Glass heater 400 W - 35571

Logistic Auto LLC is a major supplier and exporter of milled peat. We invite you to conclude a contract for the supply of milled peat with the following characteristics: High separated peat in big bags with a volume of 5000 liters. Characteristics: pH aqueous 3.5-4.5% - acidic 5.5-6.5-neutralized. Humidity no more than 65% * separated peat, acidic 8 separated peat, neutralized.

Charcoal briquettes are a high-quality fuel and can also be used in the production of crystalline silicon to replace part of the lump charcoal. Briquettes have high mechanical strength (6.9-9.8 MPa), increased density (0.9-1 g/cm3), high calorific value (30,000-32,000 kJ), and low hygroscopicity. Charcoal briquettes are a modern high-calorie biofuel produced using special equipment from charcoal screenings using the pressing method. The plant origin of the raw materials provides this fuel with exceptional environmental friendliness when used in any required quantity. Charcoal fuel briquettes are the same charcoal, only compressed. Food starch is used as a binder. A positive aspect when using charcoal briquettes as fuel is their minimal impact on the environment during combustion compared to classic solid fuel (no slag, increased smoke, and other carcinogenic substances). They combine all the advantages of charcoal, while having undeniable advantages.

JIBAU™ Thermo Glass Series TG1000BDU Electric Heater with Glass Panel   Standing out with its innovative design, this model offers an aesthetic appearance by using tempered glass on its front and back surfaces.   Bidirectional Heating Technology: The two-way heating feature distributes heat equally to the front and back of the device, providing a homogeneous temperature in the space. Powerful Heating Capacity (2000 Watt) With Less Energy Consumption Offering high-performance heating with 2000 Watt power, this model provides effective and rapid heating in closed areas. Energy savings of up to 75 percent can be achieved with heat battery technology and the interior design structure that does not keep the heat inside but allows it to quickly spread to the outside environment. For example, in our tests, in a closed area of 29 m2 with good insulation and a ceiling height of 2.7 meters, when the outside air temperature was -3 degrees Celsius, the device operated with an average of 450 Watts and kept the environment at 24.5 degrees Celsius. It shows that this heater device with 2000 Watt resistance provides an average saving of 77.5 percent under these conditions. Tempered Glass Surface: An important safety feature, the tempered glass surface is designed for durability and longevity. Digital Display Thermostat Control: The digital display thermostat allows precise heat control and allows users to easily adjust the temperature level they want. Easy Operation with Remote Control: The integrated remote control allows users to conveniently control the device, providing a user-friendly experience. Large Heating Area: It performs effectively within a wide heating area of 18-35 m², so it can easily heat different spaces. Various Color Options (10 Color Charts): 10 different color options offer users an aesthetic that suits their decorative preferences and adapts to the design of the space. 5 Year Limited Warranty: The product is backed by a 5-year limited warranty, providing users with a reliable and long-lasting heating solution. High Energy Saving (A+++ Classification): A+++ energy saving classification provides cost advantage to the user by providing environmentally friendly and energy efficient operation. Various Usage Areas: This product, made in Turkey, is suitable for use in different places such as home, office, workplace and store, and emphasizes the quality of domestic production. High Voltage Capacity (220 Volt): The 220 Volt high voltage capacity offers a wide range of uses and is suitable for use in different electrical systems. Barcode: The product is identified with the barcode 0310147302814. ​ Key Highlights of Our Low Energy Consumption Electrical Heaters State-of-the-Art Design: Our heaters boast a sophisticated and contemporary design that seamlessly integrates with modern living spaces, setting them apart from conventional heating solutions. Cutting-Edge Heating Technology: Leveraging the latest advancements in heating technology, our products offer unparalleled efficiency, ensuring optimal warmth with minimal energy consumption. Unique Storage Technologies: JIBAU's R&D team has pioneered distinctive storage technologies within our heaters, providing a revolutionary approach to energy utilization and storage. This innovation enhances the overall performance and reliability of our heating solutions. Environmental Sustainability: Committed to environmental responsibility, our heaters are crafted with eco-friendly materials and designed to reduce carbon footprint, aligning with the global push for sustainable living.   Technical Information Bidirectional Heater Front and Back Surface Tempered Glass 2000 Watt Power Digital Display with Thermostat Remote control Directions: 55 x 20 x 45 cm Heating Area: 19-35 m² Colors: 10 Different Color Charts 5 Year Limited Warranty Energy Saving Classification A+++ Suitable for Home, Office, Workplace, Store Use 220 Volts Barcode: 0310147302814   Product images may vary

Customizable Temperature Control No matter what you wear on your feet, JIBAU™ Electric Foot Warmer FW500TG offers you a suitable temperature. It has a remote-controlled digital thermostat on which the temperature can be adjusted between 30 and 75 degrees Celsius. In this way, the temperature of the glass surface that warms your feet can be adjusted according to your different temperature needs with bare feet, socks, slippers or shoes. Thus, your feet can be warmed as you wish, at home, in the office, while naked, or while wearing slippers or shoes. The first stage is the lowest temperature used with bare feet or socks, while the second stage is suitable for slippers. The third stage is ideal for products with thick soles such as shoes, boots and boots, with the higher temperature radiating from the glass surface. Preserve your style while keeping your feet warm with the temperature options that best suit you.   High Technology and Health Come Together JIBAU™ Electric Foot Warmer FW500TG brings warmth and health together in your homes and offices. It combines the elegance of tempered glass with low energy consumption. While it warms your feet, it also adds an aesthetic touch to your living space.   The Elegance of Tempered Glass JIBAU™ Underfoot Warmer adds elegance to your homes and offices with its tempered glass surface and offers a health and environmentally friendly option. Glass is a natural material that is easy to clean, does not retain dirt and most importantly. Thanks to these features, it provides hygienic conditions while warming your feet healthily.   TECHNOLOGICAL FEATURES 1. Durable Tempered Glass Surface JIBAU™ Foot Warmer FW500TG stands out with its durability. Thanks to the tempered glass, it is extremely resistant to falling hard objects and even hammer blows. The chance of the glass breaking is very low. So your security is always under control. 2. Safe When Broken Even in the event of a sad breakage, you don't have to worry. Since tempered glass does not create sharp edges when broken, there is no risk of cutting or injuring. This feature ensures safe use, especially for children. 3. Children and Family Safety The safety of children and family members is one of our top priorities. JIBAU™ Electric Foot Warmer is a product that you can use comfortably in your home and office, ensuring the safety of your children and family. Your safety and health are valuable to us. With the JIBAU™ FW500TG, there are no compromises in this regard. It has 10 colours and can be produced for the a specific colour due to your needs and the quantity needed.    Technicial Specifications 250 Watt Power 220 Volts Current: 0.90 A Frequency: 50-60 Hz Digital Thermostat Control: Between 30-75 degrees Energy Saving Module: Automatic On/Off Switch: On thermostat Cable Length: 2 meters Barcode: 0310147302609 Dimensions: (L): 50cm (W): 45cm (h): 9cm Weight: 6.5 Kg Protection class: Standard TS 5107 EN 60335-2-30 Ambient Temperature Display: None Material Structure: Glass – Metal 5 Year Warranty Suitable for Home, Office, Workplace, Store Use

We are a Supplier of wholesale and distributor of wood pellets, we offer EN plus A1 wood pellets in 15 kg bags. There is a possibility of delivery in the form of a big bag available in the amount of 500 tons/month. All There are 70 bags of 15 kg (1050 kg) on ​​the pallet. There is a possibility of delivery directly to the place indicated by the customer.

Wood pellets class A1. Diameter: 6mm-8mm. Low dust content <1% High ash melting point >1200°C. Made from the finest virgin forests. Categories: Energy, WOODEN PELLETS. Description: 6 mm wood pallets are a convenient, economical and effective way to heat your home or company using domestic and external fuel. 6mm softwood pallets: hardwoods such as maple, oak, birch and ash. We all know that we need to place conifers such as pine, fir and spruce. Consumption of wood pellets in Europe: The majority of consumption is for heat production, accounting for 61.8%. The consumption of pallets for heating can be divided into three markets: home heating (69%), commercial heating (19%) and heat generated by combined heat and power plants (12%). The remaining 38.2% of wood pallets were used for energy production. It is important to note that technologies for producing energy from pallets into heat, electricity or both are mature and offer efficient and reliable processes. Benefits of 6mm thick wood pallets: If you want a reliable source of heat, save money and help protect the environment, 6mm thick biomass wood pallets are a great choice. When pallets are burned, they release the same amount of carbon dioxide that woody biomass absorbs during growth, making them carbon neutral.

Air heating may be needed in both domestic and industrial environments. To do this, you need to use a special air heating element, which will successfully cope with tasks of any complexity. If you want to buy high-quality dry electric air heating elements, the price of which will be reasonable, PC "Marion" is ready to offer you its services. Our company practices an individual approach to the situation of each client. Technical characteristics: - Length of the heating element (length of the metal shell of the heating element when unfolded) up to 6000mm - Diameter of the heating element tube: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm - Shape and configuration of heating element: any, specifying dimensions or according to drawings and sketches. - Power: calculated taking into account the operating parameters of the heating element. depending on diameter, tension, length. - Working environment: air and other gases and mixtures of gases, casting molds, compression molds, defrosting refrigeration units. - Voltage: on request 12; 24; 36; 42; 48; 60; 127; 220; 380. - Options or material for manufacture: stainless steel, carbon steel, titanium, seamless stainless steel. - Contact group options for connection: threaded rod, flat pin contact, welded insulated wire with or without a sealed rubber coupling and other options on request. - Mounting strips: if necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes. - Complete with threaded fittings: m18, m12, m10, m14 and others. materials - stainless steel, brass, carbon steel.

At Marion you will find a wide range of water heating elements of various price categories. The company's warehouse has heating elements of various shapes and designs, and you can also order the production of heating elements to order. The price of such a device is quite reasonable and fully corresponds to its high quality. Manufactured according to GOST from high quality materials. Production time according to specifications is 7-10 days. Urgent production by agreement. Shipment of warehouse items on the day of payment Availability of certificates. 12 month warranty. Additional discounts for orders of 10 pieces or more. Regular customers receive various bonuses, discounts, deferred payment, free delivery. Delivery to any city in Russia. Material: Carbon steel; Stainless steel; with fins; with Teflon coating; seamless pipe; in a fluoroplastic shell.

Heating element for oil of the highest quality. Technical characteristics: Heating element length (length of the metal shell of the heating element when unfolded) up to 6000 mm. Heating element tube diameter: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm (on request we can produce other diameters that differ from GOST) Shape and configuration of the heating element: any, specifying the dimensions or according to drawings and sketches. Power: Calculated taking into account the operating parameters of the heating element depending on diameter, voltage, length. Working medium: solution of alkalis and acids; air and other gases and mixtures of gases; Fats, oils and other viscous liquids; alkali; Low-melting Metals; Aggressive solutions of alkalis and acids; Voltage: On request 12; 24; 36; 42; 48; 60; 127; 220; 380. Options or material for construction: Stainless steel, carbon steel, finned, titanium, PTFE sheathed, Teflon coated, seamless stainless steel. Contact group options for connection: Flat pin contact, welded insulated wire with and without a sealed rubber coupling, threaded rod and other options on request. Mounting strips: If necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes.

The Marion company is a direct supplier of terminal blocks made of porcelain and ceramics from various manufacturers and has a large selection of sizes available for different wire cross-sections. Ceramic terminals for connecting wires Werit (Germany) and Electric ceramic (China). With mounting hole. Insulating material Porcelain, glazed. Terminal made of brass or copper, nickel plated Screws galvanized steel, yellow chrome plated. Heat resistance up to 350 C. Operating temperature 200 C.

We offer the production of industrial ring heaters in accordance with the customer’s sketches and technical requirements. - production time from 3 days. - sealed nozzle heaters made of brass are available in stock Ø from 25mm to 100mm with different widths and power. - heating element: nichrome tape or insulated spiral. - type of insulation: micanite in the housing, ceramics in the housing, cast aluminum. - manufactured according to GOST from high quality materials, certificates, 12 month warranty. Technical characteristics: bore diameter: 25-1000mm width: from 15mm supply voltage: 12v, 24v, 36v, 110v, 220v, 380v and other values on request. power: calculated according to the permissible specific power load or manufactured according to the customer’s required characteristics.

Technical characteristics of TENP: heater diameter: 6-25 mm. heater length: 40-3500mm supply voltage: 12v, 24v, 36v, 110v, 220v, 380v and other values on request. Shell material: stainless steel, carbon steel available on request. power: calculated according to the permissible watt load for the application in the required conditions. water = 15W/cm; air = 5W/cm; metal forms = 15W/cm, values for other operating conditions on request. operating temperature on the heater surface: 300°C, on request special versions 500°C and higher. equipment with fittings: m10-m27; g1/2; g3/4; g1; g1 1/4, (brass, stainless steel, carbon steel). Application: - for heating metal forms by mounting them into the body of the workpiece in a drilled hole, - for heating air and gases, - for heating fats and oils, - for water and weak solutions of acids and alkalis.