Produktbeschreibung
DEVICE AND PRINCIPLE OF OPERATION. The set consists of a stomach processing machine - which separates the stomach from the intestines, cuts the stomach and partially empties the stomach, stomach cleaning machines - which cleans the outer surface of fat, and the inner one from the contents of the washing screw, which carries out the final washing of the cut stomachs and their transportation to the cuticle remover machine, on which two operators remove the cuticles from the stomachs. The entrails removed from the carcasses along with the muscle stomachs are fed by a conveyor, a hydraulic drift or manually into the receiving hopper of the E-784 machine. The machine consists of a frame on which the working shafts are installed on three bearing supports, consisting of an initial section, helical gears and an end section. The working shafts are driven by a geared motor. In the initial section, a guide is installed above the shafts, and in the final section above the shafts, a limiter is installed, and under the shafts there is a supporting unit and a rotating disc knife, cantilevered on the electric motor shaft. The guide and stop are installed on the frame wall in prismatic guides, which allows them to be quickly set in the desired position or removed altogether. The electric motor is installed on a plate, which is installed in prismatic guides, which allows, using an adjusting screw, to move the electric motor and, consequently, the circular knife vertically for installation in an optimal position. Drives and working shafts are covered with covers. There is a tray at the exit of the machine to receive cut stomachs and feed them into the stomach cleaning machine. The middle bearing support is made on rubber plain bearings. This support is supplied with cold water to lubricate the bearings. Always open the water supply valve to the bearings before starting the machine. The same tap simultaneously opens the water supply to the guide and the cleaning unit. The stomach cleaning machine consists of a body, on the side of which there is a loading funnel, a shaft with fingers located on it is installed inside, the body is mounted on supports, which have the ability to adjust in height, a grate is installed inside the body, through the grooves of which the removed fat and stomach contents are discharged, the body is closed with a lid on which fingers and a pipeline for water supply are installed. The shaft is driven by a drive. The drainage of water with fat and stomach contents occurs through the pipe. The stomachs from the machine are fed through the casing chute into the washing auger. The auger consists of a casing, in which a screw shaft connected to a gear motor is installed in rolling bearings, supports, a pipe for water supply and an unloading chute that stomachs on the table of the cuticle removing machine. The cuticle removing machine consists of a frame on which a drive is installed, containing a gear motor and a chain transmission that transmits rotation to two pairs of spiral work rollers mounted in slide bearings of the supports . The machine table protects the machine drive at the same time. There is a funnel in the table through which the stomachs with the cuticle removed are fed to the giblets pumps or containers. A pipeline is installed in the supports for supplying water to the working rollers. The cleaned stomachs are fed into the container through a funnel. The set works as follows. The entrails taken from the carcasses, along with the muscle stomachs, are uniformly fed by a conveyor, a hydro-channel or manually into the receiving hopper of the stomach processing machine on the initial section of the working shafts. The rotating shafts push the intestines down, while the stomach remains above the shafts and moves along the helical line of the shaft to the gears under the guide, from which water is continuously supplied to the shafts and gears, the gears separate the intestines from the stomach with teeth (the intestines fall down into the receiving hopper of the system transportation of technical waste) and the stomach is transferred to the final section, where it is captured by the cavities formed by the shaft screws and fed to the rotating disc knife. At the same time, the stomach is bounded from the sides by the working shafts, from above by a limiter, and from below by a supporting unit. The cut stomach is pressed by the wheel by the incision site against the pipe of the support unit, into which water is continuously supplied, washed with water and ejected by the augers of the shafts onto the tray, from which it enters the stomach cleaning machine. Through the feeding funnel, the stomachs enter the body , where with the fingers on the shaft they are pulled through the fingers fixed on the lid, thus, fat and the remains of the contents of the stomachs are retained by the motionless fingers. The stomach cleansing machine is installed with a 20 mm inclination towards the discharge side, so the stomachs move along the grate to the discharge opening. The water supplied through the pipeline washes away the fat and contents from the fixed fingers and the walls of the grate, through the branch pipe it is discharged into the workshop sewer. From the discharge opening the stomachs enter the washing screw. The screw shaft moves stomachs up to the tray, while water is continuously fed into the tube, finally flushing the stomachs. The washed stomachs fall on the working table of the cuticle removal machine The operator takes the cut and washed stomach and applies the edge of the stomach with either side to one of the two pairs of work rollers. The rollers grip the cuticle with their teeth and pull it down, while the stomachs remain on top of the rollers, moving along the helix of the rollers. The removed cuticle is washed off the rollers with water into a tray with a funnel, and the cleaned stomachs are dumped by the operator into the funnel.
Detailliert
richtigstellen Sie die Anwesenheit
7322.96
USD/Stück
7322.96
USD
Minimaler Auftrag: nicht gezeicht
Die Möglichkeit der Lieferung: nicht gezeicht
Компания «ДиПиПром», г.Александров
nicht überprüfter Lieferant
Russland
Versandinformationen
Berechnen und vervollständigen Sie Ihren Frachttransport mit Qoovee Logistics an jeden Ort der Welt.
Garantierter pünktlicher Versand und sichere Zahlung Qoovee LieferungÄhnliche Produkte
ООО Артмаш
Ukraine
Klären Sie Preis
USD
ООО "Артмаш" предлагает шнек точной загрузки со смесителем собственного производства. Это новая разработка нашего завода, созданная специально для тех, кто не имеет возможности купить шнек точной подачи и смеситель по отдельности, либо не может разместить их в одном помещении.
Покупая шнек+смеситель вы получаете ту же производительность и экономите 35 500 гривен. Изделие рассчитано на использование в составе линий производства кормовых гранул и топливных пеллет.
Шнек не боится попадания мусора в сырье для пеллет, обеспечивает высокую производительность линии до 3 т/ч.
Модель шнека с регулировкой оборотов двигателя снабжена червячными редуктором. Смеситель позволяет приготовить однородную смесь (96%) из корма, биодобавок, премикса, витаминов.
Смешивание происходит в течение 6 минут, возможна эксплуатация в непрерывном режиме. Выгрузка переработанного сырья осуществляется в торце, что позволяет использовать в комплекте шнек дозированной подачи, после чего ее можно отправить на гранулирование.
Управление смесителем кормов производится 1 оператором. Горизонтальный смеситель поможет насытить корм полезными добавками, сбалансировать рацион животных, обеспечить прирост здорового скота, птицы.
Характеристики шнека точной загрузки со смесителем:
Напряжение: 380 В
Размеры: В2800хШ750хД1600 мм
Вес: 200 кг
Производительность: до 3000 кг/час
Мощность мотора шнека подачи: 0,55 кВт
Мощность мотора смесителя: 2,2 кВт
Объем бункера: 0,6 кубометра
ООО Артмаш
Ukraine
Klären Sie Preis
USD
Производитель сельхозоборудования ООО "Артмаш" предлагает горизонтальный смеситель комбикорма с двумя встречными ленточными мешалками.
Позволяет приготовить однородную смесь (96%) из корма, биодобавок, премикса, витаминов.
Смешивание происходит в течение 6 минут, возможна эксплуатация в непрерывном режиме.
Выгрузка переработанного сырья осуществляется в торце, что позволяет использовать в комплекте шнек дозированной подачи, после чего ее можно отправить на гранулирование.
Управление смесителем кормов производится 1 оператором.
Горизонтальный смеситель поможет насытить корм полезными добавками, сбалансировать рацион животных, обеспечить прирост здорового скота, птицы.
Характеристики горизонтального смесителя для производства комбикормов:
Мотор: 4 кВт;
Объем бункера: 0,6 кубических метра;
Производительность: 1 тонна в час;
Вес: 280 кг.
Размеры: ДхШхВ 1702*750*1900 м.
ООО Артмаш
Ukraine
Klären Sie Preis
USD
Filz für die Papierherstellung umfasst: Pressfilz, BOM-Filz, MG-Filz, Pick-up-Filz, Schuhpressfilz, Combi-Pressfilz, genähter Filz. Papiermacherfilz hat eine gute Anpassungsfähigkeit, eine glatte Oberfläche, einen geringen Dampfverbrauch, eine lange Lebensdauer und eine gute Wasserfiltrationsleistung, wodurch das Papier eine superfeine Oberfläche erhält. Papierherstellungsfilz Funktionsprinzip: In der Pressenpartie einer Papiermaschine wird dem neu geformten Blatt Wasser entzogen. Das Papierblatt wird von einem Presstuch zwischen zwei Walzen getragen, von denen Wasser durch Anwenden von Druck entfernt wird. es kann auch durch die Verwendung von Vakuum und Wärme ergänzt werden. Papierherstellungsfilz Klassifikation Ein Pressfilz für die Press- oder Entwässerungspartie einer Papiermaschine besteht aus einem inneren Gewebe und einer Vielzahl von sich in Längsrichtung erstreckenden, in Querrichtung beabstandeten schweren Garnen oder Streifen, die von einem Sieb auf der Unterseite des Gewebes getragen werden. ein relativ leichter Maschinenquerfaden oder Binderzug, der schwere Stränge mit den Kettfäden des Gewebes verbindet. Es ist eine Art Wertstoff in der Papierindustrie. Es kann je nach Anwendungsbereich in drei Typen unterteilt werden: Nassfilz, Oberfilz und Trockenfilz. Es gibt zwei Serien von Pressfilzen für die Papierherstellung auf dem Markt, Endless Press Felt und Stitched Press Felt, und Endless Press Felt kann je nach Struktur in einige Typen unterteilt werden: Single Layer Felt, Double Layer und Laminated Layer. Papierherstellungsfilz Merkmal 1. Hohe Antikompressionskapazität. 2. Extrem hohe Elastizität und Rückstellfähigkeit. 3. Starke Entleerbarkeit und größeres Hohlraumvolumen. 4. Langzeitverschleißfestigkeit und plastische Festigkeit des Filzes. 5. Glatte Filzoberfläche und gleichmäßige Druckverteilung. Weitere Einzelheiten kontaktieren Sie uns: Huatao Group - Papiermaschinen und Stoffe
ООО Артмаш
Ukraine
Klären Sie Preis
USD
Завод "Артмаш" предлагает вам противоточный охладитель пеллет собственного производства. Охладительная колонка предназначена для охлаждения гранул, поступающих из гранулятора. Оборудование является охладительной колонкой противоточного типа. Это значит, что воздух проходит через весь слой гранул, одновременно избавляя их от излишка влаги.
Благодаря прохождению гранул через охладительную колонку их температура понижается от 70-90 градусов по Цельсию (на выходе из гранулятора) до 15-20 градусов.
Комплект поставки:
• охладительная колонка с вибростолом;
• вентилятор антипылевой нагнетающий ;
• вентилятор отсасывающий пыль;
• шкаф управления;
• транспортер ковшовый (наклонный или нория).
Основные параметры охладителя пеллет:
Напряжение: 380 В;
Длина в сборе: 4000 мм;
Ширина: 1100 мм;
Высота: 2500 мм;
Вес: 550 кг;
Обьем загрузки бункера: 1 куб. м;
Суммарная мощность двигателей (4 шт.): 3,85 кВт;
Производительность: до 1000 кг/час.
ООО Артмаш
Ukraine
Klären Sie Preis
USD
ООО "Артмаш" предлагает вам гранулятор корма 380 В, 11 кВт собственного производства, а также грануляторы других мощностей. Основные преимущества нашего универсального гранулятора:
+ матрица (фильера) изготавливается из стали 20Х с последующей цементацией в термопечи. Достигается твёрдость поверхностного слоя металла, а также стенок отверстия 62 HRC (твёрдость подшипника) что обеспечивает износостойкость на годы работы гранулятора; ролики изготавливаются аналогичным способом как и матрица;
+ в механизме использована эвольвентная косозубая зубчатая передача. По сравнению с прямозубчатыми колёсами при косозубой передаче достигается значительно меньший уровень шума изделия, а также большая долговечность передачи; во избежание перегрузки двигателя нами предусмотрено тепловое реле, которое своевременно отключит двигатель в случаи его перегрева;
+ каждый гранулятор перед покраской и продажей проходит испытания на наличие дефектов с последующим их устранением; все узлы делаются на собственном производстве с проверкой ОТК. детали, которые подвергаются большим нагрузкам, изготавливаются из легированных сталей с последующей термообработкой. Видео с отзывами наших клиентов
Характеристики гранулятора корма 380 В, 11 кВт:
- Напряжение: 380 В;
- Мощность двигателя: 11 кВт, 1500 оборотов;
- Производительность:
+ зерновые корма 150-200 кг/час, солома 100 кг/час,
+ шелуха подсолнечника 150-200 кг/час;
- Диаметр гранул: 2-8 мм;
- Диаметр матрицы: 200;
- Вес гранулятора: 230 кг;
- Размеры: Д1050*Ш400*В1000 мм.
ООО Артмаш
Ukraine
Klären Sie Preis
USD
0
0
ООО "Артмаш" предлагает вам гранулятор пеллет 380 В, 11 кВт собственного производства.
Основные преимущества нашего универсального гранулятора:
• матрица (фильера) изготавливается из стали 18ХГТ с последующей цементацией в термопечи. Достигается твёрдость поверхностного слоя металла а также стенок отверстия 62 HRC (твёрдость подшипника) что обеспечивает износостойкость на годы работы гранулятора; ролики изготавливаются аналогичным способом как и матрица;
• в механизме использована эвольвентная косозубая зубчатая передача. По сравнению с прямозубчатыми колёсами при косозубой передаче достигается значительно меньший уровень шума изделия а также большая долговечность передачи;
• во избежание перегрузки двигателя нами предусмотрено тепловое реле, которое своевременно отключит двигатель в случаи его перегрева; каждый гранулятор перед покраской и продажей проходит испытания на наличие дефектов с последующим их устранением;
• все узлы делаются на собственном производстве с проверкой ОТК. детали, которые подвергаются большим нагрузкам, изготавливаются из легированных сталей с последующей термообработкой.
Характеристики гранулятора пеллет 380 В, 11 кВт:
Напряжение: 380 В;
Мощность двигателя: 11 кВт, 1500 оборотов;
Производительность: 200-300 кг/час;
Диаметр гранул: 6-8 мм;
Диаметр матрицы: 200;
Вес гранулятора: 230 кг;
Размеры: Д1050*Ш400*В1000 мм.
ООО Артмаш
Ukraine
Klären Sie Preis
USD
0
0
Производитель сельхозборудования ООО "Артмаш" предлагает измельчитель сена 380 В, 18,5 кВт с циклоном или без него. Модель предназначена для промышленных предприятий, отличается повышенной производительностью.
Функции:
• переработка трав (камыш, солома, люцерна, сено);
• приготовление кормовых смесей; подстилки под животных;
• производство брикетов и топливных пеллет.
Все узлы делаются на собственном производстве с проверкой ОТК. Детали, которые подвергаются большим нагрузкам, изготавливаются из легированных сталей с последующей термообработкой.
Основные параметры измельчителя для сена 380 В, 18,5 кВт:
Напряжение: 380 В;
Мощность двигателя: 18,5 кВт, 3000 оборотов;
Производительность: 800-1000 кг/час;
Диаметр сетки: 6 или 8 мм;
Вес: 250 кг;
Размеры: В1450*Д1000*Ш1050 мм.
ООО Артмаш
Ukraine
Klären Sie Preis
USD
0
0
The manufacturer of agricultural equipment LLC Artmash offers a grain chopper 380 V, 15 kV with a cyclone and vacuum cleaner. The ARTMASH 311-2 model is intended for industrial enterprises, it allows to process a large amount of feed per unit time. A vacuum cleaner for grain saves workers, and a cyclone ensures the purity of the finished product. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels, followed by heat treatment. Video with reviews of our customers Grinder for grain 380 V, 15 kW with a cyclone and a vacuum cleaner "ARTMASH 311-2" Main parameters: Voltage: 380 V; Engine power: 15 kW, 3000 rpm; Productivity: 1000-1500 kg / h; Mesh diameter: 4 or 6 mm; Weight: 180 kg; Dimensions: V2200 * D2000 * W1500 mm.
Ozaday Agricultural Machinery
Istanbul, Türkei
Klären Sie Preis
USD
0
0
Fertilizer Spreading Machine
Lieferanten Kategorie
Alle Anbieter in der Kategorie
Ware:
Lieferant:
Minim. Bestellung:
Direktion
Vertrieb:
Vertrieb:
Vertrieb:
Informationen
Informieren Sie den Manager über,dass Sie haben Waren auf Qoovee gefunden
Kontakte des Anbieters nicht verfügbar!
Schreiben an den Lieferanten