Pleated air filters of all cleaning classes and standard sizes - 91854

Drip catcher Floor filter G65 – 75mm thickness Width 750 – 1000mm. Roll length - 20000 mm. Glass fiber filter impregnated with sticky liquid for binding dry dust. Pre-filter G3(EU3), G4(EU4) Width 2000 mm, roll length - 30000 mm To protect the ceiling filter type NF 600 or NF 300 in order to increase the service life Corrugated cardboard filter Height 750 - 900 - 1000 mm. (in a package of 10 sq.m.) It is used for high loads on paint particles. Capacity up to 18 kg of paint per 1 sq.m. EXP paper filter Width 1000 mm, roll length - 12000 mm Unique multi-layer paper filter (used in the USA) NF600 "ceiling filter" Possible dimensions in width 1200 - 1430 - 1650 - 2000 - 2100 mm. Roll length - 20000 mm. Three-layer, with two cascades of different density and a support grid. Impregnated with sticky liquid for better binding of dry dust. Z65 fiberglass 65 mm thick Possible widths: 650–750–1000–1500 -2000 mm. Roll length - 20000 mm. Floor filter for trapping paint residues. Z65 fiberglass 100mm thick, width 1000mm. Roll length - 20000 mm. The same, but with a higher dust capacity.

Filter class - F5, F6, F7, F8, F9EN 779:2002, GOST R EN 779-2007 Filter material does not contain substances hazardous to the environment (Okotex-100 Class I) Disposal - similarly with construction waste Material fire safety class - FI no DIN53438 (flammable) Effective in severe aerodynamic conditions; has a compact design and high cleaning efficiency; has high performance; environmentally safe. The filter material is a pleated filter paper made from ultra-fine glass fibers. The material does not absorb moisture and dries quickly, restoring its original properties in full. Average cleaning efficiency (class F9) > 95.0%, for particles up to 0.2 microns - 99.97%. Application: - for cleaning dust from outdoor and recirculation air in supply ventilation systems; - as filters of the second stage of purification in multistage filtration systems; - in ventilation systems of the pharmaceutical and food industries, in foundries and nuclear industries, in gas turbine and compressor installations, as final air purification in hospitals and mushroom farms. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for air purification in supply and exhaust ventilation and air conditioning systems, and due to the presence of a non-woven filter material, they have a developed dust absorption surface. The presence of a support grid on the air outlet side guarantees performance under heavy loads. They are installed in places with a lack of working volume for placement and a large dust load. Filter designation scheme — FVS-G4-W x H x Lr, where: FVS — pleated air filter; G4 - filter class; W is the filter width; H-height of the filter; Lr is the frame width. When ordering, please inform: - Filter class - The width of the filter along the frame (across the corrugations, W), corresponds to the space of the niche, i.e. the length of the guides - The height of the filter along the frame (along the corrugations, H), corresponds to the size between the installation guides - The width of the frame (determines the seat in the guides, Lr) Let's make it according to individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Are intended for rough cleaning of the air given in systems of ventilation and air conditioning. The filter material is protected on both sides by a metal or plastic mesh. It is installed, as a rule, in places where large fractions (stones) can hit the filter, as well as when there is not enough space for the filter. Filter designation scheme — FVP-G4-W x H x Lr, where: FVP — panel air filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr is the frame width. When ordering, please inform: — Filter class — Filter frame width (corresponds to the niche space, i.e. the length of the guides, W) — Filter frame height (corresponds to the distance between the installation guides, H) — Frame width (corresponds to the seat in the guides, L2) Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for cleaning dust from outdoor and recirculating air in supply ventilation and air conditioning systems, as well as in air preparation systems for paintwork. Filters of the following classes are produced: G3(EU3), G4(EU4), M5(EU5), M6(EU6), F7(EU7), F8(EU8), F9(EU9). The dimensions are determined by the design of the installation into which the filters are built. Filter designation scheme — FVK-G4-W x H x Lr-L-N, where: FVK-air pocket filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr - frame width; L is the depth of the pockets; N is the number of pockets. The frame of the pocket filter can be made of galvanized steel or wood. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

High-performance HEPA air filters are designed for final air purification in rooms with high requirements for air purity. The air filters are made using high quality structured filter material made of ultra-fine glass fibers packed in small pleats (mini-pleats) separated by separators. High quality filter materials. Let's make according to individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

We supply flocculants of the following brands: anionic flocculants - GREENLIFE A, cationic flocculants - GREENLIFE K, non-ionic flocculants - GREENLIFE N. This flocculant is used for treatment of recycled and waste water; sludge dewatering in public utilities; drinking water purification; in the oil and gas industry for enhanced oil recovery, for the preparation of water-based drilling fluids; in the mining industry for the enrichment of raw materials at any stage and for the dehydration of flotation concentrates, dehydration of tailings; in agriculture to increase the viscosity of water and create more porous soil; in the pulp and paper industry, anionic flocculants are used to maintain the high quality of paper produced while reducing the quality of raw materials; in construction for waterproofing and filling cracks, as well as adhesives in various construction and repair work.

Cam units can satisfy requirement of customers for module units on dies. Reduction of lead time, indirect costs, etc.  Contributes to die manufacturing of customers.  Material used steel S45C, SCM435, iron FC250, bronze and polyurethane Founded in 1982. Through perseverance, continuous improvement and creative innovation, the company has grown to become one of the leading manufacturer of components for Mould & Dies industry.   

Combined with the wear resistance of copper alloy and solid self-lubricating properties of the lubricant to use in the process of maintaining without refueling. Products are widely used in high-contained, intermittent or swing movement, material can also used in iron. Founded in 1982. Through perseverance, continuous improvement and creative innovation, the company has grown to become one of the leading manufacturer of components for Mould & Dies industry.   

Dadco's Sectional Mounting System - Internal is an increasingly popular alternative to conventional manifold systems. It utilizes Dadco gas springs mounted to a base plate and all the connecting passages are drilled within the plate, obviating the need for external hose and fittings. Dadco sectional mounting system is less expensive, performs better and is easier to maintain than conventional manifold systems. Founded in 1982. Through perseverance, continuous improvement and creative innovation, the company has grown to become one of the leading manufacturer of components for Mould & Dies industry.   

As the leader in the industry Dadco's expertise is demonstrated in the comprehensive range of nitrogen gas springs extending from 10 pounds to 22 tons. Founded in 1982. Through perseverance, continuous improvement and creative innovation, the company has grown to become one of the leading manufacturer of components for Mould & Dies industry.   

Dayton Strippers are characterized by their long life, high stripping force, and exceptional quality. Three different standard sizes are available. Strippers can be supplied as semi-finished material with the trimming outlined. Founded in 1982. Through perseverance, continuous improvement and creative innovation, the company has grown to become one of the leading manufacturer of components for Mould & Dies industry.