工业设备批发在 Qoovee市场

8468800000

8468800000

JHY4030A-180 HS：8479899990

JHY4030D-080 HS：8479899990

BR-1510A HS：8515809090

法律职能的自动化不是要用机器人代替专家，而是要减少例行工作并增加创作任务的数量。智能技术将无法为律师提供帮助，但是许多典型任务的解决方案已经可以加快7到10倍。例如，如果没有自动化系统，准备一个典型的索赔需要20分钟，那么使用Case.one只需3分钟。交付基础：具有军事级别保护的SAAS系统可以进行电话API集成，其他系统和数据库的集成。使用文档模板自动/手动/脚本脚本用户侧具有自定义功能的卡文档存储任务/事件/ Cleint门户（系统免费的客户端机柜，无限制）。手动或通过集成报告任何复杂性。通过联系 测试访问和演示，俄罗斯，法国，美国，德国等国家/地区的客户。

1.采用先进的PLC性能稳定，并通过传送带自动传送瓶胚。 2.通过使瓶子自身旋转并在红外预热器中同时在轨道中旋转，使渗透性强，热量分布好而迅速。 3.高度的可调节性，通过使用自动恒温装置调节预热区域中的灯管和反射板的长度以及预热器中的外部温度，从而使预热器能够预热形状的预型件。 4，每次机械动作均配有安全自动锁装置，安全性高，在某些程序发生故障的情况下，使程序进入安全状态。 5.采用气缸代替油泵驱动动作，无污染，低噪音。 6.通过在机器的气压图中将吹气和作用分为三个部分，使吹气和机械作用满足不同的大气压。 7.强大的高压夹紧力和双曲柄连杆可锁定模具。 8.两种操作方式：自动和手动。 9.阀门位置安全，可靠，独特的设计，使机器的气压图更容易理解。 10，成本低，效率高，操作简便，维护方便等。 11.避免污染瓶身。 12.采用瓶装模具的冷却系统进行冷却的理想效果。 13.易于安装和启动。 14.低废品率：小于0.2％。 15.全自动机器，一个人就可以操作机器。 16.采用新型双弯臂和四杆夹紧结构（已获专利）：横向；中模板平行移动；两个模板之间的距离由链轮调节。因此，夹紧力非常强。 17.省电设计，可以增加您的利润。 18.分离式空气控制系统，旨在避免废物污染。 19.PP吹瓶机的预热器应比PET吹瓶机的大。

Airtech动力学鼓风机（AKB）系列是动态鼓风机，它通过非接触式旋转叶轮将动能传递至介质。气体通过高性能钛涡轮叶轮吸入。最小化的内部损耗可实现极高的效率，并在高达12500 RPM的转速下实现无声压缩。切向入口和出口的位置可以根据应用需求单独选择。可靠的IE4 / NEMA超优质鼓风机电机也可提供集成插头和变频驱动器。

Tipping Bucket

Electric Motor and Tail Shaft Driven Spiral

     臭氧的应用 存储蔬菜和水果 臭氧在冷藏水果和蔬菜中的使用 农业和畜牧业 家禽养殖场的空气消毒 刺激动植物的生长和重要活动 养蜂业-对抗球虫病 在温室中使用臭氧发生器 对抗植物病 谷物处理 延长保质期并保持食品，谷物等的质量。 食品工业 用臭氧消毒空气，处所，设备和产品 臭氧在肉类和奶制品工业中的使用 食品生产消毒 饮用水和废物的清洁 游泳池水臭氧化 臭氧处理在瓶装水灌装中的应用 使用臭氧处理站去除水中的铁和锰 水产养殖-使用臭氧净化水族馆和养鱼场中的水 污水处理 洗衣，清洁，除臭 酒店，疗养院，乡村度假屋 清洁和洗车 优化洗衣 消除顽固的燃烧，烟草，油漆和其他气味 洗车 用臭氧去除石油产品

已安装，可高效，快速地去除气味，气体，油脂和湿气含量高的源中的蒸气。由AISI 304，AISI 430或镀锌钢制成。

由厚度为1-1.5毫米的冷轧钢制成，标准长度为1250毫米。

It is manufactured in standard lengths of 1.25 or 1.5 meters from galvanized steel with a thickness of 0.5-1.0 mm. By special order, it is possible to manufacture air ducts from stainless steel, from steel 1.2 mm, of any section.

Differs in increased rigidity, tightness, air tightness. Made of galvanized steel 0.5-1.0 mm. It is possible to manufacture in lengths from 100 mm to 12000 mm on request.

它用于工业和公共建筑的供气和排气通风系统。设计用于移动温度高达+ 70°C的空气或其他非爆炸性，非腐蚀性气体混合物，不含粘性物质和纤维材料，且灰尘和其他固体杂质的浓度不超过100 mg / m3。

它用于工业和公共建筑的供气和排气通风系统。设计用于移动温度高达+40°C的空气或其他非爆炸性，非腐蚀性气体混合物，不含粘性物质和纤维材料，且灰尘和其他固体杂质的浓度不超过100 mg / m3。

Supply of shut-off valves, gate valves, ball valves, gates, any construction and other equipment directly from the manufacturer Provision of advisory and other services for the implementation and development in the market of Uzbekistan and Central Asia

electric motor Vilmann Z803-2 1.5 kW 2800 rpm paws new-8.000 rubles electric motor Italy MS90L4 1.5 kW 1400 rpm feet new-8.000 rubles Busch / Siemens electric motor 1.5 kW 1425 rpm small-flange used (small) shaft 24mm-8.000rub electric motor Veg (Weg) 1.5 kW 2885 rpm flange / used paws (small) shaft 24mm-8.500rub Vem electric motor 4.0 kW 1425 rpm used paws (small) -14.000rub Vilmann electric motor 4.0 kW 2895 rpm new paws -14.500rub Siemens 5.5 kW 2915 rpm used flange shaft38mm-14.000 rubles Siemens 5.5 kW 1435 rpm used feet shaft 38mm-15.000 rubles Vem / Siemens / ABB 4.0 kW 1435 rpm used feet-14.000 rubles Siemens 7.5 kW 2910 rpm feet type132 shaft38mm-17.000 rubles Vilmann 7.5 kW 1440 rpm paws 38mm type132 used-13.500 rubles Siemens 3.0 kW 1435 rpm second-hand paws-10.000 rubles KSB / Siemens 3.0 kW 1425 rpm used flange -9.500 rubles Siemens 3.0 kW 1440 rpm new flange-12,000 rubles Mez / Siemens 3.0 kW 1425 rpm used paws-8.000 rpm USSR 3.0 kW 1410 rpm used paws -7,500 rubles ABB 5.5 kW 2885 rpm paws used (bearings need to be replaced) -13.000 rub Siemens 2.2 kW 2885 rpm paws shaft 24mm used - 7.000 rubles USSR 2.2 kW 2885 rpm paws shaft 22mm used (small / super condition!) - 6.500 rubles post-USSR 2.2 kW 2885 rpm paws shaft 22mm used - 6.000 rubles USSR (Uralelectro) 4.0 kW 1410 rpm used feet (bearings that fit) -8.000 rubles Mogilev 3.0 kW 2885 rpm new flange (stored for 15 years) -6.500 rubles Lafert (Spain) 2.2 kW 2895 rpm flange used (not enough) -10.000 rubles Uralelectro ADM 2.2 kW 1410 rpm paws almost new (connected, did not fit in power) -7.500 rubles

Fastening of the axle bridge (bridge-frame) to the emergency tank is carried out by means of two magnetic blocks М250, similar to used in the "Console" unit. The magnetic blocks are hingedly held together to the housing, inside of which the carriage moves along the guides with the sealing unit, which includes a press-screw and a rubber element.The set of delivery includes two types of sealing element: a cone and a gasket with diameters of 20 mm. Replacing one sealing element with another takes no more than 3 seconds.A cone is used to seal round gaps and holes, and a flat gasket is used for cracks or a group of small fistulas. Due to the movements of the carriage relative to the body and the sealing unit relative to the carriage, the sealing element is supplied directly to the leakage.The "aiming" zone is a 50x50 mm square surface. The surface to which the magnetic grippers will be attached is must be cleaned from dirt and coating.Product technical characteristics:Type - Bridge-frame (axle bridge) unitPressing force of the magnetic blocks to the metal surface - Not less than 2 * 250 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmThe maximum diameter of the sealed gap - At a pressure of 60 atm - not less than 7 mmInstallation time, min - 1-2Required number of workers - 1-2Dimensions, mm - 347x111x151Weight, kg - 5.4Service life - At the very least 10 years.

Monoblock unit М180, intended to exclude emergency leaks at relatively low pressures in emergency tanks.Between the magnetic blocks placed screw with a rubber sealing gasket. By applying a screw, the sealing gasket can be moved up or down relative to the unit.The monoblock unit is placed on the damaged container so that the leak will be under the rubber gasket. By rotating the handle, the plate with a rubber gasket is pressed on the defective place until the leak eliminates.The monoblock unit is removed by rotating the same handle in the same direction.Product technical characteristics:Type – Monoblock unitPressing force of the magnetic blocks to the metal surface - Not less than 150 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmMaximum diameter of the sealed gap - At a pressure of 5 atm - not less than 10 mmInstallation time, min - 0.5Required amount of workers - 1Dimensions, mm - 90x41x90Weight, kg - 0.8Service life - At the very least 10 years.

The K250 console is a permanent magnet device with controlled forceof the gravity. In the "off" condition, the console develops a force of attraction equal to 15-18 kgf. The presence of this force simplifies the installation of the console on the object: the console can be simply "sticked" to the damaged object. The sealing unit is installed on a carriage, which makes it possible to bring the sealing element directly on the leak. The carriage provides the ability to move the sealing unit in the longitudinal direction by a stroke of 15 mm, in the transverse direction - 20 mm and tilt the sealing unit in the longitudinal in the range of angles from 90 to 45 degrees. The set of delivery includes two types of sealing element: a cone and a 20 mm gasket. Replacing one sealing element with another takes just few seconds. A cone made for sealing round holes, and a flat gasket made for cracks or a group of small fistulas. The console is installed near the leak. The surface to which the magnetic block will be attached must be cleaned from dirt and coating. By rotating the handle, the magnetic block is "turned on". The sealing element need to bring to the hole to seal and the leak is can be eliminated by rotating the screw. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 250 kgf Diameter of the sealed tank (pipeline) - Not less than 400 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 10 mm The range of inclination of the sealing unit in the longitudinal plane - From 90 to 45 degrees Installation time, min - 1-2 Required amount of workers - 1-2 Dimensions, mm - 275х121х151 Weight, kg - 3.4 Service life – At the very least 10 years.

The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!

electric motor EMC (Italy) MS132S1-2 5.5 kW 2910 rpm new paws - 18.000 rubles many other new and used motors are available call / specify

electric motor Wilmann Z112M2-4 5.5 kW 1435 rpm new paws-17.000 rubles in the presence of many others .. call specify

GDR (USSR) KMR100S4 electric motor 3.0 kW 1430 rpm in good condition-10.000 rubles Siemens / Mez 3.0 kW 1425 rpm second-hand paws-8.000₽ Siemens 3.0 kW1435 rpm second-hand paws - 10.000₽ Siemens 3.0 kW 1435 rpm new flange-12.000₽ Siemens / Vem 4.0 kW 1440 rpm second-hand paws - 14.000₽ USSR 3.0 kW 1410 rpm used flange-7.500₽ USSR 2.2 kW 940 rpm second-hand paws - 5.500₽ VEM 3.0 kW 1440 rpm paws new-12.000₽ ADM (uralelectro) 2.2 kW 1420 rpm paws -7.500₽ Siemens 5.5 kW 2885 rpm flange -14.000₽ Wilmann 7.5 kW 1440 rpm shares used-13.500₽ USSR 2.2 kW 2880 rpm used paws (ideal) -6.500₽ veg 1.5 kW 2885 rpm paws / flange used-8.500₽ USSR (Uralelectro) 4.0 kW 1410 rpm second-hand paws (not very bearings) -8.000₽ Mez / Siemens 5.5 kW 1435 rpm paws -12.000₽ Siemens 4.0 kW 1430 rpm paws on two shafts new-13.000₽ EMC (ITALY) type112 shaft 28mm 5.5 kW 1440 rpm paws new-17.000₽ EMC (ITALY) 7.5 kW 1440 rpm paws new-18.000₽ Brook (england) 5.5 kW 1450 rpm paws new-17.500₽ Wilmann 4.0 kW 2890 rpm paws new-14.000 rubles Wilmann 4.0 kW 2890 rpm second-hand paws - 12.000 rubles Wilmann 5.5 kW 2880 rpm paws new-18.000 rubles NO BIDDING! PRICE FINAL! Don't even try to bargain !!! there are many motors available, we call / check ...

应用：变压器内部的油主要起绝缘作用，此外，它们还具有抑制电晕放电和电弧的作用，还可以作为机器内部的制冷剂。这些油必须绝对清洁和干燥，以实现并保持最佳的绝缘性能和介电强度。这就是变压器油净化的需要。 ASSEN ZYD 变压器油净化器是变压器可靠性、性能和耐用性的关键。变压器的绝缘油必须不含水分、溶解的气体和随着油老化而积累的颗粒。甚至一些新油也可能需要加工以将其含量限制在可接受的水平。特点： 1. 对高效绝缘油处理厂的期望。 2、适用于大型电力变压器安装维修中的油处理、油抽真空和热油循环。 3. 操作简单无故障。 4、工艺参数在线测量和记录。处理后 水分 PPM 3 气体含量% 0.01 杂质尺寸 µm ≤ 1（无游离碳） 击穿电压 kV ≥ 75 IFT 达因 / cm ≥ 40 酸值 mgKOH / g ≤ 0.03 介电损耗因数 tan δ (90 °C) ≤ 0.001 ASSEN保证根据本规范提供的设备在正常使用和服务下不会出现材料和工艺缺陷，自发货之日起二十六 (26) 个月或启动后二十四 (24) 个月。系统。 ... ASSEN 在本保修条款下的义务仅限于修理或提供类似部件以更换在保修期内被证明有缺陷的任何部件。 1.我们根据您的要求定制机器。 2. 我们有超过 20 年的出口经验。 3. 我们以有竞争力的价格为客户提供高质量的产品。 4. 我们为客户提供优质的售后服务。 5.我们不满意，直到我们的客户满意。

Brook electric motor (England) WDA112MB-4 112 5.5 kW 1450 rpm feet new shaft 28mm-17.000 rubles Electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new-14.000 rubles electric motor Wilmann Z112M2-4 5.5 kW 1435 rpm shaft 28mm-17.000 rubles no bargaining! in the presence of many different motors call / specify

electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new shaft 28mm-14.000 rubles without bargaining! in the presence of a large number of motors! call to specify!

Diode bridge VAZ-2110-12 gen. 9402, 9412 (Orbit) Article: BVO 3 105-01 Manufacturer: Orbit

Brazil Santos 100% Arabica is a true classic from Brazil in beans. Perhaps this is the most popular type of coffee, which has a mild pleasant taste with notes of nuts, caramel and chocolate, without acidity. Medium roast. Convenient packaging - a multi-layer quadropack bag with a zipper and a degassing valve - the most perfect packaging for coffee at the moment, not only will it retain its aroma and taste for a long time, but will also make it convenient to pour and store coffee. It is perfect for preparing in a professional or automatic espresso machine, a geyser coffee maker, as well as alternative methods - for example, in a pourover. Below is one of the recipes for brewing this coffee. Espresso recipe: Coffee bookmark: 18 grams. We adjust the grinding so that when it spills for about 27 seconds, 37 grams of the finished drink (from the cream) are obtained at the exit. Store coffee at a temperature no more than 25 degrees and a humidity of no more than 75% in a dry and cool place.

The company strictly implements enterprise standards (CH series hot-melt pipe butt joint machine Q / ZJCH 002-2017; plastic pipe hot-melt butt joint Q / ZJCH 001-2017). The products have been tested by the national authority, and the mechanical properties are rationalized Frequency: 50-60HZ Welding Area: ≤ Pipe wall thickness Dimensions: 1000-1200mm Usage: Plastic Welding,Fitting Warranty: 1 year, 1 Year

Our relation with this estate goes back to the days when our founder (with literally no money) hopped on to bikes and traveled to this estate just to establish a strong direct and transparent bond. Roasting Profile- Espresso Varietal- SLN-795 Altitude- 1524 MASL Process- Washed Harvest Year- 2020-21 Tastes Like- White Chocolate, Hint Of Clove And Caramel Location- Chikmagalur

YH-116AE : Fully Electronic Covering Machine * Taking the highest electronic technology to change from mechanical type into fully automatic computerized operation. * Operation become simple, the consumption of machine parts was reduced noise is less and the data output from the computer is accurate.   Introduction:  Elongation, twisting , tension of take up tube and tension of take up Forming all are taking high technology servo motor with PLC control , Meantime, machine running with gear belt type which has the highest quality.  Machine noise is less and speed increasing due to use gear type belt instead of metal gear.  Using delicate servo motor, the products twisting range can be higher than using metal gear.  Using delicate electrical forming device, the take up tube forming range can be adjusted easily and widely, the forming edge can be softer.  Machine layout: 2500 + (1840 x N) x 1500mm x 2200mm N = No. of section

WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.

P01854-3 Features 1. Reducer: Heavy duty machinery reducer. 2. Break System: Pull down the release lever, rolling door will close down. 3. Limited Switch: Combine with 2 limit switch for higher rolling door.   Specification: Model     D20 Horsepower    2HP/1.5kw Poles       4 Voltage    3Ø-220V/380V Ammeter 5.77A/3.34A Load        1800KG/6” Weight    69KG Dimensions     730×290×470 DecelerationRatio  120 RPM 60HZ/14.2RPM Driver Gear / Driven Gear      Double Gear 60×15T→60T Single Gear 80×12T→46T

P00663                          Pai-Hong Sliding Gate Operator (also referred to as slide gate openers or slide gate motors) is suitable for Residential, Commercial and industrial use, command a modernization of convenient lifestyle. The demand for high technology, versatility and reliability is the trend today. If you are looking for a gate operator that manipulate gates by sliding them left or right horizontally along a track a Slide Gate Operator is a great fit for your needs. Worm gear driven with manual override and weatherproof feature ensure long lasting and convenient usage.   For your safety, the safety edge is optional. It will stop and reverse if is encounters an obstruction on closing and stop when it encounters an obstruction on opening.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.