2015 Yamaha F75 75 hp 4-Stroke 20" Outboard Boat Motor Engine PTT Nice Shape - 79476

3D printer Chocolate Fiesta One makes products from chocolate glaze and chocolate. With help of Chocolate Fiesta One you can easily turn your idea into a unique chocolate figure. We provide customers with technical support and detailed instructions. Print speed: up to 100 mm / s Nozzles: 0.6, 0.8, 1mm Working print area: 200 x 200 x 150 mm Computer connection: USB / WiFi Print type: 2D, 2.5D, 3D Print type (number of colors): single color 3D printers are developed and assembled in St. Petersburg, Russia. All devices are certified on the territory of EEUManufacturer's warranty - 1 year.

3D printer Chocolate Fiesta Double makes products from chocolate glaze and chocolate. The Double version has an additional extruder - it allows you to print two colors of chocolate at the same time! Print speed: up to 50 mm / s Nozzles: 0.6, 0.8, 1mm Working print area: 180 x 200 x 100 mm Computer connection: USB / WiFi Print type: 2D, 2.5D, 3D Print type (number of colors): one-color, two-color 3D printers are developed and assembled in St. Petersburg, Russia. All devices are certified on the territory of the EEU. Manufacturer's warranty - 1 year.

DISINFECTANT CABINET 2.4 INCH TOUCH SCREEN USED FOR NUMBER OF PEOPLE AND SETTINGS SPRAY SETTING BETWEEN 1SN TO 10 SEC

Inertial screens of light type are designed for mechanical sorting of bulk or lumpy materials by size. They are ideally suited for handling coal, gravel and crushed stone in the nonmetallic industry with a size separation of 2 to 100 mm.

High-frequency screens are designed for dry or wet screening of bulk materials with a bulk mass of not more than 2.8 t / m³, deslimetting, dehydration, and also washing suspension from beneficiation products. Can be used for sand, ores and a wide variety of other materials.

Self-balancing inertial screens are designed for screening bulk materials with a bulk density of 1.4 t / m ³ . They are used in the operations of dewatering, desliming wet and dry, screening of coal, anthracite and oil shale, as well as for separating suspension from beneficiation products.

We are engaged in both the development of new production facilities and engineering - the integration of various equipment into existing lines and factories involved in: processing of nonmetallic materials; processing of metallurgical slag and disposal of metal-containing waste, disposal of industrial waste; processing and disposal of construction waste; production of building materials. Our company has accumulated significant experience in the field of laboratory research of various mineral raw materials: ores, non-metallic materials, coals. Using our own design team together with technologists, we are ready to perform tasks of varying technical complexity.

Production of modern modular semi-mobile washing lines for separation (enrichment) of sand by size classes: 0.05; 0.071; 0.1; 0.16; 0.2; 0.63; 1.0; 2.0 and 5.0 mm. These models of SGU sieve hydrocyclone plants are designed for different capacities: 20 t / h, 40 t / h, 60 t / h and 120 t / h. Each of these installations can be adjusted for individual customer requirements (coal sludge, sand, limestone and granite screening, metallurgical waste, thermal power plant sludge, etc.).A typical model of SSU consists of:- a sump of the circulating pulp, which receives the starting material and water, but often the prepared suspension is supplied;- a classification unit, which consists of a slurry pump that creates the necessary pressure to feed the slurry, a hydrocyclone of the required diameter (which affects productivity) and shape (which affects the separation size), separating the watered target product "sands" and the suspension "drain" containing dusty and clay particles (usually waste of enrichment), as well as pipelines and shut-off equipment;- dehydrating high-frequency screen GVCh with special sieves (polyurethane, rubber urethane or stainless steel sieves), which brings the final product to the required moisture class.This set of equipment is enclosed in a common semi-mobile frame and is equipped with ladders and walkways for quality control and maintenance.The sieve hydrocyclone unit operates on a partially closed cyclic principle. Its basis is a reservoir, which receives the initial mixture of sand, clay inclusions and water, in which the slurry level is kept within a certain range. In fact, the reservoir is needed to provide a certain concentration of the mixture that the centrifugal pump is able to lift into the hydrocyclone. In a hydrocyclone (or in double hydrocyclones), due to centrifugal forces, almost 100% of particles larger than 100 microns and 50-80% of particles larger than 40-80 microns are classified, which in the form of a highly concentrated mixture are discharged from the cyclone onto a dehydration (dehydration) screen located under the hydrocyclone. Smaller particles (which should contain all clay particles and other inclusions) are carried away with the main volume of water from the hydrocyclone into a system that divides the flow (automatic regulation by a valve) into a return to the tank and a drain, which is sent to the water purification system. The dewatering screen is equipped with polyurethane or rubber modular screens with openings (usually 0.3-1.5 mm), through which water efficiently drains into the tank, and sand particles slide to the discharge chute and are discharged onto the product conveyor. The content of dust particles in the sand will decrease to 0.02-0.9%.We strongly recommend that before choosing sorting or classifying equipment that is planned to solve your problem, it is imperative to carry out the necessary research of raw materials in our laboratory.

roasted chicken, chicken, grill

ROOT CHICKEN, GRILL, BBQ

Dynamic forms Service Equipment, which has interpreted industrial painting systems from a different perspective since its establishment, is your leading solution partner in Turkey with its painting booths. Dynamic forms Service Equipment, which has been offering up-to-date and usable products for 20 years without losing its R&D identity, positions its products not only as a product but also as a solution that will meet the needs of the environment in which it will be located. Offices : Germany , France , Africa , Turkey , Bulgaria

Industrial PCB Electronic Board Design, Mass Production, Embedded Software, PLC Software, Control Panel Production, Industrial Machine Automation, Data Logger, Electronic Circuit Design, Electronic Board Design, Circuit Design with ESP32, Arduino Software, Arduino Circuit Design, Arduino Software Development etc. . Machine Automation, Industrial Automation, PLC Programming, Data Logger, IoT Systems, Control Systems, Control Panel, Automation Panel Production, Interface Software.