Öffnen Sie Chat

Andere ausrüstungen und maschinen Großhandel auf Qoovee Market

USD 2000.0/шт 2000.0
Spezifikation: 1.          Modell:     HS-6L 2.          Produktname:         6L Elektrokessel 3.          Kapazität: 6L 4.          Stromspannung:    110 V / 220 V, 50/60 Hz 5.          Abmessungen:      B28 cm x T26 cm x H52 cm      6.          Energieverbrauch:       Heiße 750 W.   Feature: 1.          LED-Temperaturanzeige: LED-Temperaturanzeige für warmes / kaltes / kaltes Wasser 2.          Heißwassertemperatureinstellung: Einstellbare Heißwassertemperatur.        
USD 2000.0/шт 2000.0
Spezifikation: 1.          Modell      HM-190 2.          Produktname HOT / WARM / COLD Dispenser 3.          Kapazität   Heiß 2L / Warm 2.2L / Kalt 2.8L 4.          Stromspannung     110 V / 60 Hz; 220V   50 ~ 60 Hz 5.          Abmessungen       B26cm x T54cm x H58cm 6.          Energieverbrauch        Heiß 500 W, kalt 130 W. 7.          Filter Typ        5-stufige eingebaute Umkehrosmose 8.          UV-Sterilisationssystem: optional     Feature: 1.          Kontinuierliches Wasser: Drücken Sie eine Taste. Kontinuierliche Wasserausgabeeinstellung bis zu 60 Sekunden.    2.          Klare Anleitung: Benutzerfreundliches Design mit Tastenanzeige.    3.          Re-Boil-Einstellung: Re-Boil-Einstellung für hohe Temperaturanforderungen. 4.          LED-Temperaturanzeige: LED-Temperaturanzeige für warmes / kaltes / kaltes Wasser.    5.          6-stufige Warmwassertemperatureinstellung: Einstellbare Warmwassertemperatur.    6.          Wassermangelwarnung: Wassermangelwarnung mit einem Fehlercode zur Vermeidung von Überhitzung. 7.          Kaltwassertemperatureinstellung: Einstellbare Kaltwassertemperatur.
USD 2000.0/шт 2000.0
Spezifikation: 1.          Modell:     HM-6991 2.          Produktname:         Schreibtisch HOT / WARM / COLD Spender 3.          Kapazität: Heiß 2,5 l / Warm 12 l / Kalt 1,2 l 4.          Stromspannung:    110 V / 60 Hz; 220V   50 ~ 60 Hz 5.          Abmessungen:      B39cm x T41cm x H68cm 6.          Energieverbrauch:       Heiß 750 W, kalt 130 W.   Feature: 1.          Wassermangelwarnung: Wassermangelwarnung mit einem Fehlercode zur Vermeidung von Überhitzung.    2.          Kaltwassertemperatureinstellung: Einstellbare Kaltwassertemperatur.    3.          Re-Boil-Einstellung: Re-Boil-Einstellung für hohe Temperaturanforderungen.
USD 2000.0/шт 2000.0
Spezifikation: 1.          Modell:         HM-700 2.          Produktname:     HEISSER, WARMER, KALTER Spender 3.          Kapazität:      Heiße 15L, warme 7L,   Kalt 3L 4.          Stromspannung:        110 V / 60 Hz; 220V   50 ~ 60 Hz 5.          Abmessungen: B42 cm x T41 cm x H127 cm 6.          Energieverbrauch:   Heiß 1100 W, kalt 100 W. 7.          Filter Typ:         (1) 2-stufige Filtration (1. PP-Sedimentfilter, 2. Aktivkohlefilter) (2) Umkehrosmose (mit NSF-Zertifikat)   Feature: 1.          Wassermangelwarnung: Wassermangelwarnung mit einem Fehlercode zur Vermeidung von Überhitzung.    2.          LED-Temperaturanzeige: LED-Temperaturanzeige für warmes / kaltes / kaltes Wasser.    3.          Re-Boil-Einstellung: Re-Boil-Einstellung für hohe Temperaturanforderungen. 4.          Klare Anleitung: Benutzerfreundliches Design mit Tastenanzeige.    5.          Kaltwassertemperatureinstellung: Einstellbare Kaltwassertemperatur.    6.          Kontinuierliches Wasser: Drücken Sie eine Taste. Kontinuierliche Wasserausgabeeinstellung bis zu 60 Sekunden.
USD 2000.0/шт 2000.0
Spezifikation: 1.          Modell: HS-990 2.          Produktname:       HEISSER / WARMER / KALTER DIGITALER WASSERSPENDER 3.          Kapazität: Hot22L / Warm8L / Cold4L 4.          Stromspannung:    110 V / 220 V; 50 ~ 60 Hz 5.          Abmessungen:      B43 cm x T47 cm x H135 cm 6.          Energieverbrauch:       Heiße 1100 W,   Kalt 130 W. 7.          Filter Typ:       5-stufige Umkehrosmose (LG. RO-Membran)   Feature: 1.          ECO-Standby: Diese Funktion kann je nach Lebensstil des Benutzers angepasst werden. 2.          Kontinuierliches Wasser: Drücken Sie eine Taste. Kontinuierliche Wasserausgabeeinstellung bis zu 60 Sekunden. 3.          Wassermangelwarnung: Wassermangelwarnung mit einem Fehlercode zur Vermeidung von Überhitzung. 4.          LED-Temperaturanzeige: LED-Temperaturanzeige für warmes / kaltes / kaltes Wasser 5.          Klare Anleitung: Benutzerfreundliches Design mit Tastenanzeige. 6.          Kaltwassertemperatureinstellung: Einstellbare Kaltwassertemperatur. 7.          LED-Licht: LED-Licht, das die Position des Wasserauslasses anzeigt, um Gefahren zu vermeiden. 8.          Re-Boil-Einstellung: Re-Boil-Einstellung für hohe Temperaturanforderungen.
USD 1.0/шт 1.0
1.Stabile Leistung mit fortschrittlicher SPS und automatisches Fördern von Preforms mit Förderband. 2. Starke Durchlässigkeit und gute und schnelle Verteilung der Wärme, indem die Flaschen sich selbst drehen und sich gleichzeitig im Infrarot-Vorwärmer in den Schienen drehen. 3. Hohe Einstellbarkeit, damit der Vorwärmer Vorformlinge in Formen vorheizen kann, indem der Lichtschlauch und die Länge der reflektierenden Platte im Vorheizbereich und die ewige Temperatur im Vorwärmer mit einem automatischen Thermostatgerät eingestellt werden. 4. Hohe Sicherheitsvorkehrungen mit automatischer Sicherheitsverriegelung bei jeder mechanischen Aktion, wodurch die Verfahren im Falle eines Ausfalls in einem bestimmten Verfahren in einen Sicherheitszustand versetzt werden. 5. Keine Verschmutzung und geringe Geräuschentwicklung mit dem Luftzylinder, um die Aktion anstelle der Ölpumpe anzutreiben. 6. Zufriedenheit mit unterschiedlichem atmosphärischen Druck für das Blasen und die mechanische Wirkung durch Aufteilen des Blasens und der Wirkung in drei Teile im Luftdruckdiagramm der Maschine. 7. Starke Klemmkraft mit hohem Druck und doppelten Kurbelgliedern zum Verriegeln der Form. 8. Zwei Betriebsarten: Automatisch und manuell. 9. Sicheres, zuverlässiges und einzigartiges Design der Position des Ventils, um das Luftdruckdiagramm der Maschine verständlicher zu machen. 10. Niedrige Kosten, hohe Effizienz, einfache Bedienung, einfache Wartung usw. 11. Eine Kontamination des Flaschenkörpers wird vermieden. 12. Ideale Wirkung des Kühlens mit dem Kühlsystem für die Flaschenform. 13. Einfache Installation und Start. 14. Niedrige Ablehnungsrate: weniger als 0,2 Prozent. 15. Volle automatische Maschine, ein Mann reicht aus, um die Maschine zu bedienen. 16. Nehmen Sie den neuen Typ des Doppelbiegearms und die Vier-Stab-Klemmstruktur an (Patent erhalten): Querrichtung; Das mittlere Formbrett wird parallel bewegt. Der Abstand zwischen zwei Formbrettern wird durch das Kettenrad eingestellt. Somit ist die Klemmkraft sehr stark. 17.Powersparendes Design, das Ihren Gewinn steigern kann. 18. Getrenntes Luftkontrollsystem, das zur Vermeidung von Abfallverschmutzung ausgelegt ist. 19. Der Vorwärmer der PP-Blasmaschine sollte größer sein als die der PET-Blasmaschine.
Airtech Incorporated
Rutherford, Vereinigte Staaten von Amerika
Klären Sie Preis USD
Die Airtech Kinetic Blower (AKB) -Serie sind dynamische Gebläse, die über ein berührungsloses rotierendes Laufrad kinetische Energie auf das Medium übertragen. Das Gas wird von einem Hochleistungs-Titanturbo-Laufrad angesaugt. Die minimierten internen Verluste führen zu extrem hohen Wirkungsgraden und einer geräuscharmen Kompression bei Drehzahlen bis zu 12.500 U / min. Die Position des tangentialen Einlasses und Auslasses kann individuell entsprechend den Anforderungen der Anwendung ausgewählt werden. Die zuverlässigen IE4 / NEMA Super Premium-Gebläsemotoren sind auch mit integriertem Stecker und Frequenzumrichter erhältlich.
Ozonizers from the manufacturer
МОСКВА, Russland
USD 147.3/шт 147.3
     ANWENDUNG VON OZONATOREN LAGERUNG VON GEMÜSE UND FRÜCHTEN Verwendung von Ozon bei der Kühllagerung von Obst und Gemüse LANDWIRTSCHAFT UND LEBEN Luftdesinfektion in der Geflügelzucht Stimulierung des Wachstums und der Vitalaktivität von Pflanzen und Tieren Imkerei - der Kampf gegen Askopherose Die Verwendung von Ozonisatoren in Gewächshäusern Kampf gegen Pflanzenkrankheiten Getreidehandhabung Erhöhung der Haltbarkeit und Erhaltung der Qualität von Lebensmitteln, Getreide usw. LEBENSMITTELINDUSTRIE Desinfektion von Luft, Räumlichkeiten, Geräten und Produkten mit Ozon Die Verwendung von Ozon in der Fleisch- und Milchindustrie Desinfektion der Lebensmittelproduktion REINIGUNG VON TRINKWASSER UND ABFALL Schwimmbadwasserozonisierung Ozonanwendung zum Abfüllen von Wasser in Flaschen Eisenentfernung und Manganentfernung aus Wasser unter Verwendung einer Ozonierungsstation Aquakultur - Wasseraufbereitung in Aquarien und Fischzucht mit Ozon Abwasserbehandlung WÄSCHEREI, REINIGUNG, GERUCHSENTFERNUNG Hotels, Sanatorien, Landferienhäuser Reinigung und Autowaschanlagen Optimierung der Wäsche Beseitigung hartnäckiger Gerüche von Brennen, Tabak, Farbe und anderen Autowäsche Entfernung von Ölprodukten mit Ozon
Klären Sie Preis USD 0 0
Es wird in Versorgungs- und Abluftanlagen für Industrie- und öffentliche Gebäude eingesetzt. Entwickelt, um Luft oder andere nicht explosive, nicht aggressive Gasgemische mit Temperaturen von bis zu +40 ° C, frei von klebrigen Substanzen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m3 zu bewegen.
Klären Sie Preis USD 0 0
Supply of shut-off valves, gate valves, ball valves, gates, any construction and other equipment directly from the manufacturer Provision of advisory and other services for the implementation and development in the market of Uzbekistan and Central Asia
USD 867.82/шт 867.82
Fastening of the axle bridge (bridge-frame) to the emergency tank is carried out by means of two magnetic blocks М250, similar to used in the "Console" unit. The magnetic blocks are hingedly held together to the housing, inside of which the carriage moves along the guides with the sealing unit, which includes a press-screw and a rubber element.The set of delivery includes two types of sealing element: a cone and a gasket with diameters of 20 mm. Replacing one sealing element with another takes no more than 3 seconds.A cone is used to seal round gaps and holes, and a flat gasket is used for cracks or a group of small fistulas. Due to the movements of the carriage relative to the body and the sealing unit relative to the carriage, the sealing element is supplied directly to the leakage.The "aiming" zone is a 50x50 mm square surface. The surface to which the magnetic grippers will be attached is must be cleaned from dirt and coating.Product technical characteristics:Type - Bridge-frame (axle bridge) unitPressing force of the magnetic blocks to the metal surface - Not less than 2 * 250 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmThe maximum diameter of the sealed gap - At a pressure of 60 atm - not less than 7 mmInstallation time, min - 1-2Required number of workers - 1-2Dimensions, mm - 347x111x151Weight, kg - 5.4Service life - At the very least 10 years.
USD 274.05/шт 274.05
The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.
Kharkov pumping plant
Харьков, Ukraine
USD 4490.0 - 4510.0/шт
Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!
USD 6000.0/шт 6000.0
Anwendung: Die Öle in Transformatoren werden hauptsächlich zur Isolierung verwendet, außerdem unterdrücken sie Koronaentladungen und Lichtbögen und wirken auch als Kältemittel in Maschinen. Diese Öle müssen absolut sauber und trocken sein, um optimale Isoliereigenschaften und Durchschlagsfestigkeit zu erreichen und zu erhalten. Hier entsteht die Notwendigkeit einer Transformatorölreinigung. Der ASSEN ZYD Transformer Oil Purifier ist der Schlüssel zur Zuverlässigkeit, Leistung und Haltbarkeit des Transformators. Das Isolieröl des Transformators muss frei von Feuchtigkeit, gelösten Gasen und Partikeln sein, die sich mit der Ölalterung ansammeln. Sogar einige neue Öle müssen möglicherweise verarbeitet werden, um ihren Gehalt auf ein akzeptables Niveau zu begrenzen. Merkmale: 1. Erwartungen an eine effiziente Isolierölaufbereitungsanlage. 2. Geeignet für Ölbehandlung, Ölvakuuminjektion und Heißölkreislauf bei der Installation und Wartung von großen Leistungstransformatoren. 3. Einfacher und störungsfreier Betrieb. 4. Online-Messung und Aufzeichnung von Prozessparametern. Nach der Behandlung Feuchtigkeit PPM 3 Gasgehalt % 0,01 Verunreinigungsgröße µm ≤ 1 (kein freier Kohlenstoff) Durchschlagsspannung kV ≥ 75 IFT dyn / cm ≥ 40 Säurezahl mgKOH / g ≤ 0,03 Dielektrischer Verlustfaktor tan δ (90 ° C) ≤ 0,001 ASSEN garantiert ein gemäß dieser Spezifikation geliefertes Gerät auf Material- und Verarbeitungsfehler bei normalem Gebrauch und Service für einen Zeitraum von sechsundzwanzig (26) Monaten ab Versanddatum oder vierundzwanzig (24) Monaten nach Inbetriebnahme. Systeme. ... Die Verpflichtungen von ASSEN im Rahmen dieser Garantie beschränken sich auf die Reparatur oder Lieferung eines ähnlichen Teils als Ersatz für alle Teile, die sich während der Garantiezeit als defekt erwiesen haben. 1. Wir passen die Maschine nach Ihren Wünschen an. 2. Wir haben über 20 Jahre Exporterfahrung. 3. Wir bieten unseren Kunden qualitativ hochwertige Produkte zu einem wettbewerbsfähigen Preis. 4. Wir bieten unseren Kunden einen hervorragenden After-Sales-Service. 5. Wir sind erst zufrieden, wenn unsere Kunden zufrieden sind.
USD 1.0/шт 1.0
WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.
USD 200.0/шт 200.0
Founded in 1954 Torin produces quality automotive products for service professionals.
USD 100.0/шт 100.0
Founded in 1954 Torin produces quality automotive products for service professionals.
USD 200.0/шт 200.0
Founded in 1954 Torin produces quality automotive products for service professionals.
USD 200.0/шт 200.0
Founded in 1954 Torin produces quality automotive products for service professionals.
USD 100.0/шт 100.0
Founded in 1954 Torin produces quality automotive products for service professionals.
USD 3000.0/шт 3000.0
Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.
USD 3000.0/шт 3000.0
HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.
USD 3000.0/шт 3000.0
Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.
USD 3000.0/шт 3000.0
Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.
USD 3000.0/шт 3000.0
SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.
USD 300.0/шт 300.0
Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.
USD 3000.0/шт 3000.0
Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.
USD 3000.0/шт 3000.0
Characteristic: Providing substantial and stronger water current to improve pond water circulation and oxygenation. With more impellers than normal model, which can benefit a large breeding area, thus, less power consumption and less investment cost. Few aerator is needed, reduce maintenance and labor costs. With diesel engine drive, especially suitable for area without electricity support and for emergency use. "100% New Raw Materials" are guaranteed to be used in our products.
USD 3000.0/шт 3000.0
Characteristic: Best Quality Silicon Steel Plate. Energy Saving. High Oxygenation Performance From Unique Design. Sturdy Stainless Steel Frame Ensure Without Any Deformation. Easy Maintenance. The Unique Aerator Motor Made Under "ISO9001"And "ISO14001" System. "100% New Raw Materials"are guaranteed to be used in our products.   Note: Since May 2017 Our New 1 HP / 2 HP three-phase high efficiency electricity saving motors Will Be Launched.  Feel free to contact us if you are interested in our new product.
USD 3000.0/шт 3000.0
Mainly Designed For Lake & Sea. Be Able To Be Used For Harvest. Resist Maximum to 6M Wave. Still Very Strong And Working Well During Typhoon. Having Good Feedback From The Biggest Tilapia Farm In The World And Other Governmental Projects.   Function: Marine cage farming system can be used in various water environments including lake, sea and river, etc. Suitable for intensive farming. Suitable for different species, such as Tilapia, Japanese Sea Bream, Goldlined Sea Bream, Cobia, Greater Amberjack, Blue-Banded Sea Perch, Spangled Emperor (Sand Snapper, Parrot-Fish), Snappers, Yellow-Wax Pampano, Orange-Spotted Grouper, Red Drum, Catfish, Striped bass, Bluegill sunfish, Crappie, Carp, etc.   Characteristic: "One-Piece Injection Molded" HDPE 80 Bracket, extremely sturdy. HDPE 80 Floating Pipe and HDPE 100 Handrail Pipe offer excellent ESCR (Environmental Stress Cracking Resistance) and resist deformation. High carbon component, strong UV resistance ensures sound durability, low maintenance and investment cost. Removable Handrail T Bar makes more easily assembling, simplified harvesting & efficient maintenance as well as resistant to corrosion. Heavy duty standing pole. Bear heavier net weight. All the "Round" and "Square" shape cages can be tailor-made.
USD 30000.0/шт 30000.0
1.        Core Box Size (LxHxW) mm: 600x400x300 2.        Max. Core Size (LxHxW) mm: 520x380x300 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 1 15-30 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2900 kgs 11.    Dimension(m): 2.5x3.7x3.3
USD 30000.0/шт 30000.0
1.        Core Box Size (LxHxW) mm: 500x400x250 2.        Max. Core Size (LxHxW) mm: 420x380x200 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 15-25 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2700 kgs 11.    Dimension(m): 2.1x3.5x3.1
USD 30000.0/шт 30000.0
1. Power: 5-7.5 HP 2. Core loading size (m / m): 400 X 330 3. NOT. blades: 3 4. Weight (kg): 350 kg 5. DShV (m / m): 110 X 800 X 140 6. Productivity (kg / h): 500 kg / h
USD 30000.0/шт 30000.0
1. Maximum. Core size (L x H x W): 480x260x250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm
USD 30000.0/шт 30000.0
1. Maximum. Core size (L x H x W): 480 x 260 x 250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm
USD 30000.0/шт 30000.0
1. Model: KM-1 2. Maximum. core box size: 160 x 220 mm 3. Maximum. t. core: 350 cubic meters. 4. Debit: 100-150 pcs / hour 5. Required air pressure: 3-5 kgf / cm2 Kao Kuen Industrial Co., a professional manufacturer of rod firing and molding machines, has accumulated solid knowledge and experience in creating the most efficient, economical and durable machines for over 30 years.
USD 30000.0/шт 30000.0
1. Size of the main box (L x H x W): 500 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 420 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Heating type: LPG or electric 6. Maximum. Blow: 15-25 kg 7. Sand storage capacity: 200 - 300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 3200 kg 11. Size: 3100 x 2500 x 3650 mm
USD 3000.0/шт 3000.0
1. Core box size (L x H x W): 500 x 300 x 250 mm 2. Maximum. Core size (L x H x W): 420 x 280 x 200 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of heating: LPG or Electrica 6. Maximum. Blowing: 15-25 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2400 kg 11. Dimensions: 2010 x 3340 x 2850 mm
USD 30000.0/шт 30000.0
1. Core box size (L x H x W): 550 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 470 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of message: LPG or electric 6. Maximum. Blowing: 15-30 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2500 kg 11. Dimensions: 2010 x 3340 x 2850 mm
USD 30000.0/шт 30000.0
1. Box size (LxHxW) mm: 550x400x300 2. Max. Core size (LxHxW) mm: 470x380x250 3. Operating mode: manual / single cycle / automatic cycle 4. < / span> Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Page type: LPG or electric 6. Max. Blow: 15-30 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2800 kg 11. Dimensions (m): 2.3x3.6x3.2

Qoovee - eine Plattform für den Großhandel. Hier finden Sie Großhandels Waren in jeder Branche und einschließlich Waren Andere ausrüstungen und maschinen. Qoovee hat eine große Auswahl an Waren, die Sie benötigen. In diesem Bereich finden Sie Großhandelswaren für Andere ausrüstungen und maschinen von Lieferanten aus China, Kirgisistan, Kasachstan, Russland, der Ukraine, der Türkei, Europa, Afrika, Lateinamerika und anderen Ländern. Die aktuelle Lieferanten Datenbank wird ständig aktualisiert: Qoovee hat jetzt über 20.000 Lieferanten aus 80 Ländern und 600 Branchen. Die Großhandels Kategorien von Waren werden ständig aktualisiert und bleiben relevant. Alle Lieferanten von Waren für Andere ausrüstungen und maschinen sind an Großeinkäufen und Partnerschaften interessiert!

Schreiben Sie uns, wir sind online!