ПраймКемикалсГрупп, ООО

An adapter used to connect various pipes, straight and seamless. Material - high quality polypropylene, resistant to many aggressive substances. Withstands high heating temperatures, so it can be hot steam treated and autoclaved. When autoclaving, it is necessary to set the standard mode - 1 atm, 110 ° С. Polypropylene adapters are of high quality and durable, therefore they are widely used for connecting pipes. Characteristics Nominal outer diameter, mm 8/9/10 Hole, mm 4.5 Outer ridge diameter, mm (max./min.) 6,3 / 9/11

A nylon bristle brush designed for thorough cleaning of the inside of bottles and other narrow pharmaceutical laboratory vessels. Wire handle. A convenient high-quality brush with soft synthetic bristles will be extremely useful wherever there is a need to clean narrow and long dishes - in the laboratory, in production, in the food industry, etc. Characteristics Length mm 320 Working part length, mm 100 Working part diameter, mm 60

The long, small diameter brush is designed for thorough cleaning of the interior of test tubes and other small, narrow dishes. The soft synthetic bristles (nylon) will not scratch the glass or plastic of which the container is made. A convenient high-quality ruff is indispensable not only in pharmacy and chemical laboratories, but also everywhere where reusable narrow-shaped or narrow-necked dishes are used for various jobs. Characteristics Length mm 280 Working part length, mm 100 Working part diameter, mm 25

An important component of the vacuum pump, a tube with the largest diameter of 14.5 mm and the smallest diameter of 9 mm. Has a length of 37 cm. Polypropylene is a modern, high-quality and durable material, therefore both polypropylene vacuum pumps and tubes made of this material serve for a long time and do not present any difficulties in their care. In the Prime Chemicals Group store, you can buy the pump itself, of which this tube is a part. Characteristics Manufacturer country Italy Length mm 37 Largest / smallest diameter, mm 14.5 / 9

Disposable pipette used for serological testing. Sterilized by gamma rays, sold individually. Graduation is applied with black indelible paint. At the top end there is a filter, the color of which is regulated by international standards. For serological pipettes with a volume of 2 ml, it was found that they are equipped with a green filter. The product is not cytotoxic, pyrogen-free, and has no hemolytic effect. The main overflow scale continues with a negative scale. Made of modern material - crystalline polystyrene. Registration certificate No. FSZ 2012/11857 dated March 28, 2012 Characteristics Manufacturer country Russia Volume, ml 2 Division value, ml 0.1 Length mm 278 Nominal outer diameter, mm 6.5

The conical plug with a ground cut has an ergonomic shape that makes it easy to remove from the container. Suitable for use with any container, the neck of which fits the cork in size. Suitable for sealing vessels containing easily evaporating, volatile substances. Also protects the contents of vessels from debris and dust. If the container tilts or even falls without breaking, the stopper will prevent its contents from falling out or flowing out.

Samples, materials and samples of various substances are usually stored in sealed tubes. Because tubes are often sold without caps, they must be purchased separately. Made of high quality polyethylene, these covers are an excellent choice. The well-thought-out shape of the stoppers allows you to easily and quickly seal the tube, and if necessary, you can open it without effort. The stopper fits snugly against the tube so that the contents of the container will not spill. The corks are multi-colored, so they can serve as additional filters to help differentiate the contents and reduce the risk of accidentally picking up the wrong tube. Registration certificate of stoppers for 16 mm test tubes - No. FSZ 2011/09223 dated February 25, 2011

Laboratory jar with graduation. A 50 ml vessel is made of durable polypropylene and can be used for storing liquid and bulk substances. The wide mouth with a diameter of 24 mm makes it easy to place substances in the vessel and to remove them with the same ease. This container can withstand high temperatures, which allows it to autoclave, and also to pour hot liquids inside. The product is universal, it can be used for various research or production work. Due to the strength and wear resistance of the material, the can will last a long time. Characteristics Manufacturer country Italy Volume, ml 50 Height, mm 88 Throat diameter, mm 24 Division value, ml ten

A plastic measuring cup is a convenient tool for a laboratory assistant. It is made of high quality stabilized polypropylene, which is hard, heat and chemical resistant. It can be used in much the same way as a glass beaker, it cannot only be heated on stoves and burners. Can be sterilized in an autoclave or by boiling, since the permissible temperature for long-term operation without consequences for the product is up to +130 ° C. The glass is equipped with a handle, a spout and a relief measuring scale in milliliters. The scale is approximate. The container is suitable for working with various materials in liquid and free-flowing form, for preparing solutions, filtering, settling liquids with sediment. Characteristics Volume, ml 500 Height, mm 115 Throat diameter, mm 85 Division value, ml 25

Laboratory wash bottle for rinsing dishes, glass tubes, various devices. Design features: The base of the wash bottle is a 1 liter plastic bottle with a screw cap and a tube with a tapered tip that provides a firm and strong stream of washing solution. The bottle is cylindrical, 245 mm high (with the tube) and 90 mm in diameter. The tube is curved and narrow, can be inserted into glass tubes. Materials: made of translucent white polyethylene, resistant to most acids, even concentrated (except nitric), alkalis, salt solutions. The wash bottle is supplied fully equipped, with its help you can not only rinse the dishes, but also clean them from sediments, deliver the cleaning solution to hard-to-reach places. Registration certificate No. FSZ 2012/11857 dated March 28, 2012 Characteristics Volume, ml 1000 Height, mm 245 ± 1 (total) Throat diameter, mm 20 (internal) Division value, ml 100 Nominal outer diameter, mm 90

Полиэтиленовая промывалка — простое и удобное приспособление. Ею можно ополаскивать лабораторную посуду или доставлять очищающий раствор в места, до которых сложно добраться иным способом, чем направленной струей чистящего средства.Промывалка состоит из:— сосуда;— завинчивающейся крышки; — канюли, вставляющейся в сосуд через крышку.На стенки сосуда снаружи нанесена рельефная градуировка объема в миллилитрах. Канюля изогнута для удобства эксплуатации.Помывалка изготовлена из полужесткого полиэтилена. Оно легко сжимается для создания сильной направленной струи ополаскивателя или очистителя.Полиэтилен устойчив к воде, щелочам, большинству кислот, органическим растворителям.ХарактеристикиОбъем, мл 250Высота, мм 170±1Диаметр горла, мм (внутренний) 16Диаметр рабочей части, мм 62

Высокий цилиндр с мерной рельефной шкалой, носиком и широким шестиугольным основанием – стандартный лабораторный инструмент, используемый для точного измерения объемов жидких веществ.Данное изделие изготовлено из полупрозрачного полипропилена. К его достоинствам можно отнести небольшой вес, удобство в эксплуатации (его трудно разбить), устойчивость к неконцентрированным кислотам, щелочам и солям. К недостаткам – старение под действием ультрафиолетовых веществ и органических растворителей.Цииндр можно стерилизовать кипячением.ХарактеристикиСтрана - производитель РоссияОбъем, мл 100Высота, мм 246Цена деления, мл 1Диаметр рабочей части, мм 28 (внутренний)