BUY CALUANIE MUELEAR OXIDIZE ONLINE - 80116

Product Description: The specification of mold additive cured silicone rubber, which also uses additive treatment silicone rubber and platinum curing silicone rubber, is usually a two-component liquid silicone rubber, stress vulcanized (RTV-2). Applications: Additive cured silicone rubber has a wide application, such as food mold making (candy, cake, biscuit, chocolate, ice cubes, fondant, etc. foaming, making breast prostheses, artificial leather, human body, Model Code GTSIL-P10 GTSIL-P15 GTSIL-P20 GTSIL-P25 GTSIL-P30 GTSIL-P35 GTSIL-P40 Shore A 8-10 14-16 19-21 24-26 28-30 34-36 38-42 Viscosity - SP 3000-5000 4000-6000 4000-7000 5000-8000 6000-9000 6000-10000 4000-6000 1:1 1:1 1:1 1:1 1:1 1:1 - MPa 3.5-5, 5 4-6 4-6 4-6 4-6 4-6 3.5-5.5 Shrinkage - % 0.10% 0.10% 0.10% 0.10% 0.10% 0.10% 0.10%. Elongation - % 500-600% 500-600% 500-600% 400-500% 400-500% 350-500% 300-450%. free of loose material If necessary, especially on porous substrates, use a suitable release agent such as petroleum jelly or soap solution. nent A (silicone base) before use, since the filler can quickly exfoliate during long-term storage. Weigh 100 g of Component A (silicone base) and 3 g of Component B (hardener) in a clean container. Stir until the hardener is completely dissolved in the base. You can use manual or mechanical change, but do not change for an extended period of time and do not allow the temperature to rise above 35°C (95°F). With frequent falling under a small amount, which are exceptional characteristics of component A (silicone base) and component B (hardener). It is highly recommended to remove the air entrapment in the vacuum tank, the intake of the mixture is fully expanded and then collapsed. After another 1-2 minutes in a vacuum, you can check the mixture if there are no air bubbles in it. Vacuum deaeration of the mixture results in an increase in volume by 3-5 times, so a sufficiently large container should be chosen. Note. In the absence of vacuum deaeration equipment, air entrainment can be minimized by mixing a small amount of component A (silicone base) and component B (hardener), and using a brush to accurately determine 1-2 mm of layer on the original. Leave the temperature until the bubbles disappear on the surface and the layer slows down. With the addition of additional bases and hardener and the possibility of implementation for the final form. 3. Filling the mixture and curing. Pour the mixture of Par A (silicone base) and Part B (hardener) as soon as possible onto the original, avoiding air trapping. The catalyzed material cures to a flexible rubber within 24 hours at ambient temperature (22-24°C/71.6-75.2°F), after which the mold can be separated from the original. If the operating temperature is much lower, the curing time will be longer. If the room temperature or humidity is very high, the run time of the catalyzed mixture will be shortened. The final mechanical properties of the mold are achieved within 7 days.

PC Bottle Scrap (Water Bottle) PC Bottle Scrap (Water Bottle)DetailsPlace of Origin:United Kingdom.Model Number:PC bottle scrap..packing:Compressed Balesname:Polycarbonate Pc Granules.Material:Polycarbonate.Characteristic:100% CleanTransparency:100%

HDPE Milk Bottle Scrap/HDPE Milk Bottle Flakes/HDPE Milk Bottle Regrind HDPE Milk Bottle Scrap/HDPE Milk Bottle Flakes/HDPE Milk Bottle RegrindWe are exporters of large quantity of HDPE Milk Bottles Scrap with good quality that meet every standardHDPE Milk Bottle Scrap..Quality : HDPEClear natural color..Clean and stored inside .Dry material.Packed in bale.Form filmColor clearPacking in baleOrigin post-commercialQuantity per load 27-28MT in 40ft containerWe also have the following products:- HDPE Clear/Natural Regrind (clean and washed)- HDPE Clear/Natural Scrap Baled- HDPE White Regrind/Baled (clean and washed)- HDPE Milk Bottle Regrind.- LDPE Film Baled 100, 99/1 and 98/2- LDPE Clear/Natural Regrind- LDPE White RegrindHDPE milk bottle scrapHdpe flakeHDPE Drum in baledHDPE RegrindLDPE Clear film scrapPet bottle scrapPet flakes hot washedGreen pet strip scrapPC water bottle scrapPC Water bottle regrindPC CD / DVD METALIZED AND CLEAR SCRAPBopp film roll scrappp jumbo back scrapPP super sack scrapPP big rope scrapPP bucket scrapPMMA Acrylic sheet scrapLLDPE film scrapEVA film roll scrapEPS Block scrap

Salmon Onyx

Satin Onyx

Silver Onyx

Yellow color. Load capacity < 100 kg. Blocking: Without brake. Purpose: Furniture, trolley. Wheel material PU. Wheel movement: Rigid. Wheel size (inch) 2X0.5.

Black masterbatches. Contains soot for black coloration. The soot content can reach up to 46%. The higher the soot content in the masterbatch, the less should be added. White dye concentrates. They contain a white pigment - titanium dioxide, which provides the best staining in white. The best recommended titanium dioxide from the world's leading manufacturers: DuPont, Hansmann Kronos, Cristal. Color masterbatches. These masterbatches contain a dispersed mixture of color pigments in a polymer. Are applied to all types of color coloring of films and plastic products. Masterbatches of additives contain in their composition a variety of additives that give the polymer the necessary additional properties (UV stabilizers, sliding additives, etc.)

ERMAMAT-QUARTZ LLC, operating under a license of the NV series number 0256 F5 dated 07/08/2020 for the extraction of crushed quartz. Crushed quartz sand is a raw material that is obtained by grinding natural quartz extracted from mountain deposits. Differs in purity and uniformity of structure, and also an uneven chipped form. After crushing, the material acquires such properties as high strength and abrasiveness. The composition of the raw material contains the maximum amount of silicon dioxide, as well as the minimum percentage presence of clay impurities. A large amount of silica and a minimum amount of impurities - all this determines the optimum resistance of the material to acids, as well as good refractory properties. Depending on the method of crushing and the subsequent purpose of the material, the grain size of crushed quartz can vary from 0.05 to 4 cm. APPLICATIONS OF QUARTZ SAND The use of quartz sand is practically unlimited. It is resistant to chemical, mechanical and atmospheric influences, and also has good fluidity. This material is used at: - production of dressing for roofing material; - decorative plaster; - production of refractory products; - steel production; - sprinkling of sports grounds and personal plots; - making molds for the foundry industry; - removal of metal corrosion; - production of enamels, varnishes and paints; - formation of a covering of floors of working rooms; - filtration of drinking water and industrial wastewater; - production of fine-grained concrete and polymer concrete; - manufacture of glass and fiberglass. LLC "ERMAMAT-QUARTZ" offers you its products according to the following characteristics: Crushed vein quartz of milky white color, Sio2 content of more than 99.5% corresponds to GOST 22551-77 grade VS - 050-2. Ready to use, cleaned, dried and packed in a 25kg bag. and 1000 tons.

Characters: Yellow viscous liquid, insoluble in cold water and ethanol, soluble in hot grease, non-ionic water-oil emulsifier (W / O). Applications: No bad odor, has good thermal stability. ⑴ Used in chocolate, add a small amount, can significantly improve the mobility of chocolate products, and save the amount of cocoa butter. ⑵ Expedit the process of filling and mold forming for chocolate products, optimize the process and make the small bubbles to discharge easily, and then avoid occuring empty holes and pore in the chocolate products. ⑶ Used with lecithin , has a good synergistic effect, thinning the thickness of chocolate coating to make it easy to process. ⑷ In humid conditions, can reduce the viscosity. And form chocolate sugar coat quickly. And accelerate its conglutination. And increase adhesion, reducing the small pores. Opeartion method and dosage The suggestion of maximum in cocoa products, chocolate and its products, candy, chocolate coated products, ice cream coating: 5.0g/kg, oily-water fat emulsified products: 10g/Kg. Technical Index Poly glycerol(Dimer, trimer and tetramer glycerol)(w/%) ≥75 Poly glycerol(More than Heptamer)(w/%) ≤10 Pb / (mg/kg) ≤ 2 Packaging Plastic bucket or Iron bucket inner coating plastics, net weight is 25 kg, 180 kg. Storage and transportation: Sealed and stored in the cool, dry and well-ventilated place, avoid to put inversion, Forbid to store and transport with materials that is explosive, combustible or deleterious. The shelf life is 12 months.

Characters: White powder or flake solid, insoluble in water, soluble in organic solvents such as ethanol, is a non-ionic emulsifier. Applications: Has excellent foam performance, good oil-soluble emulsifier. ⑴Used in pastry margarine, prevent the bread and confect aging, improve its processing performance. ⑵ Uesd in ice cream, increase dilatability and shape preserving. ⑶ Used in margarine to improve whipping, and to prevent the oil-water separate. ⑷ Used for cakes, fried snack foods, complex sauce. Operation method and dosage: The max dosage for fat,oil and emulsified fat products is 10.0g/Kg, The max dosage for milk,dairy products and frozen drink is 5.0g/Kg, The max dosage for cake and fried foods is 2.0g/Kg, Technical index： Acid value(Calculated by KOH)/ (mg/g) ≤4.0 Iodine value(g/100g) ≤3.0 Free Propylene glycol w/% ≤1.5 Hydroxide value(Calculated by KOH) / (mg/g) ≥65 Saponification value(Calculated by KOH) / (mg/g) 150-190 Soap(Calculated by Potassium stearate) w/% ≤7.0 Total mono ester content w/% ≥ 40 Ignition residue w/% ≤ 0.5 Pb / (mg/kg) ≤ 2 Packaging: Aluminized bag vacuum packing with nitrogen inside. Net weight: 25 kg/carton(5kg/bag*5) Storage and transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.

Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. It’s an non-ionic surfactant with characteristics such as high temperature and acid resistance and HLB value is 7.2. Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fine and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 60℃ homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount: The addition maximum is 0.01% for bread and pastry, the maximum is 0.3% for ice cream. Technical Index : Acid Value (mgKOH/g) ≤5.0 Saponification Value (mgKOH/g) 120-135 Iodine Value (g/100g) ≤3.0 Sulfated Ash Content % ≤1.0 Heavy Metal (Calculated by Pb)% ≤0.001 Arsenic(Calculated by As)% ≤0.0003 Melting Point (℃) 53-58 Packaging： Aluminized bag vacuum packing with nitrogen inside. Net weight:25 KG/CTN(5KG *5) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.