Turbo deflector galvanized Ventale 100 - 91141

Plastic ventilation grill - round perfect for covering holes in the wall, in the ceiling or for closing the ventilation duct Made of high quality ABS material. Environmentally friendly, durable. For connection to 125 mm round ducts, mounting with a mounting flange

Exhaust grille R-30 is used in forced and natural ventilation systems, it is used to decorate the inlet / outlet of the ventilation duct. The standard white color allows it to fit into any design. Louvers provide airflow at an optimal angle, protect from dust and debris. The dimensions of the product are 200x300 mm, it is made of ABS plastic, fixed with glue or with screws. Advantages: 1. low price; 2. attractive appearance; 3. Easy assembly and disassembly.

Stainless steel air conditioning grilles both in a finished design and for an individual order.

Drip catcher Floor filter G65 – 75mm thickness Width 750 – 1000mm. Roll length - 20000 mm. Glass fiber filter impregnated with sticky liquid for binding dry dust. Pre-filter G3(EU3), G4(EU4) Width 2000 mm, roll length - 30000 mm To protect the ceiling filter type NF 600 or NF 300 in order to increase the service life Corrugated cardboard filter Height 750 - 900 - 1000 mm. (in a package of 10 sq.m.) It is used for high loads on paint particles. Capacity up to 18 kg of paint per 1 sq.m. EXP paper filter Width 1000 mm, roll length - 12000 mm Unique multi-layer paper filter (used in the USA) NF600 "ceiling filter" Possible dimensions in width 1200 - 1430 - 1650 - 2000 - 2100 mm. Roll length - 20000 mm. Three-layer, with two cascades of different density and a support grid. Impregnated with sticky liquid for better binding of dry dust. Z65 fiberglass 65 mm thick Possible widths: 650–750–1000–1500 -2000 mm. Roll length - 20000 mm. Floor filter for trapping paint residues. Z65 fiberglass 100mm thick, width 1000mm. Roll length - 20000 mm. The same, but with a higher dust capacity.

Filter class - F5, F6, F7, F8, F9EN 779:2002, GOST R EN 779-2007 Filter material does not contain substances hazardous to the environment (Okotex-100 Class I) Disposal - similarly with construction waste Material fire safety class - FI no DIN53438 (flammable) Effective in severe aerodynamic conditions; has a compact design and high cleaning efficiency; has high performance; environmentally safe. The filter material is a pleated filter paper made from ultra-fine glass fibers. The material does not absorb moisture and dries quickly, restoring its original properties in full. Average cleaning efficiency (class F9) > 95.0%, for particles up to 0.2 microns - 99.97%. Application: - for cleaning dust from outdoor and recirculation air in supply ventilation systems; - as filters of the second stage of purification in multistage filtration systems; - in ventilation systems of the pharmaceutical and food industries, in foundries and nuclear industries, in gas turbine and compressor installations, as final air purification in hospitals and mushroom farms. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for air purification in supply and exhaust ventilation and air conditioning systems, and due to the presence of a non-woven filter material, they have a developed dust absorption surface. The presence of a support grid on the air outlet side guarantees performance under heavy loads. They are installed in places with a lack of working volume for placement and a large dust load. Filter designation scheme — FVS-G4-W x H x Lr, where: FVS — pleated air filter; G4 - filter class; W is the filter width; H-height of the filter; Lr is the frame width. When ordering, please inform: - Filter class - The width of the filter along the frame (across the corrugations, W), corresponds to the space of the niche, i.e. the length of the guides - The height of the filter along the frame (along the corrugations, H), corresponds to the size between the installation guides - The width of the frame (determines the seat in the guides, Lr) Let's make it according to individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Are intended for rough cleaning of the air given in systems of ventilation and air conditioning. The filter material is protected on both sides by a metal or plastic mesh. It is installed, as a rule, in places where large fractions (stones) can hit the filter, as well as when there is not enough space for the filter. Filter designation scheme — FVP-G4-W x H x Lr, where: FVP — panel air filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr is the frame width. When ordering, please inform: — Filter class — Filter frame width (corresponds to the niche space, i.e. the length of the guides, W) — Filter frame height (corresponds to the distance between the installation guides, H) — Frame width (corresponds to the seat in the guides, L2) Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for cleaning dust from outdoor and recirculating air in supply ventilation and air conditioning systems, as well as in air preparation systems for paintwork. Filters of the following classes are produced: G3(EU3), G4(EU4), M5(EU5), M6(EU6), F7(EU7), F8(EU8), F9(EU9). The dimensions are determined by the design of the installation into which the filters are built. Filter designation scheme — FVK-G4-W x H x Lr-L-N, where: FVK-air pocket filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr - frame width; L is the depth of the pockets; N is the number of pockets. The frame of the pocket filter can be made of galvanized steel or wood. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Turbo deflector Ventale. Features of the model: roofing element of natural ventilation. It is made of galvanized steel or black steel with subsequent powder coating in the color according to the RAL catalog. Why: installed to enhance the natural draft in the ventilation duct. Improves circulation of fresh air in rooms. From what: it is made of galvanized or cold-rolled steel by laser cutting, the parts are bent on a CNC press brake, assembled by contact or semi-automatic welding, followed by polymer powder painting.

DESCRIPTION Industrial water spray cooling fans are designed for spraying of humidified and cooled air on workplaces in hot workshops of iron and steel, coke-chemical and machine-building plants and for other similar purposes (at the ambient temperatures of up to +40°C).    Industrial water spray cooling fans are installed near equipment generating maximum heat: dryers, rollers, calenders, vulcanizing and hydraulic presses, etc. The industrial fans are used at mining and processing plants, metallurgical plants and just for cooling hot workshops or production facilities in hot weather. It is often used as Man cooler in hot workshops if water feed is cut off or the model initially is without water feed.    Setup and Principles of Operation The industrial water spray cooling fan has a vertical design and consists of the following main units: axial fan, support, housing, compressed air supply cock, water supply cock, nozzle, and guard.   After turning on the industrial water spray cooling fan, the cocks regulate the compressed air supply, and the water is evenly supplied in the amount sufficient for humidification.   The industrial water spray cooling fan without the water supply is used as a blower fan at enterprises of other industries. Industrial Man cooler is used at workshops without conditioner.    Terms of Use ambient temperature from -40°C to +40°C, relative humidity up to 80% at 25°C in a temperate climate.

ESCRIPTION The air heating unit worms the air using the heat of hot or overheated water or steam coming from external sources of heat supply and is designed for air heating (including standby heating) of industrial premises, the technological process of which is not accompanied by any release of dust or explosive gases.  The unit should be operated in areas with a temperate climate. The heat transfer agent temperature should not be higher than 180°C and the pressure should be not higher than 1.2 MPa.  Principle of operation: When the fan is in operation, the air is taken from the room and heated up as it passes through the air heater. Air heater consists of finned tubes with working media hot water or steam. Then it is ducted through the fan working wheel blades into the heated area.   If heat transfer agent change on cool fluid then the unit works as cooling equipment.

We manufacture Explosion proof and Corrosion resistant radial Fans. Copper inserts at blades of working wheels, pulleys and other parts exclude spark appearance. Explosion-proof motor. The body of the fan is manufactured from AISI 304. According to the customer needs we make belt drive for easy maintenance. Rated diameter of working wheels is up to 2400 mm.