ООО «Энерготех», г.Барнаул

• Productivity of RBU: 60 cubic meters. meters per hour • Production of two grades of concrete at the same time • Twin-shaft concrete mixer V = 750 liters - 2 pieces • Fully automatic control of RBU • Production of ready-mixed concrete and reinforced concrete products (vibropress) simultaneously • The equipment is certified, the certificate of conformity GOST 27338-93 and GOST 16349-85 • Full 1 year warranty

As a rule, for many enterprises using gaseous oxygen in technological processes, its purity is of great importance. To resolve this issue, the employees of ZEPRIKON CJSC offer enterprises to use their oxygen stations with an oxygen output of 99 (± 1)%. This purity is achieved through the use of state-of-the-art oxygen production methods using pressure swing adsorption.

Для заправки большого количества баллонов и снабжения потребителей кислородом в больших объёмах спроектирована модульная кислородная станция для заправки 100 баллонов. Данная станция представлена в трёх исполнениях и может работать в следующих режимах:1. заправка 100 кислородных баллонов в течение 8 часов; 2. заправка 100 кислородных баллонов за 18 часов; 3. заправка 100 кислородных баллонов за 24 часа. Исходя из потребности заказчиков и их режимов работы, каждый клиент может получить свою кислородную станцию. При этом чистота кислорода может регулироваться в диапазоне от 93 до 98%.

For remote oxygen consumers, as well as for organizations that want to organize independent production of gaseous oxygen with its injection into cylinders, it offers a solution in the form of modular oxygen stations for filling cylinders. This equipment is specially equipped with a booster compressor and a ramp for filling cylinders. As a result, at the exit you get cylinders filled with gaseous oxygen, ready for operation.

This equipment is based on the technology of short-cycle adsorption to separate air and obtain gaseous nitrogen at the outlet. This technology allows us to receive nitrogen at the outlet of our stations with a purity of up to 99.9995%. Our adsorption nitrogen stations produce nitrogen with a capacity of 20 to 8000 m3 / min and an outlet pressure of 3 to 150 bar. The stations can be made in a stationary (on a frame), modular design, on a chassis, on a sled.

For supplying remote objects, as well as large industrial enterprises with compressed air, ZEPRIKON CJSC offers the optimal solution - modular air compressor stations. This type of equipment allows you to organize an autonomous supply of compressed air to the consumer, regardless of its location. A distinctive feature of modular air compressor stations is that all technological equipment is mounted in a container, in which they function as a single system. The power source for the operation of the station is the electrical network, as well as a specially installed diesel generator. Modular air compressor stations create a maximum compressed air capacity of up to 120 m3 / min and a maximum working pressure of up to 4.0 MPa.

Mobile nitrogen station ZEPRIKON CJSC is an autonomous operating unit for the production of gaseous nitrogen. This station is based on a diesel compressor or diesel generator, which allows the station to operate without being connected to the mains. All equipment is mounted on a car chassis or installed in a metal container. Mobile nitrogen stations of ZEPRIKON CJSC allow to obtain nitrogen up to 3000 m3 / h and purity up to 99.99%. The control system of this station allows you to control all processes and equipment from one control panel and immediately set the required operating modes and characteristics of the final product.

CJSC "ZEPRIKON" designs and manufactures block-type water compressor stations of medium and high performance according to the customer's specifications. A distinctive feature of this type of station is the placement of all technological equipment in a special building - block box. The advantage of the equipment is the absence of the need to build a building for compressor equipment, the autonomy of the compressor station, high productivity, low maintenance and operation costs.

Contact Fast Freezer "KSA - 3500-12 / 1100" is designed for contact freezing of injected parts of poultry. A thin HDPE (High Density Polyethylene) film is used as a supporting element, sliding over a cooled aluminum plate in which the refrigerant circulates. This type of film is approved for contact with food. The offered equipment is fully equipped and ready to work, it is enough to connect it to the power supply and refrigerant. A complete refrigeration unit can be offered as an option. The equipment is made on a stainless steel frame with adjustable feet for precise height adjustment. All structural elements (with the exception of contact plates, which are made of aluminum), conveyor rollers, housing, etc. made of stainless steel AISI-304, and the drive rollers and shafts are coated with a polymeric coating approved for contact with food. As a drive of the film, a motor with a variable, constantly controlled rotation transmission speed is used. The spent film is wound onto a reel using a transfer coupled to the main drive. A control panel made of stainless steel is installed on the supporting frame of the equipment. The panel contains the following elements: drive motor control unit, start / stop buttons, main switch, emergency stop button and freezer plate temperature sensor.

The sorting system includes: an automated conveyor system controlled by a controller; barcode scanning system; actuators that move the product to the appropriate cells designed to work with a specific type of product. The system is designed based on the number of product types, space-planning solutions of the production site and possible additional requirements for the technological process.

Кулер для охлаждения хлеба, кондитерских изделий Lipsia представляет собой спиральный кулер с центральным барабаном, позволяющий полностью автоматизировать процесс охлаждения хлеба. Преимущества: • Высокая производительность; • Сравнительно небольшой размер; • Возможность непрерывной эксплуатации в течение продолжительного промежутка времени. Кулер для охлаждения хлеба имеет центральный или боковой привод. Как правило, продукция поступает на верхний ярус. Для контроля высоты продукта на входе устанавливают шибер с концевым датчиком.

Оборудование для лимонадов в розлив "Ретро" продается в комплектациях с тремя / шестью колбами в виде конуса из стеклопластика или ударопрочного стекла. В комплект входит сатуратор, собранная колонна для розлива напитков, комплектующие для газового болона и стойки.