Hot water boiler "Bratsk-0.8" (KVm-0.8) - 67083

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

Nickel Plated Brass Manifold for Floor Heating System The main function of copper water distributor is to achieve control of water flow. When there are more pipes connected, it is often necessary to achieve the goal through the coordination of other auxiliary accessories. Material: Brass body with surface nickel-plated Working Pressure: 16 bar Connection End: Thread Function: Industrial, Kitchen, Home, Commercial, Garden and General Certificate: SGS, ISO9001, ISO14001, CE Valve guarantee: 10 Years

This manual radiator valve has an angle pattern. The radiator valve can connect to copper, plastic, and multi-layer pipe. It has gland sealing double O-ring. Material: Forged brass Pattern: Angle pattern Port: 2-way Fields of Applications: Water, Hot water Maximum Working Pressure: 16 bar Control temperature range: 6 °C- 28°C Working temperature: -10ºC to 110ºC Connection way: Male Thread With ISO228 (BS2779), Other optional connection way: Clamp , solder, loose joint, and PEX connection Certificate: CE,SGS , ISO9001 <>

Logistic Auto LLC is a major supplier and exporter of milled peat. We invite you to conclude a contract for the supply of milled peat with the following characteristics: High separated peat in big bags with a volume of 5000 liters. Characteristics: pH aqueous 3.5-4.5% - acidic 5.5-6.5-neutralized. Humidity no more than 65% * separated peat, acidic 8 separated peat, neutralized.

Charcoal briquettes are a high-quality fuel and can also be used in the production of crystalline silicon to replace part of the lump charcoal. Briquettes have high mechanical strength (6.9-9.8 MPa), increased density (0.9-1 g/cm3), high calorific value (30,000-32,000 kJ), and low hygroscopicity. Charcoal briquettes are a modern high-calorie biofuel produced using special equipment from charcoal screenings using the pressing method. The plant origin of the raw materials provides this fuel with exceptional environmental friendliness when used in any required quantity. Charcoal fuel briquettes are the same charcoal, only compressed. Food starch is used as a binder. A positive aspect when using charcoal briquettes as fuel is their minimal impact on the environment during combustion compared to classic solid fuel (no slag, increased smoke, and other carcinogenic substances). They combine all the advantages of charcoal, while having undeniable advantages.

We are a Supplier of wholesale and distributor of wood pellets, we offer EN plus A1 wood pellets in 15 kg bags. There is a possibility of delivery in the form of a big bag available in the amount of 500 tons/month. All There are 70 bags of 15 kg (1050 kg) on ​​the pallet. There is a possibility of delivery directly to the place indicated by the customer.

Wood pellets class A1. Diameter: 6mm-8mm. Low dust content <1% High ash melting point >1200°C. Made from the finest virgin forests. Categories: Energy, WOODEN PELLETS. Description: 6 mm wood pallets are a convenient, economical and effective way to heat your home or company using domestic and external fuel. 6mm softwood pallets: hardwoods such as maple, oak, birch and ash. We all know that we need to place conifers such as pine, fir and spruce. Consumption of wood pellets in Europe: The majority of consumption is for heat production, accounting for 61.8%. The consumption of pallets for heating can be divided into three markets: home heating (69%), commercial heating (19%) and heat generated by combined heat and power plants (12%). The remaining 38.2% of wood pallets were used for energy production. It is important to note that technologies for producing energy from pallets into heat, electricity or both are mature and offer efficient and reliable processes. Benefits of 6mm thick wood pallets: If you want a reliable source of heat, save money and help protect the environment, 6mm thick biomass wood pallets are a great choice. When pallets are burned, they release the same amount of carbon dioxide that woody biomass absorbs during growth, making them carbon neutral.

Air heating may be needed in both domestic and industrial environments. To do this, you need to use a special air heating element, which will successfully cope with tasks of any complexity. If you want to buy high-quality dry electric air heating elements, the price of which will be reasonable, PC "Marion" is ready to offer you its services. Our company practices an individual approach to the situation of each client. Technical characteristics: - Length of the heating element (length of the metal shell of the heating element when unfolded) up to 6000mm - Diameter of the heating element tube: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm - Shape and configuration of heating element: any, specifying dimensions or according to drawings and sketches. - Power: calculated taking into account the operating parameters of the heating element. depending on diameter, tension, length. - Working environment: air and other gases and mixtures of gases, casting molds, compression molds, defrosting refrigeration units. - Voltage: on request 12; 24; 36; 42; 48; 60; 127; 220; 380. - Options or material for manufacture: stainless steel, carbon steel, titanium, seamless stainless steel. - Contact group options for connection: threaded rod, flat pin contact, welded insulated wire with or without a sealed rubber coupling and other options on request. - Mounting strips: if necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes. - Complete with threaded fittings: m18, m12, m10, m14 and others. materials - stainless steel, brass, carbon steel.

At Marion you will find a wide range of water heating elements of various price categories. The company's warehouse has heating elements of various shapes and designs, and you can also order the production of heating elements to order. The price of such a device is quite reasonable and fully corresponds to its high quality. Manufactured according to GOST from high quality materials. Production time according to specifications is 7-10 days. Urgent production by agreement. Shipment of warehouse items on the day of payment Availability of certificates. 12 month warranty. Additional discounts for orders of 10 pieces or more. Regular customers receive various bonuses, discounts, deferred payment, free delivery. Delivery to any city in Russia. Material: Carbon steel; Stainless steel; with fins; with Teflon coating; seamless pipe; in a fluoroplastic shell.

Heating element for oil of the highest quality. Technical characteristics: Heating element length (length of the metal shell of the heating element when unfolded) up to 6000 mm. Heating element tube diameter: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm (on request we can produce other diameters that differ from GOST) Shape and configuration of the heating element: any, specifying the dimensions or according to drawings and sketches. Power: Calculated taking into account the operating parameters of the heating element depending on diameter, voltage, length. Working medium: solution of alkalis and acids; air and other gases and mixtures of gases; Fats, oils and other viscous liquids; alkali; Low-melting Metals; Aggressive solutions of alkalis and acids; Voltage: On request 12; 24; 36; 42; 48; 60; 127; 220; 380. Options or material for construction: Stainless steel, carbon steel, finned, titanium, PTFE sheathed, Teflon coated, seamless stainless steel. Contact group options for connection: Flat pin contact, welded insulated wire with and without a sealed rubber coupling, threaded rod and other options on request. Mounting strips: If necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes.