Additel ADT761 - 86299

High Precision Solid Density Meter Gold Purity Tester Density Meter 0.001-120g Parameter:Model:XF-120KWeighing range:0.001-120gDensity accuracy:0.0001g/cm3Testing time: about 5sTest type: Gold, Platinum, KT gold, Silver, Palladium etc.

Digital Density Meter Precious Metal Gold Automatic Soild Density Detector Name: Digital Density Meter Voltage: 100-240V Model: XFCNMD-3005S Weighing range: 0.005-300g Density readability: 0.001 g/cm3 Language system: support English Measuring time: 5 seconds Display screen: 5 inch industrial touch screen Measurement type: any irregular solids, particles, floating bodies Result display: density, volume, volume percentage, density average, density minimum, density maximum Measurement principle: Archimedes principle buoyancy method Density range: density > 1, < 1 can be tested Density measurement platform: ABS integrated injection molding, free to choose the flip mode (magic measurement frame, can be freely removed) Parameter setting: water temperature setting, measuring solution density compensation setting, standard material density setting, standard volume setting Data statistics: automatic 100 groups of density value saving function, and according to the number of saved groups automatically display the average value, maximum value, minimum value Calibration mode: single-point automatic calibration, multi-point automatic calibration Data interface: RS-232 standard interface Water sink: PC material integrated injection molding transparent sink Water sinksize: 15.3×10.7×8.0cm (L×W×H)   Outer package size: 42.5×17.5×32.5cm (L×W×H)  

Gold Purity Content Detector Gold K Value Tester Gold And Silver Density Meter SpecificationModel：CC-1200KWeigh accuracy：0.005g~ 1200gMax weight：1200gProportion of precision：0.001 g/cm3Set function：Solution compensation temperature compensationTest time:about 10sTest function:Gold purity,K number or platinum platinum Pt two mixed metal mixing ratioOptional:Printer melting furnace. wind and dust cover,Pack size:45*24*46mmWeight:7.5kgPower：110V - 220V（V\HZ）

ME2400 Vortex Flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe. The number of swirls are proportional to the volumetric flow in the pipe. Vortex flowmeter widely used for gases, steam and liquid applications. It is ideal for measuring saturated and superheated steam in large facilities to improve steam production efficiency.

Description:    F-CRAM  motor Phase:         Single Voltage:       100V 110V 115V 120V 220V 230V Frequency:      50/60HZ Out Power:      10w Type of bearing:      Ball bearing Protection:      Thermal cutoffs or Automatic reset thermal protector Rotation:       CW. or CCW. Speed:         3400rpm   We are a blower motor manufacturer, our products including variable speed blower motor, axial flow machine motor, axial fan shaded pole motor, blower shaded pole motor, small blower shaded pole motor, drying fan shaded pole motor, etc. The goal is to achieve the corporation at ODM and OEM basis & to provide the components required for the manufacturing. The strategy of the company is to provide customer the products with good quality & reliable service.

Advantages ◈YB2 series motor is a high-efficiency whole three-phase asynchronous motor, suitable for fueling equipment.◈The power grade and installation size conform to IEC standards.◈It improves the explosion-proof and safety performance, promoting the reliability of motor effectively.◈This motor also reduces the nosie and vibration in operation.◈It enhances the economical efficiency and energy-saving effect of motor oeprating, and operational reliability of explosion-proof motor.◈The wide application of YB2 series motor not only has significant role in safety production among petroleum industry, but also shows obvious social economical benefit. Installation & Dimension YBJY80M2-4 installation dimension table (mm) A A/2 B C D E F G H K AB L HD AD 125 62.5 100 50 1916 40 65 15.513 80 10 165 310 165 105 Using Condition ◈Rated power: 0.12-3kw◈Rated voltage: 380V;◈Rated frequency: 50Hz;◈Insulation grade: F grade, the temperature rise is assessed by 80K;◈The ambient air temperature range is: -15℃~40℃;◈Altitude: no more than 1000m;◈Rated working system: S1 works continuously.

Buy dry cast resin transformers at an affordable price. These three-phase devices are designed to power converter equipment for various purposes. Basically, such transformers are used for: - excitation systems of hydro and turbo generators; — providing power to the electric drive of the drilling rig, as well as semiconductor converters of traction substations of urban electric transport (trams, trolleybuses, metro); — operation in rectifier units, in power electrical installations included in the traction power supply system of railways; — power supply of electric drives with direct and alternating current. Advantages: environmental safety, natural air cooling, resistance to low temperatures and precipitation, fire safety. Characteristics: - type of insulating winding: TLSP, TLSZP, TRLSP AND TRLSZP; — power: up to 3200 kVA; — voltage class: up to 10 kV; — execution and quality comply with GOST requirements; — country of origin: Russia. All products are tested in our own automated testing laboratory, which allows us to perform standard, acceptance and certification tests of products. The equipment is guaranteed for 3 years from the date of commissioning. 3-year warranty from the date of commissioning We deliver our equipment to any region and the CIS. To clarify prices for dry-type transformers and order power equipment with the required parameters, call our manager. All equipment is shipped with a full set of documents: - Passport - Test report - Operation manual - Sales and purchase agreement - We will produce shipping documents in a short time. We control the quality of production at all stages.

IRIS is the world's first patented energy management equipment based on carbon nanotube technology that does not use Voltage Regulation to save energy. IRIS offers a new chemically based system that makes your current electrical system more efficient. Unlike other energy saving devices that drop voltage, IRIS does not consume any voltage or current so it will not cause any harmful effect on the installed system. IRIS uses parallel installation and is usually installed after the Circuit Breaker and dispersed installation for each circuit is also possible. Installation usually takes about 30 minutes per unit. Available model is from NF-10 (for 10 kVA) to NF-1000 (for 1,000 kVA). Over 1,000 kVA, more than two units of IRIS can be installed in parallel connection. In short, there is no other energy saving product that compares to IRIS on the market.

The flow meter RSJ-50 is installed in the hydraulic compartment of the fuel dispenser. And it is designed to measure the volume of fuel passing through the hydraulic system of the fuel dispenser. In general, for this piston flowmeter, its accuracy is ±0.2%. Compared with similar products, this accuracy is higher and its lifespan is long-lasting. The flowmeter is an important guarantee for the metering function of the tanker. It can still work normally in an ultra-low temperature environment of minus 40 degrees. Material & Structure of Flow Meter RSJ-50 ◈Body material: aluminum alloy housing, stainless steel sleeves, composite piston seal, stainless steel rocker mechanism◈Structure: stainless steel cylinder liner, four-piston strokes◈Advantage: novel appearance, small body, high strength, good wear resistance, accurate measurement, long service life. Working principle The principle of operation of flow meter RSJ-50 is based on the passage of fuel through a metering device. Inside the flowmeter housing, it has four cylinders with pistons operating due to the kinetic energy of the liquid passing through them. The pressure of the liquid is created by an external oil transfer pump – ZYB-50. The pistons are placed in pairs on two connecting rods in four mutually perpendicular measuring cylinders with a volume of 0.125 liters each. Fuel alternately enters each of the four cylinders, then is fed to the output of the volume meter. Pistons with connecting rods under the pressure of fuel perform reciprocating motion in the cylinders. Connecting rods rotate a vertically positioned crankshaft, the free end of which protrudes outside the housing and is connected to the pulse generator by means of a coupling. It can complete with a rectangular O-ring IO50-09. Besides, O-rings are oil & gas-resistant with an operating temperature range from -40°C to +55°C. Technical Parameters of Flow Meter RSJ-50 Model RSJ-50 Flow rate 5L-60L/min Discharge rate per revolution 0.5L Adjustable Minimum Volume 0.05% Accuracy ±0.2% Repeatability ≤0.07% Dimension 50*29*24cm Net weight 10kg Gross weight 10.5kg Package 2PCS/CTN

The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter ◈Compact structure◈Easy maintenance◈Easy to read and operate mechanical display◈Flexible installation◈Low pressure drop Technical Parameters Model OGM-25 OGM-40 Size 25mm/1” 40mm/1(1/2)” Flow Rate Range 20~120L/min 40~400L/min Accuracy ±0.5% Repeatability ≤0.17% Max. Pressure 16Bar 6Bar Dimension 30*26*36cm 36*33*30cm Net weight 7.5kg 19.5kg Gross Weight 8kg 20.5kg Package 1pc/carton 1pc/wooden case

MSeries flow meter is a kind of positive displacement flowmeter, belong to the class with the highest accuracy in the . in the production of petroleum industry and , from oil extraction, transportation, smelting and processing to trade sales, flow measurement runs through the whole process. No link is inseparable from flow measurement, otherwise the normal production and trade exchanges in the petroleum industry will not be guaranteed. Features of M series Flow Meter Excellent stepless trimming device (wear compensation device) for positive and negative calibration of the flowmeter. High accuracy and repeatability over a large range; ultra-high accuracy at constant flow. Low maintenance, low wear, long life Low pressure loss, true gravimeter Measurement accuracy is not affected by changes in temperature, pressure and viscosity Available in aluminium, cast iron, cast steel and stainless steel Applications of M series Flow Meter this kind of flow meter can be applied into various fields, such as refined petroleum products, unleaded gasoline, leaded gasoline, diesel oil, kerosene, fuel oil, propylene; motor oil, liquefied petroleum gas, crude oil, etc.

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 30000     Maximum current, A 40     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 34х26,5х113,5     Weight, kg. 102