ПГ ВЕКПРОМ, ООО

Double Acting Hammer Press Hole capability up to 27 mm Modern design Intelligent progressive feed control with automatic load sensing Indication of the operating mode Protection against accidental activation Convenience of transportation in non-working position Availability of connection connectors Choice of dies and punches of various shapes Compact mobile hydraulic power unit Features Features PRO 60 HP model PRO 110 HP model Max. throat depth 60 mm 110 mm Max. round hole diameter 27 mm 27 mm Max. oval hole diameter 25 × 18 mm 25 × 18 mm Hole punching time 5 s 8 s Max. material thickness 13 mm 16 mm Punching force 35 tons < td> 47 tons Working pressure 700 bar 700 bar < td> Press weight without hydraulic unit 20 kg 35 kg

The IDK-1 manual circular cutter has a 600 mm clamping recess and a 200 mm jaw Reliable rigid construction Suitable for work on open construction sites Rollers made of high quality tool steel Stop for centering the workpiece before cutting Characteristics type of drive Manual Metal thickness (400 N / mm2), mm 1.0 Diameter range, mm up to 1000 Length mm 1200 Width, mm 200 Height, mm 350 Weight, kg 45

Multifunctional welding carriage HIT-18-1SD-2 for fillet welding. Suitable for welding T-shaped steel sections, H-shaped steel sections, plates, etc. Used in steel structure manufacturing, shipbuilding, bridge building, automobile manufacturing, power engineering, etc. This welding carriage enables intermittent welding. The length of the spacing between welds is precisely adjustable. This model will meet technical requirements, reduce deformation of the workpiece and reduce material consumption. Applicable material is carbon steel, applicable wall thickness is 4-16mm. The carriage is designed for horizontal fillet welding. It is used for welding products with a minimum radius of curvature R ≥ 500 mm. The maximum height of the angular rise during the welding process is 8 mm. Uses a welding power source for gas shielded arc welding. Benefits: The welding power source can operate in 2/4 cycle mode. The automatic welding carriage allows you to set the start / stop times. All parameters are provided with LED indicators and the ability to fine-tune Suitable for horizontal fillet welding. The welding torch is located at the extreme point of the carriage, thus preventing the accumulation of heat and reducing the electromagnetic field when the torch reaches the center of the work piece Dust-proof internal drive system, anti-magnetic design, long carriage life A gear train is used. Prevents play compared to chain drive It is used for welding circular seams with a diameter ≥ 1000 mm Intermittent welding possible Characteristics HIT-18-1SD-2 Supply voltage 220/24 V Power consumption 25 watts Travel speed 0-900 mm / min Burner adjustment up down 55 mm left / right 65 mm angle 360 degrees Weight 10.3 kg Dimensions, LxWxH 380х215х350 mm

Desktop vertical drilling machine 2N125L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 3 for tool mounting. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Right / left direction of spindle rotation Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 550 watts Max. Drilling Ø 25 mm Max. Deep hole drilling 18 mm Spindle MK 3 Spindle axis overhang 190 mm Moving the quill 80 mm Spindle speed 210 - 2220 rpm Number of speeds 12 Table size 270 x 270 mm T-slot size 15 mm Maximum distance from spindle to table 780 mm Base size 500 x 300 mm Maximum distance from spindle to base 1220 mm Column diameter ø 70 mm dimensions 690 x 390 x 1570 mm Machine weight 60 Kg

Desktop vertical drilling machine 2N116L is designed for drilling, reaming, countersinking and countersinking holes. The design provides a standard Morse taper 2 for fastening the tool. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 450 watts Max. Drilling Ø 16 mm Max. Deep hole drilling 15 mm Spindle MK 2 Spindle axis overhang 125 mm Moving the quill 65 mm Spindle speed 660 - 2500 rpm Number of speeds five Table size 200 x 200 mm T-slot size 14 mm Maximum distance from spindle to table 390 mm Base size 160 x 170 mm Maximum distance from spindle to base 525 mm Column diameter ø 60 mm dimensions 510 x 270 x 820 mm Machine weight 36 kg

Desktop vertical drilling machine 2N114L is designed for drilling, reaming, countersinking and countersinking holes. The drilling depth is limited by the movement of the spindle axis, but in some cases it can be increased by moving the quill. The control is carried out in manual mode and allows using various materials (metal, wood, plastic, etc.) as blanks. It is widely used in one-off and small-scale production. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Precision quick-change chuck included: radial runout of the clamped tool less than 0.080 mm Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient electric motor with aluminum housing and forced cooling Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 350 watts Max. Drilling Ø 14 mm Max. Deep hole drilling 12 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 330 mm Base size 140 x 180 mm Maximum distance from spindle to base 440 mm Column diameter ø 46 mm dimensions 420 x 230 x 700 mm Machine weight 21 kg

Vertical drilling machines belong to the second group of metal-cutting machines. The main components are: base plate, bed, table, motor, gearbox, spindle and feed mechanism. The ability to perform the following operations: Drilling (through, blind) Boring (countersinking, reaming) Threading Countersinking They are widely used in all branches of mechanical engineering from single piece to mass production. Versatility of the processed material: metal, wood, plastic, etc. Benefits: Reliable and inexpensive workshop machine The spindle is mounted on high precision ball bearings High spindle rotation accuracy: radial runout less than 0.030mm Drill chuck included Adjustable drilling depth stop Comfortable, ergonomic handle for quill feeding High quality GATES timing belts eliminate slippage and power loss Smooth running thanks to brushed aluminum pulleys Quiet and efficient forced-cooled electric motor Precise work table with diagonal T-slots Work table tilts ± 45 ° and rotates 360 ° Gear mechanism of vertical movement of the table Massive large-size base with longitudinal grooves and stiffeners Convenient IP54 control panel with separate emergency button Large protective screen with limit switch Belt guard limit switch Time-tested quality Characteristics Engine 300 watts Max. Drilling Ø 13 mm Max. Deep hole drilling 11 mm Spindle B16 Spindle axis overhang 104 mm Moving the quill 50 mm Spindle speed 520 - 2620 rpm Number of speeds five Table size 160 x 160 mm T-slot size 14 mm Maximum distance from spindle to table 240 mm Base size 135 x 175 mm Maximum distance from spindle to base 325 mm Column diameter ø 46 mm dimensions 420 x 220 x 580 mm Machine weight 19 kg