Available
Specify the price
0
0
USD
Minimum order: 1 pcs
Supply ability: 1000 pcs/per month
DEMIREL DESIGN ENGINEERING
Not verified supplier
Turkey
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
EXPORTICO CORP
United States of America
USD
750.0/pcs
750.0
Alloy Or Not
Non-Alloy
Delivery Time
8-14 days
Brand Name
xinhongsheng
Model Number
HRB400 HRB 500
Application
Construction
Processing Service
Bending, Welding, Decoiling, Cutting, Punching
Application
Building Construction
Processing Service
Bending, Cutting
Type
Reinforced
Technique
Hot rolled
Grade
HRB400/HRB500 500E/500N Grade 60 500B SD400/SD500
Model Number
Reinforcement deformed steel bar
Shape
Straight, coil, once folded
LLC "Mithril"
Kyrgyzstan
USD
2998.0/pcs
2998.0
cast-iron manhole for pavement, lawn, carriageway, road, highway, etc.
Severouralsk Metal
Russia
Specify the price
USD
0
0
One of the materials most used in the construction of reinforced concrete buildings and foundations is A500C class reinforcement. The scope of its application is very extensive - from the reinforcement of simple reinforced concrete products to the strengthening of load-bearing structures. The letter A denotes a variety - in this case it is a hot-rolled rod, thermally and mechanically reinforced. The high strength of the material, achieved through a complex processing process, makes the scope of its application so extensive. The number 500 reports the yield strength of the rods. This indicator is one of the most important for the material. It shows how much load it can withstand without harm to itself. If the load exceeds the limit, then irreversible consequences occur in the metal, affecting the crystal structure. As a result, reliability and service life are significantly reduced. Therefore, the choice should be approached with particular care, pre-calculating the maximum loads that the S500 reinforcement will have to withstand. Finally, according to the letter C, it can be established that the material is weldable. Not all analogues have this property. After all, welding is accompanied by a sharp increase in temperature, due to which the crystal structure of the metal is disturbed - subsequently, its strength decreases at the welding points. With significant loads in these areas, the probability of breakage is highest. In addition, these areas are the most vulnerable to corrosion. So, welding of reinforcement is strictly prohibited. Because of this, when working with most varieties of metal rods, you have to use a special wire and knitting tool. But if you chose A500C rods, then you don’t have to worry - you can cook reinforcement of this brand without harm to it. Steel grade: А500С GOST: GOST 34028-2016 LxWxH: 11700x16x16 mm
Severouralsk Metal
Russia
Specify the price
USD
0
0
One of the materials most used in the construction of reinforced concrete buildings and foundations is A500C class reinforcement. The scope of its application is very extensive - from the reinforcement of simple reinforced concrete products to the strengthening of load-bearing structures. The letter A denotes a variety - in this case it is a hot-rolled rod, thermally and mechanically reinforced. The high strength of the material, achieved through a complex processing process, makes the scope of its application so extensive. The number 500 reports the yield strength of the rods. This indicator is one of the most important for the material. It shows how much load it can withstand without harm to itself. If the load exceeds the limit, then irreversible consequences occur in the metal, affecting the crystal structure. As a result, reliability and service life are significantly reduced. Therefore, the choice should be approached with particular care, pre-calculating the maximum loads that the S500 reinforcement will have to withstand. Finally, according to the letter C, it can be established that the material is weldable. Not all analogues have this property. After all, welding is accompanied by a sharp increase in temperature, due to which the crystal structure of the metal is disturbed - subsequently, its strength decreases at the welding points. With significant loads in these areas, the probability of breakage is highest. In addition, these areas are the most vulnerable to corrosion. So, welding of reinforcement is strictly prohibited. Because of this, when working with most varieties of metal rods, you have to use a special wire and knitting tool. But if you chose A500C rods, then you don’t have to worry - you can cook reinforcement of this brand without harm to it. Steel grade: А500С GOST: GOST 34028-2016 LxWxH: 11700x12x12 mm
Severouralsk Metal
Russia
Specify the price
USD
0
0
One of the materials most used in the construction of reinforced concrete buildings and foundations is A500C class reinforcement. The scope of its application is very extensive - from the reinforcement of simple reinforced concrete products to the strengthening of load-bearing structures. The letter A denotes a variety - in this case it is a hot-rolled rod, thermally and mechanically reinforced. The high strength of the material, achieved through a complex processing process, makes the scope of its application so extensive. The number 500 reports the yield strength of the rods. This indicator is one of the most important for the material. It shows how much load it can withstand without harm to itself. If the load exceeds the limit, then irreversible consequences occur in the metal, affecting the crystal structure. As a result, reliability and service life are significantly reduced. Therefore, the choice should be approached with particular care, pre-calculating the maximum loads that the S500 reinforcement will have to withstand. Finally, according to the letter C, it can be established that the material is weldable. Not all analogues have this property. After all, welding is accompanied by a sharp increase in temperature, due to which the crystal structure of the metal is disturbed - subsequently, its strength decreases at the welding points. With significant loads in these areas, the probability of breakage is highest. In addition, these areas are the most vulnerable to corrosion. So, welding of reinforcement is strictly prohibited. Because of this, when working with most varieties of metal rods, you have to use a special wire and knitting tool. But if you chose A500C rods, then you don’t have to worry - you can cook reinforcement of this brand without harm to it. Steel grade: А500С GOST: GOST 34028-2016 LxWxH: 11700x10x10 mm
Gleb Luzin
Russia
USD
16.35/pcs
16.35
Wholesale pressure boosting circulation pumps, new, excellent condition, suitable for various purposes, can be used at home for a bath, in the country for watering, etc.
Tessera
Russia
USD
9.37/pcs
9.37
Polymer sand hatches have long replaced cast iron and concrete counterparts. Due to the material of manufacture, polymer sand hatches combine the strength of cast iron, the ability to select the required load, the choice of color in combination with paving slabs or lawn. Advantages: Easy assembly Durability Economical Combination with other elements from other material Characteristics of goods: Composition: 75% sand; 25% polymers; dye. Types of hatches and gratings: Hatch revision PPK type "dacha" d-560 up to 0.8t. Black; 750 rub. Inspection hatch PPK type "LM" (light small) d-580 up to 1.5t. Black; 860 rub. Inspection hatch PPK type "LM" (light small) d-580 up to 1.5t. Green, red; 900 rub. Hatch revision PPK type "L" (light) d-580 up to 3t. Black;1260 rub. Hatch revision PPK type "L" (light) d-580 up to 3t. Green, red; 1300 rub. Hatch revision PPK type "C" (medium) d-600 up to 6t. Black;1520 rub. Hatch revision PPK type "ULSP" (Reinforced average) d-630 up to 7t. Black;1980 rub. Hatch revision PPK type "ULSP" (Reinforced medium) d-630 up to 12.5t. Black; 2100 rub. Hatch revision PPK type "ULTP" (Reinforced heavy) d-640 up to 15t. Black;2350 rub. Hatch revision PPK type "ULTP" (Reinforced heavy) d-640 up to 25t. Black;2850 rub. Hatch revision PPK type "ALTP" (Reinforced main) d-640 up to 25t. Black;4130 rub. Reinforced storm water inlet round heavy PP (ADKT) d-640 25t black; 3990 rub. Reinforced storm water grate heavy PP (ARDTP-B) 890X590X80 black; 4030 rubles. Reinforced storm water grate heavy PP (ARDTP-B) 830X410X70 black.3160 rub.
Goldstar Developments ltd.
Шымкент, Kazakhstan
USD
31.63/pcs
31.63
Ball valves and valves brand STAUFF (directly from Europe via China). Models: BBV-2-25S-8001-M QRC-FF-10-F-G06-BT-W3 QRC-FF-10-M-G06-BP-W3. By pre-order: 3 weeks PRODUCT IS IN CHINA!
Lumber export
Russia
USD
4.9/m2
4.9
Composite fittings from the manufacturer, without intermediaries and outsiders. Sending across all Russian Federation and Export. For all questions, write or call to discuss.
DEMIREL DESIGN ENGINEERING
Turkey
Specify the price
USD
0
0
HORIZONTAL AND VERTICAL SHAFT DETACHABLE BODY PUMPS
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message