Wholesale mattresses - 38478

Turkish premium mattress with 7 zones of rigidity for the best body support. The mattress is based on a block of independent Pocket Springs - 620 pcs per 1 bed. Each spring in such a block is in a separate fabric cover and operates (compresses and decompresses) independently of neighboring springs. This allows you to provide targeted support to the spine, which on such a mattress takes an anatomically correct position. The mattress is of medium hardness and provides maximum sleeping comfort at any time of the year. Inside the mattress there is a layer of HyperSoft foam that takes the shape of the body. An additional topper on the mattress reduces the load on the body and provides the best possible support for the spine. Mattress height 33 cm. Load per bed 110 kg. The deep stitching of the jersey knit cover gives the mattress a rich look. The surface of the mattress is pleasant to the touch. Pocket Springs made of stainless steel 2.2 mm. The mattress has an antibacterial layer; it does not harbor bedbugs, ticks and other guests. The orthopedic mattress, due to the large number of springs and the combination of components inside the mattress, reduces the load on the body and has an anti-stress therapeutic effect on the body.

Pedal split (with head guard) Fits most cars and some hatchback cars. Made of soft flocking and Eco-friendly material. Unique design makes mattress more comfortable. Additional headrest, reduce travel fatigue. 3-in-1 air nozzle design makes it inflate and deflate quickly. Additional guardrail design to reduce the risk of accidental injury to children. Equipped with multi-functional seat charger and vehicle air pump, easy to use. Comes with storage bag for easy storage.

Mattress comfort BIO latex: 1. Quilted cotton. 2. Material of natural origin (latex) 3. Reinforced spring block. 4. Frame rigidity. 5. Coconut coir. 6. 40mm foam mattress support reinforcement system. 7. Insulating layer-spunbond. 8. Viewing zipper. Characteristic of a mattress: Mattress of average rigidity. Based on a reinforced Bonnel spring block 14.5cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading the sleeping place increases, resistance to deformation along the perimeter, and the life of the mattress is extended. As an insulating layer between springs and spunbond fillers. For the manufacture of fabric is used - cotton quilted on a 250 gram synthetic winterizer. Naturalness is the main value of natural material. The cover is equipped with an additional option in the form of a viewing zipper. The board is reinforced with 40mm thick foam. Coconut coir - creates the right balance of stiffness. The weight is evenly distributed on the springs, good support for the back muscles for the sleeper. Latex - this material, the leader for the manufacture of orthopedic mattresses. Natural filler provides anatomical support for the entire spine, eliminates sagging of the lower back. Mattresses of medium hardness guarantee the highest orthopedic properties and good sleep. The vertebrae are securely fixed in an anatomically correct position. Suitable for almost everyone. The height of the finished product is from 21 to 23 cm.

Mattress comfort BIO strutto: 1. Quilted cotton. 2. Reinforced spring block. 3. Frame rigidity. 4. Coconut coir 5. 40mm foam mattress perimeter reinforcement system. 6. Non-woven fabric made from natural fibers. 7. Polyester fiber (Forplit). 8. Insulating layer-spunbond. 9. Viewing lightning. Characteristic of a mattress: Mattress of the third degree of rigidity. Based on a reinforced Bonnel spring block 14.5cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading the sleeping place increases, resistance to deformation along the perimeter, and the life of the mattress is extended. As an insulating layer between springs and fillers - spunbond. For the manufacture of the cover, a cotton fabric quilted on a 250-gram synthetic winterizer is used. Naturalness is the main value of natural material. Soft and smooth fabric, does not cause irritation. Ideal value for money. The cover is equipped with an additional option in the form of a viewing zipper. The board is reinforced with 40mm thick foam. Coconut coir - creates the right balance of stiffness. Thermal felt layer - gives additional reinforcement to the structure. Forplit is an insulating layer that increases comfort. The basis of the material is 100% hypoallergenic fiber. The height of the finished product is 23 cm. In the production of our mattresses, the Fortuna company uses safe materials both in relation to humans and nature.

Mattress Comfort BIO premium: 1. Quilted cotton. 2. Soft foam layer 20mm. 3. Reinforced spring block. 4. Frame rigidity. 5. Coconut coir. 6. 40mm foam mattress support reinforcement system. 7. Non-woven fabric made from natural fibers (thermal felt). 8. Insulating layer - spunbond. 9. Viewing lightning. Characteristic of a mattress: Mattress of average rigidity. Based on a reinforced Bonnel spring block 14.5cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading the sleeping place increases, the resistance to deformation of the mattress around the perimeter, and the life of the mattress is extended. Spunbond is used as an insulating layer between springs and fillers. For the manufacture of fabric-cotton quilted on a 250-gram synthetic winterizer. The cover is equipped with an additional option in the form of a viewing zipper. 40mm thick foam is used as bead reinforcement. Due to the soft layer. the mattress has softness and elasticity. Coconut coir - creates the right balance of stiffness. Thermal felt layer - gives additional reinforcement to the structure. The height of the finished product is from 23 to 24 cm.

Mattress Comfort classic with felt: 1. Jacquard fabric. 2. Soft foam layer 20mm. 3. Classic spring block. 4. Frame rigidity. 5. 40mm foam mattress support reinforcement system. 6. Non-woven fabric made from natural fibers (thermal felt). 7. Insulating layer - spunbond. Mattress characteristics: The mattress is moderately soft, based on reinforced spring block Bonnel 14.5cm, with two frames of rigidity. Frame in spring blocks, increases edge rigidity. For the manufacture of the cover, a fabric is used - Jacquard, quilted on a 70 gram synthetic winterizer. Jacquard fabrics have a number of advantages: product strength, abrasion resistance, ease of care. Foam is used as reinforcement and a soft layer on both sides. A layer of thermal felt - gives rigidity to the mattress. The system of protection of comfortable layers is spunbond. The height of the finished product is from 20 to 23 cm.

Mattress Comfort classic frame felt: 1. Jacquard fabric. 2. 30mm soft foam layer. 3. Classic spring block. 4. Frame rigidity. 5. 40mm foam mattress support reinforcement system. 6. Non-woven fabric made from natural fibers (thermal felt). 7. Insulating layer - spunbond. Mattress characteristics: A mattress of moderate softness, based on a reinforced spring block Bonnel 14.5cm. With two stiffening frames, used to increase edge stiffness. For the manufacture of used fabric - Jacquard, quilted on a 70 gram padding polyester. Foam is used as reinforcement and a soft layer on both sides. The thermofelt layer adds rigidity to the mattress. Comfort layer protection system - spunbond. the height of the finished product is from 20 to 23 cm.

Mattress Comfort BIO: 1. Quilted cotton. 2. Soft foam layer 20mm. 3. Reinforced spring block. 4. Frame rigidity. 5. Coconut coir. 6. 40mm foam mattress support reinforcement system. 7. Insulating layer-spunbond. 8. Viewing zipper. Characteristic of a mattress: Mattress of the second degree of rigidity. Based on a reinforced Bonnel spring block 14.5cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading increases, the life of the mattress is extended. Spunbond is used as an insulating layer between springs and fillers. For the manufacture of the cover, a fabric is used - cotton quilted on a 250 gram synthetic winterizer. Naturalness is the main value of natural material. Soft and smooth fabric, does not cause irritation. The cover is equipped with an additional option in the form of a viewing zipper. The board is reinforced with 40mm foam. Due to the soft layer, the mattress has softness and elasticity. Coconut coir - creates the right balance of stiffness. The height of the finished product is from 21 to 23 cm.

Mattress polycotton classic frame felt: 1. Quilted polyester. 2. Classically spring block. 3. Frame rigidity. 4. Soft layer 30mm. 5. 40mm foam mattress support reinforcement system. 6. Non-woven fabric of natural fibers (thermal felt). 7. Insulating layer-spunbond. Mattress characteristics: mattress of moderate softness. Based on a reinforced Bonnel spring block 14.5 cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading the sleeping place increases, the resistance to deformation of the mattress around the perimeter, and the life of the mattress is extended. For the manufacture of the cover, polyester fabric is used, quilted on a 70 gram synthetic winterizer. Foam is used as reinforcement and a soft layer on both sides. Due to the soft layer, the mattress has softness and elasticity. An interlayer of thermal felt increases rigidity, a safe, hypoallergenic material - both in relation to nature and to humans. The system of protection of comfortable layers is spunbond. The height of the finished product is from 20 to 23 cm.

Comfort mattress economy: 1. Jacquard fabric. 2. Classic spring block. 3. Frame rigidity. 4. Soft foam layer 20mm. 5. 40mm foam mattress support reinforcement system. 6. Insulating layer - spunbond. Characteristics of the mattress: Mattress of the first degree of rigidity, based on a reinforced spring block Bonnel 14.5 cm, with two frames of rigidity. Frame in spring blocks to increase edge stiffness. For the manufacture of the cover, a fabric is used - Jacquard, quilted on a 70 gram synthetic winterizer. Jacquard fabrics have a number of advantages: durability of the product, resistance to abrasion, ease of maintenance, beautiful appearance. Foam is used as reinforcement and a soft layer on both sides. The system of protection of comfortable layers is spunbond. the height of the finished product is from 20 to 23 cm.

Mattress polycotton classic with frame: 1. Quilted polyester. 2. Reinforced, classic spring block. 3. Frame rigidity. 4. Soft foam layer 30mm. 5. 40mm foam mattress support reinforcement system. 6. Insulating layer - spunbond. Mattress characteristics: Mattress of the first degree of rigidity. Based on a reinforced Bonnel spring block 14.5 cm, with two stiffening frames. When applying reinforcement, the mattress has a number of advantages: the possibility of loading the sleeping place increases, resistance to deformation, and the period of mattress operation is extended. For the manufacture of the cover, polyester fabric is used, quilted on a 70 gram synthetic winterizer. Foam is used as reinforcement and a soft layer on both sides. Due to the soft layer, the mattress has elasticity. The height of the finished product is from 20 to 23 cm.

Mattress Policotton economy felt: 1. Quilted polyester. 2. Classic spring block. 3. Soft foam layer 30mm. 4. 40mm foam mattress support reinforcement system. 5. Non-woven fabric made of natural fibers (thermal felt) 6. Insulating layer - spunbond. Mattress characteristics: Mattress of moderate softness, based on the Bonnel spring block 14.5 cm. The bonnel module is a classic of the mattress genre. The advantages of this block is in the democratic price, durability. For the manufacture of the cover, fabric is used, polyester quilted on a 70 gram synthetic winterizer. The fabric is durable and wear resistant. Foam is used as reinforcement and a soft layer on both sides. Due to this, the mattress has a smooth and aesthetic appearance. Thermal felt layer - used to isolate the spring block from fillers, stiffens the mattress. The system of protection of comfortable layers is spunbond. The height of the finished product is from 20 to 23 cm.