Обогреватель потолочный инфракрасный 400 Вт - 35566

Alternate Heating Systems creates high-grade, efficient residential and commercial heating systems. We strive to pave the way in the energy industry by offering efficient heating solutions that allow our customers the ability to save $100's or $1,000's without being married to it. We manufacture a wide range of products including wood gasification, coal stokers, traditional hand-fired, and even waste-oil boilers. Our solutions are lasting and are meant to operate for a lifetime.

PVC blind screen for Ventale heating radiator. Features of the model: the front panel of the screen is made of louvered PVC slats. The front panel is attached to the metal frame with hardware. Why: used to mask heating radiators, gives an aesthetic appearance. From what: the frame of the screen is made of cold-rolled steel, the front panel is made of PVC. IMPORTANT!!! Supplied unassembled, requires screw assembly.

Model for connection both individually on the device, and for several pieces of equipment. It is widely applicable in case of a strong voltage drop, for powering the gas boiler, or appliances with a capacity of up to 1 kW. 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking. The electronic unit of the voltage regulator SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input. SUNTEK voltage regulator will be your network status indicator. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything by itself and will give the best option for this situation.   3 year warranty

Model for connection both individually on the device, and for several pieces of equipment. It is widely applicable in case of a strong voltage drop, for powering the gas boiler, or appliances with a capacity of up to 1 kW. 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking. The electronic unit of the voltage regulator SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input. SUNTEK voltage regulator will be your network status indicator. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything by itself and will give the best option for this situation.   3 year warranty

RUF fuel briquettes Packed in bags of 10 pieces The beauty of wood fuel briquettes is their environmental friendliness: they burn so cleanly that the neighbors think - you have returned to gas heating again. Fuel briquettes are used as solid fuel for boilers, fireplaces and stoves of all kinds. The production technology is based on the pressing process under high pressure. Since fuel briquettes made of wood are an environmentally friendly product and burn almost smoke Lesly, it is ideal to use them for heating residential premises (houses), baths, greenhouses. We organize delivery and unloading of fuel briquettes across Ukraine. Characteristics Size 200x125x65 mm Ash content 0.5% moisture 8% Calorific value 4700 kcal/kg Density 1.25 t/m3

Wall-mounted gas turbocharged single-circuit boiler with a capacity of 36 kW. Forced removal of combustion products. Ease of installation and ease of maintenance Gas; Remote control; Cascade Description. Gas wall-mounted heating boiler. The power of the device is regulated by a modulating burner. Forced removal of combustion products through a certified chimney / air duct system. Installation possibilities. Heating and water heating (in combination with a DHW cylinder). Possibility of installation in a residential area. Suitable for reconstructed and under construction residential buildings and apartments, where it is impossible to install a chimney of a conventional design. Minimum side clearance required is 10mm, all units are accessible from the front. Possibility of combination with different types of water heaters type VIH for domestic hot water preparation. Possibility of use in dusty rooms. Equipment: LCD display with backlight, push-button control. Internal software for status monitoring, parameter setting and troubleshooting. Built-in circulation pump with automatic stage switching, closed expansion tank, automatic air vent, automatic adjustable bypass valve, motorized safety valve "Intelligent" pressure control in the heating system. Copper primary heat exchanger with average efficiency >=91%. Chrome-nickel steel burner. Built-in DHW cylinder control. Permanent frost protection. Protection against jamming of the pump and three-way valve. Switch "WINTER / SUMMER" Possibility of setting to partial power in heating mode. Electronic ignition and control of all functions. Connecting kit included in delivery. Built-in switching module for eBus interface Turbocharged boiler. Depending on the design solution of the boiler room, it allows organizing an air supply and smoke exhaust system through the wall.

DESCRIPTION The heat exchanger can be of water or steam variety. The heat exchanger with bimetallic spiral-rolled aluminum fins of heat-transfer elements is designed for heating of the air in HVAC systems. The heat exchangers with finned tubes are designed for use in areas with the temperate climate.   The heating medium for water heat exchangers is water with the temperature of max. 150°C and the pressure generated by the pumps in the system is maximum 1.2 MPa.    The heating medium for steam heat exchangers is dry saturated or superheated steam with the temperature of max.150°C and the pressure generated by the pumps in the system is maximum 1.2 Mpa.   Installation and Principle of Operation of the Heat ExchangerThe heat exchanger consists of heat dissipating elements (finned tubes), tube sheets, covers and removable side shields.   For installation and fastening of heat exchangers during the mounting stage, 11x15 oval holes are provided on the sides of the tube sheets and removable shields.   The connecting dimensions of all heat exchangers with a single pitch of 125 mm make it possible to assemble heat exchangers by the height and length and to assemble the heat exchanger with the air capacity of up to 500,000 m3/h.   The heat-transfer element consist of finned tubes which are made of the 16x1.5 mm steel tube and aluminum rolling fins with the diameter of 39 mm. The step between the ribs is 3 mm.Side covers with partitions are welded onto the unit in accordance with the number of coolant strokes.In order to minimize rejects, before shipment, each heat exchanger made by the Metallist Plant passes the quality control.   In particular, the heat exchanger is subjected to hydraulic tests for strength and tightness, under pressure during 2 minutes, after which its outline dimensions, welding seams, appearance and completeness are checked.Heat Exchanging Element - Finned Tube Designed to dissipate heat from the coolant into the environment. The heat exchanging element is the bimetallic finned tube made of a steel tube with the diameter of 16 mm and aluminum rolling fins with the outer diameter of 39 mm, with the pitch between the ribs of 3.0 mm.

ESCRIPTION The air heating unit worms the air using the heat of hot or overheated water or steam coming from external sources of heat supply and is designed for air heating (including standby heating) of industrial premises, the technological process of which is not accompanied by any release of dust or explosive gases.  The unit should be operated in areas with a temperate climate. The heat transfer agent temperature should not be higher than 180°C and the pressure should be not higher than 1.2 MPa.  Principle of operation: When the fan is in operation, the air is taken from the room and heated up as it passes through the air heater. Air heater consists of finned tubes with working media hot water or steam. Then it is ducted through the fan working wheel blades into the heated area.   If heat transfer agent change on cool fluid then the unit works as cooling equipment.

Searching for the best fireplace grates? Look no further than Grate Wall of Fire's high-efficiency vertical fireplace grates. You and your loved ones can now enjoy smoke-free, self-feeding fires and prevent a smoky fireplace from occuring.

ОПИСАНИЕ: Уголь хорошего качества. К12. ШУБАРКУЛЬ. САТ КОМИР, КУЗНЕЦКИЙ. Орешки сорт. Качество гарантировано. Доставка в Европу.

ENplus A1 and DINplus Wood Pellets Application: Heating System Density: 600kg/m3 - 800kg/m3 Diameter: 6mm~8mm Shape: Stick Length: 10mm - 40mm Calory (J): 5100 Moisture (%): 4 Place of Origin: Germany  Brand Name: ENplus A1 and DINplus Wood Pellets Model Number: Inside15kg Bags Ash Content (%): 0.3 Wood pellets: Heating Bulk Wood Pellets Product Name: 100% Wood Pellet Biofuels EN Plus-A1 Wood Pellets: Heating Bio Fuel Wood Pellets High quality 100% wood pellet biofuels: Heating Bulk Pine Wood Pellet Supply Ability 50 Forty-Foot Container per Week Packaging & Delivery Packaging Details 15kg 25kg, 50kg bag per package

Temperature controller digital w3002 heating / cooling modes, users can freely set the start / end temperature; With large and clear LED display for better readability. Power supply 220V, power 1500W.Easy to use: three buttons for easy operation, to set the start temperature, stop the temperature, adjust the temperature, delay the start time.Two operating modes: heating (the start temperature is less than the end), cooling (the start temperature is higher end temperature) Application: waterproof sensor, can be used to detect water or other non-corrosive liquids. Temperature of objects, for aquariums, ornamental fish and othersW3002 thermostat operating instructions: Set the start temperature; Press the up button once to show the start temperature, press the top button for about 3 seconds, start the temperature and digital flicker, and set the desired temperature value through the top and bottom keys. Set the stop temperature: Press the button to show the stop temperature, press the button about 3 seconds, stop the temperature and flicker digitally, and check the desired temperature value with the upper and lower keys.