Geschweißte Stange aus Polypropylen - 78391

Die Schweißmaschine LC3000D ist für das Heißluft-Überlappschweißen von Markisen- und Bannerstoffen, homogenen und mehrlagigen Abdichtungsbeschichtungen konzipiert. Es wird bei der Herstellung von Autovorzelten, Pavillons, Zelten, Industrievorhängen, Schwimmbadabdeckungen, Luft- und Schwimmanlagen, Werbebannerstrukturen, Gebäudeabdeckungsfolien, Bodenbelägen usw. verwendet. Produktbeschreibung Nennspannung 110 V/220 V. Leistung 2000 W. Frequenz 50Hz-60Hz. Temperatur 20-700℃. Geschwindigkeit 1-6 m/min. Schweißdicke 0,2-2 mm. Schweißbreite 2-3 cm Temperaturschwankung ± 1 ℃. Heizband.⠀ Saubere, gleichmäßige Naht. Durch Einstellen der Temperatur können Sie schweißen, ohne die Farbe der Naht zu verändern. Vielseitigkeit. Ermöglicht das Schweißen von Oberflächen aller Materialien (Banner, Markisen, wasserdichte Materialien). Geschwindigkeit bis zu 8,5 Meter pro Minute. Ermöglicht ein schnelles Verschweißen von Oberflächen im Vergleich zum manuellen Verkleben von Oberflächen. Kleine Abmessungen und geringes Gewicht sorgen für komfortables Arbeiten. Reibungslose Einstellung eines Luftstroms. Automatischer Start. Das Gerät ist mit einer Laserpositionierungslinie ausgestattet, die das Schweißen perfekt und den Prozess selbst komfortabler macht. Senden an Regionen.

Вентиляционная решетка пластиковая- круглая отлично подходит для прикрытия отверстия в стене, в потолке или для закрытия вентиляционного канала Изготовлена из качественного материала ABS. Экологически чистая, прочная. Для подключения к круглым воздуховодам 125 мм, монтаж с помощью монтажного фланца

Люк ревизионный пластиковый 200х300 мм Люк-дверца ревизионный пластиковый с ручкой. Для доступа к скрытым узлам и инженерным коммуникациям. Предназначен для установки в стене или потолке. Оснащен ручкой для удобства открытия/закрытия люка. Возможно использование во влажных помещениях. Простой уход. Монтаж осуществляется при помощи раствора или клея.  

Широкофрматный Керамогранит премиум класса

Широкофрматный Керамогранит Премиум Класса

Широкофрматный Керамогранит Премиум Класса

Vorhangfassadensysteme aus Edelstahl.

Edelstahl-Klimagitter sowohl im fertigen Design als auch für eine individuelle Bestellung.

Garden path mold Round Stones 80x80x6 cm Garden paths create a chic view of the suburban area, which add tidiness and nobility.   Concrete paths are durable and very practical. They are not afraid of any atmospheric conditions and are easy to clean.   At the present time, it is possible to make a concrete path with your own hands using special forms. Such a path will not only create comfort and coziness, but also emphasize the design of your site.   Drawing - an imitation of natural stone will help to create a mold for making a garden path. Round Stones 80x80x6 cm. This plastic mold consists of 9 cells that have an arbitrary shape and are connected together. They form a certain pattern, while the shape is designed in such a way that it allows the slabs to be joined together in any direction, to obtain tracks of the required width, as well as to make turns (bends), while the joints are absolutely indistinguishable.   It is also possible to adjust the color scheme of the garden path using various additives. With this form, you can easily decorate the paths in the garden or playground and you will be satisfied with the work done with your own hands.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the shape for the garden path Round stones: Manufacturer: Hormusend Country of origin: Ukraine Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 1.56 pcs Pattern: round stones Type: garden path mold Material: wear-resistant plastic (polypropylene) Number of stones in the form: 9 pcs Finished board height: 60.0 mm Finished stone height: 60.0 mm Volume: 40 l Length: 800.0 mm Width: 800.0 mm Height: 60.0 mm Weight: 1.6kg Volume weight: 9.6 kg

Garden path mold Castle Stone 60x60x6 cm It has become easier to create comfort and coziness in the garden. You can make an unusual geometric design, similar to a composition from a natural stone, without a lot of time. You don't need to match each item individually. Simply pour the solution into the garden mold. From the resulting slabs, you can easily create a decorated walkway.   The garden path mold will serve you for a long time, as it is made of wear-resistant polypropylene. You can always use it to create an additional pedestrian zone in the garden.   The walkway will emphasize the design of your site, as the pattern is similar to a natural stone composition.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the mold for the garden path Castle Stone: Manufacturer: Hormusend Country of origin: Ukraine Type: garden path mold Material: wear-resistant plastic (polypropylene) Pattern: imitation of a wild stone Number of stones in the form: 9 pcs Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 2.78 pcs Finished board height: 20.0 mm Finished stone height: 40.0 mm Length: 600.0 mm Width: 600.0 mm Height: 60.0 mm Weight: 1.7kg

Garden path mold Castle Stone 60x60x6 cm with handles An integral element of a well-groomed garden is a garden path, which allows you to comfortably move through it and not worry about the ground sticking to your shoes.   With minimal knowledge of construction and little effort, it is easier to pour a concrete path than to lay tiles. To make it as quickly and easily as possible, use a unique modern development - a special stencil that looks like cells that realistically imitate natural stones.   An unusual geometric design will allow you to make an easy-to-use shape for a garden path Castle Stone 60x60x6 cm with handles.   The garden path mold is made of wear-resistant polypropylene and is equipped with 2 handles for convenience. You just need to pour the solution into it, and after partial hardening, the form can be removed. Provided manufacturer's warranty for up to 1000 pouring cycles.   For a unique design, it is recommended to add a color pigment directly to the solution.   Benefits of using a garden path mold: Quickness of manufacture - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the mold for the garden path Castle Stone: Manufacturer: Hormusend Country of origin: Ukraine Type: garden path mold Material: wear-resistant plastic (polypropylene) Pattern: imitation of a wild stone Number of stones in the form: 9 pcs Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 2.78 pcs Finished board height: 20.0 mm Finished stone height: 40.0 mm Length: 600.0 mm Width: 600.0 mm Height: 60.0 mm Weight: 1.7kg

Form for a garden path Old Town 60x40x6 cm A garden path on the site not only creates a beautiful view and comfort, but also is an excellent protection for your shoes from the ground, dirt and dust.   Thanks to modern technologies, it is possible to make the coating independently, which gives complete confidence in its quality.   Plastic mold Old City 60x40x6 cm for laying a concrete path will help you to model and lay your garden path or playground in the shortest possible time.   It is reusable, made of durable material - polypropylene. On the slab there are 9 decorative stones 11x18cm, the seam depth is 2 cm. The wall thickness is 4 mm, the edging of the stone is 2 mm. In places of loading, stiffeners are implemented, which allows it to withstand 1000 moldings.   To use it, it is enough to prepare a concrete solution. The shape fits well on either side, allowing you to make the track seamless.   If we compare the total costs, then a do-it-yourself garden path made of concrete, obtained using a form, will cost less than laying tiles or pebbles.   Benefits of using a garden path mold: Fast production - the solution is ready within 20-30 minutes;   Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;   Saving the budget - only the purchase of materials;   Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.   Characteristics of the form for the garden path Old Town: Manufacturer: Hormusend Country of origin: Ukraine Guaranteed number of pouring cycles: 1000 Number of molds per 1m2: 4.17 pcs Pattern: Old Town Type: garden path mold Material: wear-resistant plastic (polypropylene) Number of stones in the form: 9 pcs Finished board height: 60 mm Finished stone height: 60 mm Length: 600.0 mm Width: 400.0 mm Height: 60.0 mm