Hex key - 80321

Industrial PCB Electronic Board Design, Mass Production, Embedded Software, PLC Software, Control Panel Production, Industrial Machine Automation, Data Logger, Electronic Circuit Design, Electronic Board Design, Circuit Design with ESP32, Arduino Software, Arduino Circuit Design, Arduino Software Development etc. . Machine Automation, Industrial Automation, PLC Programming, Data Logger, IoT Systems, Control Systems, Control Panel, Automation Panel Production, Interface Software.

INDIVIDUAL HEATING POINTS Advantages:   OWN MODERN PRODUCTION; DEVELOPMENT IN ACCORDANCE WITH SP 41-101-95 "DESIGN OF THERMAL POINTS"; THE LAYOUT OF THE BLOCKS TAKES INTO ACCOUNT THE FEATURES OF THE ROOM LAYOUT; CRIMPING OF ALL COMPONENTS OF THE PRODUCT BEFORE SENDING TO THE CUSTOMER; COMPONENTS FROM THE WORLD'S LEADING MANUFACTURERS; ARGON ARC WELDING, SEMI-AUTOMATIC WELDING; POWDER COATING OF PIPELINES; FULL FACTORY READINESS WITH INSTALLATION OF THERMAL INSULATION; RIGID WELDED FRAME CONSTRUCTION; FULL CONTROL AT ALL STAGES OF PRODUCTION; AUTOMATION OF PROCESSES; THE ABILITY TO CONNECT TO THE DISPATCHING SYSTEM (MODBUS RTU RS-485, ETC.); EXTENDED WARRANTY. An individual thermal point (ITP) is an engineering and technical product consisting of elements of hydraulic systems combined into functional blocks and designed to account for, control and convert the parameters of the liquid at the inlet into the required parameters at the outlet, ensuring the design flow of energy transfer processes in heat consumption systems at construction sites.   A thermal point is a product of maximum factory readiness, consisting of one or more blocks, which allows solving heat supply problems for heating, ventilation and hot water supply systems.   Depending on the requirements of the technical specification, the Customer's wishes and the characteristics of the facility, the thermal point may consist of the following blocks: a node for entering and accounting for thermal energy, heating, ventilation, and hot water supply.   All thermal points are equipped with control cabinets by default for the implementation of:   control of temperature parameters in accordance with temperature conditions; control of pumping groups; remote monitoring. The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Experience the unmatched quality of the Ronix 8905K cordless hammer drill kit. The high-efficiency brushless 20V motor has enabled this tool to take care of a wide range of applications with three main functions: drilling, Screwing, and hammer drilling. A brushless motor has a 50% longer lifetime and 25% more speed. A drill with a brushless motor is lighter in weight, makes less noise, and might run longer than the same cordless drill fitted with a brushed motor. The Ronix 8905K has a compact, ergonomic design built with the latest technology

Interactive table BASIC 43 or LigaSmart IT 43, equipment with adjustable tilt angle, atmospheric lighting and 4K resolution.

Multi-touch touch table LigaSmart IT 32 or BASIC 32, equipment included in the register of MINPROMTORG and REP, is intended for drawing, annotation on top of an image, information and navigation. The adjustable tilt angle allows several people to work with the touch table at the same time. Atmospheric lighting attracts attention.

Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. Net Weight:2750g 8. Tool Length:1120mm 9. Packing:4pcs/14kg/16kg/1.32'   Application: It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use. When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.   Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed.   Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair   Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries   Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'

Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'