Produktbeschreibung
Es ist bekannt, dass die Verstärkung von Beton mit Stahlstäben zu einer Kombination führt, die stärker ist als jedes Material allein. Es ist auch allgemein bekannt, dass der hohe pH-Wert (Alkalität) von Beton normalerweise den Stahl vor feuchtigkeitsinduzierter Korrosion schützt. Die hohen pH-Werte von Beton – typischerweise pH 12–13 – erzeugen eine dünne Oxidschicht auf dem Stahl, die die Reaktion der Metallatome verhindert. Diese dünne Zone ist als Passivitätsschicht oder -film bekannt. Es verhindert Korrosion nicht wirklich, sondern reduziert sie stark. Diese schützende Passivitätsschicht kann zerstört werden, entweder durch Verringerung der Alkalität oder durch eine Zunahme von Chloridionen. Die Alkalinität kann durch Karbonisierung des Betons verringert werden. Dies ist ein sehr langsamer Prozess, der allgemein als Oberflächenaufhellung in alternden Strukturen angesehen wird. Chlorid ist die bekanntere Ursache für Betonkorrosion und ein ernsthaftes Problem bei Meeresstrukturen. Aus nicht vollständig verstandenen Gründen dringen Chloridionen in die Passivitätsschicht ein und machen den Stahl anfällig für Korrosion. Bezeichnenderweise haben nur wasserlösliche Ionen diesen Effekt. Kernpunkt 1: Reaktive Verunreinigungen werden durch Feuchtigkeit in den Stahl getragen. Aus diesem Grund sind geringfügige Risse und Mikrorisse im Beton, sei es durch Bewegung, geringe Schwindung der Deckschicht oder Bedingungen wie ASR oder DEF, eine sehr reale Bedrohung. Kernpunkt 2: Kleinere Risse fördern das Eindringen von Wasserdampf und feuchtigkeitsgetragenen Verunreinigungen. Hier kann PROTEX helfen. Die Anwendung eines durchdringenden katalytischen Hydrogels PROTEX kann die Porosität und Mikrorisse des Betons bis zu einer Rissbreite von bis zu 0,5 mm und einer Behandlungstiefe von bis zu 150 mm schließen! Diese Behandlungstiefe stellt sicher, dass die Bewehrungszone eingekapselt ist. Feuchtigkeit, Feuchtigkeitsdampf und durch Feuchtigkeit übertragene Verunreinigungen werden immobilisiert. Dies ist eine ernsthaft wirksame Behandlung. Durch das Auffangen der Feuchtigkeitsbewegung im Beton und insbesondere durch die frühzeitige Behandlung des Betons im Alterungsprozess kann die Korrosion aufgehalten oder sogar vollständig verhindert werden. Wenn Sie für die Budgetierung der Instandhaltung einer Struktur verantwortlich sind, werden Sie die Bedeutung sofort erkennen. Diese Behandlung trägt dazu bei, eine größere Betonzersetzung zu verhindern und die Lebensdauer der Struktur zu verlängern. Denken Sie an die Einsparungen bei Wartungs- und Austauschkosten, denken Sie an PROTEX.
Detailliert
PROTEX - durchdringendes katalytisches Hydrogel, ermöglicht es Ihnen, die Porosität und Mikrorisse im Beton zu schließen - 81861
Verfügbar
75.0
USD/Stück
75.0
USD
Minimaler Auftrag: 50 кг
Die Möglichkeit der Lieferung: 100 кг/am Tag
Technokotes
nicht überprüfter Lieferant
Indien
Versandinformationen
Berechnen und vervollständigen Sie Ihren Frachttransport mit Qoovee Logistics an jeden Ort der Welt.
Garantierter pünktlicher Versand und sichere Zahlung Qoovee LieferungÄhnliche Produkte
DINIL PLUS
Usbekistan
USD
0.6/шт
0.6
Вентиляционная решетка пластиковая- круглая отлично подходит для прикрытия отверстия в стене, в потолке или для закрытия вентиляционного канала Изготовлена из качественного материала ABS. Экологически чистая, прочная. Для подключения к круглым воздуховодам 125 мм, монтаж с помощью монтажного фланца
DINIL PLUS
Usbekistan
USD
0.8/шт
0.8
Люк ревизионный пластиковый 200х300 мм Люк-дверца ревизионный пластиковый с ручкой. Для доступа к скрытым узлам и инженерным коммуникациям. Предназначен для установки в стене или потолке. Оснащен ручкой для удобства открытия/закрытия люка. Возможно использование во влажных помещениях. Простой уход. Монтаж осуществляется при помощи раствора или клея.
ТОО ЗЛАТАРЬ
Kasachstan
USD
16.35 - 54.49/шт
Edelstahl-Klimagitter sowohl im fertigen Design als auch für eine individuelle Bestellung.
Best Choice Ukraine
Киев, Ukraine
USD
6.32/шт
6.32
Garden path mold Round Stones 80x80x6 cm
Garden paths create a chic view of the suburban area, which add tidiness and nobility.
Concrete paths are durable and very practical. They are not afraid of any atmospheric conditions and are easy to clean.
At the present time, it is possible to make a concrete path with your own hands using special forms. Such a path will not only create comfort and coziness, but also emphasize the design of your site.
Drawing - an imitation of natural stone will help to create a mold for making a garden path. Round Stones 80x80x6 cm. This plastic mold consists of 9 cells that have an arbitrary shape and are connected together. They form a certain pattern, while the shape is designed in such a way that it allows the slabs to be joined together in any direction, to obtain tracks of the required width, as well as to make turns (bends), while the joints are absolutely indistinguishable.
It is also possible to adjust the color scheme of the garden path using various additives. With this form, you can easily decorate the paths in the garden or playground and you will be satisfied with the work done with your own hands.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the shape for the garden path Round stones:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 1.56 pcs
Pattern: round stones
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 9 pcs
Finished board height: 60.0 mm
Finished stone height: 60.0 mm
Volume: 40 l
Length: 800.0 mm
Width: 800.0 mm
Height: 60.0 mm
Weight: 1.6kg
Volume weight: 9.6 kg
Best Choice Ukraine
Киев, Ukraine
USD
4.5/шт
4.5
Garden path mold Castle Stone 60x60x6 cm
It has become easier to create comfort and coziness in the garden. You can make an unusual geometric design, similar to a composition from a natural stone, without a lot of time. You don't need to match each item individually. Simply pour the solution into the garden mold. From the resulting slabs, you can easily create a decorated walkway.
The garden path mold will serve you for a long time, as it is made of wear-resistant polypropylene. You can always use it to create an additional pedestrian zone in the garden.
The walkway will emphasize the design of your site, as the pattern is similar to a natural stone composition.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the mold for the garden path Castle Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Pattern: imitation of a wild stone
Number of stones in the form: 9 pcs
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 2.78 pcs
Finished board height: 20.0 mm
Finished stone height: 40.0 mm
Length: 600.0 mm
Width: 600.0 mm
Height: 60.0 mm
Weight: 1.7kg
Best Choice Ukraine
Киев, Ukraine
USD
5.54/шт
5.54
Garden path mold Castle Stone 60x60x6 cm with handles
An integral element of a well-groomed garden is a garden path, which allows you to comfortably move through it and not worry about the ground sticking to your shoes.
With minimal knowledge of construction and little effort, it is easier to pour a concrete path than to lay tiles. To make it as quickly and easily as possible, use a unique modern development - a special stencil that looks like cells that realistically imitate natural stones.
An unusual geometric design will allow you to make an easy-to-use shape for a garden path Castle Stone 60x60x6 cm with handles.
The garden path mold is made of wear-resistant polypropylene and is equipped with 2 handles for convenience. You just need to pour the solution into it, and after partial hardening, the form can be removed. Provided manufacturer's warranty for up to 1000 pouring cycles.
For a unique design, it is recommended to add a color pigment directly to the solution.
Benefits of using a garden path mold:
Quickness of manufacture - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the mold for the garden path Castle Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Pattern: imitation of a wild stone
Number of stones in the form: 9 pcs
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 2.78 pcs
Finished board height: 20.0 mm
Finished stone height: 40.0 mm
Length: 600.0 mm
Width: 600.0 mm
Height: 60.0 mm
Weight: 1.7kg
Best Choice Ukraine
Киев, Ukraine
USD
3.68/шт
3.68
Form for a garden path Old Town 60x40x6 cm
A garden path on the site not only creates a beautiful view and comfort, but also is an excellent protection for your shoes from the ground, dirt and dust.
Thanks to modern technologies, it is possible to make the coating independently, which gives complete confidence in its quality.
Plastic mold Old City 60x40x6 cm for laying a concrete path will help you to model and lay your garden path or playground in the shortest possible time.
It is reusable, made of durable material - polypropylene. On the slab there are 9 decorative stones 11x18cm, the seam depth is 2 cm. The wall thickness is 4 mm, the edging of the stone is 2 mm. In places of loading, stiffeners are implemented, which allows it to withstand 1000 moldings.
To use it, it is enough to prepare a concrete solution. The shape fits well on either side, allowing you to make the track seamless.
If we compare the total costs, then a do-it-yourself garden path made of concrete, obtained using a form, will cost less than laying tiles or pebbles.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the form for the garden path Old Town:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 4.17 pcs
Pattern: Old Town
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 9 pcs
Finished board height: 60 mm
Finished stone height: 60 mm
Length: 600.0 mm
Width: 400.0 mm
Height: 60.0 mm
Best Choice Ukraine
Киев, Ukraine
USD
3.68/шт
3.68
Garden path mold Universal Stone 60x40x6 cm
A beautiful view of the countryside provides a decor that should be combined with the rest of the garden. Its main element is a practical and unique garden path or playground, which can be easily modeled and created with your own hands using plastic molds and a concrete grout.
An excellent solution for a plot that is decorated in a strict, classical or modern style would be the use of an unusual shape for the garden path Universal Stone 60x40x6 cm, the design of which is designed for convenient work with concrete.
It is a sturdy and secure shape with strong edges. Its feature is the presence of technological holes for handles, which is convenient when pouring large areas. During the first molding, special cavities in the inner seam are filled with mortar, which gives the form additional strength.
The drawing of the shape is two large and two small triangles. The outer frame is made in such a way that it can be easily docked even with molds from other manufacturers.
For the uniqueness of the design, it is possible to adjust the color scheme of the garden path with the help of various additives.
By making your own coating, you will be sure not only of its quality, but also of budget savings.
Benefits of using a garden path mold:
Fast production - the solution is ready within 20-30 minutes;
Individual creation of a picture - the ability to add color pigments for the uniqueness of the board;
Saving the budget - only the purchase of materials;
Ease of use - does not require special knowledge and skills, enough imagination and familiarization with training materials.
Characteristics of the form for the garden path Universal Stone:
Manufacturer: Hormusend
Country of origin: Ukraine
Guaranteed number of pouring cycles: 1000
Number of molds per 1m2: 4.17 pcs
Pattern: universal stone
Type: garden path mold
Material: wear-resistant plastic (polypropylene)
Number of stones in the form: 4 pieces
Finished board height: 60 mm
Finished stone height: 60 mm
Length: 600.0 mm
Width: 400.0 mm
Height: 60.0 mm
Weight: 1.0KG
Lieferanten Kategorie
Alle Anbieter in der Kategorie
Ware:
Lieferant:
Minim. Bestellung:
Direktion
Vertrieb:
Vertrieb:
Vertrieb:
Informationen
Informieren Sie den Manager über,dass Sie haben Waren auf Qoovee gefunden
Kontakte des Anbieters nicht verfügbar!
Schreiben an den Lieferanten