Schornsteinzugkontrolle

Acryl Fassadenfarbe

Der Hersteller bietet eine moderne Kläranlage an, die für ein Haus für 6 Personen ausgelegt ist. Die Haushaltskläranlage Poplar 6 weist mehrere Modifikationen auf, nämlich mit Schwerkraft- und Zwangsentwässerung sowie mit verlängertem Stutzen. Die Klärgrube Topol 6 kann 98% des häuslichen Abwassers in einem Haus oder einer Hütte, in dem bis zu 6 Personen leben, reinigen. Die Installation von Poplar 6 dauert 1 Arbeitsschicht, ca. 6-8 Stunden. Schnelle Lieferung von autonomen Kläranlagen Topol 6 in ganz Russland.

Sie werden hauptsächlich für den Filterschutz von Beton- und Ziegelkonstruktionen verwendet, um eine Abdichtungsschicht auf horizontalen (einschließlich Decken) und vertikalen Flächen zu erzeugen. Gebrauchsfertig erfordert kein Aufwärmen. Enthält Zement und Faserfüller.

Gebrauchsfertige Abdichtungsmasse. Mastix ist perfekt für die Abdichtung von Fundamenten, Kellern, Bodenplatten

SALE OF SELF CUTTERS Good afternoon, FART-NSK LLC Novosibirsk we offer to view our assortment. Individual approach to each client !!! In our company LLC `` FART-NSK '' you will always find a huge assortment of fasteners. There are more than 2000 items of goods in constant availability in the warehouse. Highly qualified employees with extensive experience are always ready to solve your questions. We work with both wholesale and retail clients, and are always ready to place an order of any degree of complexity.

Travertine. Marble. Stones for construction. We are looking for partners, buyers, clients.

Article МС 2233. Mosaic made of tempered glass, chip size 48x48 / 23x23 mm., 0.54 m2 in a box. The mosaic is resistant to temperature changes, color-fast, suitable for laying both on walls and on the floor. Recommended for indoor use. .

Our factory produces several types of single-deck plastic pallets of different sizes and capacities.

We work from stock and on order, we have our own production and 2 offices in Southeast Asia, as well as a large warehouse in the Moscow region and an office in Moscow, complete set from 2 days.

The roofing screw consists of a turnkey hex head, a rubberized washer (EPDM), which prevents moisture penetration, and a self-drilling tip. The thread is rare or frequent, depending on the diameter of the self-tapping screw. The main application is fastening corrugated board to a wooden or metal crate.

The drywall-metal (GM) self-tapping screw has a frequent thread, a sharp tip and a countersunk head for a Phillips recess (PH2). It is used for fastening wooden structures and drywall to metal profiles, no more than 0.9 mm thick.

The dowel-nail for thermal insulation is a fastener, consisting of a dowel with a wide round head and a special nail, designed for attaching heat-insulating materials to dense solid substrates such as brick, concrete and stone. It is used for installation on walls especially exposed to adverse weather conditions. The dowel has a two-section wedging zone and a wide plastic clamping washer with a diameter of 60 mm, which provides easy installation and reliable fastening of the thermal insulation material to the supporting base. Dowel length - 100 mm. Diameter - 10 mm. The fixing of the dowel in the wall is done by driving in a metal spreader nail. The metal nail is recommended for dowel lengths of 140 mm or more, as well as for the installation of heavy structures.

A dowel-nail is a fastener, consisting of a dowel and a special nail, designed to attach objects to dense solid materials such as brick and concrete. The plastic dowel has a special hidden base. The dowel-nail is used to attach objects to materials such as concrete, foam concrete, brick, wood, stone, etc. The dowel diameter is 6 mm. Length - 40 mm.

Interior high-pressure paints on any surfaces, incl. for all types of wallpaper; moisture resistant; washable; snow-white. High-strength facade high-strength paints; textured. Elastic silicone-based paints, perfectly retains moisture, has excellent dirt-repellent properties, and hides cracks. Suitable for indoor and outdoor use, coating durability up to 15 years. Acrylic enamels for concrete, wood, metal, for heating radiators, as well as a deep penetration primer, concrete contact, grout for joints, We can tint on request.

New Uber light boxes available from the manufacturer. Complete with universal car mounts. Sending to other cities is possible (to the door or to the terminal of your city). Sale by wholesale and retail. & nbsp; If you have a question - call! Package Contents: High impact plastic box; Reflective taping; Universal, quick-release fasteners

Safety glasses are used to protect the eyes from dust, scale, paint, shavings during work. These glasses have a transparent design. The material is plastic. Technical characteristics of goods: Type of glasses - goggles-mask closed with natural ventilation; Optical class - 1; Lens material - polycarbonate; Lens color - transparent; Body material - soft non-flammable PVC; Fastening - adjustable headband; The type of use is multiple.

Boilers of the Bratsk-M series are designed for heat supply of buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

Boilers "Bratsk-0.8" are designed for heating buildings and structures for various purposes. The boilers operate not only on screened bituminous coals, but also on ordinary bituminous and brown coals with a lump size of up to 60 mm and a content of fine particles (less than 6 mm) up to 50%. The boiler delivery set includes a mechanical furnace with a control cabinet, which consists of a furnace bed, an electromechanical drive bar, a fuel bunker, a fan, a secondary blast collector with a roof. The boiler heating surfaces are two staggered packages of cast-iron sections mounted on a brick pedestal. The two-way movement of gases is carried out along the convective surface of the sections. Gas inlet - through a water-cooled steel chamber. The control cabinet provides automatic operation of the boiler and its protection in case of deviations from the permissible values: pressure, water temperature and discharge in the combustion chamber, as well as signaling in case of an emergency.

High quality building plaster.

Dry building mixes at wholesale prices.

The # 1 company in Kyrgyzstan providing fogging systems. We have the best outdoor cooling technology! Thanks to the uniqueness of the systems and high optimization, we have already implemented more than 110 large-scale projects in Kyrgyzstan. Due to the certified quality of fogging systems Tuman.kg, customers receive a 6-year warranty for the installed equipment (3 years of equipment warranty and 3 years of free service). The main direction of the company is the cooling of summer terraces, cafes, restaurants, gazebos, production facilities, etc. Artificial fogging systems are the surest and most advanced way to combat unwanted odors, dust and sultry heat in open spaces. Fogging technologies allow you to control the air temperature, create an atmosphere of the desired coolness, as well as completely cut off dust and allergens contained in it. The company has been providing services since 2012. Over the years, the systems have proven their functionality, and the company's employees have proven their professionalism. Our clients: Teahouse "Vostochka" Cafe "Koreana Family" Uncle Tom's Cabin Cafe Restaurant "Furusato" Restaurant "Navigator" Chaikhana "Bukhara" Coffee shop "Vannilla sky" Continental Restaurant Time out restaurant Confectionery "Our mark" Cafe "Red Fox" Cafe "Diyar" Restaurant "Arzu style" Cafe "Kaganat" Restaurant "Arzu" (Lebedinovka) Restaurant "Talisman" Restaurant "Ulu Too" Cafe "Rublevka" (Kordai) Teahouse "Omar Khayam" BC "Beren Gold" Restaurant "Villa V Club" Hotel "Jannat" Restaurant "Skullcap" Barbecue "Caucasian yard" Cafe "Aist" Cafe "Veranda" Cafe "Shafran" Wine restaurant "Vinoteka" Oculus Cocktail Bar Teahouse "Teahouse No. 1" Beauty salon "Success" Cafe "Jasmine" Cafe "Arabeska" Cafe "Santa" Gastropub "Street Myasnaya" Cafe "Kleo" Coffee shop "Gloria" Cafe "Fakir" Cafe "Joma" "Barbecue No. 1" Bazaar "Ak Emir" Cafe "Odnoklassniki" Cafe "Ozhak Kebab" Cafe "Di 2" Coffee house "Bagel" "Golf Club" Bar "Pinta Pub" Coffee house "Panda" Restaurant "Bravo" Cafe "Merci Baku" "Barclays Pub" Hotel "Ambassador" Cafe "Aura" Restaurant "Veslo" Cafe "Khoja Nasreddin" Cafe "Saksaul" Restaurant "Prego" "Live Bar" BC "Ordo" Cafe "Ugolyok" Teahouse "Aladdin's Lamp" "Neo Med" Cafe "Ormon Khan" Farms Mycelium Greenhouses Disinfection Disinfection tunnel

We build arched frame hangars for production. & nbsp; In construction, we will take into account the peculiarities of your business, the need for a crane, room temperature, fire safety. Hangar specifications: Length x Width x Height & ndash; 30 m x 15 m x 7.5 m, Foundation & ndash; bored piles, Concrete grillage & ndash; 1 meter high, Arches & ndash; profile tube 60 x 40 mm, Lathing & ndash; timber 50 x 100 mm, Coverage & ndash; professional sheet С 8 (thickness 0,4 & hellip; 0,45 mm) Insulation & ndash; mineral wool 100 mm thick. Gate & ndash; sectional end 4 x 4 m. Floor device & ndash; concrete with a hardened top layer (topping). & nbsp; Why choose SarAgroMontazh for building? - Ready & nbsp; do the job on a turnkey basis from the project to the installation of the floor in the hangar. At the end of construction & nbsp; take over the hangar and bring in equipment. - Construction time & ndash; 30 -45 days. Metal structures are manufactured in the workshop, and assembly and installation takes place at the construction site. Due to this, we reduce the construction time. - Purchase metal, profiled sheet & nbsp; & nbsp; from trusted suppliers, the metal will be of the required thickness & ndash ; & nbsp; you can check it yourself & nbsp; . Certificates and micrometer & nbsp; will provide . Call, we will provide & nbsp; calculations and contacts of customers who built it.

Building straight-walled grain storage hangars & nbsp; capacity & nbsp; 9 & nbsp; 000 tons of grain & nbsp; & laquo; turnkey '. Price: Hangar dimensions (width x length) - & nbsp; 24 x 120 & nbsp; m; Retaining wall inside & ndash; 2.4 m high concrete; Roofing sheet - & nbsp; wave height 44 mm, thickness 0.5 mm; Professional sheet on the walls & ndash; wave height 20 mm, thickness 0.45 mm; Gate & ndash; 4 x 4 m at the ends of buildings or at the side of the hangar; Louvered grilles for grain ventilation. SarAgroMontazh Company trust construction because .., 1) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; We have been building grain storage hangars for 5 years already. We understand how thick the metal should be, what kind of profiled sheet is needed for the hangar to please you & nbsp; years. 2) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; If after the conclusion of the contract your plans change & ndash; we are & nbsp; ready to go to a meeting and make changes to the agreement. 3) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; We buy metal and profiled sheet from trusted suppliers, there will be the declared thickness of the metal & ndash; & nbsp; you can check it yourself. Certificates and micrometer & nbsp; will provide. Call, & nbsp; will provide a calculation and & nbsp; contacts of farmers, peasant farms and agricultural cooperatives, who have already built hangars! & nbsp;

Founded in 2008, Taizhou Beierde Electromechanical Technology Co., Ltd is a professional China Booster Pipe Fans Manufacturers and Booster Pipe Fans factory,which specializing in various AC servo motors and axial flow fan rotors.We have been continuously increasing capital investment and introducing advanced equipment, production technology, and management experience. Now we have a full set of production equipment and testing equipment, All products have passed the National Compulsory Product Certification (3C) and the EU Compulsory Product Certification (CE),we established a comprehensive service system and won widespread praise and trust with high-quality wholesale Booster Pipe Fans and satisfactory after-sales service. We have been making persistent efforts on the basis of the original to create a brilliant future

Surface Preparation and Application Method: Dirty, dusty, swollen old painted surfaces should be cleaned and primed with Filled Primer or Polizolan. Using Filled Primer on newly plastered or plastered surfaces recommended. 2-3 hours after the primer application depending on the weather conditions between the coats. should be applied in at least two coats. Thinning / Mixing Ratio: It is diluted 25% by volume with water. Paintable (Coatable) Area Paintable (Coatable) Area: 13-15 m²/L on one floor. Drying Time: At 20°C, it provides touch dry in 15 minutes and dust holding dry in 30 minutes. Wait at least 4 hours between coats. It completes its hard drying in 4 hours. Recommended Practice

Surface Preparation and Application Method: Newly painted and old painted surfaces should be cleaned of dust and dirt, the required surface After repairs are made, a single coat of primer should be applied. 1/1 with water When thinned, it can be applied to eliminate problems related to insulation on the surface. Thinning / Mixing Ratio: Thinning is done according to the surface to be used. Label information must be followed. Paintable (Coated) Area: 60-100 m²/L depending on the absorbency of the surface when thinned at 1/7. Surface depending on its absorbency and application method. Drying Time: It completes its drying in 1 hour. Recommended Application Apparatus: Exterior, interior roller, satin roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be cleaned of any substance that will reduce adhesion. After the primer has dried (4 - 6 hours) top coat paint application is passed. Surface temperature at least 3 degrees above dew point should be high. It is necessary to wait 24 hours between coats in the final coat application. Application Temperature: Min +10°C / Max + 30°C. Thinning / Mixing Ratio: Single component / Water Addition 15 - 20% Paintable (Coated) Area: 5-6 m²/L or 3-4m²/kg (60-80 µ DFT) Drying Time: It dries to the touch in 20-30 minutes and completely dries in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: It is ready to use. Paintable (Coated) Area: 1KG 4-5 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: Thinning by Ground Paintable (Coatable) Area 8 - 10 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.